Markup Calculator
Markup is the percent you add to the cost; margin is the percent you keep from the price. They are two different percents for the same profit, and mixing them up is the most expensive pricing mistake a small business can make. Set a price from a markup, find the markup on a price you already charge, or work backwards from a price to the cost it can carry.
Your selling price
Markup and margin, side by side
What other markups would give
Your calculation, step by step
Markup is only half the pricing story. Our Profit Margin Calculator works out the margin on revenue from the same figures, our Percentage Calculator works out any percent in seconds, and our Discount Calculator shows what a sale price does to your markup.
Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.
How to use the Markup Calculator
Markup answers one question: how much did you add to the cost? If you buy something for $100 and sell it for $150, you added $50, which is 50 percent of the cost. That is your markup. The same $50 is only 33.33 percent of the selling price, which is the profit margin, and the difference between those two numbers is the whole subject of this page. This calculator has three modes, one for each question sellers actually ask, and it shows the markup and the margin side by side so you can never confuse them.
Everything runs in your browser. Nothing you enter leaves the page, no price is looked up anywhere, and no account or sign-up is needed. The calculator uses only the numbers you type, so the answer is only as good as the cost you enter: include everything the item cost you to buy or make, and read the gross versus net section below before you treat the result as your final profit.
- Pick a mode. Set a price finds the selling price from a cost and a markup. Find the markup works out the markup and the margin from a cost and a selling price. Find the cost works backwards from a selling price and a markup to the cost that price implies.
- Enter the cost. In set-a-price and find-the-markup modes, enter what the item cost you to buy or make. The cost must be above $0: a markup divides by the cost, so a zero cost gives no markup at all, and the tool says so instead of inventing a number.
- Enter the markup or the selling price. In set-a-price and find-the-cost modes, enter the markup you want, from 0 percent up. A markup of 100 percent doubles the cost; a markup of 0 percent means you sell at cost and break even. In find-the-markup mode, enter the selling price instead, and the tool works out the markup for you.
- Read your result. The calculator shows the headline answer, the profit in dollars, every step of the arithmetic, and a table of what other markups would give on the same figures. In every mode you also get a markup-versus-margin comparison table, which is the fastest way to see why the two percents differ. Results update as you type.
If you only need a quick percent worked out, without a price attached, our Percentage Calculator answers questions like what percent one number is of another, and what a percent increase or decrease comes to. This page is the pricing version: costs and markups in, prices and margins out. And if you think in margin rather than markup, our Profit Margin Calculator is the sibling tool: it works out the margin on revenue from the same figures, with the same step-by-step breakdown.
How markup math works
Every markup calculation uses the same three numbers: the cost, the selling price, and the profit, which is the selling price minus the cost. Know any two and you can find the third. The formulas below are written out in plain words, with a worked example for each mode, so you can check the tool by hand or do the sum on paper before you set a price.
Find the markup. Gross profit equals selling price minus cost. Markup equals gross profit divided by cost, times 100. Profit margin equals gross profit divided by selling price, times 100. The two percents share the same profit on top and divide by different numbers underneath, which is why they are never the same number.
Worked example, find the markup. A coffee shop sells a mug for $15, and the mug cost $6 to buy. The gross profit is $15 minus $6, which is $9. The markup is $9 divided by $6 times 100, which is 150.00 percent. The profit margin is $9 divided by $15 times 100, which is 60.00 percent. The same $9 is 150 percent of the cost and 60 percent of the price.
Worked example, the classic pair. An item costs $100 and sells for $150. The gross profit is $150 minus $100, which is $50. The markup is $50 divided by $100 times 100, which is 50.00 percent. The profit margin is $50 divided by $150 times 100, which is 33.33 percent. Memorize this pair: a 50 percent markup is a 33.33 percent margin, not a 50 percent margin. It is the single most useful markup fact in small business.
Worked example, selling at a loss. An item costs $100 and sells for $90. The gross profit is $90 minus $100, which is minus $10. The markup is minus $10 divided by $100 times 100, which is minus 10.00 percent. The profit margin is minus $10 divided by $90 times 100, which is minus 11.11 percent. A negative markup is not an error: it is the tool telling you the sale loses money, and by exactly how much.
