Aquarium Salt Mix Calculator
Your salt mix
How the numbers were worked out
Planning the tank around the mix: our Reef Tank Setup Cost Calculator prices a new reef tank from tank to livestock, our Aquarium Fish Compatibility Checker checks which fish share a tank, our Aquarium Fish Food Cost Calculator works out feeding costs, and our Volume Calculator works out a tank's water volume from its dimensions.
Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.
How to use the Aquarium Salt Mix Calculator
Every saltwater keeper mixes water on a regular schedule: a weekly water change, a top-up after a spill, a fresh batch for a new tank. The question is always the same, and it is always worth getting right: how much salt goes into this much water. Too little and the salinity lands low, stressing corals and fish. Too much and the batch reads high and has to be diluted. This calculator answers the question from the salt maker's own published dose, for the brand you actually use, at the salinity you actually want, in gallons or liters, with the answer in grams, cups, kilograms, ounces, and pounds. It also runs the other direction: when a tank's salinity has drifted high or low, the correction mode works out how much salt to add or how much RO water to add, and spreads the change over days so the livestock never faces a sudden swing.
The calculator has two modes. Mix mode is for a fresh batch: you are starting from RO water and you want to know how much salt mix makes it the right salinity. Correction mode is for a tank that already has water in it: you enter the salinity it reads now and the salinity you want, and the calculator tells you how much salt to add, or how much RO water to add, to close the gap. Pick the mode at the top of the form. Everything else follows from that one choice.
To get your result, follow these steps:
- Choose the mode. Mix a fresh batch is for new saltwater. Correct a tank is for a tank whose salinity has drifted. In correction mode two extra fields appear for the current salinity.
- Enter the water volume. This is the volume of water you are mixing, or the volume of the tank you are correcting. Enter it in US gallons or liters, using the unit dropdown next to the field. The volume must be between 0.1 liters and 100,000 liters. For a water change, enter the volume of the change, not the volume of the tank: a 10 gallon change on a 50 gallon tank takes the salt for 10 gallons. If you are not sure of your tank's volume, our Volume Calculator works it out from the tank's dimensions, and our Unit Converter converts between gallons and liters.
- Choose your salt brand. The list carries eight published salts: Instant Ocean Sea Salt, Instant Ocean Reef Crystals, Red Sea Salt, Red Sea Coral Pro Salt, Tropic Marin Pro-Reef, Tropic Marin Classic, Aquaforest Reef Salt, and Aquaforest Sea Salt. The brand matters because the makers publish different doses: at 35 ppt, Instant Ocean needs 43.1 grams per liter and Red Sea Salt needs 38.2 grams per liter, a difference of about 13 percent on the same batch. Picking the wrong brand is the most common reason a batch reads off. If your salt is not on the list, choose Custom salt and enter the dose from your own packet: the grams per liter and the salinity that figure is set at.
- Enter the target salinity. Enter it in ppt (parts per thousand) or as specific gravity, using the unit dropdown. Natural seawater is 35 ppt, which reads SG 1.0264 at 25 °C. Most reef tanks run 33 to 35 ppt. A fish-only tank often runs a little lower. The target must be between 1 and 50 ppt, or between SG 1.001 and 1.040.
- In correction mode, enter the current salinity. This is the reading your refractometer gives today, in ppt or SG. The current reading can be 0 ppt, for a tank that holds fresh water, up to 50 ppt. If the current and target readings match, the calculator says so and tells you nothing is needed.
- Read the full result, not just the headline. The headline leads with the answer: grams of salt for a fresh batch, grams to add for a raise, or liters of RO water for a lowering. The cards break the answer down into cups, kilograms, ounces, and pounds, plus the grams per gallon. The brand table shows the same batch mixed with every other salt, so you can see what changes if you switch brands. The guidance explains the result in plain language, the warnings flag anything that needs a second look, the steps print the full working so you can check every figure, and the notes carry the safety points that apply to every batch.
The tool updates as you type, so you can try different numbers quickly. Try the example buttons under the form. The first mixes the default 5 US gallons of Instant Ocean at 35 ppt, the classic weekly water-change bucket. The second mixes 20 liters of Red Sea Coral Pro at 35 ppt, a metric batch. The third mixes 100 liters of Tropic Marin Pro-Reef at 34 ppt, a larger reef batch at the low end of the reef range. The fourth corrects a 200 liter tank from 37 ppt back to 35 ppt, the common drifted-tank case. The four examples show the four shapes the answer takes: a small imperial batch, a metric batch, a large batch, and a correction.
