Skip to content

Coffee to Water Ratio Calculator

Brew method
How much do you want to brew?
cups

One cup is 8 fl oz (237 ml) of water. Coffee maker carafe cups are often 5 or 6 oz, so check yours.

Strength
Show coffee in

Grams are more accurate. Tablespoons use about 5 g per level tablespoon, an approximation that varies by grind and roast.

Coffee you need

59.3 g

Tablespoon figures use about 5 g per level tablespoon of ground coffee. A real spoonful runs from about 4 g for a coarse grind to about 7 g for a fine grind, so weigh your coffee when repeatable results matter.

This tool provides estimates for general guidance only. Tablespoon figures use about 5 grams per level tablespoon of ground coffee, an approximation that varies by grind and roast, so weigh your coffee when precision matters. Always check the manufacturer's specifications before buying.

Quick answer: For most brewers, the standard coffee to water ratio is 1:16, which means 1 gram of coffee for every 16 grams (milliliters) of water, or about 15 grams of coffee per 8 oz mug. The Specialty Coffee Association's golden ratio is 55 grams of coffee per liter of water, about 1:18, and most home brewers land between 1:15 and 1:18. Espresso is different: it uses a 1:2 ratio of ground coffee to liquid in the cup, usually 18 grams in and 36 grams out.

Last reviewed: 19 November 2026. Reviewed every 180 days; next review due 18 May 2027.

How to use the Coffee Ratio Calculator

Most bad home coffee is not a bean problem. It is a ratio problem: too little coffee for the water, or too much, brewed the same way every morning out of habit. A scoop per cup sounds precise until you learn that a scoop of coarse grounds weighs far less than a scoop of fine ones, and that your coffee maker's "cup" is probably not an 8 oz cup at all. This calculator removes the guesswork. It works out exactly how much coffee and water you need for six brew methods, from the Specialty Coffee Association's published golden ratio and the standard starting ratio for each method, and it gives you the answer in grams or tablespoons, with a per-cup breakdown.

  1. Pick your brew method. Drip, pour over, French press, espresso, cold brew, or AeroPress. Each method has its own standard ratio, because the contact time, grind, and pressure are different, so the method is the first thing the calculator asks for.
  2. Enter how much you want to brew. Use cups, or switch to water volume and enter milliliters or fluid ounces. One cup means 8 fl oz (237 ml) of water. For espresso, cups mean shots: one shot uses an 18 g dose in a double basket, and the volume option means the yield you want in the cup.
  3. Pick your strength. Mild, standard, or strong. Standard is the published starting ratio for the method. Mild moves one step lighter and strong moves one step heavier, inside the range the published guides give for that method.
  4. Pick grams or tablespoons. Grams are more accurate and are what every published ratio is written in. Tablespoons are there for mornings without a scale, and they use about 5 g per level tablespoon of ground coffee, an approximation the results page states openly.
  5. Read your result. You get the coffee you need in grams and tablespoons, the water in milliliters and fluid ounces, the ratio used, and a per-cup breakdown, plus plain-language guidance for your method. Cold brew also shows how many diluted servings the batch makes.

This calculator is one of the free tools on Tools Elite. Every ratio on the page comes from a published source, listed in the Sources section below, and the arithmetic is shown in full in the How it works section so you can check it with a pocket calculator. If you are setting up the kitchen around the coffee, our stand mixer size finder sizes the mixer for the same counter, and our cookware set finder works out the pots and pans. Cold brew fans should also check the fridge space: a liter of concentrate lives in the fridge for up to two weeks, and our fridge capacity planner checks whether your refrigerator has room for it.

How it works

A coffee ratio is written as 1:N, where 1 is one part coffee and N is N parts water, both by weight. A 1:16 ratio means 1 gram of coffee for every 16 grams of water. Water weighs 1 gram per milliliter, so grams of water and milliliters of water are the same number, which is what makes the arithmetic simple: coffee in grams equals water in milliliters divided by the ratio number. A 1:16 ratio with 500 ml of water needs 500 divided by 16, which is 31.25 grams of coffee. The smaller the second number, the stronger the cup: 1:12 is stronger than 1:18, because the same water carries more coffee.

The golden ratio. The Specialty Coffee Association, the professional body for the specialty coffee industry, publishes a Golden Cup standard of 55 grams of coffee per liter of water, plus or minus 10 percent. That works out to a ratio of about 1:18 by weight (55 grams per liter is exactly 1:18.18, and 1:18 is the rounded shorthand every guide uses). The standard also sets a water temperature of 200°F plus or minus 5°F (93°C plus or minus 3°C), an extraction yield of 18 to 22 percent of the coffee's mass dissolved, and a brew strength of 1.15 to 1.35 percent total dissolved solids. Most published guidance for drip and pour over sits inside a 1:15 to 1:18 band, and most home brewers land in the middle of it. This calculator uses that band for drip and pour over: mild is 1:18, the golden ratio itself, standard is 1:16, and strong is 1:15.