Set a price. Selling price equals cost times 1 plus the markup written as a decimal. For a 150 percent markup, multiply the cost by 2.50. The profit is the selling price minus the cost, and you can check the answer by working the markup forward from the price you just found.
Worked example, set a price. A T-shirt costs $9 to make, and you want a 150 percent markup. The selling price is $9 times 1 plus 1.50, which is $9 times 2.50, which is $22.50. The profit is $22.50 minus $9.00, which is $13.50. The check: $13.50 divided by $9.00 times 100 is 150.00 percent, and the margin is $13.50 divided by $22.50 times 100, which is 60.00 percent. A second example: a widget costs $45 and you want a 33.33 percent markup. The price is $45 times 1.3333, which is $59.9985, which rounds to $60.00, and the profit is $15.00.
Find the cost. Cost equals selling price divided by 1 plus the markup written as a decimal. For a 60 percent markup, divide the price by 1.60. The profit is the selling price minus the cost.
Worked example, find the cost. You sell a product for $80 and want a 60 percent markup. The cost is $80 divided by 1 plus 0.60, which is $80 divided by 1.60, which is $50.00. The profit is $80 minus $50, which is $30.00. If your supplier charges more than $50, the markup falls below 60 percent. A second example: a selling price of $250 at a 25 percent markup gives a cost of $250 divided by 1.25, which is $200.00, and a profit of $50.00.
Rounding. Money is rounded half up to the nearest cent: a value ending in exactly half a cent rounds up, so $100.005 becomes $100.01. Percentages are rounded to two decimal places, and a target markup is shown as you enter it. The price and cost formulas can produce fractions of a cent, and rounding them can move the markup by a hundredth of a point: a cost of $12.50 at a 12.5 percent markup gives an exact price of $14.0625, which rounds to $14.06, and $14.06 gives a markup of 12.48 percent, not 12.50 percent, and a margin of 11.10 percent instead of 11.11 percent. When that happens the tool says so plainly instead of hiding the gap, and the step-by-step breakdown shows the check so you can see it for yourself.
Markup vs margin: the difference that costs sellers money
Markup and margin are the two ways of expressing the same profit as a percent, and they are not interchangeable. Markup divides the profit by the cost: it tells you how much you added to what you spent. Margin divides the profit by the revenue: it tells you what share of the selling price you keep. Because the revenue is bigger than the cost whenever you make a profit, the markup is always the bigger number. A seller who sets prices by markup while thinking in margin will underprice everything, and a seller who quotes a markup to a buyer who hears a margin will promise more than the price delivers.
The table below shows the pair for common markups, with the selling price and profit on a $100 cost, so you can see the relationship at a glance. Read across any row: the markup is the share of the cost, the margin is the share of the price, and the profit is the same dollars either way.
| Markup on cost | Profit margin | Price on a $100 cost | Profit |
|---|---|---|---|
| 10.00% | 9.09% | $110.00 | $10.00 |
| 20.00% | 16.67% | $120.00 | $20.00 |
| 25.00% | 20.00% | $125.00 | $25.00 |
| 33.33%* | 25.00% | $133.33 | $33.33 |
| 50.00% | 33.33% | $150.00 | $50.00 |
| 75.00% | 42.86% | $175.00 | $75.00 |
| 100.00% | 50.00% | $200.00 | $100.00 |
| 150.00% | 60.00% | $250.00 | $150.00 |
| 200.00% | 66.67% | $300.00 | $200.00 |
| 300.00% | 75.00% | $400.00 | $300.00 |
| 400.00% | 80.00% | $500.00 | $400.00 |
* The 33.33 percent row is exactly one third, shown rounded to two decimals. An exact markup of one third gives a price of $133.333... on a $100 cost, which rounds to $133.33, and a margin of exactly 25 percent.
