Skip to content

What Size Bike Do I Need?

Reference chart: Trek Domane AL road bike sizes.

Your height
Your inseam
in

Measure barefoot with a hardcover book pressed up between your legs like a saddle, then measure from the floor to the top of the book. Measure twice and use the average.

Listed standover height of the bike you are considering (optional)
in

Find it on the bike's geometry chart, on the maker's product page, under "Standover". Enter it to check your clearance on that exact frame.

Your recommended road bike size

56 cm

This tool provides estimates for general guidance only. Frame sizes vary by brand and model, so confirm the size on the maker's chart for the exact bike before you order. Always check the manufacturer's specifications before buying.
Quick answer: For most adults, the right bike size comes from your height and inseam on the maker's chart: a rider 5 ft 8 in tall with a 31 in inseam fits a 54 cm road frame, a Medium mountain bike, or a Medium hybrid on Trek's charts. Check the standover target too: you want at least 1 in of clearance on a road or hybrid bike and at least 2 in on a mountain bike. If you fall between two sizes, your inseam usually settles it, and a test ride settles the rest.

Last reviewed: 19 November 2026. Reviewed every 180 days; next review due 18 May 2027.

How to use the Bike Size Finder

A bike that fits is a bike you ride. A frame one size too big leaves you stretched out and unable to stand over the top tube, and a frame one size too small folds you into a cramped position that hurts your knees and back. The right size comes from two body measurements, your height and your inseam, checked against the size chart the bike maker publishes. This finder does that check for you, using Trek's published charts as its reference standard, and adds a standover clearance check so you know the frame clears your legs before you buy. It takes less than a minute.

  1. Pick your bike type. Road, mountain, and hybrid bikes are sized in different systems: road bikes in centimeters, mountain and hybrid bikes in letter sizes. Pick the type you are shopping for, and the finder switches to the chart for that type.
  2. Enter your height. Use feet and inches or centimeters, whichever you know. Your height puts you in a row of the chart, and it is the first of the two measurements that matter.
  3. Enter your inseam. This is the measurement that settles most sizing arguments, because two riders at the same height can differ by 5 cm or more in leg length. Measure barefoot with a hardcover book pressed up between your legs like a saddle, then measure from the floor to the top of the book. Measure twice and use the average. If you do not know your inseam, tick the estimate box and the finder uses 46 percent of your height, the typical adult proportion, and labels the result as estimated.
  4. Add the standover height if you have it (optional). If you already have a bike in mind, find its listed standover height on the maker's geometry chart and enter it. The finder checks your clearance on that exact frame and tells you whether it passes, falls short, or is too tall to straddle.
  5. Read your result. You get a recommended frame size, the chart row it comes from, an inseam-formula cross-check, a standover target to compare against any geometry chart, and plain-language guidance, including what to do if you fall between two sizes.

This finder is one of the free tools on Tools Elite. Every size range and every formula on this page comes from a published source listed at the bottom, and the finder shows its work: the chart row, the formula result, and the standover math are all in the result. Bike sizing varies by brand and model, so treat the recommendation as a starting point and check the chart for the exact bike before you buy.

How it works

The finder works in three steps: it matches your height and inseam against a published size chart, it cross-checks the result with a published inseam formula, and it checks your standover clearance. The chart governs. The formula and the standover check are supporting evidence, and the finder says so when they disagree with the chart.

Step 1: match your height and inseam against the reference chart. The reference standard is Trek's published size charts: the Domane AL for road bikes, the Marlin for mountain bikes, and the FX for hybrid bikes. Each size on those charts covers a range of rider heights and a range of inseams. The finder starts with your height and finds the sizes whose height range covers you. When only one size covers your height, that is your size, and the finder checks whether your inseam fits that size's inseam range. When two sizes overlap at your height, as the mountain bike M and ML do between 173 and 177 cm, the finder checks your inseam against both: often only one fits, and the other is ruled out. When your inseam fits both, the finder reports both sizes and tells you how to choose between them. A few heights fall in a gap between rows, such as 154 to 155 cm on the road chart, between the 44 and 49 cm frames; the finder then shows the sizes on either side.

