Skip to content

Break Even Calculator

How many units must you sell before you stop losing money? Enter your fixed costs, your variable cost per unit, and your selling price, and this calculator works out your break-even point in units and in revenue, your contribution margin, and your margin of safety. Add your current volume to see your profit or loss today, and a target profit to see how much you must sell to reach it.

Rent, salaries, insurance, and other costs that stay the same no matter how much you sell, in dollars for the period.

Materials, packaging, and other costs for one unit, in dollars. This is the cost of making or buying one more unit.

What the customer pays for one unit, in dollars. It must be above the variable cost per unit, or the business never breaks even.

How many units you sell in the period now, or expect to sell. Leave it blank to skip the margin of safety and profit figures.

The profit you want to make in the period, in dollars. Leave it blank to see only the break-even point.

Your break-even point

Your calculation, step by step

    Profit at nearby volumes

      This tool provides estimates for general guidance only. It works out the break-even point from the figures you enter and assumes costs and prices stay steady over the period, so treat the answer as an estimate and check it against your own books before making business decisions. It is not financial advice.
      Quick answer: Divide your fixed costs by your contribution margin per unit, which is the selling price minus the variable cost per unit. With fixed costs of $10,000, a $50 price, and a $30 variable cost, the contribution margin is $20 and the break-even point is 500 units, or $25,000 of revenue. This calculator shows the exact and whole-unit break-even points, the break-even revenue, your profit at your current volume, and your margin of safety, with every step shown.

      Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

      How to use the Break Even Calculator

      Every business has a line in the sand: the sales level where total revenue exactly covers total costs, and the business makes neither a profit nor a loss. Below that line, every month ends in the red. Above it, every extra sale adds profit. That line is the break-even point, and this calculator finds it in units and in revenue, along with the contribution margin behind it and the margin of safety above it.

      You need three numbers to start: your fixed costs for the period, your variable cost per unit, and your selling price per unit. Fixed costs are the bills that arrive whether you sell one unit or one thousand: rent, salaries, insurance, loan payments. Variable costs are the costs of one more unit: materials, packaging, the commission on that sale. Everything else the calculator shows follows from those three numbers by arithmetic you can check by hand.

      1. Enter your fixed costs per period. Add up every cost that stays the same across the period you are measuring, a month, a quarter, or a year, and enter the total in dollars. The period you choose is the period your answer describes: monthly fixed costs give a monthly break-even point, yearly fixed costs give a yearly one. Pick one period and use it for every figure on the page.
      2. Enter your variable cost per unit. This is what one more unit costs you to make or buy: raw materials, direct labor on that unit, packaging, shipping for that unit. If a cost has a fixed part and a variable part, like a salesperson on a salary plus commission, split it: the salary goes into fixed costs and the commission goes here. AccountingCoach calls these mixed expenses.
      3. Enter your selling price per unit. This is what the customer pays for one unit. It must be above your variable cost per unit. If it is not, the calculator tells you plainly that the business never breaks even at that price, and explains why, instead of inventing a break-even point that does not exist.
      4. Add your current units sold, if you know them. This field is optional. Enter how many units you sell in the period now, or expect to sell, and the calculator adds your profit or loss at that volume and your margin of safety in units, in revenue, and as a percentage. Leave it blank and you get the break-even point alone.
      5. Add a target profit, if you have one. This field is also optional. Enter the profit you want to make in the period, and the calculator works out how many units you must sell to reach it, and the revenue that takes. Breaking even keeps the lights on; a target profit is what turns the business into a living.
      6. Read the results, then the steps. The headline answer is the number of whole units you must sell. Below it, the cards show the contribution margin, the contribution margin ratio, the exact and whole-unit break-even points, and the break-even revenue. The step-by-step breakdown shows every line of arithmetic, so you can check each figure against your own books. The table at the bottom shows your profit at nearby volumes.