Two habits make the calculator's answer land on target. First, weigh the salt. Cups are approximate: one US cup of dry salt mix weighs about 280 grams, but brands range about 250 to 300 grams per cup depending on grain size and packing, so a cup measure can run about 11 percent light or 7 percent heavy. A kitchen scale costs little and removes the biggest source of error in the whole process. Second, check the finished batch with a calibrated refractometer before it goes near livestock. Calibrate with 35 ppt calibration fluid, not RO water: a refractometer zeroed on RO water can read several tenths of a ppt off at reef salinity, which is exactly the range where the answer matters.
How it works
The calculator runs four calculations in order: your salt's dose per ppt, your target in both units, the salt or water needed, and the safe schedule for the change. Each step uses the result of the one before it, and the steps section on the page prints all four so you can check them against your own arithmetic. Nothing is hidden and nothing is rounded until the end of each step, so the printed working balances exactly.
The dose table: every brand's own published figure
Salt mixes are not interchangeable by weight. Each maker publishes its own dose, and the doses differ by more than 10 percent between the lightest and the heaviest. The calculator stores each brand's published figure as an anchor: a grams-per-liter dose at a stated salinity. It then works out the dose per ppt by dividing the anchor dose by the anchor salinity, and scales that in straight proportion to your target. A brand anchored at 38.2 grams per liter at 35 ppt needs 1.0914 grams per liter for each ppt, so at 30 ppt it needs 32.7 grams per liter, and at 40 ppt it needs 43.7 grams per liter. The scaling is linear because dissolving salt is linear: twice the salt in the same water gives twice the salinity, within the range this tool covers.
The table below lists every brand in the calculator with the maker's published figure, the dose at 35 ppt that follows from it, and what a 5 US gallon batch at 35 ppt needs. All figures were checked against the makers' own published pages on 20 November 2026. The packet in your hand outranks any table, so if your packet prints a different figure, use the custom salt option and enter it.
| Salt mix | Maker's published figure | Grams per liter at 35 ppt | Grams per US gallon at 35 ppt | Grams per 5 US gallons at 35 ppt | About, in cups |
|---|---|---|---|---|---|
| Instant Ocean Sea Salt | 1.5 lb per 5 US gallons at SG 1.022 | 43.1 | 163.2 | 815.9 | 2.9 |
| Instant Ocean Reef Crystals | 1.4 lb per 5 US gallons at SG 1.021 | 42.1 | 159.4 | 797.0 | 2.8 |
| Red Sea Salt | 38.2 g per liter at 35 ppt | 38.2 | 144.6 | 723.1 | 2.6 |
| Red Sea Coral Pro Salt | 38.2 g per liter at 35 ppt | 38.2 | 144.6 | 723.1 | 2.6 |
| Tropic Marin Pro-Reef | 37 to 40 g per liter for 32 to 35 ppt | 40.0 | 151.4 | 757.2 | 2.7 |
| Tropic Marin Classic | 37 to 40 g per liter for 32 to 35 ppt | 40.0 | 151.4 | 757.2 | 2.7 |
| Aquaforest Reef Salt | 390 g per 10 liters at 33 ppt | 41.4 | 156.7 | 783.7 | 2.8 |
| Aquaforest Sea Salt | 345 g per 10 liters at 30 ppt | 40.3 | 152.6 | 762.9 | 2.7 |
Three notes on the table. First, Tropic Marin publishes a range, 37 to 40 grams per liter for 32 to 35 ppt, rather than a single figure. The calculator anchors Tropic Marin at the top of that range, 40 grams per liter at 35 ppt, because the top of the dose range matches the top of the salinity range, and a batch mixed light is easier to fix than one mixed heavy. Second, Instant Ocean publishes its dose at SG 1.022 for the Sea Salt and SG 1.021 for Reef Crystals, not at a ppt figure. The calculator converts those specific gravities to ppt with the UNESCO conversion described below, 29.2 ppt and 27.9 ppt, and anchors the dose there. Third, Red Sea Salt and Red Sea Coral Pro Salt carry the same mixing rate: Red Sea's own distributor states that both salts mix at the same rate, and the Coral Pro label table gives 38.2 grams per liter at 35 ppt. The two salts differ in what the mix contains, calcium, alkalinity, and trace elements, not in how much of it goes into the water.