Step 2: cross-check with the inseam formula. Ergon, the German fit and ergonomics company, publishes inseam multipliers for each bike type: road frame size in centimeters equals inseam in centimeters times 0.665, city and trekking frame size equals inseam times 0.66, and mountain frame size in inches equals inseam in centimeters times 0.226. Ergon calls these guidelines that can vary depending on the construction of the bike frame, and the finder treats them that way: it shows the formula result next to the chart pick and says plainly when the two disagree. They often disagree by one size, and the reason is honest. The formula was calibrated on traditional level-top-tube frames, where the centimeter number was the seat tube length. Modern frames slope, and the centimeter label is now nominal: Cannondale says a 56 cm road bike today probably does not have any measurement that equals 56 cm. So the formula points at the traditional size, the chart points at the maker's size for that model, and the chart wins.

The 0.67 rule, stated carefully. You will often read that a road frame equals inseam times 0.67. That is the rounded shop version of Ergon's 0.665, and it is a rule of thumb, not a fact. Published road factors run from 0.67 to 0.70, and the spread matters: at 0.70, an 80 cm inseam gives a 56 cm frame, a full size bigger than the 54 cm that 0.67 gives. The mountain formula has the same problem in the other direction: it tends to read a size long on modern trail bikes, which pair short seat tubes with long reach. Giant's Medium Talon has a 16.9 in seat tube, under the 18.3 in the formula suggests for an 81 cm inseam. The finder uses Ergon's published 0.665, 0.66, and 0.226, shows the result, and never lets the formula overrule the chart.

Step 3: check standover clearance. Standover height is the height of the top tube where you straddle it, and clearance is the gap between your body and the tube. The finder gives you a standover target: the highest listed standover height to look for on a geometry chart, worked out as your inseam minus the recommended clearance. The clearance minimums come from REI and Cannondale. For road bikes, REI wants about 1 in of clearance on a level top tube and 2 in or more on a sloping one, and Cannondale gives a 1 to 2 in range (2.5 to 5 cm). For mountain bikes, REI wants a 2 in minimum, and notes that aggressive riders often seek 3 to 5 in. For hybrid bikes, REI says a city commuter follows the road guidelines. The finder uses 1 in for road and hybrid and 2 in for mountain, and if you enter a listed standover height it subtracts it from your inseam and reports the clearance with a pass, short, or too-tall verdict. REI's own examples show the check in action: with a 30 in inseam, you want a road bike with about a 29 in standover height, and a mountain bike with about a 28 in standover height.

When your inseam is estimated. If you leave the inseam blank, the finder estimates it at 46 percent of your height. That is the midpoint of the typical adult proportion of 45.5 to 46.5 percent, and it is close enough to place most riders in the right row of the chart. It is not a substitute for measuring: your own inseam can sit well off the average, and the finder flags every estimated result so you know to measure before you buy.

Worked example, road bike. Take a rider 5 ft 9 in tall (175 cm) with a 32 in inseam (81 cm). On the Trek Domane AL chart, 175 cm is inside only the 56 cm row, which covers 174 to 180 cm, and the 81 cm inseam is inside its 81 to 85 cm range, so the pick is 56 cm. The Ergon formula gives 81 times 0.665, which is 53.9 cm, nearest standard size 54 cm. The formula and the chart disagree by one size, and the finder says so and keeps the chart pick. The standover target is 81 minus 2.5, which is 78.5 cm, or 30.9 in: look for a frame with a listed standover height at or below that number.

