DOTS Score Calculator
Your DOTS score
How the numbers were worked out
Keep building the picture: our TDEE Calculator works out how many calories your training burns, our Macro Calculator splits those calories into protein, carbs, and fat, our Body Fat Calculator estimates body fat from measurements, our Creatine Dosage Calculator works out a loading and maintenance dose from your bodyweight, and our BMR Calculator estimates your resting burn.
Last reviewed: 21 November 2026. Reviewed every 180 days; next review due 19 May 2027.
How to use the DOTS Score Calculator
A 120 kg lifter will almost always total more than a 60 kg lifter, so a raw total cannot settle who is stronger for their size. DOTS answers that question with one number: it scales your squat, bench press, and deadlift total by a coefficient that depends only on your sex and bodyweight, so lifters of different sizes can be compared on the same scale. This calculator gives you all three scores powerlifters actually quote, DOTS, the original Wilks, and Wilks 2020, from the same inputs, then places your DOTS score against real meet results and applies the masters age adjustment if you are 40 or older.
To get your scores, follow these steps:
- Choose Men or Women. All three formulas use different coefficients for men and women, because strength scales with bodyweight differently for each sex. A woman and a man with the same bodyweight and the same total get different scores, and that is the point: each is measured against lifters of their own sex.
- Choose kilograms or pounds. The formulas work in kilograms. If you enter pounds, the tool converts both numbers at 1 kg = 2.2046226218 lb and shows the conversion in the working, so you can check it. A bodyweight of 220 lb becomes 99.79 kg, and a total of 1,200 lb becomes 544.31 kg.
- Enter your bodyweight. Your bodyweight on the day you lifted, between 30 and 300 kg. The formulas were built for a narrower range than that, roughly 40 to 210 kg for men and 40 to 150 kg for women for DOTS, and outside the range each formula uses its nearest limit and says so plainly. Use your weigh-in weight, not a rounded guess: a few kilograms either way moves the coefficient enough to change the score by several points.
- Enter your total. Squat plus bench press plus deadlift, between 0 and 2,000 kg. Use your best successful attempts, the numbers that would count at a meet, not gym lifts with different depth or pause standards. A total of 0 is accepted and gives scores of 0.00, which is the honest answer for a lifter who has not totaled yet.
- Enter your age, if you want the masters adjustment. Age is optional and whole years only, 14 to 90. It is used for one thing only: the McCulloch masters factor, which multiplies your DOTS score from age 40 upward. Under 40 the factor is 1.000 and the adjusted score equals your DOTS score. Leave it blank and the tool skips the adjustment.
The tool updates as you type, so you can try different numbers quickly. Try the example buttons under the form: a man at 83 kg with a 580 kg total scores 391.55 DOTS; a woman at 63 kg with a 350 kg total scores 376.43; a 52-year-old man at 90 kg with a 600 kg total scores 387.96 with a masters-adjusted score of 451.97; and a man entering 220 lb and 1,200 lb scores 335.34. Read the full result, not just the headline. The cards show your Wilks and Wilks 2020 scores, your percentile among raw competitors, your masters-adjusted score, your DOTS coefficient, and how far you sit from the median. The guidance explains the result in plain language, the warnings flag bodyweights outside the formulas' ranges and scores above the 99th percentile, and the steps print the full working so you can check every figure against the published formulas.
How it works
Each of the three formulas does the same thing in the same shape: it divides your total by a polynomial in your bodyweight and scales the result. The polynomial is the expected total for a lifter of your bodyweight and sex, fitted to real competition results. Dividing your total by that expected total and scaling it gives a score that means the same thing at any bodyweight. The three formulas differ in the polynomial, the scale, and the data they were fitted to, which is why the same lifts give three different numbers.
