Pond Build Cost Calculator
Estimated build cost
How the numbers were worked out
Plan the rest of the pond: our Koi Pond Feeding Calculator works out how much to feed your koi, our Reef Tank Setup Cost Calculator prices an indoor saltwater setup, our Concrete Calculator works out concrete for a pond base or edging, and our Volume Calculator checks any volume in gallons or cubic feet.
Last reviewed: 20 November 2026. Cost bands refreshed annually; next review due 19 May 2027.
How to use the Pond Build Cost Calculator
Building a pond is a dozen small purchases that add up to one large number, and most people budget for only half of them. The liner gets priced, the pump gets priced, and then the excavation, the underlayment, the edging stone, the hauling, and the labor arrive as surprises. This calculator prices the whole job at once: excavation, liner, underlayment, pump and filtration, edging, dirt hauling, waterfall, plants, fish, and labor, plus a 10 percent contingency for the surprises that still get through. It works for a small garden pond, a dedicated koi pond, and a wildlife pond, and it prices both a professional build and a do-it-yourself build so you can see what your own labor is worth.
Every rate in the calculator comes from a published 2026 source, and the page names each one. The headline benchmarks are Angi's 2026 figures: a national average of $3,382 to build a backyard pond, with most homeowners paying between $1,225 and $5,669, based on 620 verified projects. Liner rates are the midpoints of Angi's per-square-foot ranges. Digging rates are the midpoints of HomeGuide's per-cubic-yard bands by soil type. Where no publisher gives a single number, the calculator says so and uses a labeled planning figure, such as the labor-hours schedule or the edging rate, so you can judge it for yourself. Enter your own liner quote in the liner price field and the estimate follows your number instead of the midpoint.
To get your estimate, follow these steps:
- Choose the pond type. A garden pond is a decorative water feature with plants and perhaps a few goldfish. A koi pond is built around fish: it needs deeper water, stronger filtration, a pump that turns the whole volume over every hour, and a fish line in the budget. A wildlife pond is the lightest build, with the smallest filtration allowance and the lowest plants figure. The type also sets the benchmark range your total is compared against: $1,200 to $8,000 for a garden pond, $5,000 to $15,000 for a koi pond, and $3,000 to $12,000 for a wildlife pond, all from Angi's 2026 cost guide.
- Choose the shape. A rectangle holds its full length times width. An oval holds about 80 percent of its bounding rectangle, and a kidney shape about 70 percent. The shape changes the water volume, the digging volume, and the surface area, but not the liner: the liner is bought as a full rectangular sheet whatever the shape, so the offcuts on an oval or kidney pond are priced as waste. That is the honest way to price it, because you pay for the sheet you buy, not the shape you cut out of it.
- Enter the length and width in feet. Measure the longest side and the widest side, 2 to 200 feet each. For an oval or kidney pond, measure the bounding box: the longest and widest points of the outline. If you are still sketching, a typical suburban garden pond is 8 by 11 feet, and a typical koi pond is 11 by 16 feet or larger. Our Area Calculator checks the surface area of any shape before you enter it here.
- Enter the average depth in feet. Average depth, not the deepest point. A pond with shelves and a deep middle averages about three quarters of its deepest point, so a pond that is 4 feet at its deepest is about 3 feet on average. Depth drives the volume, the digging, the liner size, and the fish capacity all at once, which makes it the single most powerful number in the estimate. Garden ponds usually average 2 to 3 feet. Koi ponds usually average at least 3 feet, and the calculator warns you when a koi pond averages less. Enter 0.5 to 12 feet.
- Choose the liner material. EPDM rubber at 45 mil is the standard for garden and koi ponds: flexible, fish-safe, easy to patch, and rated for 20 to 30 years. PVC at 20 mil is cheaper and lighter but lasts 7 to 15 years and is sensitive to sun. HDPE is strong and UV resistant but stiff and hard to patch. RPE, reinforced polyethylene, is light and puncture resistant with a 20 to 40 year life. The calculator prices each at the midpoint of Angi's October 2026 per-square-foot range: EPDM $1.50, PVC $1.00, HDPE $0.85, and RPE $1.45.
- Enter your own liner price if you have one. Leave the liner price field blank to use the material midpoint, or enter a quote from a supplier to price the liner exactly. The field takes $0.10 to $10.00 a square foot. If your entered rate sits outside the published range for the material, the results say so and still use your figure as entered, because your quote beats a national midpoint.
- Decide on underlayment. Underlayment is the geotextile cushion between the soil and the liner, and it is priced at $0.28 a square foot over the same sheet size as the liner. Skipping it saves a small amount now and risks a puncture later: sharp stones and roots press straight into the liner without it. The calculator lets you leave it out, and the notes say plainly what that risks.
- Choose the soil type. Soil sets the digging rate, and the spread is wide: light soil $4.25, average soil $8.00, heavy or wet soil $12.50, and rocky soil $50.00 a cubic yard, each the midpoint of HomeGuide's published band. Rocky soil is the one to watch: HomeGuide's band for rock that has to be broken out runs from $50 to over $200 a cubic yard, so the calculator uses the floor of that band and warns you to treat the excavation figure as a floor, not a quote.
- Decide what happens to the dirt. A medium pond produces 8 to 20 cubic yards of soil, which is a pile the size of a small car several times over. Keeping it on the property, spread or bermed, costs nothing. Hauling it away adds $16.50 a cubic yard, the midpoint of HomeAdvisor's $8 to $25 range. If your lot has nowhere to put the dirt, the hauling line is not optional, and it is one of the costs people most often forget.