      Try the example buttons under the form to see the calculator at work. The oil change shop is AccountingCoach's worked example: $3,000 of fixed costs a week, $20 of variable cost per car, a $50 price, and a target profit of $1,500 a week. The $100 product is Investopedia's example: $20,000 of fixed costs, $60 of variable cost, a $100 price. The fractional break-even shows what happens when the exact answer is not a whole number of units. Results update as you type, and nothing you enter leaves the page.

      How break-even math works

      Break-even analysis has five components, as Investopedia sets them out: fixed costs, variable costs, revenue, contribution margin, and the break-even point itself. The whole calculation rests on one idea: each unit you sell first pays its own variable cost, and whatever is left, the contribution margin, goes toward the fixed costs. When the contribution from all the units sold adds up to the fixed costs, you have broken even.

      The formulas, in plain words, are short enough to memorize. Contribution margin per unit equals the selling price per unit minus the variable cost per unit. Contribution margin ratio equals the contribution margin per unit divided by the selling price per unit, times 100. Break-even point in units equals total fixed costs divided by the contribution margin per unit. Break-even point in revenue equals total fixed costs divided by the contribution margin ratio, or, equivalently, break-even units times the selling price. Profit at any volume equals units sold times the contribution margin per unit, minus fixed costs. Units for a target profit equal fixed costs plus the target profit, all divided by the contribution margin per unit.

      Worked example, the standard case. A shop has fixed costs of $10,000 a month, a variable cost of $30 per unit, and a selling price of $50 per unit. The contribution margin per unit is $50 minus $30, which is $20. The contribution margin ratio is $20 divided by $50 times 100, which is 40 percent. The break-even point in units is $10,000 divided by $20, which is 500 units. The break-even revenue is 500 units times $50, which is $25,000, and the same figure comes from $10,000 divided by 40 percent. At 600 units, revenue is $30,000, variable cost is $18,000, total cost is $28,000, and profit is $2,000. The margin of safety is 100 units, $5,000 of revenue, and 16.67 percent of current sales.

      Worked example, the oil change shop. AccountingCoach works through a fictional business, Oil Change Co., with fixed expenses of $3,000 per week, variable expenses of $20 per car, and a price of $50 per car. The contribution margin per car is $50 minus $20, which is $30. The break-even point is $3,000 divided by $30, which is 100 cars per week, and the break-even revenue is 100 cars times $50, which is $5,000 per week. The owner wants a profit of $1,500 per week, so the target becomes $3,000 plus $1,500, which is $4,500, divided by $30, which is 150 cars per week, for revenue of $7,500 per week. At 150 cars the check is exact: revenue of $7,500 minus variable cost of $3,000 leaves $4,500 of contribution, minus $3,000 of fixed costs leaves $1,500 of profit.

      Worked example, a fractional break-even point. Change the variable cost in the standard case to $32 per unit, keeping fixed costs at $10,000 and the price at $50. The contribution margin is now $18, and the exact break-even point is $10,000 divided by $18, which is 555.56 units. You cannot sell 0.56 of a unit, so the calculator rounds up: you must sell 556 units. The break-even revenue is 556 units times $50, which is $27,800. The exact textbook revenue, from $10,000 divided by the 36 percent contribution margin ratio, is $27,777.78, which is $22.22 lower. The calculator shows both figures and names the gap, because the whole-unit revenue is the one you can actually collect: selling 555 units leaves you $18 short of covering the fixed costs.

      Worked example, the round-up in real life. A business school seminar in the Lumen Learning textbook charges $650 per person, with variable costs of $80 per person and fixed costs of $15,000. The contribution margin is $570 per person, and the exact break-even point is $15,000 divided by $570, which is 26.3 students. The school cannot enroll 0.3 of a student, so it should run the seminar only if it expects at least 27 students. The break-even point is a threshold, and falling one unit short of it still means a loss.