The tool works in four steps. First it converts pounds to kilograms if needed, rounding to two decimals. Then it works out the coefficient for each formula at your bodyweight, clamping your bodyweight to the formula's defined range if it falls outside it. Then it multiplies your total by each coefficient. Finally it places your DOTS score on the percentile table and applies the McCulloch factor if your age calls for it. Every step is printed on the page, with the coefficient to six decimals and the multiplication written out, so you can check the arithmetic with a pocket calculator.
Worked example 1: a man at 83 kg with a 580 kg total
This is the example OpenPowerlifting itself lists: a raw lifter with exactly these numbers is recorded at 391.55 DOTS, and this calculator reproduces that figure exactly.
- DOTS coefficient at 83 kg (men): 0.675087. DOTS score: 580 x 0.675087 = 391.55.
- Wilks coefficient at 83 kg (men): 0.667499. Wilks score: 580 x 0.667499 = 387.15.
- Wilks 2020 coefficient at 83 kg (men): 0.801643. Wilks 2020 score: 580 x 0.801643 = 464.95.
- Percentile: 391.55 sits between the 50th percentile mark of 352 and the 75th percentile mark of 394 for men, about the 74th percentile.
- Against the median: 391.55 is 39.55 above the median of 352 for men.
The same 580 kg total at 93 kg bodyweight scores 369.03 DOTS, about 22.52 points less. That gap is the whole point of the formula: the extra 10 kg of bodyweight has to come with a bigger total to hold the same score. At 83 kg, a total of 592.52 kg is needed for 400 DOTS, and 740.65 kg for 500.
Worked example 2: a woman at 63 kg with a 350 kg total
- DOTS coefficient at 63 kg (women): 1.075515. DOTS score: 350 x 1.075515 = 376.43.
- Wilks coefficient at 63 kg (women): 1.073957. Wilks score: 350 x 1.073957 = 375.88.
- Wilks 2020 coefficient at 63 kg (women): 1.278622. Wilks 2020 score: 350 x 1.278622 = 447.52.
- Percentile: 376.43 sits between the 75th percentile mark of 353 and the 90th percentile mark of 398 for women, about the 83rd percentile.
- Against the median: 376.43 is 70.43 above the median of 306 for women.
Notice how close the DOTS and Wilks scores are here, 376.43 against 375.88, while Wilks 2020 reads 447.52. That gap is the 600-point scale, not a real difference in the lifting. Never compare a Wilks 2020 score with a DOTS or Wilks score directly.
Worked example 3: a 52-year-old man at 90 kg with a 600 kg total
- DOTS coefficient at 90 kg (men): 0.646601. DOTS score: 600 x 0.646601 = 387.96.
- Wilks coefficient at 90 kg (men): 0.638394. Wilks score: 600 x 0.638394 = 383.04.
- Wilks 2020 coefficient at 90 kg (men): 0.766996. Wilks 2020 score: 600 x 0.766996 = 460.20.
- Percentile: 387.96 sits between the 50th percentile mark of 352 and the 75th percentile mark of 394 for men, about the 71st percentile.
- Masters adjustment: at age 52 the McCulloch factor is 1.165, so 387.96 x 1.165 = 451.97.
The DOTS polynomial at 90 kg for men evaluates to 773.27, giving a coefficient of 0.646601. The Wilks polynomial at the same bodyweight is 783.22, giving a coefficient of 0.638394, and the Wilks 2020 polynomial is 782.27, giving 0.766996. The polynomial values here are rounded to two decimals; the coefficients are worked out from the full-precision polynomial and rounded to six decimals, which is why dividing 500 by the printed 773.27 gives 0.646603 rather than 0.646601. All three polynomials are printed in full in the sections below, with every coefficient, so you can work these numbers out yourself.
Worked example 4: pounds in, kilograms out
A man enters 220 lb bodyweight and a 1,200 lb total, age 45.
- Converted to kilograms: 220 / 2.2046226218 = 99.79 kg bodyweight, and 1,200 / 2.2046226218 = 544.31 kg total.