- Choose the build mode. A pro build adds labor at $100 an hour, the midpoint of Angi's $50 to $150 range, for a scheduled number of hours that grows with the pond: 16 hours under 500 gallons, rising to 80 hours above 6,000 gallons. A DIY build charges no labor and prices excavation as a rented mini excavator at $450 a day, the midpoint of HomeGuide's $200 to $700 a day, for 1 to 4 days depending on the digging volume. The calculator always works out both totals, so whichever mode you pick, the other one is shown beside it with the saving.
- Add a waterfall if you want one. No waterfall costs nothing. A small waterfall adds $900, the low end of the published $900 to $5,000 add-on band, and a large waterfall adds $2,950, the midpoint of the same band. A waterfall also needs pump capacity, which is why the pump sizing note matters: the flow figure on the results is the flow the pond needs, and a waterfall on top of that needs a bigger pump than the filter alone.
- Enter the number of koi. This field prices fish only in koi mode, at $35 each, the midpoint of the $20 to $50 common range for a healthy young pond koi. In garden and wildlife mode the field is ignored and no fish line appears. Each adult koi needs about 250 gallons of water, and the calculator warns you when the stocking goes below that. Start with fewer fish than the pond can hold: koi grow, and a pond stocked to the limit on day one is overstocked by year two.
The tool updates as you type, so you can try different numbers quickly. Try the example buttons under the form: the defaults show an 11 by 8 foot garden pond, 2.5 feet deep, professionally built for $7,095.66; the second is a 16 by 12 foot oval koi pond, 3.5 feet deep with a small waterfall, professionally built for $12,647.42; and the third is an 8 by 6 foot kidney wildlife pond, built yourself for $1,798.54. The three examples show the three shapes the answer takes: a mid-size professional build, a larger koi build, and a small DIY build.
Read the full result, not just the headline. The headline leads with the total for the mode you picked. The cards show the cost per square foot, the cost per gallon, the pond volume, the pump target in gallons per hour, and the other mode's total. The line-item table prices every part of the build. The guidance explains the result in plain language, including how your total compares with Angi's published range for your pond type. The warnings flag depth, stocking, rocky soil, permits, and any liner rate outside its published range. The steps print the full working so you can check every figure with your own arithmetic, and the notes carry the assumptions the estimate rests on.
How it works
The calculator runs in four stages: the pond geometry, the materials, the labor or rental, and the comparison. Each stage uses the result of the one before it, and the steps section on the page prints all four so you can check them against your own arithmetic. Nothing is hidden in a black box, and every rate carries its source.
Stage 1: pond geometry
Surface area is length times width times the shape factor: 1 for a rectangle, 0.8 for an oval, 0.7 for a kidney shape. Those factors are the standard pond-calculator convention: an oval fills about four fifths of its bounding rectangle, and a kidney shape about seven tenths. Volume is surface area times average depth times 7.48, the number of US gallons in a cubic foot, rounded to the nearest gallon. Digging volume is surface area times average depth divided by 27, the number of cubic feet in a cubic yard. The liner sheet is length plus twice the depth plus 2 feet of overlap, by width plus twice the depth plus 2 feet of overlap: the depth is counted twice because the liner runs down one side and up the other, and the extra 2 feet is 1 foot of overlap on each edge to anchor under the edging. The edge length is the perimeter: twice length plus width for a rectangle or kidney shape, and the Ramanujan ellipse approximation for an oval.
Stage 2: materials
Each line item is a quantity from stage 1 times a published rate. Excavation is the digging volume times the soil rate, with a $500 project minimum, because contractors charge a minimum for small jobs: HomeGuide puts the usual minimum at $500 to $800. The liner is the sheet area times the liner rate. Underlayment is the same sheet area times $0.28 a square foot. The pump and filtration line comes from a tier table by pond volume, with a higher table for koi ponds, because koi need stronger filtration than a planted pond of the same size. Edging is the perimeter times $15 a linear foot. Hauling, when chosen, is the digging volume times $16.50 a cubic yard. The waterfall is a flat $900 or $2,950. Plants are a flat allowance, $150 for a garden or koi pond and $100 for a wildlife pond. Fish are $35 each in koi mode only.
The pump and filtration tiers and the labor-hours schedule are planning figures, ours, set inside published bands rather than taken from any single publisher. The pump and filtration tiers sit inside Angi's $200 to $2,000 band for pumps and filtration, and they cross-check against retail prices: an Aquascape UltraKlean 2000 filter sells for about $480, and complete pond kits with pump, filter, skimmer, and liner run $1,336 to $1,520 for an 8 by 11 foot pond and $2,111 to $4,036 for an 11 by 16 foot pond. The labor hours sit inside Angi's $800 to $8,000 labor and design band at the $100 an hour midpoint. Both schedules are printed in full below so you can see exactly what the estimate assumes.
| Pond volume | Pump and filtration: garden and wildlife | Pump and filtration: koi | Labor hours (pro build) |
|---|---|---|---|
| Under 500 gallons | $250 | $400 | 16 |
| 500 to 1,499 gallons | $450 | $700 | 24 |
| 1,500 to 2,999 gallons | $750 | $1,100 | 40 |
| 3,000 to 5,999 gallons | $1,200 | $1,600 | 64 |
| 6,000 gallons and over | $1,800 | $2,000 | 80 |
The tiers step at 500, 1,500, 3,000, and 6,000 gallons, and a pond exactly on a boundary takes the higher tier: a 1,500 gallon pond uses the 1,500 to 2,999 gallon row. The same boundaries set the labor hours. That is a deliberate choice, not an accident: a pond at the top of one tier needs the equipment of the next, and pricing it at the lower tier would understate the cost.