      Rounding. Money is rounded half up to the nearest cent, and a negative value rounds away from zero the same way, so a margin of safety of minus $100.005 becomes minus $100.01. Percentages are rounded to two decimal places. Units are rounded up to whole units whenever the question is how many you must sell, because a fraction of a unit cannot be sold. The exact fractional figure is always shown next to the whole-unit figure, and every printed equation balances on the numbers shown: break-even revenue is whole units times the price, margin of safety in revenue is current revenue minus exact break-even revenue, and profit is revenue minus total cost.

      What your result means

      The headline answer is the number of whole units you must sell in the period to break even. Read it as a floor, not a goal. Selling exactly that many units leaves you with nothing: no profit, no loss, and no money for the owner. The useful question is how far above the floor your realistic sales sit, and what happens if they fall short, which is what the rest of the results answer.

      The contribution margin per unit is the engine of the whole calculation. It says how much each sale leaves toward fixed costs after paying its own variable cost. A $20 contribution margin means each unit knocks $20 off the fixed-cost bill, and the first 500 units in the standard example exist only to pay the $10,000 of fixed costs. The contribution margin ratio says the same thing as a share of each sales dollar: at 40 percent, 40 cents of every dollar goes toward fixed costs and profit, and 60 cents pays variable costs. When the ratio is high, each sale works hard, and the break-even point is low.

      The exact break-even point and the whole-unit figure answer two different questions. The exact figure, 555.56 units in the fractional example, is the mathematical point where revenue equals total cost. The whole-unit figure, 556 units, is what you must actually sell: at 555 units the business is still $18 short. The calculator shows the exact revenue figure too, $27,777.78 in that example, and the whole-unit revenue of $27,800, which is the revenue you can actually collect. When the exact point is already a whole number, both figures agree.

      The profit or loss at your current volume is the bottom line of the period, on the figures you entered. It is revenue minus total cost, where total cost is fixed costs plus variable cost at that volume. The size of the profit or loss is set by the distance from break-even times the contribution margin: each unit above break-even adds one contribution margin to profit, and each unit below it subtracts one. In the standard example, 600 units is 100 units above break-even, and 100 units times the $20 contribution margin is the $2,000 profit.

      The margin of safety, covered in its own section below, is the cushion between where you are and where you start losing money. The target-profit figures turn the question around: instead of asking where you stop losing money, they ask how much you must sell to make the profit you want. If the target volume is far above what you can realistically sell, the honest conclusion is that the price, the costs, or the target has to change.

      If the calculator says the business never breaks even, that is a result, not an error. It means the selling price does not cover the variable cost per unit, so each sale adds nothing, or less than nothing, toward fixed costs. No volume of sales fixes that: selling more only deepens the loss. The fix is one of three things: raise the price above the variable cost, cut the variable cost below the price, or do both. Until one of those changes, the break-even point does not exist.

      Contribution margin explained

      Contribution margin is the most useful number in small-business pricing, and the most commonly confused with profit. It is not profit. It is what each sale leaves after paying the variable cost of that sale, available to cover fixed costs and, once those are covered, to become profit. Investopedia defines it as the difference between the selling price and the variable costs, and gives the example of an item selling for $100 with variable costs of $60: the contribution margin is $40. That $40 is not $40 of profit. It is $40 toward the rent, the salaries, and the insurance.

      The contribution margin comes in three forms, and each answers a different question. Contribution margin per unit, price minus variable cost per unit, tells you what one more sale is worth toward the fixed-cost bill. Total contribution margin, total revenue minus total variable costs, tells you what all the sales in the period leave toward fixed costs. Contribution margin ratio, contribution margin per unit divided by price, tells you what share of each sales dollar is contribution. In the standard example, the per-unit margin is $20, the total margin at 600 units is $12,000, and the ratio is 40 percent.