The same arithmetic tells you how far a bag or bucket goes. A 50 lb bag of Instant Ocean holds 22,679.6 grams. At 815.9 grams per 5 gallon batch at 35 ppt, that is 27.8 batches, about 139 gallons of saltwater. A 22 kg bucket of Red Sea Coral Pro holds 22,000 grams. At 38.2 grams per liter at 35 ppt, that is 575.9 liters. The bucket's printed yield of 660 liters is measured at the low end of Red Sea's table, 30.6 ppt, where the dose is 33.4 grams per liter: the same bucket makes less water at reef salinity than the headline number suggests, and the difference is worth knowing before you buy. A 25 kg bucket of Tropic Marin Pro-Reef makes 625.0 liters at 35 ppt, and a 10 kg bag of Aquaforest Reef Salt makes 256.4 liters at its published 33 ppt.
Specific gravity and ppt: the UNESCO conversion
Salinity is measured two ways, and keepers switch between them constantly. Parts per thousand, ppt, is a mass ratio: grams of dissolved salt per kilogram of seawater. Natural seawater is 35 ppt. Specific gravity, SG, is a density ratio: the density of the sample divided by the density of pure water at the same temperature. Natural seawater reads SG 1.0264 at 25 °C. A refractometer usually shows both scales, but the two scales are not related by a simple constant, because the density of seawater rises slightly faster than the salt content as salinity climbs. A linear rule of thumb, such as multiplying the SG points by 1.3, lands close in the middle of the reef range and drifts at the edges.
The calculator converts between the two with the UNESCO equation of state for seawater, EOS-80, from Millero and Poisson (1981), evaluated at 25 °C (77 °F). That is the standard oceanographic formula, and it is the one that makes 35 ppt read exactly SG 1.0264. The conversion runs both ways: enter a target in ppt and the calculator shows the SG, enter it in SG and the calculator shows the ppt. The table below gives the conversion across the range that matters, all at 25 °C.
| Salinity (ppt) | Specific gravity at 25 °C | Where it sits |
|---|---|---|
| 28 | 1.0211 | Low, fish-only range |
| 30 | 1.0226 | Fish-only range |
| 32 | 1.0241 | Low reef range |
| 33 | 1.0249 | Reef range |
| 34 | 1.0256 | Reef range |
| 35 | 1.0264 | Natural seawater |
| 36 | 1.0271 | High reef range |
| 37 | 1.0279 | Above natural seawater |
| 38 | 1.0286 | Above natural seawater |
| 40 | 1.0302 | Hypersaline edge |
One convention is worth stating plainly, because it is the source of most arguments about the conversion. Specific gravity depends on temperature: the same water reads a slightly different SG at 20 °C than at 25 °C, because pure water's density changes with temperature. Some makers print their tables at 75 °F (about 24 °C) and some at 77 °F (25 °C), and a table printed at one temperature pairs 35 ppt with SG 1.025 while the UNESCO value at 25 °C is 1.0264. The difference is a convention, not an error on either side. The calculator states its convention, 25 °C, and takes every dose from the ppt column of the maker's table, which does not depend on temperature at all. If your refractometer has automatic temperature compensation, as most do, it already corrects its reading to the reference temperature, and the calculator's numbers will match it.
The fresh-mix calculation
For a fresh batch, the calculation is one multiplication. The calculator takes your salt's dose per ppt, multiplies it by your target salinity to get grams per liter, and multiplies that by your volume in liters to get the total grams. In symbols: grams = volume in liters × dose per ppt × target ppt. The dose per ppt comes from the brand table above: Instant Ocean's 1.2302 grams per liter per ppt, Red Sea's 1.0914, Tropic Marin's 1.1429, Aquaforest Reef Salt's 1.1818, Aquaforest Sea Salt's 1.1500, and Reef Crystals' 1.2026. Every other figure on the result follows from the total grams: kilograms divide by 1,000, ounces divide by 28.349523125, pounds divide by 453.59237, cups divide by 280, tablespoons divide by 17.5, and grams per gallon multiply the grams per liter by 3.785411784, the liters in a US gallon.