Worked example, mountain bike between sizes. Take the same height, 175 cm, with an 82 cm inseam, shopping for a mountain bike. On the Trek Marlin chart, 175 cm is inside both the M row (165 to 177 cm) and the ML row (173 to 180 cm), and the 82 cm inseam fits both (M 79 to 83 cm, ML 81 to 86 cm), so the rider is between sizes. The finder reports M and ML, and its guidance follows REI: err on the smaller side for mountain bikes, because more sizing adjustments can be made with a smaller frame than with one that is too large. The Ergon formula gives 82 times 0.226, which is 18.5 in, exactly the ML frame size, so the formula leans the other way, and the honest answer is to test-ride both. The standover target is 82 minus 5, which is 77 cm, or 30.3 in.

Worked example, standover check. Take a rider 180 cm tall with an 84 cm inseam, considering a mountain bike whose geometry chart lists a 79 cm standover height. The finder first sizes the rider: 180 cm is inside both ML (173 to 180 cm) and L (177 to 188 cm), and the 84 cm inseam fits both, so the rider is between ML and L. Then it checks standover: 84 minus 79 is 5 cm of clearance, which is 2.0 in, exactly at the 2 in mountain minimum, so the verdict is pass. If the same rider considered a frame with an 82 cm standover height, the clearance would be 2 cm, under the 5 cm minimum, and the finder would call it short and suggest the next size down.

What your result means

The recommended size is the size to try first. For road bikes it is a centimeter number, such as 56 cm. For mountain and hybrid bikes it is a letter, such as M or ML, and for mountain bikes the finder also shows the frame size in inches from the Marlin chart, such as 17.5 in for a Medium. The result names the chart row it comes from, so you can check it: the height range and the inseam range for that size, next to your own measurements.

Between sizes means two sizes both fit your height and inseam, and the chart cannot separate them. This is common: the charts overlap on purpose, because arm length, torso length, and flexibility also decide fit. For mountain bikes, REI advises erring on the smaller side, because a smaller frame leaves more room for adjustment. For road and hybrid bikes, Cannondale's guidance applies: a long torso or long arms point to the larger size, because its longer top tube accommodates them, while a short torso or limited flexibility points to the smaller one, because its shorter reach keeps you from stretching out. A smaller frame can take a longer stem; a frame that is too big cannot be shortened. If the standover check fails on the larger size, go down a size regardless of the other factors.

The formula cross-check shows what Ergon's inseam multiplier gives for your legs, and the nearest standard size to that figure. When it matches the chart pick, the two methods agree and you can buy with confidence. When it disagrees by a size, the finder keeps the chart pick and explains why: the formula is a rule of thumb from level-top-tube frames, and the chart is the maker's own sizing for the bike you are buying. A disagreement is information, not an error, and it is most common for riders whose inseam sits near the edge of a size's range.

The standover target is the highest listed standover height to look for on a geometry chart: your inseam minus the recommended clearance. Use it when you shop online, where you cannot stand over the bike. Find the Standover line in the geometry section of the maker's product page, compare it with the target, and shortlist the frames that sit at or below it. Cannondale's own method is the same: measure your inseam, subtract 1 to 2 in, and pick the size whose listed standover is closest to that number. Remember that standover is one check among several: REI warns that a sloping top tube changes the clearance a great deal, so standover alone cannot confirm fit, and reach matters as much once clearance is safe.

The standover verdict appears only when you enter a listed standover height. Pass means the clearance meets the minimum for your bike type. Short means the frame clears your legs but by less than the minimum, and the finder suggests the next size down. Too tall means the standover height is above your inseam, so you cannot straddle the frame at all, and you need a smaller size. Step-through frames are the exception: with no top tube to straddle, the standover check does not apply, and saddle height and reach decide fit instead.

If the bike is for a camping tour, the frame is only half the kit. Once the size is settled, our tent size finder works out how much tent you need for the trip, and our backpack capacity planner sizes the pack for the gear you will carry. Touring loads change how a bike handles, so a test ride with the bags on is worth more than any chart.

Bike sizes explained

The three tables below are the reference charts the finder uses: Trek's published size charts for the Domane AL road bike, the Marlin mountain bike, and the FX hybrid. Find your height in the left column, read across to your bike type, and check your inseam against the same row. The tables are the starting point, not the last word: other brands size differently, and even Trek's own models differ, as the notes below the tables explain.