Stage 3: labor or rental, then contingency
In pro mode, labor is the scheduled hours times $100 an hour, and excavation is the digging volume times the soil rate with the $500 minimum. In DIY mode there is no labor charge, and excavation is a rented mini excavator at $450 a day: 1 day up to 10 cubic yards, 2 days up to 30, 3 days up to 60, and 4 days above 60. The rental days are a planning schedule, ours. Note what the DIY price does not include: your time, fuel, delivery of the machine, or a dump truck. A DIY build that takes three weekends has a real cost in time that no calculator prices.
The subtotal is the sum of every line item. Contingency is 10 percent of the subtotal, rounded to the cent. Ten percent is a planning convention for a job where the ground hides the surprises: rock, roots, a buried pipe, or a liner sheet that needs to be bigger than the first measurement. The total is the subtotal plus the contingency. The calculator also works out the other build mode's total from the same lines, so the comparison is exact: the same pond, the same materials, only the labor and excavation method changed.
Stage 4: the comparison
The total is compared with Angi's 2026 professional range for the pond type, and the guidance says whether it sits below, inside, or above that range. A DIY total below the professional range is expected: the range covers professional builds, and a DIY build has no labor charge. A total above the range usually means a larger than average pond, rocky soil, or add-ons such as a waterfall or hauling, and the guidance points you at the line items to check. The cost per square foot and cost per gallon are the total divided by the surface area and the volume. Small ponds cost more per square foot than large ones, because labor, equipment, and the pump and filtration minimums do not shrink with size: that is real, not an error in the arithmetic.
Worked example 1: the defaults, a garden pond with a pro
An 11 by 8 foot rectangle garden pond, 2.5 feet deep on average, EPDM liner, underlayment, average soil, dirt kept on site, no waterfall, professionally built.
- Surface area: 11 ft x 8 ft = 88 sq ft
- Volume: 88 sq ft x 2.5 ft x 7.48 gallons per cubic foot = about 1,646 gallons
- Excavation: 88 sq ft x 2.5 ft / 27 = 8.15 cubic yards
- Liner: (11 + 2 x 2.5 + 2) ft x (8 + 2 x 2.5 + 2) ft = 270 sq ft at the EPDM rubber midpoint of $1.50 per sq ft = $405.00
- Underlayment: 270 sq ft at $0.28 per sq ft = $75.60
- Excavation (average soil): 8.15 cubic yards x $8.00 per cubic yard = $65.20, below the $500 project minimum, so $500.00 was used
- Pump and filtration: $750.00 for a pond of 1,646 gallons
- Edging: 38 ft around the pond x $15 per ft = $570.00
- Plants: $150.00
- Labor: 40 hours x $100 an hour = $4,000.00
- Subtotal: $500.00 + $405.00 + $75.60 + $750.00 + $570.00 + $150.00 + $4,000.00 = $6,450.60
- Contingency (10%): $6,450.60 x 10% = $645.06
- Total: $6,450.60 + $645.06 = $7,095.66
That sits inside Angi's $1,200 to $8,000 professional range for a garden pond. The same pond built yourself costs $2,640.66, saving $4,455.00, because the DIY build drops the $4,000.00 of labor and replaces the $500.00 excavation charge with one $450.00 rental day. The pump should move about 823 gallons an hour, turning the pond over every 2 hours. Cost per square foot is $80.63 and cost per gallon is $4.31: high per square foot because an 88 sq ft pond carries the same labor minimum as a much larger one.
Worked example 2: a koi pond with a waterfall
A 16 by 12 foot oval koi pond, 3.5 feet deep on average, EPDM liner, underlayment, average soil, dirt kept on site, small waterfall, 10 koi, professionally built.
- Surface area: 16 ft x 12 ft x 0.8 = 153.6 sq ft
- Volume: 153.6 sq ft x 3.5 ft x 7.48 gallons per cubic foot = about 4,021 gallons
- Excavation: 153.6 sq ft x 3.5 ft / 27 = 19.91 cubic yards
- Liner: (16 + 2 x 3.5 + 2) ft x (12 + 2 x 3.5 + 2) ft = 525 sq ft at the EPDM rubber midpoint of $1.50 per sq ft = $787.50
- Underlayment: 525 sq ft at $0.28 per sq ft = $147.00
- Excavation (average soil): 19.91 cubic yards x $8.00 per cubic yard = $159.28, below the $500 project minimum, so $500.00 was used
- Pump and filtration: $1,600.00 for a pond of 4,021 gallons
- Edging: 44.21 ft around the pond x $15 per ft = $663.15
- Waterfall (small): $900.00
- Plants: $150.00
- Fish: 10 koi x $35 each = $350.00
- Labor: 64 hours x $100 an hour = $6,400.00
- Subtotal: $500.00 + $787.50 + $147.00 + $1,600.00 + $663.15 + $900.00 + $150.00 + $350.00 + $6,400.00 = $11,497.65
- Contingency (10%): $11,497.65 x 10% = $1,149.77
- Total: $11,497.65 + $1,149.77 = $12,647.42
That sits inside Angi's $5,000 to $15,000 professional range for a koi pond. The same pond built yourself costs $6,047.42, saving $6,600.00. The pump should move about 4,021 gallons an hour, a full turnover every hour, which is the standard koi target. Each fish has about 402.1 gallons, comfortably above the usual 250 gallons per adult koi. Note that the excavation minimum applies again: 19.91 cubic yards at $8.00 is only $159.28 of digging, and no contractor mobilizes a machine for that, so the $500 minimum governs.
Worked example 3: a small wildlife pond, DIY
An 8 by 6 foot kidney wildlife pond, 2 feet deep on average, PVC liner, underlayment, light soil, dirt kept on site, no waterfall, built yourself.