Two rows in that table deserve a second look. The 100 percent markup row shows a 50 percent margin: doubling the cost gives you a 50 percent margin, not a 100 percent margin. Sellers who say they "doubled their money" and call it a 100 percent margin have the markup right and the margin wrong. And the 400 percent markup row shows an 80 percent margin, which looks extreme until you remember that the markup divides by the small number: on a $100 cost, keeping $400 of a $500 price is an 80 percent margin and a 400 percent markup, and both numbers describe the same sale.
To convert between the two without the table, use these formulas. Margin from markup: margin equals markup divided by 100 plus markup, times 100. A 50 percent markup gives 50 divided by 150 times 100, which is a 33.33 percent margin. Markup from margin: markup equals margin divided by 100 minus margin, times 100. A 20 percent margin gives 20 divided by 80 times 100, which is a 25 percent markup. The conversion is not symmetric, which is the whole point: you cannot swap the words and keep the number.
The practical rule is simple. Use markup when you talk about how you built the price from the cost, because markup is measured against the money you spent. Use margin when you talk about what you keep from a sale, because margin is measured against the money the customer actually pays. Accountants, lenders, and investors talk in margin, so a margin is the number to quote in a business plan or a loan application, and our Profit Margin Calculator works it out from the same figures. A supplier who offers you "50 percent off the list price" is talking about a discount, not a markup, and the markup that discount leaves you depends on your cost, not on the discount percent alone.
Keystone pricing and typical markups by industry
Keystone pricing is the oldest shortcut in retail: set the price at double the wholesale cost. Doubling the cost is a 100 percent markup, and it leaves a 50 percent gross margin, which is why the rule has survived for more than a century. It is fast, it is consistent across a whole catalog, and the margin it produces is easy to remember. Shopify's guide to keystone pricing puts it plainly: doubling the wholesale cost gives you a 100 percent markup and a gross margin of about 50 percent, so about half the selling price remains after you subtract what the product cost you.
Shopify's own example makes the arithmetic concrete. If you buy ceramic mugs from a supplier at a wholesale price of $14 each, you double that cost for a keystone retail price of $28 each. The profit is $14.00, the markup is $14 divided by $14 times 100, which is 100.00 percent, and the margin is $14 divided by $28 times 100, which is 50.00 percent. The same guide notes that some higher-end retail categories go above standard keystone: fine jewelry retailers may follow triple keystone pricing, setting prices at roughly three times the wholesale cost. Triple keystone on a $20 cost gives a $60 price, a profit of $40, a markup of 200.00 percent, and a margin of 66.67 percent.
Keystone is a starting point, not a law, and Shopify is clear about its limits. It ignores competitor prices, it ignores what shoppers are willing to pay, and it ignores costs beyond wholesale: it doubles the wholesale cost but does not include shipping, overhead, duties, or fees. A keystone price worked out on the wholesale cost alone can look like a 50 percent margin while the true margin, after the other costs land, is thinner. Count the full cost before you double it, or the shortcut will mislead you.
What markup do other businesses actually use? The ranges below come from Xero's guide to calculating markup, published 23 July 2026, which lists typical markup percentages by industry. They are starting points, not targets: Xero's own words are that these are general ranges, and your ideal markup may fall outside them. The equivalent margins in the right-hand column are our own conversions of Xero's ranges, worked out with the margin formula above, so you can read each range in the language your accountant speaks.
| Industry (Xero) | Typical markup range | Equivalent margin range |
|---|---|---|
| Retail (clothing, accessories) | 50% to 100% | 33.33% to 50.00% |
| Food and beverage (restaurants, cafes) | 60% to 75% | 37.50% to 42.86% |
| Grocery and convenience stores | 5% to 25% | 4.76% to 20.00% |
| Jewelry | 100% to 300% | 50.00% to 75.00% |
| Electronics and technology | 10% to 50% | 9.09% to 33.33% |
| Professional services (consulting, design) | 50% to 150% | 33.33% to 60.00% |
| Construction and trades | 10% to 20% | 9.09% to 16.67% |
Read the spread, not just the numbers. Grocery runs on markups of 5 to 25 percent because it sells a huge volume of goods that customers can price-compare in seconds, while jewelry runs at 100 to 300 percent because the value is in the brand and the stone, not in the metal, and customers buy rarely. The same logic explains why electronics sit at 10 to 50 percent: price transparency online squeezes the markup, and the money is made on volume, accessories, and warranties. Xero adds that most small businesses aim for a markup between 50 percent and 100 percent, and that a business selling a unique, handmade product can often charge a higher markup than one selling a widely available commodity.