- DOTS score: 544.31 x 0.616077 = 335.34. Wilks score: 544.31 x 0.609102 = 331.54. Wilks 2020 score: 544.31 x 0.730035 = 397.37.
- Percentile: 335.34 sits between the 25th percentile mark of 308 and the 50th percentile mark of 352 for men, about the 41st percentile.
- Masters adjustment: at age 45 the McCulloch factor is 1.055, so 335.34 x 1.055 = 353.78.
The DOTS formula
DOTS stands for Dynamic Objective Team Scoring. Tim Konertz of the German powerlifting federation, the BVDK, created it in 2019, after the IPF moved away from Wilks to a points system that could not compare men and women, which the BVDK's team events needed. The BVDK used DOTS for team events from 2020 and decided at the end of 2019 to use it for individual meets too. Swiss Powerlifting chose it for 2020, other federations followed, and OpenPowerlifting adopted it as its default ranking formula. That adoption is what made DOTS the standard most lifters quote today, even though the IPF itself scores with its own IPF GL points, in force since 1 May 2020.
DOTS is a fourth-degree polynomial in bodyweight, scaled to 500. With bodyweight x in kilograms and total T in kilograms, the score is T x 500 / P(x), where P(x) = a + b x + c x squared + d x cubed + e x to the fourth. The five constants differ for men and women:
| Constant | Men | Women |
|---|---|---|
| a | -307.75076 | -57.96288 |
| b | 24.0900756 | 13.6175032 |
| c | -0.1918759221 | -0.1126655495 |
| d | 0.0007391293 | 0.0005158568 |
| e | -0.000001093 | -0.0000010706 |
| Bodyweight range | 40 to 210 kg | 40 to 150 kg |
These are the constants as printed in the OpenPowerlifting reference code and in Appendix 1 of the IPF's 2020 evaluation of scoring formulas (Kopayev, Onyshchenko, and Stetsenko, March 2020), re-checked against seven independent implementations on 21 November 2026, all agreeing to the last digit. DOTS was fitted on data from drug-tested raw lifters, which is why it behaves well across the whole range of competitive bodyweights where Wilks was criticized for favoring very heavy male lifters. In the IPF's 2020 evaluation of five formulas on world and European championship results, the IPF's own GL formula ranked first and DOTS second on the study's statistical tests.
The coefficient falls as bodyweight rises, which is the whole mechanism: a heavier lifter needs a bigger total for the same score. The table below shows the DOTS coefficient, the number your total is multiplied by, at common bodyweights. Multiply your total by the coefficient for your bodyweight to get your score.
| Bodyweight | Men | Women |
|---|---|---|
| 50 kg | 0.994781 | 1.253010 |
| 60 kg | 0.844043 | 1.108546 |
| 70 kg | 0.751156 | 1.011255 |
| 80 kg | 0.689546 | 0.942250 |
| 90 kg | 0.646601 | 0.891521 |
| 100 kg | 0.615516 | 0.853346 |
| 120 kg | 0.574306 | 0.802369 |
| 150 kg | 0.537760 | 0.770757 |
| 200 kg | 0.500269 | Held at 150 kg |
| 210 kg | 0.495621 | Held at 150 kg |
Outside the defined range, this calculator uses the nearest limit, as the OpenPowerlifting reference code does: a man at 220 kg is scored as if he weighed 210 kg, and a woman at 35 kg is scored as if she weighed 40 kg. The result names the limit it used, so you are never scored on a bodyweight you did not enter without being told.