      The ratio is the form that travels best between businesses, because it does not depend on the size of the sale. A lemonade stand selling glasses at $3 with a variable cost of 25 cents has a contribution margin of $2.75 per glass and a ratio of about 91.67 percent, which is why a lemonade stand breaks even so fast: almost every dollar of sales goes toward the fixed costs. A business selling a $100 item with $60 of variable cost has a 40 percent ratio, so it needs two and a half dollars of sales to produce one dollar of contribution.

      Contribution margin is not the same as gross margin, and the difference matters. Gross margin is revenue minus the cost of goods sold, which usually includes some costs that do not vary with each unit, and it is reported on the income statement. Contribution margin subtracts only variable costs, including variable selling costs that gross margin leaves out, and it is a management tool rather than a reporting figure. For pricing decisions, the contribution margin is the one that counts, because it is the number that decides whether one more sale helps or hurts. Our Profit Margin Calculator works out the margin on each sale from revenue and cost, and our Markup Calculator sets a selling price from a target markup, which is the natural next step once you know the contribution margin you need.

      The contribution margin also decides how sensitive your profit is to sales. With a high margin, a small change in volume moves profit a long way: at a $570 contribution margin per student, the seminar gains or loses $570 of profit for every student above or below break-even. That is why businesses with thin margins live or die by volume, and why a small price rise can be worth more than a large sales push: a $5 price rise on a $30 variable cost lifts the contribution margin from $20 to $25, and cuts the break-even point from 500 units to 400 units.

      Margin of safety

      The margin of safety is the distance between where your sales are and where they would have to fall before the business starts losing money. It is the cushion, and it is the number that tells you how much risk you are carrying. The Lumen Learning textbook defines it as current sales minus break-even sales, and gives the example of a business with current sales of $120,000 and break-even sales of $100,000: the margin of safety is $20,000. As a percentage, called the margin of safety rate, it is the margin of safety divided by current sales, which in that example is $20,000 divided by $120,000, or 16.67 percent.

      The calculator shows the margin of safety in all three forms: in units, in revenue, and as a percentage. In units, it is your current units minus the exact break-even point. In revenue, it is your current revenue minus the exact break-even revenue. As a percentage, it is the margin of safety in revenue divided by your current revenue, times 100. The three forms are measured against the same exact break-even point, so a positive profit never comes with a negative margin of safety, and a loss never comes with a positive one. The units figure times the price comes within a few dollars of the revenue figure; the small gap is rounding, because the exact break-even point is shown to two decimal places. In the standard example at 600 units, the margin of safety is 100 units, $5,000, and 16.67 percent.

      A negative margin of safety means you are below break-even, and its size says how far short you are. At 300 units in the standard example, the margin of safety is minus 200 units, minus $10,000, and minus 33.33 percent: sales would have to rise by a third of their current level just to stop losing money. A margin of safety of zero means you are exactly at break-even: one unit fewer and the period ends in a loss. If you have no sales yet, the margin of safety in units and revenue still works, but the percentage cannot be worked out, because there are no sales to measure it against. The calculator says so instead of inventing a number.

      What counts as a safe margin depends on how steady your sales are. A business with contracted, repeating sales can live with a thin margin, because the sales are predictable. A seasonal business, or one that depends on a few large customers, needs a wide one, because a single lost order can wipe out the cushion. As a rule of thumb, a margin below 10 percent means a bad month can turn the period into a loss, and a margin above 30 percent means the business can absorb a serious sales drop.

      The margin of safety is also the right way to judge a price cut or a discount. A discount lowers the contribution margin, which raises the break-even point, which shrinks the margin of safety from both ends at once. Run the discounted price through the calculator before offering it, and check the margin of safety after the change, not just the break-even point.

      How to lower your break-even point

      There are only three levers on the break-even point: the price, the variable cost, and the fixed costs. Everything else is a version of one of those three. Take the standard example, fixed costs of $10,000, variable cost of $30, price of $50, break-even at 500 units, and move each lever in turn.