- Surface area: 8 ft x 6 ft x 0.7 = 33.6 sq ft
- Volume: 33.6 sq ft x 2 ft x 7.48 gallons per cubic foot = about 503 gallons
- Excavation: 33.6 sq ft x 2 ft / 27 = 2.49 cubic yards
- Liner: (8 + 2 x 2 + 2) ft x (6 + 2 x 2 + 2) ft = 168 sq ft at the PVC midpoint of $1.00 per sq ft = $168.00
- Underlayment: 168 sq ft at $0.28 per sq ft = $47.04
- Excavation (DIY): a mini excavator at $450 a day for 1 day = $450.00
- Pump and filtration: $450.00 for a pond of 503 gallons
- Edging: 28 ft around the pond x $15 per ft = $420.00
- Plants: $100.00
- Labor: $0.00, because this is a DIY build
- Subtotal: $450.00 + $168.00 + $47.04 + $450.00 + $420.00 + $100.00 = $1,635.04
- Contingency (10%): $1,635.04 x 10% = $163.50
- Total: $1,635.04 + $163.50 = $1,798.54
That is below Angi's $3,000 to $12,000 professional range for a wildlife pond, as expected: the range covers professional builds and this one has no labor charge. A pro would charge $4,493.54 for the same pond. The pump should move about 252 gallons an hour, turning the pond over every 2 hours. At 503 gallons the pond sits just over the 500 gallon tier boundary, so it takes the $450 pump and filtration tier rather than the $250 tier: one gallon under the boundary would have changed the tier, which is why the tier boundary is printed in the table above.
What a pond build costs in 2026
The benchmark for this calculator is Angi's pond cost guide, updated September 23, 2026, built from 620 verified projects by Angi Pros. The national average cost to build a backyard pond in 2026 is $3,382, with most homeowners paying between $1,225 and $5,669. Elaborate installations run past $11,000, and the simplest projects start around $300. Labor rates run $50 to $150 an hour depending on location and complexity. Those are professional-build figures: a DIY build comes in lower, and Angi puts the DIY saving at up to 40 percent.
Cost splits by pond type, because each type carries different engineering. A garden pond is mostly digging, lining, and edging. A koi pond adds depth, filtration, and fish. A swimming pond needs safety engineering and advanced filtration. A farm pond is mostly earthmoving at scale.
| Pond type | Average cost range in 2026 | What drives the price |
|---|---|---|
| Garden pond | $1,200 to $8,000 | Decorative, small backyard, simple filtration |
| Koi pond | $5,000 to $15,000 | Specialized system to support fish |
| Wildlife pond | $3,000 to $12,000 | Natural habitat, lighter filtration |
| Swimming pond | $15,000 to $40,000 | Engineered for human use, advanced filtration and safety |
| Farm pond | $2,500 to $20,000 | Functional, larger, more land preparation |
Source: Angi, What Does It Cost to Build a Pond? [2026 Data], updated September 23, 2026. This calculator covers garden, koi, and wildlife ponds. Swimming ponds and farm ponds are different jobs: a swimming pond needs engineering this calculator does not model, and a farm pond is priced by the acre, not by the line item.
Cost also splits by size, and size is the most direct driver: a larger pond needs more digging, a bigger liner, a stronger pump, and more edging. Angi's size table is the cleanest statement of it.
| Pond size | Description | Average cost in 2026 |
|---|---|---|
| 50 sq ft, 400 gallons | Small decorative pond | $1,200 to $3,000 |
| 150 sq ft, 1,200 gallons | Medium backyard pond | $4,000 to $8,000 |
| 300 sq ft, 2,400 gallons | Large koi or wildlife pond | $9,000 to $18,000 |
| 600 sq ft, 5,000 gallons and over | Swimming or farm pond | $15,000 to $40,000 |
Source: Angi, same guide. A second guide, Lawn Love's 2026 pond installation cost page, puts the national average at $7,400 for midsize backyard ponds with waterfalls, plants, and fish, in a typical range of $3,675 to $14,500, with garden ponds at $1,900 to $6,500 and koi ponds at $5,100 to $15,875. The two guides disagree on the average because they measure different ponds: Angi's $3,382 average covers all backyard pond projects including small ones, while Lawn Love's $7,400 average covers midsize ponds with features. Both are quoted here so you can see the spread rather than a single number presented as settled. This calculator's own totals sit close to Lawn Love's size table for the same dimensions: a 4 by 6 foot garden pond prices at $3,314.96 against Lawn Love's $2,350 to $5,000, an 11 by 16 foot pond at $10,776.61 against $8,670 to $14,500, and a 16 by 21 foot pond at $14,078.77 against $14,165 to $20,335.
Angi also breaks the total into line items, which is the structure this calculator follows. The ranges are wide because each line covers every pond size at once.
| Line item | Low end in 2026 | High end in 2026 |
|---|---|---|
| Excavation | $500 | $5,000 |
| Pond liner | $150 | $7,000 |
| Pumps and filtration | $200 | $2,000 |
| Edging and landscaping | $300 | $5,000 |
| Water features | $400 | $7,500 |
| Lighting and electrical | $250 | $3,000 |
| Plants and fish | $100 | $2,500 |
| Labor and design | $800 | $8,000 |
Source: Angi, same guide. Two lines in that table need a note. First, Angi's prose elsewhere in the same guide says small backyard ponds cost $10 to $20 per square foot, but its own size table implies $24 to $60 per square foot: a 50 sq ft pond at $1,200 to $3,000 is $24 to $60 a square foot, and a 150 sq ft pond at $4,000 to $8,000 is $27 to $53 a square foot. The table governs: the prose figure does not survive its own numbers, and this calculator's per-square-foot figures, which run higher still on small ponds because of fixed labor and equipment minimums, are consistent with the table, not the prose. Second, lighting and electrical, at $250 to $3,000, is the one Angi line this calculator does not price: outdoor power for a pump and lights varies too much by distance from the house and local electrical code to estimate from pond dimensions alone, so it is flagged here as an extra to budget separately.