The calculator rounds at defined points so the printed working balances. Volumes round to two decimals, salinities in ppt to one decimal, specific gravity to four decimals, grams per liter to one decimal, and total grams to one decimal. The dose per ppt itself is never rounded: it is carried at full precision and only the printed grams per liter is rounded, so the equation in the steps, liters times grams per liter equals grams, balances to the printed tenth of a gram. If you check the working with your own arithmetic and find a tenth of a gram of difference, that is the rounding, not an error.
The correction calculation
Correction mode has three cases, decided by comparing the current salinity with the target. If the current reading is below the target, the tank needs salt. If it is above, the tank needs RO water. If the two match, nothing is needed, and the calculator says so rather than inventing a change.
Raising salinity uses the same dose arithmetic as a fresh batch, applied to the gap rather than the whole target. The salt to add is the volume in liters times the dose per ppt times the gap in ppt. A 100 liter tank at 32 ppt that needs 35 ppt has a gap of 3 ppt: with Instant Ocean at 1.2302 grams per liter per ppt, that is 3.7 grams per liter, or 370.0 grams in total. The salt must be dissolved in RO water first and added slowly to the sump. Dry salt poured into a stocked tank lands on corals and fish before it dissolves, and the local salinity spike where the crystals fall can burn tissue. The calculator's guidance says this on every raise, because it is the one mistake that does direct harm.
Lowering salinity needs no salt at all, which is why the brand does not change the answer in this case. The dissolved salt already in the tank stays where it is; the correction spreads it over more water. There are two ways to do that, and the calculator gives both. Adding RO water dilutes the tank: the volume to add is the tank volume times the gap divided by the target. A 200 liter tank at 37 ppt that needs 35 ppt takes 200 × 2 / 35 = 11.43 liters of RO water. The second way is a swap: remove some tank water and replace it with the same volume of RO water. The swap volume is the tank volume times the gap divided by the current salinity: 200 × 2 / 37 = 10.81 liters. The swap is always smaller than the top-up, because the water you remove carries salt out with it, so you need less fresh water to reach the same target. The calculator also reports how much salt the swap carries away, 491.9 grams in this example, because that is the salt you will need to replace at the next water change.
The daily limit: no more than 0.001 SG a day
Salinity changes must be slow. Fish and corals regulate their internal salt balance against the water around them, and a fast change forces that regulation to run faster than it can. The standard reef-keeping rule is no more than 0.001 SG per day, and the calculator enforces it: it divides the total SG change by 0.001 and rounds up to whole days. A change of 0.0015 SG takes 2 days, a change of 0.0023 SG takes 3 days, and a change of exactly 0.0020 SG takes exactly 2 days. The daily amount is the total divided by the days, so a 370.0 gram correction spread over 3 days is 123.3 grams a day. When the change is 0.001 SG or less, one step is enough, and the calculator says so. The daily limit applies in both directions: raising too fast and lowering too fast are both harmful, and the calculator spreads both the same way.
Cups, tablespoons, and why the scale wins
The calculator reports cups because many keepers measure with them, but it labels them approximate on every result, and the reason is worth a paragraph. A cup is a volume, and the weight of a cup of salt mix depends on the grain size, the moisture, and how firmly the cup is packed. Tropic Marin's own instructions put half a US cup at 140 to 150 grams, which is 280 to 300 grams per cup. Instant Ocean's two published instructions, by weight and by volume, imply about 250 to 272 grams per cup. Seachem's instructions imply about 257 grams per cup. The calculator uses 280 grams per cup, the middle of the published range, and one tablespoon at 17.5 grams, a sixteenth of a cup. At 280 grams per cup, the default 5 gallon batch of Instant Ocean is 2.9 cups. Measured with a brand that packs at 250 grams per cup, the same 2.9 cups would hold only 725 grams, and the batch would read about 31 ppt instead of 35. That is the whole case for the scale: a cup measure can run about 11 percent light or 7 percent heavy, and a scale cannot.
Worked example 1: the weekly bucket, 5 US gallons of Instant Ocean at 35 ppt
This is the default example and the most common real batch: a 5 gallon bucket for a weekly water change.