      Raise the price. A higher price lifts the contribution margin directly, and every dollar of price rise goes straight into the margin. Raise the price from $50 to $55 and the contribution margin goes from $20 to $25, so the break-even point falls from 500 units to 400 units. That is a 20 percent cut in the sales you need, from a 10 percent price rise. The catch is volume: a higher price can reduce the number of units you sell, and if volume falls by more than the break-even point does, profit falls too. Treat the new break-even point as the requirement the higher price has to meet, and judge honestly whether your sales can hold up.

      Cut the variable cost. A lower variable cost lifts the contribution margin by the same amount as a price rise of the same size, but without asking customers to pay more. Cut the variable cost from $30 to $25 and the contribution margin goes from $20 to $25, so the break-even point falls from 500 units to 400 units, exactly as the price rise did. The ways to cut variable cost are negotiation with suppliers, cheaper materials that do not hurt quality, less waste, and better processes. A dollar saved on variable cost is worth exactly a dollar gained on price, and it carries none of the volume risk.

      Cut the fixed costs. Lower fixed costs cut the break-even point in direct proportion: a 20 percent cut in fixed costs cuts the break-even point by 20 percent. Cut fixed costs from $10,000 to $8,000 and the break-even point falls from 500 units to 400 units. Fixed costs are harder to cut than variable costs, because they are usually contracts, rent, salaries, insurance, but they are also the lever that never touches the customer. Renegotiating a lease or moving to a smaller space lowers the floor the business has to clear every period. Our Budget Calculator can help you work through the fixed costs line by line and see which ones can move.

      Move all three at once. The levers combine, and small moves on each add up to a large change. Cut fixed costs to $8,000, cut the variable cost to $25, and raise the price to $55, and the contribution margin becomes $30, so the break-even point is $8,000 divided by $30, which is 266.67 units, rounded up to 267. That is nearly half the original 500 units, from three modest changes, none of which alone would look dramatic. Run each combination through the calculator and compare the break-even points side by side before deciding which changes to make.

      Change the product mix. A business selling several products has a break-even point for each product and one for the business as a whole, and the mix between them matters. Shifting sales toward the product with the higher contribution margin ratio lowers the overall break-even point without changing any price or cost. The Lumen textbook shows a cereal company with three products and a combined contribution margin ratio of 40 percent: with fixed costs of $50,000, break-even sales are $125,000. If the mix shifted toward the product with the 60 percent ratio, the combined ratio would rise and break-even sales would fall. This calculator works on one product at a time, so run each product through it separately and compare the ratios.

      Break-even vs payback

      Break-even and payback sound alike, but they measure different things, and confusing them leads to bad decisions. The break-even point is a sales level: how much you must sell in a period for revenue to cover all costs in that period, so profit is zero. The payback period is a length of time: how long it takes for an investment to return its initial cost in cash. AccountingCoach puts the distinction plainly: the break-even point is about net income on the income statement, worked out on the accrual method, while the payback period is about net cash inflows adding up to the initial cash investment.

      The payback period answers the question a break-even analysis cannot: you are about to spend money now, and you want to know when it comes back. Harvard Business School Online sets out the method: list the cash flows by period, starting with the initial investment as a negative cash flow, then add each period's net cash flow to find the cumulative total. The payback period falls between the last period with a negative cumulative total and the first period with a positive one, and the timing within that period comes from the formula: payback period equals the last period with a negative cumulative cash flow, plus the absolute value of that negative total divided by the cash inflow in the following period.

      Worked example, the bakery machine. Harvard Business School Online works through a bakery considering a machine costing $7,200 that would bring in $4,000 a year of net cash inflow for three years. The cumulative cash flow after year one is minus $7,200 plus $4,000, which is minus $3,200. After year two it is plus $800. So the payback period falls in year two, and the formula gives 1 plus $3,200 divided by $4,000, which is 1.8 years. The same project has a positive net present value of $3,692.99 at a 5 percent discount rate: payback says when the money comes back, and net present value says whether the project is worth doing at all. The payback calculation does not account for the time value of money, which is why Harvard Business School Online recommends using it alongside net present value, not alone.