Road bike sizes (Trek Domane AL)

Frame sizeRider heightInseam
44 cm150 to 153 cm (4 ft 11 in to 5 ft 0 in)71 to 73 cm (28 to 29 in)
49 cm156 to 163 cm (5 ft 1 in to 5 ft 4 in)74 to 77 cm (29 to 30 in)
52 cm163 to 168 cm (5 ft 4 in to 5 ft 6 in)76 to 79 cm (30 to 31 in)
54 cm168 to 174 cm (5 ft 6 in to 5 ft 9 in)78 to 82 cm (31 to 32 in)
56 cm174 to 180 cm (5 ft 9 in to 5 ft 11 in)81 to 85 cm (32 to 33 in)
58 cm180 to 185 cm (5 ft 11 in to 6 ft 1 in)84 to 87 cm (33 to 34 in)
61 cm185 to 191 cm (6 ft 1 in to 6 ft 3 in)86 to 90 cm (34 to 35 in)

Note the gap between the 44 and 49 cm rows: heights of 154 to 155 cm fall between them, and the finder reports both sizes for those riders. Road sizes are centimeter labels, and on modern compact frames the number is nominal rather than a measurement, as the section below explains.

Mountain bike sizes (Trek Marlin)

SizeFrameRider heightInseam
XS14.5 in145 to 155 cm (4 ft 9 in to 5 ft 1 in)69 to 73 cm (27 to 29 in)
S15.5 in155 to 165 cm (5 ft 1 in to 5 ft 5 in)74 to 78 cm (29 to 31 in)
M17.5 in165 to 177 cm (5 ft 5 in to 5 ft 10 in)79 to 83 cm (31 to 33 in)
ML18.5 in173 to 180 cm (5 ft 8 in to 5 ft 11 in)81 to 86 cm (32 to 34 in)
L19.5 in177 to 188 cm (5 ft 10 in to 6 ft 2 in)84 to 89 cm (33 to 35 in)
XL21.5 in188 to 195 cm (6 ft 2 in to 6 ft 5 in)89 to 91 cm (35 to 36 in)
2XL23 in195 to 203 cm (6 ft 5 in to 6 ft 8 in)91 to 97 cm (36 to 38 in)

The ML size is a half-step between Medium and Large, for riders who feel cramped on a Medium but do not want the standover or wheelbase of a Large. The XS and S Marlin use 27.5 in wheels; the larger sizes use 29 in wheels. The rows overlap on purpose: a rider at 175 cm sits in both M and ML, and at 177 cm sits in M, ML, and L at once, which is why the finder uses inseam to separate them.

Hybrid bike sizes (Trek FX)

SizeRider heightInseam
XS147 to 155 cm (4 ft 10 in to 5 ft 1 in)69 to 73 cm (27 to 29 in)
S155 to 165 cm (5 ft 1 in to 5 ft 5 in)72 to 78 cm (28 to 31 in)
M165 to 175 cm (5 ft 5 in to 5 ft 9 in)77 to 83 cm (30 to 33 in)
L175 to 186 cm (5 ft 9 in to 6 ft 1 in)82 to 88 cm (32 to 35 in)
XL186 to 197 cm (6 ft 1 in to 6 ft 6 in)87 to 93 cm (34 to 37 in)
2XL197 to 203 cm (6 ft 6 in to 6 ft 8 in)92 to 95 cm (36 to 37 in)

Hybrid sizing is more forgiving than road sizing, because the riding position is more upright and the fit is less sensitive to a centimeter here or there. The FX chart has no ML half-step, so a rider at 175 cm sits on the line between M and L, and the inseam decides: 81 cm fits M (77 to 83 cm) but falls below L (82 to 88 cm), so the pick is M.