Liner materials compared
The liner is the part of the pond you cannot see and cannot afford to get wrong. It holds the water, and replacing it means draining the pond, removing the fish, and lifting the edging. Angi's liner cost guide, updated October 30, 2026, puts the national average cost to install a pond liner at $1,000, with most homeowners paying between $640 and $3,980, and liner material at $0.50 to $3.50 per square foot depending on material, thickness, and depth.
| Liner material | Cost per sq ft in 2026 | Midpoint used here | Lifespan |
|---|---|---|---|
| EPDM rubber | $0.70 to $2.30 | $1.50 | 20 to 30 years |
| PVC | $0.50 to $1.50 | $1.00 | 7 to 15 years |
| HDPE | $0.40 to $1.30 | $0.85 | 20 to 25 years |
| RPE | $0.90 to $2.00 | $1.45 | 20 to 40 years |
| Vinyl | $0.50 to $2.00 | Not offered | 10 to 20 years |
| Fiberglass | $3.00 to $6.50 | Not offered | 30 years and over |
| Concrete | $60 to $120 | Not offered | 30 years and over |
Source: Angi, How Much Does a Pond Liner Cost? [2026 Data], updated October 30, 2026. The calculator offers the four flexible sheet materials: EPDM, PVC, HDPE, and RPE. Vinyl, fiberglass, and concrete are not offered because they are not bought by the sheet in the same way: vinyl is a custom fabrication, fiberglass is a rigid shell, and concrete is a construction job, not a material purchase. If your pond uses one of those, enter the material cost as a liner rate override and treat the total as approximate.
Retail prices cross-check the midpoints. A Firestone PondGard 45 mil EPDM sheet, 15 by 20 feet, sells for about $320, which is $1.07 a square foot, and a 10 by 15 foot sheet at about $1.03 a square foot. A 2026 retailer catalog lists EPDM at $1.70 a square foot and underlayment at $0.45 a square foot. The calculator's EPDM midpoint of $1.50 sits between the online sheet price and the catalog price, which is where a planning figure should sit. The underlayment rate of $0.28 is the midpoint of the published $0.10 to $0.45 range, rounded to the cent: the low end comes from budget geotextile, the high end from a retailer catalog, and the midpoint is the planning figure.
Liner sizing follows the standard formula: pond length plus twice the depth plus 2 feet of overlap, by pond width plus twice the depth plus 2 feet of overlap. Two overlap conventions exist in the trade: most guides add 2 feet, 1 foot on each side, while The Pond Guy adds 1 foot in total. This calculator uses the 2 foot convention, which is the majority practice and the safer one: a liner that comes up short cannot be stretched, and the cost of the extra foot is small against the cost of a second sheet. The sheet is priced whole, whatever the pond shape, because offcuts are waste.
Excavation and soil
Digging is the most variable line in the estimate, because the ground is the one part of the job you cannot see before you start. HomeGuide's excavation cost guide, dated February 2026, prices digging by the cubic yard by soil type, labor and equipment included: light soil $2.50 to $6.00, average soil $6.00 to $10.00, heavy or wet soil or loose rock $10.00 to $15.00, and jackhammered rock $50 to over $200 a cubic yard. The calculator uses the midpoint of each band: $4.25, $8.00, $12.50, and $50.00, the floor of the rock band. HomeGuide also puts the usual contractor project minimum at $500 to $800, which is why the calculator floors excavation at $500: the digging volume of a small pond, at $8.00 a yard, is often under $200, and no contractor mobilizes a machine for that.
One disagreement in the published sources is worth stating plainly rather than averaging away. HomeGuide prices digging at $2.50 to $15.00 a cubic yard, while Angi, Fixr, This Old House, and CivilMath publish $50 to $200 a cubic yard for excavation. The guides do not price the same scope under the same label: HomeGuide's figure is digging with labor and equipment for residential earthmoving, while the $50 to $200 figures cover all-in exterior excavation, mostly basements and foundations, where shoring, access, and disposal dominate. For a backyard pond, HomeGuide's digging rates govern, because they match the job: open digging in a yard with somewhere to put the dirt. The $50 to $200 figures are the right warning for rock, which is why rocky soil in this calculator starts at $50 a cubic yard with a warning that it can run past $200.
For a DIY build, the digging cost is a machine rental, not a per-yard rate. HomeGuide puts a mini excavator rental at $200 to $700 a day, machine only, and Angi puts a mini excavator at $150 to $350 a day. The calculator uses $450 a day, the midpoint of HomeGuide's band, for 1 to 4 days by digging volume. A mini excavator digs 5 to 11 feet deep depending on the machine, which covers any garden pond. The rental covers the machine only: you run it, you fuel it, and the dirt is still yours to move. Call 811 before you dig, in any mode: buried lines are the one excavation surprise that is free to prevent and expensive to hit.
Hauling the dirt away is priced at $16.50 a cubic yard, the midpoint of HomeAdvisor's $8 to $25 range. That is the rate for hauling soil off the lot. Spreading it on the property costs nothing but space, and a medium pond produces enough soil for a substantial berm or a raised bed. If the dirt has to leave, the hauling line can rival the digging line: 20 cubic yards costs $330 to haul at the midpoint, against $160 of digging in average soil.