The Wilks formula
The Wilks coefficient is the oldest of the three, created by Robert Wilks, the chief executive of Powerlifting Australia. It was the IPF's formula for best-lifter awards until the end of 2018. It is a fifth-degree polynomial, scaled to 500: the score is T x 500 / P(x), where P(x) = a + b x + c x squared + d x cubed + e x to the fourth + f x to the fifth. The six constants, as printed on the Wilks coefficient page and re-opened on 21 November 2026:
| Constant | Men | Women |
|---|---|---|
| a | -216.0475144 | 594.31747775582 |
| b | 16.2606339 | -27.23842536447 |
| c | -0.002388645 | 0.82112226871 |
| d | -0.00113732 | -0.00930733913 |
| e | 0.00000701863 | 0.00004731582 |
| f | -0.00000001291 | -0.00000009054 |
| Bodyweight range | 40 to 201.9 kg | 26.51 to 154.53 kg |
Wilks was fitted on the men's and women's world record holders and the top two performers for each lift at the IPF's 1996 and 1997 World Championships. A validation study by Vanderburgh and Batterham, published in Medicine and Science in Sports and Exercise in 1999, found no bias for the men's or women's bench press and total, a favorable bias toward intermediate weight class lifters in the women's squat, and a linear unfavorable bias toward heavier men and women in the deadlift. The classic illustration of what Wilks does comes from its own documentation: a man weighing 320 lb with a 1,400 lb total scores 353.00 Wilks, while a man weighing 200 lb with a 1,000 lb total scores 288.41. The lighter lifter is stronger for his bodyweight, five times bodyweight against 4.375 times, but the heavier lifter wins on Wilks, because the formula rewards absolute strength as well as relative strength.
The Wilks 2020 formula
Wilks 2020 is Robert Wilks's own update, released by Powerlifting Australia in February 2020 and described as a rebalancing of the coefficients, with men's and women's performances better aligned and the extreme bodyweight classes brought into better balance with the middle classes. It keeps the fifth-degree shape and changes two things: new coefficients, fitted to newer results, and a numerator of 600 instead of 500, so Wilks 2020 scores read roughly 15 to 20 percent higher than original Wilks for the same lift. The constants, as printed on the Wilks coefficient page and re-opened on 21 November 2026, with full precision cross-checked against the OpenPowerlifting reference code:
| Constant | Men | Women |
|---|---|---|
| a | 47.4617885411949 | -125.425539779509 |
| b | 8.47206137941125 | 13.7121941940668 |
| c | 0.073694103462609 | -0.0330725063103405 |
| d | -0.00139583381094385 | -0.0010504000506583 |
| e | 0.00000707665973070743 | 0.00000938773881462799 |
| f | -0.0000000120804336482315 | -0.000000023334613884954 |
| Bodyweight range | 40 to 200.95 kg | 40 to 150.95 kg |
Two cautions belong with Wilks 2020. First, the OpenPowerlifting code notes that Wilks did not publish how the coefficients are derived, and that they have been updated before, so a Wilks 2020 number is tied to the version used here. Second, one calculator site publishes a different set of women's Wilks 2020 constants, with d, e, and f of the opposite sign and different size; that set matches no other source, and the set in the table above, which agrees across the Wilks coefficient page, the OpenPowerlifting reference code, and four independent implementations, is the one this calculator uses. At 90 kg, a man totaling 500 kg scores 383.50 Wilks 2020 and the same lifter at a 600 kg total scores 460.20. At 100 kg, a 700 kg total scores 510.55. A woman at 60 kg with a 400 kg total scores 527.61.
Reading your percentile
A DOTS score on its own is hard to judge, so this calculator places yours against real meet results. The percentile table comes from the OpenPowerlifting public dataset, revision 4a1c65a7, snapshot 31 October 2026: full-power entries in sanctioned meets, raw or single-ply, with each lifter counted once at their best DOTS. The pool is 285,476 men and 133,267 women. Your percentile is worked out by linear interpolation between the marks in the table, on your rounded DOTS score, so the percentile on the page always matches the score on the page.