      Use break-even analysis when the question is about running the business: what sales level covers costs, what price to set, whether a product is viable at its current volume. Use payback when the question is about spending money: whether to buy a machine, open a location, or launch a product, and how long the money is at risk. Our ROI Calculator works out the return on an investment over time, which is the natural companion to both, and our Percentage Calculator handles the percent steps in either calculation.

      One trap to avoid: a short payback period does not mean a business is profitable, and a low break-even point does not mean an investment pays back fast. A machine can pay for itself in eighteen months and still leave the business losing money every month if sales sit below break-even. Check both numbers before committing money, and never let one stand in for the other.

      Limits of break-even analysis

      Break-even analysis is a model, and like every model it is only as good as its assumptions. The most important assumption is that costs stay fixed over the period: fixed costs do not change, and variable cost per unit does not change. In real businesses both move. Rent rises, suppliers raise prices, wages go up, and a variable cost that was $30 a unit last year may be $33 this year. Investopedia names this as a core limitation: the analysis assumes fixed and variable costs remain constant, and it assumes a linear relationship between costs and production. Re-run the calculation whenever a cost changes, and never trust a break-even point worked out from last year's costs.

      The second assumption is that the price stays the same at every volume. In practice, selling more often means discounting, offering bulk prices, or spending more on promotion, all of which cut the effective price per unit. A business that breaks even at 500 units at $50 may find that reaching 600 units needs a $45 price, which changes the contribution margin and the break-even point. The calculator takes one price, so if your price varies by volume, work out the break-even point at each price separately and compare them, rather than trusting a single figure.

      The third assumption is one product. A business with several products has several contribution margins, and the overall break-even point depends on the mix between them. AccountingCoach warns that the formula is overly simplistic for a company with a wide variety of products with varying contribution margins, because a shift in the mix changes the answer without any price or cost changing. The Lumen textbook shows the multi-product method: work out the combined contribution margin ratio from total sales and total variable costs, then divide fixed costs by that ratio. That method needs the product mix to stay constant, which is itself an assumption to check. For Wonderfood, the cereal company, total sales of $100,000 and total variable costs of $60,000 give a ratio of 40 percent, so with fixed costs of $50,000 the break-even sales are $125,000.

      The fourth limit is that break-even analysis says nothing about demand. It tells you how much you must sell, not whether anyone will buy that much. Investopedia notes that the analysis ignores external factors such as competition, market demand, and changes in consumer preferences. A break-even point of 500 units is no comfort if the market only wants 300. Always pair the break-even point with a realistic sales forecast: the calculation sets the target, and the forecast says whether the target is reachable.

      Finally, remember that the break-even point is an estimate, not a promise. AccountingCoach is direct about this: calculating a future break-even point requires predicting future revenues, future expenses, future sales mix, and future operating conditions, and because those amounts are uncertain, the calculated break-even point will be an approximate amount. Treat the figure as the center of a range, not as a precise line. If your costs could be 10 percent higher than entered, run the calculation at the higher costs too, and plan around the worse figure.

      Common mistakes

      Mixing up margin and markup. A 50 percent markup on cost is a 33.33 percent margin on revenue, not a 50 percent margin, because the two divide by different numbers. Using a markup figure where the break-even formula needs a contribution margin ratio gives a break-even point that is far too low. Keep the two apart, and check each figure before it goes into the break-even calculation.

      Forgetting to round up. An exact break-even point of 555.56 units means 556 units must be sold, not 555 and not 555.56. Rounding down, or rounding to the nearest whole number, leaves the business short: at 555 units the fixed costs are not covered. The same applies to the target-profit figure. Always round up when the question is how many units you must sell.

      Mixing periods. Monthly fixed costs with yearly sales, or a yearly target profit with monthly variable costs, gives a nonsense answer that looks precise. Every figure on the page must cover the same period. If your rent is monthly and your target profit is yearly, convert one of them before entering the numbers.