Pumps, filtration, and turnover
The pump is the heart of the pond: it moves water through the filter, and the filter is what keeps the water clear and the fish alive. Pump size is set by turnover, the time it takes to move the whole pond volume through the filter once. For a garden or wildlife pond, the standard rule is a full turnover every 2 hours: a 1,000 gallon pond needs a 500 gallon-per-hour pump at minimum. For a koi pond, the standard target is one full turnover every hour: a 3,000 gallon koi pond needs about 3,000 gallons per hour. Heavily stocked koi ponds run 1.5 to 2 turnovers an hour. The calculator sizes the pump by those rules and prints the target flow in the results.
One detail matters more than the rule: the flow on the box is not the flow in the pond. Pump manufacturers rate output at zero head, with no lift and no resistance. Every foot of vertical lift, every elbow, and the filter itself cut the real flow, typically by 20 to 40 percent. A pump rated 5,000 gallons per hour may deliver only 3,200 once plumbing and a waterfall are factored in. Buy the pump for the flow you need at your head height, not for the number on the box, and size the pipe to the flow: too small a pipe at high flow builds pressure that the fittings were not made for.
Pumps cost $50 to $500 and filters $150 to $1,300, from Lawn Love's 2026 figures. A pressure filter with a UV clarifier for a 2,000 gallon pond, the Aquascape UltraKlean 2000, sells for about $480. Complete pond kits, which bundle pump, filter, skimmer, liner, and underlayment, run $1,336 to $1,520 for an 8 by 11 foot pond, $2,111 to $4,036 for an 11 by 16 foot pond, and $3,188 to $6,124 for a 16 by 21 foot pond, across the Aquascape, EasyPro, and Atlantic Water Gardens lines. Kits are worth comparing against the calculator's itemized total: a kit can be cheaper than buying the parts separately, and it guarantees the parts fit each other. The calculator's pump and filtration tiers sit inside Angi's $200 to $2,000 band and are consistent with those retail prices.
Running costs continue after the build. Angi puts the electricity for pumps, filters, and lights at $10 to $40 a month depending on pond size and features, and professional pond maintenance at $400 to $4,000 a year. Those are running costs, not build costs, so the calculator does not include them, but they belong in the decision: a pond with a large pump and a waterfall costs more every month than a pond with a small pump and no waterfall, for as long as the pond runs.
Koi ponds: depth, stocking, and fish prices
Koi change the build in three ways: depth, filtration, and stocking. Depth first: koi ponds are usually at least 3 feet deep on average, and 3 to 4 feet is the standard recommendation. Deep water stays cool in summer, stays liquid below the ice in winter, and gives large fish room to turn. A shallow koi pond is a fish health problem waiting for a hot week. The calculator warns you when a koi pond averages under 3 feet, and warns again under 1.5 feet for any pond type, where the water can freeze solid in a cold winter and overheat in a hot summer.
Stocking second: each adult koi needs about 250 gallons of water. That is the planning figure the calculator uses, and it is the figure the warnings test against. A 2,500 gallon pond holds 10 adult koi; a 1,000 gallon pond holds 4. The number sounds generous until the fish grow: koi reach 24 to 36 inches and live 25 to 50 years, so a pond stocked to the limit with juveniles is badly overstocked within a few years. Stock gradually, after the filter is cycled, and start with fewer fish than the pond can hold. Our Koi Pond Feeding Calculator works out how much to feed the fish once they are in.
Fish prices third: koi prices range further than any other line in the build, from a few dollars to the record auction price of about $1.8 million for one Kohaku in 2018. For budgeting, the useful bands are the ordinary ones. Small pet-store or pond-grade koi under 6 inches run $5 to $50, with $20 to $50 the common price for a healthy young fish. Domestic pond koi, larger or better grade, run $50 to $500. Young imported Japanese koi run $300 to $1,500, and hand-selected Japanese koi $800 to $5,000, with a median of about $2,000 at one US dealer. Show-quality fish start at $5,000 and have no practical ceiling. The calculator prices fish at $35 each, the midpoint of the $20 to $50 common range for a healthy young pond koi, which is the right figure for a first pond. If you plan to buy imported fish, the fish line is the one to change first: ten imported koi at $2,000 each cost more than the rest of the pond put together.
DIY vs pro
The choice between building the pond yourself and hiring a professional is mostly a choice about labor, and labor is the largest line in most professional builds. In the default example, an 11 by 8 foot garden pond, labor is $4,000.00 of a $7,095.66 total: more than half. Doing it yourself drops the labor and replaces the $500 excavation charge with a $450 rental day, for a total of $2,640.66 and a saving of $4,455.00. In the koi example, the saving is $6,600.00. Angi puts the DIY saving at up to 40 percent; this calculator's saving runs higher than that on small ponds, because the labor schedule is a large share of a small total and the DIY excavation is a single rental day.
The saving is real, but it is not free. A DIY build takes several weekends for a small pond and longer for a large one, and the common DIY mistakes are expensive to fix: a badly installed liner leaks, and repairing a botched liner costs $500 to $1,000; an undersized pump leaves the water green; poor grading causes runoff and erosion. Electrical work around water is the one task to hire out whatever else you do yourself: improper electrical work near a pond is a safety hazard, not a budget item. Angi's advice is to hire a professional for large, deep, or complex ponds and for any project involving electrical or plumbing work, and to do the digging, planting, and landscaping yourself if you want to save money without taking on the skilled parts.