Two cautions belong with any benchmark table. First, different publishers disagree sharply: other guides put grocery at 1 to 3 percent and clothing at 100 to 300 percent, so treat every range as one publisher's view, not as a fact about the world. Second, a benchmark is no substitute for your own arithmetic. The right markup is the one that covers your full cost, pays your share of the overheads, and leaves a profit at the volume you can actually sell, at a price your customers will pay. If that number falls outside the published range, the range is wrong for you, not the other way around. Xero's advice is to review your markups at least quarterly, or whenever your supplier costs change, because costs drift and a markup set last year can quietly stop covering this year's bills.
There is one more reason to get the markup right, and it has nothing to do with benchmarks. Shopify cites a Harvard Business Review analysis by Michael Marn and Robert Rosiello, which found that for an average company, a 1 percent increase in price raises operating profit by 11.1 percent, while a 1 percent increase in sales volume raises operating profit by only 3.3 percent. A small price rise is three to four times more effective than the same increase in volume. That is the leverage a markup gives you: the price is the most powerful profit lever in the business, and the markup is how you set it.
How to price from a target markup
Most sellers price backwards: they pick a price that feels right and then discover what markup it gives them. Pricing from a target markup turns that around. You decide the markup first, from what the business needs to cover its overheads and leave a profit, and the formula sets the price. The table below shows the price and profit for a $60 cost at five target markups, so you can see how fast the price climbs as the markup rises.
| Target markup | Selling price on a $60 cost | Profit |
|---|---|---|
| 10.00% | $66.00 | $6.00 |
| 25.00% | $75.00 | $15.00 |
| 50.00% | $90.00 | $30.00 |
| 100.00% | $120.00 | $60.00 |
| 200.00% | $180.00 | $120.00 |
The trap to avoid runs the other way from the margin trap. A seller who wants a 30 percent margin on a $60 cost and adds 30 percent to the cost gets a price of $78.00, and the profit of $18.00 on a $78.00 price is a margin of 23.08 percent, not 30 percent. The seller applied a 30 percent markup and called it a margin, and the price is $7.71 too low: the correct price for a 30 percent margin is $60 divided by 0.70, which is $85.71. The gap between adding and dividing grows with the target: at a 50 percent target, adding gives $90.00 and a margin of 33.33 percent, while dividing gives $120.00 and a true 50 percent margin, a $30 difference on every sale. If your target is a margin, use the margin formula, or use our Profit Margin Calculator to set the price from the margin directly.
If you think in margin but price in markup, the table below converts the other way: the markup you need for the margin you want. A 40 percent margin needs a markup of 40 divided by 60 times 100, which is 66.67 percent. On a $60 cost, a 66.67 percent markup gives a price of $100.00, a profit of $40.00, and a margin of exactly 40.00 percent.
| Target margin | Markup you need |
|---|---|
| 20.00% | 25.00% |
| 25.00% | 33.33% |
| 30.00% | 42.86% |
| 40.00% | 66.67% |
| 50.00% | 100.00% |
Once the formula gives you a price, the market gets a vote. A price the formula produces may be higher than customers will pay, and then the answer is not to fudge the markup but to change one of the inputs: find a cheaper supplier, cut a cost, or accept a lower markup and make it up on volume. The find-the-cost mode is built for that conversation: if the market price is fixed at $80 and you need a 60 percent markup, your cost must be no more than $50.00, and a supplier quote above that tells you the deal does not work at that price. A price that ignores the market is a wish, and a markup that ignores the cost is a hope; the calculator keeps both honest.