Other brands size differently, and the differences are real. Specialized's Tarmac road chart uses the same centimeter labels but different height ranges: its 54 covers 170 to 175 cm against Trek's 168 to 174 cm, its 56 covers 175 to 180 cm against Trek's 174 to 180 cm, and its 61 covers 188 to 196 cm against Trek's 185 to 191 cm. A rider at 186 cm is a 61 on Trek's chart and a 58 on Specialized's. Giant skips centimeter labels on road bikes entirely and uses letters: its Medium road frame covers 171 to 180 cm, and Giant publishes height only, no inseam, so the standover check does more work on a Giant. Trek's own models disagree with each other: the Domane AL runs 44 to 61 cm, while the Domane SLR runs an XS to XL ladder with 47, 50, 52 to 54, 56, and 60 to 62 cm frames, and Trek says it has recently moved its road sizing from numbers to letters. Specialized goes further on its trail bikes with S-Sizing, S1 to S6, which is based on reach and riding style rather than inseam: the ranges overlap so widely that a rider at 173 cm sits inside three S sizes at once, and Specialized says to pick the smaller one for a livelier feel and the larger one for stability at speed. The lesson is the same in every case: match by height range on the chart for the exact model, never by label alone.

The size label is not a measurement. Road centimeter numbers started as seat tube lengths on level steel frames, but modern compact frames slope, and the number is now an approximate label. Cannondale says a 56 cm road bike today probably does not have any measurement that equals 56 cm. The same holds for mountain bikes: Trek calls its Medium Marlin a 17.5 in frame, while the seat tube on its geometry chart is 42 cm, about 16.5 in. That is why the finder sizes you by your height and inseam on the maker's chart, and why the geometry numbers that carry over between brands are reach and standover, not the label on the frame.

Gender does not change the chart. Trek says the right size depends mainly on your height and inseam, whatever your gender, and that gender matters far less than other factors in finding the right bike. REI notes that many brands, including Cannondale and Co-op Cycles, have moved away from women-specific bikes in favor of gender-neutral sizing designed to fit a broader range of body types. Use the same chart and the same measurements, and let height and inseam decide.

Common mistakes to avoid

Sizing by height alone. Height puts you in a row of the chart, but inseam picks the size, because two riders at 5 ft 10 in can differ by 5 cm or more in leg length. A rider with long legs for their height may need the next size up on standover, and a rider with short legs may need the size down. The finder flags it when your inseam sits outside the range your size assumes, which is the first sign that height alone has misled you.

Guessing your inseam instead of measuring it. The book method takes two minutes and a hardcover book, and every published measurement guide prescribes it: REI, Ergon, and Cannondale all describe the same steps, standing against a wall with a book pressed up between your legs like a saddle. Trouser sizes and guesses run short, and a short inseam pushes the finder toward a smaller frame than you need. Measure twice and use the average.

Measuring in the wrong shoes. The published methods disagree here, and the difference is worth knowing. REI measures inseam in bike shoes, because shoes add to leg length. Ergon measures barefoot, and Trek's method is barefoot too. The gap is about a centimeter, which is enough to move a rider across a size boundary. The finder uses the barefoot book-method inseam, matching Ergon and Trek. If you measured in shoes, subtract about a centimeter before you enter the number, or measure again barefoot.

Trusting the centimeter label as a measurement. A 56 cm frame is not 56 cm of anything on a modern compact road bike, and a 17.5 in mountain frame does not have a 17.5 in seat tube. The label tells you which traditional size the frame matches, nothing more. Comparing a 54 from one brand with a 54 from another by label alone is the fastest way to buy the wrong size: compare the height ranges on each maker's chart instead.

Treating standover as the whole fit. Standover clearance is a safety check, not a fit guarantee. REI warns that the slope of the top tube changes clearance a great deal, so a sloping frame can pass the standover check at almost any size, and reach is often the more important number on a road bike. Once clearance is safe, check the effective top tube length and reach on the geometry chart, and sit on the bike: your elbows should bend a little with your hands on the hoods or grips, and if you have to lock your arms to reach the bars, try the smaller size.