      Counting fixed costs as variable, or the reverse. Rent does not rise when you sell one more unit, so it is fixed. Materials do, so they are variable. Putting rent into the variable cost per unit shrinks the contribution margin, which pushes the break-even point far too high. Putting materials into fixed costs does the opposite. Sort every cost by asking one question: does this cost change if I sell one more unit?

      Ignoring mixed costs. A phone bill with a fixed line rental and a per-minute charge, or a salesperson on salary plus commission, is part fixed and part variable. Putting the whole amount in one box misstates both figures. Split mixed costs into their fixed and variable parts, as AccountingCoach recommends, and enter each part where it belongs.

      Treating the break-even point as the goal. Breaking even means making nothing. A business that aims at break-even has aimed at standing still, with no profit for the owner, no buffer for a bad month, and no money to grow. Use the target profit field to set a real goal, and treat the break-even point as the floor below which the business must never fall.

      Using one product's numbers for the whole business. A business selling five products has five contribution margins. Running the calculator once, on the best-selling product, and treating the answer as the business break-even point ignores the other four. Run each product separately, compare the ratios, and work out the combined position from total sales and total variable costs.

      Forgetting the costs that are not in the boxes. The calculator works only on the figures you enter. Taxes, loan interest, owner drawings, and one-off costs do not appear unless you put them in. If your fixed costs leave out a major bill, the break-even point comes out too low. Check the fixed-costs total against your actual spending before trusting the answer.

      Frequently asked questions

      How do you calculate the break-even point?

      Divide your total fixed costs by your contribution margin per unit, which is the selling price per unit minus the variable cost per unit. For fixed costs of $10,000, a price of $50, and a variable cost of $30, the contribution margin is $20, and the break-even point is $10,000 divided by $20, which is 500 units. To get the break-even point in revenue instead, divide the fixed costs by the contribution margin ratio, which is the contribution margin per unit divided by the price: $10,000 divided by 40 percent is $25,000.

      What is the contribution margin, and why does it decide the break-even point?

      The contribution margin is what each sale leaves after paying its own variable cost: the selling price per unit minus the variable cost per unit. It decides the break-even point because it is the amount each unit contributes toward fixed costs: with a $20 contribution margin and $10,000 of fixed costs, you need 500 units to cover the fixed costs, because 500 times $20 is $10,000. A bigger contribution margin means fewer units to break even, and a smaller one means more. It is not profit: profit only starts once the fixed costs are fully covered.

      Why does the calculator round the break-even point up to whole units?

      Because you cannot sell part of a unit. When the exact break-even point is 555.56 units, selling 555 units leaves the fixed costs $18 short, so you must sell 556 units to break even. The calculator shows the exact figure of 555.56 units next to the whole-unit figure of 556, and works out the break-even revenue from the whole units, 556 times $50 is $27,800, so the printed equation balances. The exact textbook revenue of $27,777.78 is shown too, with the $22.22 gap named.

      What is the margin of safety?

      The margin of safety is how far your sales sit above the break-even point, and therefore how far they can fall before the business starts losing money. It is current sales minus break-even sales, shown in units, in revenue, and as a percentage of current sales. At 600 units against a break-even point of 500, the margin of safety is 100 units, $5,000 of revenue, and 16.67 percent, which means sales could fall by about a sixth before the business made a loss. A negative margin of safety means you are below break-even, and its size says how far short you are.

      What if my selling price is below my variable cost?

      Then the business never breaks even at that price, and the calculator says so instead of inventing a break-even point. Each sale loses money after variable costs, so selling more only deepens the loss: at a price of $20 and a variable cost of $25, every unit sold loses $5, and no volume of sales can cover the fixed costs. The only fixes are to raise the price above the variable cost, cut the variable cost below the price, or do both. If the price exactly equals the variable cost, each sale adds nothing toward fixed costs, and the answer is the same: the business never breaks even.