- Water volume: 5 US gallons = 18.93 liters
- Target salinity: 35 ppt (SG 1.0264)
- Dose: Instant Ocean Sea Salt needs 1.2302 g per liter for each ppt (1.5 lb per 5 US gallons at SG 1.022)
- Grams per liter: 1.2302 × 35 = 43.1 g per liter
- Salt needed: 18.93 liters × 43.1 g per liter = 815.9 g
- Cups: 815.9 g / 280 g per cup = about 2.9 cups
- Kilograms: 0.816 kg. Ounces: 28.78 oz. Pounds: 1.8 lb. Tablespoons: 46.6. Per gallon: 163.2 g per US gallon
With the same bucket and Red Sea Salt instead, the batch needs 723.1 grams, about 2.6 cups, because Red Sea's dose at 35 ppt is 38.2 grams per liter rather than 43.1. That 92.8 gram difference is the whole reason the calculator asks for the brand: mixing Red Sea by an Instant Ocean recipe would land the batch at about 39.5 ppt, well above the reef range.
Worked example 2: a metric batch, 20 liters of Red Sea Coral Pro at 35 ppt
- Water volume: 20 liters
- Target salinity: 35 ppt (SG 1.0264)
- Dose: Red Sea Coral Pro Salt needs 1.0914 g per liter for each ppt (38.2 g per liter at 35 ppt)
- Grams per liter: 1.0914 × 35 = 38.2 g per liter
- Salt needed: 20 liters × 38.2 g per liter = 764.0 g
- Cups: 764.0 g / 280 g per cup = about 2.7 cups
- Kilograms: 0.764 kg. Ounces: 26.95 oz. Pounds: 1.68 lb. Tablespoons: 43.7. Per gallon: 144.6 g per US gallon
Because the target matches the anchor exactly, the grams per liter equals the published dose with no scaling at all. This is the cleanest case the calculator handles, and it is the one to check first if you are verifying the tool against the packet: 20 liters at the published dose is 20 × 38.2 = 764.0 grams, no conversion and no rounding in between.
Worked example 3: raising a tank, 100 liters from 32 ppt to 35 ppt
- Water volume: 100 liters
- Current salinity: 32 ppt (SG 1.0241). Target: 35 ppt (SG 1.0264)
- Salinity to add: 35 − 32 = 3 ppt
- Dose: Instant Ocean Sea Salt needs 1.2302 g per liter for each ppt
- Salt to add: 100 liters × 3.7 g per liter = 370.0 g
- Cups: 370.0 g / 280 g per cup = about 1.3 cups
- Daily limit: no more than 0.001 SG a day. The change of 0.0023 SG takes 3 days, about 123.3 g a day
Dissolve each day's 123.3 grams in RO water before adding it, and check the reading after a few hours. The tank should read about 33 ppt after the first day, about 34 ppt after the second, and 35 ppt after the third. If a reading lands off that line, trust the refractometer over the schedule: the schedule assumes the tank holds exactly 100 liters of water, and rock and sand displace water, so a tank that measures 100 liters on the outside may hold 85 to 90 liters of water inside.
Worked example 4: lowering a tank, 200 liters from 37 ppt to 35 ppt
- Water volume: 200 liters
- Current salinity: 37 ppt (SG 1.0279). Target: 35 ppt (SG 1.0264)
- Salinity to remove: 37 − 35 = 2 ppt
- RO water to add: 200 liters × 2 / 35 = 11.43 liters. The dissolved salt stays the same, spread over more water
- Or swap: 200 liters × 2 / 37 = 10.81 liters of tank water out, the same volume of RO water in. That swap carries away 10.81 liters × 45.5 g per liter = 491.9 g of salt mix
- Daily limit: no more than 0.001 SG a day. The change of 0.0015 SG takes 2 days, about 5.72 liters of RO water a day, or a 5.41 liter swap a day
Two details matter here. First, the top-up route adds water to the tank, so it only works if the tank has room: 11.43 liters on a tank filled to the rim has nowhere to go, and the swap is the only option. Second, the current grams per liter, 45.5, is the salt concentration already in the tank, worked out from the same dose table: 1.2302 grams per liter per ppt times 37 ppt. It is the figure that turns the swap volume into the grams of salt the swap removes.
Worked example 5: the same correction in SG units, 50 US gallons from SG 1.028 to SG 1.025
- Water volume: 50 US gallons = 189.27 liters
- Current salinity: SG 1.028 = 37.1 ppt. Target: SG 1.025 = 33.2 ppt
- Salinity to remove: 37.1 − 33.2 = 3.9 ppt
- RO water to add: 189.27 liters × 3.9 / 33.2 = 22.23 liters (5.87 US gallons)
- Or swap: 189.27 liters × 3.9 / 37.1 = 19.9 liters (5.26 US gallons). That swap carries away 907.4 g of salt mix
- Daily limit: the change of 0.003 SG takes 3 days, about 7.41 liters of RO water a day, or a 6.63 liter swap a day
This example shows why the calculator converts SG to ppt before doing any arithmetic. The gap in SG units is 0.003, which looks small, but in ppt it is 3.9, a real correction on a 50 gallon tank. Doing the arithmetic in SG units directly would need the density curve at every step; converting to ppt first keeps every step linear and checkable.