Two details belong in any target-markup price. First, decide what counts as cost before you start, and count it the same way every time: materials, direct labor, packaging, shipping you pay, and marketplace or card fees that come out of the sale. A markup worked out on materials alone looks generous and then evaporates when the fees land. Second, remember that the markup here is a gross markup: it pays the overheads and leaves the profit, and it has to be big enough to do both. The next section separates gross from net so the target you pick is the right kind of markup.
Gross margin vs net margin
Gross margin and net margin measure profit at two different points, and confusing them is the second most expensive pricing mistake after confusing markup with margin. Gross margin is revenue minus the direct cost of what you sold, divided by revenue. Net margin is what is left after every other cost of running the business, divided by revenue. The gross margin is always the bigger number, because the net margin subtracts more. The markup on this page is a gross markup: it is worked out on the direct cost only, and it has to be big enough to pay the overheads and leave a profit.
Worked example. A shop takes in $10,000 in a month. The goods it sold cost $6,000 to buy. The gross profit is $10,000 minus $6,000, which is $4,000, and the gross margin is $4,000 divided by $10,000 times 100, which is 40.00 percent. The markup on those goods is $4,000 divided by $6,000 times 100, which is 66.67 percent. Then the shop pays $2,500 in rent, wages, utilities, and other overheads. The net profit is $4,000 minus $2,500, which is $1,500, and the net margin is $1,500 divided by $10,000 times 100, which is 15.00 percent. The same month has a 66.67 percent markup, a 40 percent gross margin, and a 15 percent net margin, and all three numbers are true at the same time.
A second example shows how wide the gap can be. A freelancer bills $2,000 for a project. The direct costs are $800, so the gross profit is $1,200, the gross margin is 60.00 percent, and the markup is $1,200 divided by $800 times 100, which is 150.00 percent. Overheads of $900 leave a net profit of $300, a net margin of 15.00 percent. A 150 percent markup sounds like a thriving business, and a 15 percent net margin is the reality after the bills. Neither number is wrong; they answer different questions.
This calculator works out gross markup and gross margin only. The cost you enter is the direct cost of the item or the goods sold, and the markup it returns is the gross markup on that cost. It does not subtract rent, wages, insurance, marketing, loan payments, or taxes, because those are overheads, not the cost of the item, and they belong in the net margin. If you enter your full cost including an overhead share, the result is closer to a net figure, but then you must say so when you quote it, because a markup worked out on a loaded cost is not the gross markup a lender or an accountant expects to see.
Use gross markup to price individual items and to judge whether a product line is worth selling. Use net margin to judge whether the business as a whole is healthy. A product with a thin markup can still be worth stocking if it brings in customers who buy other things, and a product with a fat markup can still lose money if the overheads it carries are heavy. The markup on one sale and the margin on the whole business are different measures, and a healthy business watches both.
What your result means
The headline result is the markup: the percent you added to the cost. The profit in dollars is the money that percent represents, and the two belong together, because a markup without dollars is a percent without a size. A 5 percent margin on $20,000 of revenue is $1,000 of profit, and a 40 percent margin on $2,500 of revenue is also $1,000 of profit. Same profit, very different business: the first needs high volume and tight operations, the second needs fewer sales at higher prices. Judge a markup by the dollars it produces at the volume you can actually sell, not by the percent alone.
The nearby table under the result answers the next question: what would a different markup mean in dollars? If your markup is 50 percent and you wonder what 100 percent would be worth, the table shows the price you would need to charge and the profit each sale would make. On a $100 cost, moving from a 50 percent markup to a 100 percent markup means raising the price from $150.00 to $200.00, and the profit per sale rises from $50.00 to $100.00. That $50.00 per sale is the value of the price rise, and you can weigh it against the sales you might lose at the higher price.
Discounts eat markup faster than most sellers expect, because a discount cuts the price while the cost stays put. A product priced at $100 with a cost of $60 has a markup of 66.67 percent and a margin of 40.00 percent. A 10 percent discount takes the price to $90, the profit falls to $30, the markup falls to 50.00 percent, and the margin falls to 33.33 percent. A 20 percent discount takes the price to $80, the profit falls to $20, the markup falls to 33.33 percent, and the margin falls to 25.00 percent. A 20 percent discount has cut the markup by 33.34 percentage points and halved the profit, from $40 to $20. Before you run a sale, work out the markup at the sale price, not at the list price, and check the result against what the business needs. Our Discount Calculator works out the sale price, and this calculator shows what markup is left at that price.