| Percentile | Raw men | Raw women |
|---|---|---|
| 25th | 308 | 261 |
| 50th (median) | 352 | 306 |
| 75th | 394 | 353 |
| 90th | 432 | 398 |
| 95th | 456 | 427 |
| 99th | 500 | 484 |
Read the table with its limits in mind. These are competitors, not the general public: someone who entered a meet and had the result recorded is already a serious lifter, so a score near the median here is a respectable total, not an average one. The pool mixes federations, rulebooks, and lifting standards, and all ages are included. Below the 25th mark, the percentile is estimated by extending the line between the 25th and 50th marks, floored at the 1st percentile, and it is labeled an estimate in the working. Above the 99th mark, the percentile is reported as 99 and the tool asks you to double-check your numbers, because a score above 500 for men or 484 for women is rarer than a typo.
The median is the number most lifters should anchor on: 352 DOTS for men and 306 for women. Half of the raw men who have competed scored below 352, and half above. A man at 83 kg needs a total of 521.41 kg to score exactly 352.00, and a woman at 63 kg needs a total of about 284.51 kg to reach 306. Those are solid totals, and they are the middle of the competitive field, not the bottom of it.
The masters adjustment
DOTS, Wilks, and Wilks 2020 take no account of age: a 60-year-old is scored the same way as a 25-year-old. Masters powerlifting handles that with the McCulloch coefficients, a table of multipliers that grows with age from 40 upward. This calculator multiplies your DOTS score by the McCulloch factor for your age, so a 60-year-old's score is put on the same footing as an open lifter's. The table is the USA Powerlifting age coefficients table, and its decade points were re-verified against live sources on 21 November 2026:
| Age | McCulloch factor | Age | McCulloch factor |
|---|---|---|---|
| 40 | 1.000 | 65 | 1.480 |
| 45 | 1.055 | 70 | 1.645 |
| 50 | 1.130 | 75 | 1.835 |
| 55 | 1.225 | 80 | 2.050 |
| 60 | 1.340 | 85 | 2.287 |
| 62 | 1.393 | 90 | 2.549 |
The full table runs year by year from 40 to 90, and the calculator uses the exact value for your age, not an interpolation: 1.010 at 41, 1.147 at 51, 1.366 at 61, 1.543 at 67, 1.610 at 69, 2.096 at 81. At 40 the factor is exactly 1.000, so a 40-year-old's adjusted score equals their DOTS score, and the adjustment only starts to bite from 41. Two other sources disagree with the table at single points, and both are wrong against it: one calculator page says 1.01 at 40, where the table says 1.000, and another says a 60-year-old gets 1.23, where the table says 1.340. The 1.23 figure is the Foster coefficient for a 14-year-old, from the junior table, and it does not belong in the masters column at all.
That junior table, the Foster coefficients, is the other half of the age system: 1.23 at 14, 1.18 at 15, 1.13 at 16, 1.08 at 17, 1.06 at 18, 1.04 at 19, 1.03 at 20, 1.02 at 21, 1.01 at 22, and 1.00 at 23. This calculator does not apply the Foster table. Its scope is the masters adjustment, and lifters under 40 get a factor of 1.000 with a note saying so. If you are coaching a junior, the Foster table is the one to use, and the same multiplication applies.
One honesty note: nobody has published how the McCulloch coefficients were derived, and lifters argue about whether they are generous. A 69-year-old gets 1.610, which turns a 300 DOTS score into 483.00, and some masters lifters feel that flatters them. The table is what federations use for masters best-lifter awards, so this calculator uses it as published, but an adjusted score is a comparison device, not a claim about what you would lift at 25. Federations also apply the factor differently: some multiply the total, some multiply the Wilks score, and this calculator multiplies the DOTS score. Check your meet's rules before quoting an adjusted score.