Sizing up on a mountain bike when you fall between sizes. The bigger frame feels roomier in the shop, but on the trail it is harder to throw around, harder to dismount from in a hurry, and harder to fix with parts. REI advises erring on the smaller side for mountain bikes, because more sizing adjustments can be made with a smaller frame than with one that is too large. A longer stem and a raised saddle can stretch a small frame; nothing shortens a frame that is too big.

Buying a bike to grow into. This mistake is most common with kids, and REI names it directly: it is tempting to buy a bike a child will grow into, but a bike that fits well matters more, so the child can ride comfortably and confidently while learning. The same logic holds for adults returning to cycling after time away: buy the size that fits how you ride now, not the size you hope to ride later. A professional fit can adjust the position as you get stronger and more flexible.

Skipping the maker's chart for the exact model. Size charts differ between brands, between models from the same brand, and sometimes between generations of the same model. Trek's Domane AL and Domane SLR use different size ladders, and Specialized's Tarmac and Diverge differ too. The finder uses one published chart per bike type as its reference standard, which is the right starting point, but the chart for the exact bike you buy is the one that decides. Check it before you order, and check the geometry chart's standover line at the same time.

Frequently asked questions

What size bike do I need for my height?

For a rider 5 ft 9 in tall (175 cm), Trek's charts point to a 56 cm road frame, a Medium or ML mountain bike, and a Medium hybrid. For a rider 5 ft 6 in tall (168 cm), the same charts point to a 54 cm road frame, a Medium mountain bike, and a Medium hybrid. Height alone only gets you to a row of the chart, though: your inseam picks the size when two sizes overlap at your height, so measure your inseam with the book method and enter both numbers in the finder above for a recommendation matched to your legs as well as your height.

How do I measure my inseam for a bike?

Stand barefoot with your back against a wall, feet about 8 to 10 in apart, and press a hardcover book up between your legs like a saddle, spine up. Have a helper mark the wall at the top edge of the book, then measure from the mark to the floor. That is your cycling inseam. Measure twice and use the average. REI describes the same method in bike shoes, while Ergon and Trek measure barefoot, so be consistent: the finder expects a barefoot measurement, and a shoe measurement runs about a centimeter longer.

What is the inseam times 0.67 rule for road bikes?

It is a rule of thumb that says your road frame size in centimeters equals your inseam in centimeters times 0.67. Ergon publishes a slightly different factor, 0.665, and published road factors run from 0.67 to 0.70, so the rule is approximate by nature: at 0.70, an 80 cm inseam gives a 56 cm frame, a full size bigger than the 54 cm that 0.67 gives. Use the formula as a cross-check, not a verdict. The maker's size chart for the exact bike governs, because modern compact frames slope and the centimeter label is nominal rather than a measurement.

How much standover clearance do I need?

On a road or hybrid bike, aim for 1 to 2 in (2.5 to 5 cm) of clearance between your body and the top tube: REI wants about 1 in on a level top tube and 2 in or more on a sloping one, and Cannondale gives the same 1 to 2 in range. On a mountain bike, REI wants a 2 in minimum, and notes that aggressive riders often seek 3 to 5 in. You can check it from a geometry chart before you see the bike: subtract the listed standover height from your inseam. With a 30 in inseam, REI's examples pair a 29 in standover height on a road bike and a 28 in standover height on a mountain bike.

What should I do if I am between two bike sizes?

Check your inseam against both sizes first: often only one fits it, and the finder does this check for you. If both still fit, test-ride both if you can. For mountain bikes, REI advises erring on the smaller side, because more sizing adjustments can be made with a smaller frame than with one that is too large. For road and hybrid bikes, Cannondale's guidance applies: a long torso or long arms point to the larger size, and a short torso or limited flexibility point to the smaller one. If the standover check fails on the larger size, go down a size regardless.

Are bike sizes the same across brands?