Features
The calculator is built around the way saltwater keepers actually work, not around a single formula. Each feature below answers a question that comes up in real tank keeping.
Eight published brands, plus your own salt
The brand list covers the salts most keepers buy, with each dose taken from the maker's own published instructions and checked on 20 November 2026. The custom salt option covers everything else: enter the grams per liter from your packet and the salinity that figure is set at, and the calculator scales it the same way. If your packet gives the dose in cups per gallon, convert it first: a dose of half a cup per gallon at about 280 grams per cup is about 37 grams per liter. The Unit Converter handles the weight and volume conversions.
The brand comparison table
Every fresh-mix and raise result carries a table showing the same batch mixed with all eight salts. The table answers two questions at a glance: what changes if you switch brands, and whether the brand you picked is the heaviest or lightest dose. The selected brand's row is highlighted. The table uses each brand's own published dose, scaled to your target, so the numbers are directly comparable.
Correction mode with a safe schedule
Correction mode does more than work out the amount: it works out the schedule. The 0.001 SG per day limit is built in, the days are counted from your actual SG change, and the per-day amount is printed for both routes, top-up and swap, in your own unit. When the change fits in one day, the calculator says so plainly instead of inventing a schedule.
SG and ppt, both ways
Enter the target and the current reading in whichever unit your refractometer shows, and the calculator converts with the UNESCO equation of state at 25 °C. The result always shows both units, so a target entered as SG 1.0264 comes back as 35 ppt, and a target entered as 35 ppt comes back as SG 1.0264. The conversion table in the How it works section gives the full range.
Warnings that catch the expensive mistakes
The calculator warns on a target above 40 ppt, which is hypersaline, and on a target below 10 ppt, which is barely salty. In correction mode it warns on a current reading above 45 ppt, which is far past any reef tank and usually means a miscalibrated refractometer, and on a change of more than 10 ppt, which is a large correction that needs close watching. It warns when your target sits far from the salinity your salt's dose is published at, because straight proportion stretches thin at a distance. And it warns on a batch over 2,000 liters, which should be mixed in stages with each stage checked. A warning is not a refusal: the calculator still gives the answer, with the flag attached.
Printed working on every result
Every result prints its own arithmetic in the steps section: the volume conversion, the salinity in both units, the dose per ppt with the maker's figure it came from, the multiplication that gives the grams, and the daily schedule when one applies. The steps exist so you can check the answer with a pocket calculator before the salt goes in the water. If a step ever fails to balance, that is a defect, and the dose figures page linked in the sources section is the place to check the anchors.
Use cases
The weekly water change
The most common use is the weekly bucket: 5 or 10 gallons of fresh saltwater to replace what the water change removes. Enter the change volume, your brand, and 35 ppt, and the calculator gives the grams. Mix in a separate container with a pump running, let the batch clear and reach tank temperature, check it with the refractometer, and only then add it to the tank. A batch mixed the night before a water change is a batch with no surprises in it.
Setting up a new tank
A new tank needs its full volume mixed at once, and the calculator scales to it: a 200 liter setup with Red Sea Coral Pro at 35 ppt needs 7,640.0 grams, which is 7.64 kilograms, about 27.3 cups. For a large setup, mix in stages and check each stage, and remember that rock and sand displace water: a tank that measures 200 liters on the outside holds less water once it is aquascaped, so the first fill is an estimate and the refractometer reading after the first stage is the truth. Our Reef Tank Setup Cost Calculator covers the budget side of a new build, and our Aquarium Fish Compatibility Checker helps with stocking once the water is right.
Reef tanks and fish-only tanks
Reef tanks and fish-only tanks run at different targets, and the calculator handles both. A reef tank usually runs 33 to 35 ppt, where corals get the calcium and alkalinity the salt mix is designed to deliver at that salinity. A fish-only tank often runs 30 to 33 ppt, where the lower salinity is easier on the fish and cheaper on salt: a 100 liter batch at 30 ppt with Instant Ocean needs 3,690.0 grams against 4,310.0 grams at 35 ppt, a saving of 620 grams on every batch. The calculator's guidance names the range your target falls in, so a target of 30 ppt comes back with the fish-only note and a target of 36 ppt comes back with the above-natural note.