DOTS vs Wilks vs Wilks 2020
For the same lifter, the three formulas give three numbers on two scales. A man at 83 kg with a 600 kg total scores 405.05 DOTS, 400.50 Wilks, and 480.99 Wilks 2020. DOTS and Wilks sit close together because both use a 500-point scale and both were fitted to similar ideas of the expected total. Wilks 2020 sits about 20 percent higher because of its 600 numerator. The table below shows how the three compare for a few lifters.
| Lifter | DOTS | Wilks | Wilks 2020 |
|---|---|---|---|
| Man, 83 kg, 580 kg | 391.55 | 387.15 | 464.95 |
| Man, 90 kg, 600 kg | 387.96 | 383.04 | 460.20 |
| Man, 100 kg, 700 kg | 430.86 | 426.01 | 510.55 |
| Woman, 63 kg, 350 kg | 376.43 | 375.88 | 447.52 |
| Woman, 60 kg, 400 kg | 443.42 | 445.95 | 527.61 |
Which formula should you use? The one your meet uses for best lifter. DOTS is the default on OpenPowerlifting and the formula of the BVDK and many other federations. The IPF uses IPF GL points, a different exponential formula this calculator does not cover, because it needs separate constants for classic and equipped lifting and for full power and bench press only. Wilks survives in federations that never moved, and Wilks 2020 is quoted by lifters who want the updated balance. The formulas agree closely enough that the choice matters less than consistency: compare a score only with scores from the same formula, and say which formula you used when you quote a number.
What is a good DOTS score?
Judge by the percentile table, not by round numbers. A man at 352 or a woman at 306 is at the median of raw competitors, which is a solid club-level total. At the 75th percentile, 394 for men and 353 for women, you are beating three quarters of the people who have ever entered a meet. At the 90th percentile, 432 for men and 398 for women, you are competitive at national level in most federations. At 500 for men or 484 for women, the 99th percentile, you are among the best raw lifters ever recorded. A score of 300 for a man sits around the 20th percentile, and a score of 300 for a woman sits around the 47th percentile, which shows why the two sexes need different scales: the same number means something different for each.
For a man at 83 kg, the totals behind those marks are 444.39 kg for 300 DOTS, 518.45 kg for 350, 592.52 kg for 400, 666.58 kg for 450, and 740.65 kg for 500. For a woman at 63 kg, 400 DOTS needs a total of about 371.91 kg. Those totals are the honest way to set a target: pick the score you want, read off the total it needs at your bodyweight, and train toward the total, not the score. Gaining weight lowers your coefficient, so it only pays off if it brings a bigger total. Losing weight raises it, but only if you keep your strength. The formula cannot tell you which is realistic for you.
Features
All three formulas from one set of inputs. DOTS, the original Wilks, and Wilks 2020 are computed together from the same bodyweight and total, so you can see all three scores side by side instead of running three calculators. The coefficient for each formula is shown to six decimals, and the multiplication is printed in full.
A percentile from real meet results. Your DOTS score is placed on the percentile table from the OpenPowerlifting dataset, 285,476 men and 133,267 women, so you know where you stand among people who have actually competed. The median for your sex is shown next to your score, with the gap in points.
Masters adjustment with the full McCulloch table. Enter your age and the tool applies the exact McCulloch factor for that year, from 1.000 at 40 to 2.549 at 90, and shows the multiplication. Under 40 it says plainly that no adjustment applies.
Kilograms or pounds. Enter either unit. Pounds are converted at 1 kg = 2.2046226218 lb and the conversion is printed in the working, so a pound-based lifter can check the kilogram figures the formulas actually used.
Honest clamping. Each formula is only defined for a range of bodyweights, and the ranges differ. The tool clamps each formula to its own range, names the limit it used, warns you, and adds a note, instead of silently scoring you on a bodyweight you did not enter.
Full working, checkable by hand. Every number on the page can be verified with the coefficient tables printed above and a pocket calculator. The worked examples in this guide use the same numbers the tool produces, and the tool's own steps print the same arithmetic for your inputs.