There is one case where the DIY route is not clearly cheaper, and the calculator shows it honestly. For a very small pond, the excavation minimum and the rental day are close: a pro charges a $500 minimum for the digging, while a DIY build pays $450 for one rental day. The saving on a tiny pond comes almost entirely from the labor line, not from the digging. And for a pond where the soil is rocky, a DIY build with a rented mini excavator may not be able to break the rock at all: rock that needs breaking is a job for a larger machine with a breaker, which is a pro job at $50 to over $200 a cubic yard.
Whichever route you take, get at least two local quotes for the professional work, and check permits before digging. Permit fees run $100 to $2,000 depending on the area and the pond size, and some municipalities require permits for ponds above a certain size or depth. Skipping a permit risks fines, delays, or being required to remove the pond. The calculator warns you when the pond reaches 300 sq ft, which is a common point for permit requirements to start applying, but the only authority is your local building department.
Features
Three pond types. Garden, koi, and wildlife ponds, each with its own filtration tier, benchmark range, and guidance. Koi mode adds the fish line, the hourly turnover target, the depth warning, and the stocking check.
Three shapes. Rectangle, oval, and kidney, with the volume factors the trade uses and the liner always priced as a full sheet.
Four liner materials with your own price. EPDM, PVC, HDPE, and RPE at published midpoints, or enter a supplier quote and the estimate follows it, with a warning if your rate sits outside the published range.
Soil-based excavation. Four soil types at published per-yard rates, with a $500 project minimum and a rocky-soil warning that the figure is a floor.
DIY and pro side by side. Both totals are worked out from the same lines, so the saving is exact and the comparison is honest.
Full working shown. Every result prints the steps: surface area, volume, digging, liner, underlayment, excavation, pump and filtration, edging, hauling, waterfall, plants, fish, labor, subtotal, contingency, and total. Every figure can be checked with a pocket calculator.
Benchmark comparison. Every total is compared with Angi's 2026 professional range for the pond type, so you can see whether your pond is typical, small, or ambitious before you commit.
Use cases
Budgeting a first garden pond. Enter the size you have room for and see the whole job priced at once, including the lines people forget: underlayment, edging, hauling, and contingency. If the total is above your budget, shrink the pond or drop the waterfall before you drop the underlayment: the liner is the one line that punishes false economy.
Planning a koi pond. Use koi mode to price the deeper dig, the stronger filtration, and the fish together. Check the stocking warning: if the pond holds fewer than 250 gallons per fish, plan a bigger pond or fewer fish now, while changing the size costs nothing.
Comparing quotes. Run the calculator with your pond's dimensions and your liner supplier's rate, then compare the itemized total with a contractor's quote line by line. A quote far above the estimate needs an explanation: more rock, longer access, or a bigger waterfall. A quote far below it needs one too: something may be missing from the scope.
Deciding DIY or pro. The two totals are the decision in numbers. If the saving is large and the pond is small and simple, DIY is a real option. If the saving is small against the size of the job, or the soil is rocky, or the pond is deep, the professional build buys expertise and a warranty for a modest premium.
Sizing the pump before you buy. The pump target in the results is the flow the pond needs at the pond, not the number on the box. Take that figure to the pump charts, add head height, and buy the pump that delivers it at your head height.
Checking a kit price. Price the pond item by item, then compare with a complete pond kit for the same size. Kits bundle the pump, filter, skimmer, liner, and underlayment, and for standard sizes they can beat the itemized total while guaranteeing the parts fit.
Sources
All figures were re-verified from the publisher's own page on November 20, 2026. Where two publishers disagree, the disagreement is stated, not averaged away.
- Angi, What Does It Cost to Build a Pond? [2026 Data], updated September 23, 2026: national average $3,382, typical range $1,225 to $5,669, 620 verified projects; line-item ranges; cost by pond type; cost by size; labor $50 to $150 an hour; DIY saving up to 40 percent; permit fees $100 to $2,000; maintenance $400 to $4,000 a year.
- Angi, How Much Does a Pond Liner Cost? [2026 Data], updated October 30, 2026: liner installation average $1,000, range $640 to $3,980; liner material $0.50 to $3.50 per square foot; material table with lifespans; operating costs $10 to $40 a month.
- Lawn Love, How Much Does It Cost to Install a Pond in 2026?: midsize ponds $3,675 to $14,500, average $7,400; garden ponds $1,900 to $6,500; koi ponds $5,100 to $15,875; cost by size table; pumps $50 to $500; filters $150 to $1,300.
- HomeGuide, How Much Does Excavation Cost (2026), dated February 5, 2026, as cited in current cost guides: digging $2.50 to $15.00 a cubic yard by soil type; jackhammered rock $50 to over $200 a cubic yard; project minimum $500 to $800; mini excavator rental $200 to $700 a day; pond excavation $300 to $3,200.
- Angi, Excavator Rental Prices [2026 Data], updated October 19, 2026: mini excavator $150 to $350 a day, $30 to $60 an hour; excavation $3 to $20 a cubic yard; hauling $150 to $250 a cubic yard for disposal.
- Remodel Cost Hub, How Much Does an Excavation Cost in 2026?: the published per-cubic-yard disagreement, stated not averaged: HomeGuide $2.50 to $15.00 against Angi, Fixr, This Old House, and CivilMath at $50 to $200, with different scopes under the same label.
- ArmorThane, Pond Liner Guide: Materials, Sizes and Calculator (2026): liner sizing formula, length plus twice the depth plus 2 feet; the two overlap conventions, 2 feet against The Pond Guy's 1 foot; EPDM $0.75 to $2.50 a square foot; underlayment $0.10 to $0.25 a square foot.
- BuildEstimatory, Free Pond Calculator, Volume, Liner and Pump (2026): shape factors, oval 0.8 and kidney 0.7; turnover every 2 hours for a garden pond; liner size formula; edging $200 to $1,000.