The markup also sets your break-even point: how many units you must sell before the business starts making money. Divide your fixed costs for the period by the profit on each unit. With fixed costs of $1,500 a month and a profit of $12.00 on each unit, you must sell 125 units a month to break even, because $1,500 divided by $12 is 125. With a profit of $18.00 on each unit, the break-even is $1,500 divided by $18, which is 83.33 units, and since you cannot sell a third of a unit, you need 84. A higher markup per unit means fewer sales to break even, which is why a small price rise can matter more than a big volume push.
Finally, remember what the result does not include. The markup here is gross: it does not subtract overheads, taxes, or fees you did not put in the cost box. A 100 percent markup is not 100 percent of the revenue in your pocket; it is a 50 percent gross margin to pay the overheads and then leave a profit. If the overheads take 25 percent of revenue, a 100 percent markup leaves a 25 percent net margin. Work the net margin out separately, from your own books, before you decide the business is healthy. When the price is set and the markup is right, our Invoice Generator turns the price into a professional invoice. You can find more business and shopping tools on the Tools Elite homepage.
Common mistakes to avoid
Confusing markup with margin. The biggest and most common error, covered in detail above. A 50 percent markup is a 33.33 percent margin. A 100 percent markup is a 50 percent margin. Doubling the cost does not give a 100 percent margin. Whenever someone quotes a percent, ask which number it divides by before you act on it.
Adding the margin percent to the cost. A 30 percent margin on a $60 cost is not a $78 price. Adding 30 percent to the cost gives a 30 percent markup and a 23.08 percent margin. Divide the cost by 1 minus the margin: $60 divided by 0.70 is $85.71. The gap between adding and dividing is $7.71 on every sale at a 30 percent target, and $30 at a 50 percent target.
Leaving costs out of the cost box. Materials alone are not the cost. Packaging, shipping you pay, marketplace fees, card processing, and your own time all come out of the sale, and a markup worked out without them is a fantasy. Count every cost that rises with each sale, and count it the same way every time, so markups from different months can be compared.
Setting one markup for everything. Different products have different cost structures, demand levels, and competitive pressures. A grocery line and a jewelry line cannot share a markup, and a fast-selling item can carry a thinner markup than a slow one. Xero lists this among the most common markup errors: apply different markups based on product category and market conditions, and review them at least quarterly.
Forgetting what a discount does to markup. A 20 percent discount on a $100 item with a $60 cost cuts the markup from 66.67 percent to 33.33 percent and halves the profit, from $40 to $20. Work out the markup at the sale price before you approve a promotion, and never let a discount take the price below the cost unless you know exactly what the loss buys you.
Quoting gross markup as if it were net margin. A 100 percent markup with overheads of 25 percent of revenue is a 25 percent net margin. Calling the markup the profit overstates the business and hides the overheads that have to be paid. Say which measure you mean, every time.
Treating a 100 percent margin as achievable. A 100 percent margin means the cost is zero, and on any positive cost the price would have to be infinite. The closest a real product gets is a very high margin on a very low cost. If a plan promises a 100 percent margin, someone has confused margin with markup, and the real margin is 50 percent.
Rounding at each step by hand. If you work out a price on paper and round each step to the nearest dollar, the errors compound, and on a big order they can drift by dollars. The calculator keeps the exact figures through every step and rounds only the displayed results, and it flags the cases where rounding moves the markup by a hundredth of a point. That flag is the rounding, not an error.
Swapping the cost and the selling price. Entering the selling price as the cost and the cost as the selling price gives a negative markup, and the calculator will show a loss. If you get a negative markup you did not expect, check which box holds which number before you change the price.