No. A medium from one brand can fit a different height range from another, and even one brand's models differ. Specialized's Tarmac 54 covers riders 170 to 175 cm tall, while Trek's Domane AL 54 covers 168 to 174 cm, and a rider at 186 cm is a 61 on Trek's chart but a 58 on Specialized's. Giant uses letter sizes on road bikes instead of centimeters, and publishes height only, no inseam. Specialized's trail bikes use S-Sizing, S1 to S6, based on reach and riding style, with ranges so wide that a rider at 173 cm sits inside three sizes at once. Always match by height range on the chart for the exact model, never by label alone.

Do women need a different bike size than men?

Not by default. Trek says the right size depends mainly on your height and inseam, whatever your gender, and that gender matters far less than other factors in finding the right bike. REI notes that many brands, including Cannondale and Co-op Cycles, have moved away from women-specific bikes in favor of gender-neutral sizing designed to fit a broader range of body types. Use the same chart and the same measurements, and let height and inseam decide. Women-specific frames still exist, usually with narrower handlebars and shorter reach, and they suit some riders, but they are an option, not a requirement.

Sources

Every figure on this page comes from one of the sources below, accessed 19 November 2026. The size recommendations are the finder's own arithmetic from those figures, shown in full in the How it works section.

  • Trek, Road bike sizing guide — fit depends primarily on height and inseam, whatever your gender; Trek has moved road sizing from numbers to letters. trekbikes.com
  • Reviews by People, "How to Choose a Bike Size: Chart and Calculator by Height" — full Trek size charts for the Domane AL road bike, Marlin mountain bike, and FX hybrid, with rider height and inseam ranges for every size; reviewed 15 November 2026. reviewsbypeople.com
  • BikeSizeGuide, Trek Bike Size Chart — corroborates the Marlin and FX height and inseam ranges; shows the Domane SLR ladder differs from the Domane AL (47, 50, 52 to 54, 56, 60 to 62 cm). bikesizeguide.com
  • REI, Bike Fitting: How to Fit a Bike — road standover about 1 in on a level top tube, 2 in or more on a sloping one; mountain 2 in minimum; hybrid city commuter follows the road guidelines; 30 in inseam pairs with a 29 in road standover height; standover alone cannot confirm fit. rei.com
  • REI, Mountain Bike Sizing and Fit Guide — between sizes, err on the smaller side; mountain standover 2 in minimum, aggressive riders 3 to 5 in; 30 in inseam pairs with a 28 in mountain standover height. rei.com
  • Ergon, "Calculate the optimal frame size" — city and trekking frame equals inseam times 0.66, road frame equals inseam times 0.665, mountain frame in inches equals inseam in centimeters times 0.226; the factors are guidelines that vary with frame construction. ergonbike.com
  • Cannondale, "What Size Road Bike Do I Need?" — road standover clearance 1 to 2 in (2.5 to 5 cm); a 56 cm road bike probably does not have any measurement that equals 56 cm; long torso points to the larger size, short torso to the smaller; test-ride both sizes when between them. cannondale.com
  • Icebike, "Bike Size Chart by Height and Inseam" — published road factors run 0.67 to 0.70; the mountain formula reads a size long on modern trail bikes (Giant Medium Talon seat tube 16.9 in against 18.3 in from the formula for an 81 cm inseam); typical inseam is 45.5 to 46.5 percent of height; Giant Medium geometry across bike types. icebike.org
  • BikeSizeGuide, Specialized Bike Size Chart — Tarmac road sizes 44 to 61 cm with height ranges; Stumpjumper S-Sizing S1 to S6 with wide overlapping ranges; Specialized publishes no rider inseam. bikesizeguide.com
  • BikeSize, Giant Bike Size Chart — Giant letter sizes for road bikes, Medium covering 171 to 180 cm; Giant publishes height only, no inseam. bike-size.com
  • Bodycalculator, Bike Size Calculator — Ergon multipliers restated; Trek road sizes; Gazelle uses 0.68 for its city bikes. bodycalculator.com