Use cases
Comparing lifters across weight classes. A gym argument about who is stronger, the 74 kg lifter with a 500 kg total or the 105 kg lifter with a 620 kg total, is exactly what DOTS is for. The 74 kg lifter scores 361.83 DOTS and the 105 kg lifter 373.92, so the heavier lifter wins by about 12 points, far less than the 120 kg gap in totals suggests. Run both through the calculator and the argument is settled in seconds.
Tracking your own progress. A total that rises while your bodyweight rises may not be progress at all. If your total goes from 550 kg to 580 kg while your bodyweight goes from 83 kg to 93 kg, your DOTS score goes from 371.30 to 369.03: you got stronger in absolute terms and weaker for your size. The score strips out the bodyweight change and shows the real trend.
Setting a target total. Pick the score you want and work backward. A man at 83 kg who wants 400 DOTS needs a total of 592.52 kg. A woman at 63 kg who wants 400 DOTS needs about 371.91 kg. Those targets turn a vague goal into a training plan: the total is the sum of three lifts, so a 592.52 kg target splits into, say, a 210 kg squat, a 140 kg bench press, and a 242.52 kg deadlift, and each lift gets its own program.
Masters lifters comparing with their younger selves. A 60-year-old who totaled 500 kg at 100 kg bodyweight scores 307.76 DOTS, and the McCulloch factor of 1.340 lifts that to 412.40, which is the score a 25-year-old would need to match the achievement. That comparison is what masters best-lifter awards are built on.
Coaches checking a lifter's class. A coach deciding whether a lifter should move up a weight class can run the same total at both bodyweights and see what the move costs. The same 580 kg total scores 391.55 at 83 kg and 369.03 at 93 kg, so the move up costs about 22.52 points unless the total grows with it. That number frames the decision honestly: the lifter needs a total of 615.40 kg at 93 kg to hold 391.55, roughly 35 kg more than at 83 kg.
Planning nutrition around a strength goal. A DOTS target implies a bodyweight and a total, and both imply food. Our TDEE Calculator works out how many calories your training burns, our Macro Calculator splits those calories into protein, carbs, and fat, and our Protein Powder Cost Per Serving Calculator prices the protein that fills the gap. Our Creatine Dosage Calculator works out a loading and maintenance dose from your bodyweight, our BMR Calculator estimates your resting burn, our Body Fat Calculator estimates body fat from measurements, and our Caffeine Cutoff Calculator tells you when to stop drinking coffee so it does not cost you sleep before a heavy session. For the bigger picture, our BMI Calculator and Ideal Weight Calculator put your bodyweight in context.
Sources
Every figure on this page was re-verified from its publisher on 21 November 2026. The DOTS constants are as printed in the OpenPowerlifting reference code and in Appendix 1 of the IPF's 2020 formula evaluation (Kopayev, Onyshchenko, and Stetsenko, March 2020), cross-checked against seven independent implementations, all agreeing. The Wilks and Wilks 2020 constants are as printed on the Wilks coefficient page, with Wilks 2020 full precision cross-checked against the OpenPowerlifting reference code as quoted by two independent implementations. The percentile table is an analysis of the OpenPowerlifting public dataset, revision 4a1c65a7, snapshot 31 October 2026, as published on the DOTS calculator percentile table. The McCulloch masters table is the USA Powerlifting age coefficients table; its decade points were re-verified live against the strength standards McCulloch summary and the powerlifting calculator methodology, and ages 67 and 69 were corroborated by lifter reports in the StrongFirst McCulloch discussion. Worked examples were cross-checked against the published examples on the DOTS calculation methodology page and the Coachway DOTS calculator, and against the Wilks examples on the Wilks coefficient page. Where sources disagreed, the governing source is named in the text: the USAPL table governs the McCulloch values, and the OpenPowerlifting reference code governs the coefficients.
Frequently asked questions
What is a good DOTS score?