Pricing below cost without knowing the loss. Selling below cost can be a deliberate choice, to win a customer or clear stock, but it is a choice that needs a number attached. A $90 price on a $100 cost loses $10 a sale, a markup of minus 10.00 percent. Know the loss per sale, know how many sales you can afford, and know what the loss buys you, before the first discounted sale goes out.
Never adjusting the markup. Costs change over time: suppliers raise prices, shipping rates move, and demand shifts with the seasons. A markup set a year ago can quietly stop covering this year's costs. Xero's advice is to review your markups at least quarterly, or whenever your supplier costs change, and to treat a cost rise as a prompt to recalculate, not as a cost to absorb.
Frequently asked questions
How do you calculate markup?
Subtract the cost from the selling price to get the gross profit, divide the profit by the cost, and multiply by 100. For an item that costs $100 and sells for $150, the profit is $50, and $50 divided by $100 times 100 is 50 percent. Enter the cost and the selling price above and the calculator shows the markup, the margin, and every step of the arithmetic.
What is the difference between markup and margin?
Markup divides the profit by the cost; margin divides the profit by the revenue. On an item that costs $100 and sells for $150, the profit is $50, the markup is $50 divided by $100, which is 50 percent, and the margin is $50 divided by $150, which is 33.33 percent. The same profit is always a bigger markup than a margin, because the cost is smaller than the revenue. A 50 percent markup is a 33.33 percent margin, and a 100 percent markup is a 50 percent margin.
How do you calculate the selling price from cost and markup?
Multiply the cost by 1 plus the markup written as a decimal: for a 25 percent markup, multiply by 1.25. A product that costs $80 needs a price of $80 times 1.25, which is $100.00, and the profit is $20.00. Use the set-a-price mode above to work out any markup, or the find-the-cost mode to work backwards from a price you already charge.
What is a good markup percentage?
There is no single good markup: it depends on the industry, the volume, and the overheads the markup has to pay. Xero's guide says most small businesses aim for a markup between 50 percent and 100 percent, and lists typical ranges by industry: grocery and convenience stores 5 to 25 percent, retail clothing and accessories 50 to 100 percent, and jewelry 100 to 300 percent. The right question is not what other businesses charge but what your business needs: work out the markup that covers your full cost and your overheads at the volume you can actually sell, with a profit left over, and treat that as your target. Compare your markup with your own past months before you compare it with anyone else.
What is keystone pricing?
Keystone pricing sets the retail price at double the wholesale cost, which is a 100 percent markup and a 50 percent gross margin. Shopify's guide gives the example of ceramic mugs bought at $14 each wholesale and sold at $28 each retail. Fine jewelry retailers may follow triple keystone pricing, setting prices at roughly three times the wholesale cost. Keystone is a starting point, not a law: it ignores competitor prices, what shoppers will pay, and costs beyond wholesale such as shipping, overhead, duties, and fees.
Can markup be over 100 percent?
Yes. A markup over 100 percent simply means you charge more than double your cost: a 200 percent markup triples the cost, and a 300 percent markup quadruples it. Xero notes that jewelry, luxury goods, and specialty items routinely carry markups of 200 percent or higher, which is standard practice in those industries. What cannot pass 100 percent is the margin: on any positive cost, the margin can approach 100 percent but never reach it, because the cost is always part of the price.
How do you convert markup to margin?
Divide the markup by 100 plus the markup, and multiply by 100: a 50 percent markup gives 50 divided by 150 times 100, which is a 33.33 percent margin. To go the other way, divide the margin by 100 minus the margin, and multiply by 100: a 20 percent margin gives 20 divided by 80 times 100, which is a 25 percent markup. The calculator shows the equivalent margin next to every markup, so you never need to convert by hand.
How accurate is this markup calculator?
The arithmetic is exact: every figure is computed from the numbers you enter, with money rounded half up to the nearest cent and percents to two decimal places. The price and cost formulas can produce fractions of a cent, and rounding them can move the markup by a hundredth of a point, which the tool flags when it happens. What the calculator cannot know is your true cost: if a fee, a shipping charge, or your own time is missing from the cost box, the markup will be too high. Check the figures against your own books before setting a price.