- FishCareAI, Koi Pond Pump Size Calculator: one turnover per hour as the standard koi target; 1.5 times an hour for heavy stocking; 2 times an hour for show ponds.
- Toyoma Koi, Koi Fish Prices (2026): small pet-store koi $5 to $50; domestic pond koi $50 to $500; young imported Japanese koi $300 to $1,500; hand-selected Japanese koi $800 to $5,000, median about $2,000; record auction price about $1.8 million in 2018.
- Giobel Koi Center, Koi Fish Cost: $10 to $1.8 Million (Real Price Breakdown): juvenile pond-grade koi $10 to $80; hobby-grade medium koi $100 to $500; beginners advised to start at $20 to $150 per fish.
- Pond Pro Direct, Aquascape vs. EasyPro vs. Atlantic Water Gardens (2026): complete pond kit prices by size, $1,336 to $6,124 across the three brands.
Planning figures set by this calculator, not taken from any publisher, and labeled as such wherever they appear: the pump and filtration tier table; the labor-hours schedule; the rental-days schedule; the edging rate of $15 a linear foot; the plants allowances of $150 and $100; the 10 percent contingency; and the 300 sq ft permit warning threshold. The HomeAdvisor hauling range of $8 to $25 a cubic yard is cited through current cost guides quoting HomeAdvisor's guide.
Frequently asked questions
How much does it cost to build a pond?
The national average cost to build a backyard pond in 2026 is $3,382, with most homeowners paying between $1,225 and $5,669, according to Angi, based on 620 verified projects. Garden ponds run $1,200 to $8,000, koi ponds $5,000 to $15,000, and wildlife ponds $3,000 to $12,000. A small DIY pond can cost under $2,000, while a large koi pond with a waterfall can pass $12,000. The size, the soil, and whether you hire a pro move the total more than any other factor. Enter your pond's dimensions above for an itemized estimate.
How much does a koi pond cost to build?
A koi pond costs $5,000 to $15,000 professionally built, according to Angi's 2026 figures. Koi cost more than garden ponds because they need deeper water, stronger filtration, and a pump that turns the whole volume over every hour instead of every 2 hours. Fish add $35 each for young pond-grade koi, but imported Japanese koi run $300 to $5,000 each and can cost more than the rest of the pond. A 16 by 12 foot oval koi pond, 3.5 feet deep with a small waterfall and 10 fish, prices at $12,647.42 professionally built, or $6,047.42 built yourself.
What size pump do I need for my pond?
Size the pump by turnover. A garden or wildlife pond needs a full turnover every 2 hours, so a 1,000 gallon pond needs a pump moving at least 500 gallons an hour. A koi pond needs one full turnover every hour, so a 3,000 gallon koi pond needs about 3,000 gallons an hour. Heavily stocked koi ponds run 1.5 to 2 turnovers an hour. Buy for the flow at your head height, not the number on the box: lift, pipe, and the filter cut a pump's rated output by 20 to 40 percent. This calculator prints your target flow in the results.
How do I work out the liner size for a pond?
Add twice the depth plus 2 feet of overlap to both the length and the width. An 11 by 8 foot pond, 2.5 feet deep, needs a liner (11 plus 5 plus 2) by (8 plus 5 plus 2) feet, which is 18 by 15 feet, or 270 square feet. The depth is counted twice because the liner runs down one side and up the other, and the extra 2 feet is 1 foot of overlap on each edge to anchor under the edging. Buy the full sheet whatever the pond shape: offcuts from an oval or kidney pond are waste.
Is it cheaper to build a pond yourself?
Yes, usually by a large amount, because labor is the biggest line in most professional builds. An 11 by 8 foot garden pond costs $7,095.66 with a pro and $2,640.66 built yourself, a saving of $4,455.00. Angi puts the DIY saving at up to 40 percent. The saving is real but not free: a DIY build takes several weekends, and the common mistakes are expensive to fix, with a botched liner repair costing $500 to $1,000. Hire out the electrical work whatever else you do yourself, and hire a pro for large, deep, or rocky ponds.
How deep should a pond be?
A garden pond usually averages 2 to 3 feet deep. A koi pond should average at least 3 feet, and 3 to 4 feet is the standard recommendation, so the fish have cool water in summer and room below the ice in winter. Below 1.5 feet on average, any pond can freeze solid in a cold winter and overheat in a hot summer. Measure average depth, not the deepest point: a pond with shelves and a deep middle averages about three quarters of its deepest point. This calculator warns you when a koi pond averages under 3 feet.
How many koi can I keep in my pond?
Allow about 250 gallons of water per adult koi. A 2,500 gallon pond holds 10 adult koi, and a 1,000 gallon pond holds 4. Koi reach 24 to 36 inches and live 25 to 50 years, so a pond stocked to the limit with juveniles is badly overstocked within a few years. Stock gradually, after the filter is cycled, and start with fewer fish than the pond can hold. This calculator warns you when the stocking goes below 250 gallons per fish.
What does pond excavation cost?
Digging costs $2.50 to $15.00 a cubic yard by soil type, according to HomeGuide: light soil $2.50 to $6.00, average soil $6.00 to $10.00, heavy or wet soil $10.00 to $15.00, and rock that has to be broken out $50 to over $200 a cubic yard. Contractors charge a project minimum of $500 to $800, so small ponds pay the minimum rather than the per-yard rate. A mini excavator rental for a DIY build runs $200 to $700 a day. Hauling the dirt away adds $8 to $25 a cubic yard. This calculator uses the midpoint of each band and floors excavation at $500.