Judge by the percentile table, not by round numbers. Among raw lifters in the OpenPowerlifting data, the median best DOTS is 352 for men and 306 for women. The 75th percentile is 394 for men and 353 for women, the 90th is 432 for men and 398 for women, and the 99th is 500 for men and 484 for women. These are people who entered meets, so a score near the median is already a solid total, and a score above the 90th percentile is competitive at national level in most federations.
What does DOTS stand for?
Dynamic Objective Team Scoring, according to its author, Tim Konertz of the German powerlifting federation, the BVDK. He says the abbreviation was chosen before the words were worked out. Some pages say DOTS stands for Dots Over Total Score, which is not his description. Konertz created the formula in 2019, and the BVDK has used it for team and individual scoring since 2020.
What is the difference between DOTS and Wilks?
DOTS is a fourth-degree polynomial fitted to modern data from drug-tested raw lifters, and Wilks is a fifth-degree polynomial fitted to world championship results from 1996 and 1997. DOTS was built to correct the bias critics found in Wilks, which favored very heavy male lifters. Both use a 500-point scale, so their numbers sit close together: a man at 83 kg with a 600 kg total scores 405.05 DOTS and 400.50 Wilks. DOTS is the default on OpenPowerlifting and the formula of the BVDK and many other federations, while the IPF uses its own IPF GL points.
What is Wilks 2020, and why is it higher?
Wilks 2020 is Robert Wilks's own update, released by Powerlifting Australia in February 2020. It keeps the fifth-degree shape of the original Wilks formula but uses new coefficients fitted to newer results and a numerator of 600 instead of 500, so it reads roughly 20 percent higher for the same lift: a man at 90 kg with a 600 kg total scores 460.20 Wilks 2020 against 383.04 original Wilks. The two scores are not interchangeable, so compare a Wilks 2020 score only with other Wilks 2020 scores.
How does the masters adjustment work?
The McCulloch masters factor multiplies your DOTS score from age 40 upward: 1.000 at 40, 1.055 at 45, 1.130 at 50, 1.340 at 60, 1.645 at 70, 2.050 at 80, and 2.549 at 90, with a year-by-year table between those points. A 52-year-old man with a DOTS score of 387.96 gets 387.96 x 1.165 = 451.97. Under 40 the factor is 1.000 and no adjustment applies. The junior Foster table exists for lifters under 23, but this calculator applies the masters table only. Federations apply the factor to totals or Wilks scores in different ways, so check your meet's rules before quoting an adjusted score.
Where do the percentiles come from?
From the OpenPowerlifting public dataset, revision 4a1c65a7, snapshot 31 October 2026. The table counts full-power entries in sanctioned meets for men and women, raw or single-ply, with one best DOTS per lifter: 285,476 men and 133,267 women. Your percentile is worked out by linear interpolation between the marks in the table. These are meet entrants, not the general public, and the pool mixes federations and ages, so read your percentile as a place among competitors.
Why did the tool say my bodyweight was clamped?
Each formula is only defined for a range of bodyweights. DOTS covers 40 to 210 kg for men and 40 to 150 kg for women, Wilks covers 40 to 201.9 kg for men and 26.51 to 154.53 kg for women, and Wilks 2020 covers 40 to 200.95 kg for men and 40 to 150.95 kg for women. Outside its range, a formula uses the nearest limit, as the OpenPowerlifting reference code does, and the tool names the limit it used. A man at 220 kg is scored as if he weighed 210 kg for DOTS, 201.9 kg for Wilks, and 200.95 kg for Wilks 2020. Treat scores outside the ranges as approximate.
Does DOTS work for equipped lifting or a single lift?
It will calculate both, because the formula only needs sex, bodyweight, and a total. It was built on raw data, though, so read an equipped score with care: an equipped total scores on the same formula but reads high against raw lifters. For a single lift, the score is only comparable with other single-lift scores. The IPF GL formula has separate constants for equipped lifting and for bench press only, which is one reason the IPF uses it instead.