      How do you work out the sales needed for a target profit?

      Add the target profit to the fixed costs, then divide by the contribution margin per unit. For fixed costs of $3,000, a target profit of $1,500, and a contribution margin of $30, the units needed are $3,000 plus $1,500, which is $4,500, divided by $30, which is 150 units. The revenue at that volume is 150 units times the selling price. The target profit is treated as another fixed amount to cover, which is why it is added to the fixed costs. Enter a target profit above and the calculator shows the units, the revenue, and a check that the profit at that volume meets the target.

      What is the difference between the break-even point and the payback period?

      The break-even point is a sales level: how much you must sell in a period for revenue to cover all costs in that period, so profit is zero. The payback period is a length of time: how long it takes for an investment to return its initial cost in cash. A bakery machine costing $7,200 that brings in $4,000 a year pays back in 1.8 years, which is a payback question, while the bakery's monthly sales level for zero profit is a break-even question. Use break-even analysis for running the business and payback for spending decisions, and check both before committing money, because a short payback does not mean the business is profitable.

      Can a business break even with zero fixed costs?

      Yes. With no fixed costs to cover, the break-even point is zero units, because there is nothing for sales to pay off before profit starts. Every unit sold adds its whole contribution margin straight to profit: with a $20 contribution margin, selling 100 units gives a profit of $2,000. The calculator handles this case directly, and the margin of safety at any positive volume is 100 percent, because all of the sales sit above a break-even point of zero. True zero fixed costs are rare, so check the fixed-costs total carefully before entering zero.

      Sources

      • Investopedia, Break-Even Analysis: What It Is, How It Works, and Formula — the break-even point formula; contribution margin as price minus variable cost; break-even in dollars as fixed costs divided by the contribution margin ratio; the five components of a break-even analysis; the $20,000 fixed cost, $40 contribution margin, 500-unit worked example; and the limitations of the analysis. Accessed 20 November 2026.
      • Investopedia, Cost-Volume-Profit Analysis (CVP): Definition and Formula Explained — the target-profit adjustment to the break-even formula, adding the desired profit to fixed costs before dividing by the contribution margin; the $100,000 fixed cost at a 40 percent contribution margin ratio giving $250,000 of break-even revenue, and $375,000 with a $50,000 target profit. Accessed 20 November 2026.
      • AccountingCoach, Break-even Point: In-Depth Explanation with Examples — the Oil Change Co. worked example: $50 price, $20 variable cost, $30 contribution margin, $3,000 weekly fixed costs, 100 cars per week to break even, $5,000 weekly break-even sales, and 150 cars for a $1,500 weekly profit; mixed expenses and how to split them; and the warning that a break-even point is an estimate and that the formula is overly simplistic for a company with a wide variety of products. Accessed 20 November 2026.
      • AccountingCoach, What is the difference between break-even point and payback period? — the break-even point as the sales level for zero net income on the accrual method, against the payback period as the time for net cash inflows to add up to the initial cash investment. Accessed 20 November 2026.
      • Lumen Learning, 16.4: The Break-Even Point — the Video Productions worked example: $20 price, $12 variable cost, $8 contribution margin, $40,000 fixed costs, 5,000 units and $100,000 of sales to break even; the lemonade stand contribution margin of $2.75 per glass; the seminar break-even point of 26.3 students rounded up to 27; the margin of safety as current sales minus break-even sales, $20,000 on $120,000 of sales, a rate of 16.67 percent; and the Wonderfood multi-product example. Accessed 20 November 2026.
      • Harvard Business School Online, How to Determine Profitability and Strategic Decisions — the payback period formula, the last period with a negative cumulative cash flow plus the absolute value of that total divided by the following period's cash inflow; the bakery machine example, $7,200 cost with $4,000 yearly inflows; and the warning that the basic payback calculation does not account for the time value of money. Accessed 20 November 2026.