Nano tanks and small batches
Small tanks punish cup measures hardest, because a quarter-cup error is a large fraction of a small batch. A 10 liter nano water change with Instant Ocean at 35 ppt needs 431.0 grams, about 1.5 cups, and a tablespoon error either way moves the salinity by about 1.4 ppt. For batches under a liter, the calculator switches from cups to tablespoons automatically: a 0.5 liter batch needs 21.6 grams, about 1.2 tablespoons, and the steps print the tablespoon arithmetic. Weigh small batches on a gram scale. Our Aquarium Fish Food Cost Calculator covers the other small daily number in nano keeping.
A tank that drifted high
Evaporation is the usual cause of a high reading: only water evaporates, so the salt stays behind and the salinity climbs. A tank at 37 ppt that should be 35 ppt needs RO water, and the calculator's correction mode gives both routes with the daily schedule. The lasting fix is to top up evaporation with fresh RO water only, never with saltwater, and to top up often rather than in large infrequent doses. An auto top-off unit does this continuously and is the single best purchase for salinity stability.
A tank that drifted low
A low reading usually follows a large water change mixed light, a leaking container diluting the batch, or a refractometer that drifted out of calibration. The correction is salt, dissolved first in RO water and added slowly over the days the calculator counts out. Before correcting, recheck the reading with calibration fluid: correcting a tank that was never actually low is a real way to push it high.
Switching salt brands
When you switch brands, the dose changes and the batch size changes with it. The brand comparison table on every result shows the new brand's figure next to the old one, so the switch is a single lookup rather than a new calculation. Move gradually if the tank is stocked: switch the water-change batches to the new salt and let the tank's water turn over across several changes, rather than changing the whole tank at once.
Sources
Every dose figure in the calculator was checked against the maker's own published page on 20 November 2026. The figures are re-checked annually, and the next review is 19 May 2027. Where makers publish their dose in different units, the calculator converts them: pounds to grams at 453.59237 grams per pound, US gallons to liters at 3.785411784 liters per gallon, and specific gravity to ppt with the UNESCO equation of state at 25 °C.
- Instant Ocean, frequently asked questions — the maker of Instant Ocean Sea Salt and Reef Crystals. The published dose is 1.5 lb per 5 US gallons at SG 1.022 for the Sea Salt and 1.4 lb per 5 US gallons at SG 1.021 for Reef Crystals.
- Red Sea, Coral Pro Salt — the maker's page for Coral Pro Salt, with bucket yields of 22 kg to 660 liters and 7 kg to 210 liters. The label table gives 33.4, 35.8, and 38.2 grams per liter at 30.6, 32.8, and 35.0 ppt. Red Sea Salt mixes at the same rate.
- Tropic Marin, Pro-Reef — the maker's product information page. The published dose is 35 ml, about 37 to 40 grams, per liter for 32 to 35 ppt, or half a cup, about 140 to 150 grams, per US gallon. Tropic Marin Classic carries the same dosage text.
- Aquaforest, Hybrid Pro Salt — the maker's product page, giving the same dose family as the Reef Salt line.
- Aquaforest, How to set up a marine aquarium (PDF) — the maker's setup guide, giving 390 grams per 10 liters at 33 ppt for Reef Salt and 345 grams per 10 liters at 30 ppt for Sea Salt.
- Millero and Poisson (1981), the UNESCO equation of state for seawater, EOS-80 — the conversion between salinity in ppt and specific gravity at 25 °C. Natural seawater at 35 ppt reads SG 1.0264 under this equation.
Two conflicts in secondary sources were settled in favor of the makers' own figures. A hobbyist comparison table lists Red Sea Coral Pro at 40.6 grams per liter at 35 ppt, which contradicts Red Sea's own bucket yields and every other published source; the maker's 38.2 governs. The same table lists Tropic Marin Pro-Reef at 37.5 grams per liter at 35 ppt, which is below the minimum of Tropic Marin's own published range at that salinity; the maker's 37 to 40 gram range governs, anchored at 40 grams per liter at 35 ppt. A 2022 retailer article lists Aquaforest Reef Salt at 39.6 grams per liter at 35 ppt, against Aquaforest's current label figure of 390 grams per 10 liters at 33 ppt, which scales to 41.4 grams per liter at 35 ppt; the maker's current label governs.
Frequently asked questions
How much salt do I need per gallon of water?
It depends on the brand and the target salinity. At 35 ppt, natural seawater strength, Instant Ocean Sea Salt needs 163.2 grams per US gallon, Instant Ocean Reef Crystals needs 159.4 grams, Aquaforest Reef Salt needs 156.7 grams, Aquaforest Sea Salt needs 152.6 grams, Tropic Marin Pro-Reef and Tropic Marin Classic need 151.4 grams, and Red Sea Salt and Red Sea Coral Pro Salt need 144.6 grams. At 30 ppt the same brands need about a seventh less. Enter your volume, brand, and target in the calculator and it gives the exact grams, cups, and pounds for your batch.
What salinity should a reef tank run at?
Most reef tanks run 33 to 35 ppt, which is SG 1.0249 to 1.0264 at 25 °C. Natural seawater is 35 ppt, SG 1.0264, and most reef salt mixes are designed to deliver their stated calcium and alkalinity at that salinity. Fish-only tanks often run a little lower, 30 to 33 ppt. Stability matters more than the exact number: a tank held steady at 34 ppt does better than a tank swinging between 33 and 36 ppt.
How do I convert specific gravity to ppt?
Use the UNESCO equation of state for seawater at 25 °C, which is what this calculator uses. Common pairs are SG 1.0226 = 30 ppt, SG 1.0249 = 33 ppt, SG 1.0256 = 34 ppt, SG 1.0264 = 35 ppt, and SG 1.0279 = 37 ppt. A linear rule of thumb, such as multiplying the SG points by 1.3, lands close in the middle of the reef range and drifts at the edges, so the calculator uses the full equation. Enter the reading in either unit and the result shows both.
Why does the calculator ask for my salt brand?
Because the makers publish different doses, and the difference is large enough to matter. At 35 ppt, Instant Ocean Sea Salt needs 43.1 grams per liter and Red Sea Salt needs 38.2 grams per liter, a difference of about 13 percent. Mixing one brand by another brand's recipe lands the batch about 4 to 5 ppt off target. The calculator stores each brand's published dose and scales it to your target, and the result table shows all eight brands side by side so you can see the spread.
Can I measure salt in cups instead of weighing it?
You can, but weigh it when accuracy matters. One US cup of dry salt mix weighs about 280 grams, but brands range about 250 to 300 grams per cup depending on grain size and packing, so a cup measure can run about 11 percent light or 7 percent heavy. On a 5 gallon batch, measuring 2.9 cups of a salt that packs at 250 grams per cup gives 725 grams instead of 815.9, and the batch reads about 31 ppt instead of 35. A kitchen scale removes the biggest source of error in the whole process. The calculator reports cups alongside grams, and labels them approximate on every result.
My tank salinity drifted. How fast can I correct it?
No more than 0.001 SG per day. That is the standard reef-keeping rule, and the calculator builds it in: enter the current and target salinity in correction mode and it counts the days and gives the amount per day. Dissolve correction salt in RO water first and add it slowly to the sump. Never pour dry salt into a stocked tank: the crystals land on corals and fish before they dissolve. Lowering salinity needs only RO water, added slowly or swapped in over the same daily schedule.
Can I use this calculator for a freshwater tank?
No. This calculator is for marine salt mix only: mixing seawater for saltwater and reef tanks, and correcting the salinity of a saltwater tank. It does not dose salt for freshwater tanks, and it does not give salt amounts for treating fish. If you need guidance on a freshwater tank, ask a veterinarian or an experienced aquarist who can see the tank.
Why does my refractometer read differently from the calculator?
Check calibration first. Calibrate with 35 ppt calibration fluid, not RO water: a refractometer zeroed on RO water can read several tenths of a ppt off at reef salinity. Then check the temperature: the calculator converts at 25 °C, and a refractometer without temperature compensation reads differently in a cold room. Then check the salt: a damp or clumped mix weighs more per cup than a dry one, and cup measures vary by brand. Finally, check the volume: rock and sand displace water, so a tank that measures 100 liters on the outside may hold 85 to 90 liters of water. If the batch was weighed, the refractometer was calibrated with 35 ppt fluid, and the volume is right, the two should agree within a few tenths of a ppt.