Method ratios. The other methods have their own published starting points, because they brew differently. French press is an immersion brewer, the grounds sit in the water for the whole brew, so it starts stronger at 1:15, with a published range from 1:12 to 1:17. Espresso is measured dose to yield, not dose to water: the standard starting point is 1:2, or 18 grams of coffee in and 36 grams of liquid espresso out, in 25 to 30 seconds. Cold brew concentrate starts at 1:4, steeped 12 to 18 hours and diluted about 1:1 before drinking. AeroPress starts at 1:15 for a normal mug, 16 grams of coffee to 240 grams of water, while the maker's own recipe is stronger at about 1:13. The full table, with every method's mild, standard, and strong ratio, is in the Coffee ratios by brew method section below.

The formulas, in plain text. Water in milliliters equals cups times 237, because one cup is 8 fl oz, which is 237 ml. Water in fluid ounces equals milliliters divided by 29.5735, the number of milliliters in one US fluid ounce. Coffee in grams equals water in milliliters divided by the ratio number. Tablespoons equal grams divided by 5, because one level tablespoon of medium-ground coffee weighs about 5 grams. For espresso, the coffee is shots times 18 grams, and the yield in milliliters equals coffee in grams times the ratio number. For cold brew, diluted servings equal water in milliliters divided by 237, times 2, because the concentrate is diluted 1:1. All results are rounded to one decimal place, and tablespoons are computed from the rounded gram figure so the two always agree.

Worked example, drip. Take 4 cups of drip coffee at standard strength. Water is 4 times 237, which is 948 ml, or 4 times 8, which is 32 fl oz. The standard drip ratio is 1:16, so the coffee is 948 divided by 16, which is 59.25 grams, rounded to 59.3 grams. Tablespoons are 59.3 divided by 5, which is 11.86, rounded to 11.9, or about 12 level tablespoons. Per cup, the coffee is 237 divided by 16, which is 14.8125 grams, rounded to 14.8 grams, or about 3 tablespoons. At the milder 1:18 golden ratio, the same 4 cups need 948 divided by 18, which is 52.7 grams, and at the stronger 1:15 they need 948 divided by 15, which is 63.2 grams. The difference between mild and strong for a whole pot is about 10 grams, or two tablespoons.

Worked example, espresso. Take 2 shots at standard strength. The dose is 2 times 18 grams, which is 36 grams of coffee. The standard espresso ratio is 1:2, so the yield is 36 times 2, which is 72 ml of espresso in the cup, or 72 divided by 29.5735, which is 2.4 fl oz. Per shot, that is 18 grams in and 36 ml out. If you want a shorter, stronger shot, the 1:1.5 ratio gives 36 times 1.5, which is 54 ml from the same 36 grams; for a longer, lighter shot, 1:2.5 gives 36 times 2.5, which is 90 ml. The dose never changes in these examples, only the yield, which is how baristas tune a shot: the dose is set by the basket, and the yield is the adjustment.

Worked example, cold brew. Take 1 liter of water for cold brew concentrate at standard strength. The ratio is 1:4, so the coffee is 1000 divided by 4, which is 250 grams. That is the recipe the concentrate guides give: 250 grams of coarse coffee to 1 liter of cold water, steeped 12 to 18 hours. Diluted 1:1, the batch makes 1000 divided by 237, times 2, which is 8.4 servings of 8 oz. The grounds hold back some water, roughly twice their weight, so the strained concentrate comes out a little under a liter; the calculator reports the water you pour in, and the content below explains the difference.

A note on 55 grams per liter. The exact SCA figure and the rounded 1:18 shorthand differ slightly: 55 grams per liter gives 13.0 grams of coffee for a 237 ml mug, while 1:18 gives 13.2 grams. The difference is 0.2 grams, well inside the SCA's own plus or minus 10 percent band, and far smaller than the error in any spoon measurement. The calculator uses the rounded ratios, because they are what every published guide quotes, and this page says so rather than pretending the two figures are identical.

What your result means

The coffee you need is the headline number, shown in the unit you picked, grams or tablespoons, with the other unit on the line below. Grams are the accurate figure: every published ratio is written in grams, and a kitchen scale that reads to 1 gram is the single cheapest upgrade to home coffee. Tablespoons are a convenience for mornings without a scale. They use about 5 grams per level tablespoon of medium-ground coffee, and the results page carries a standing note that a real spoonful runs from about 4 grams for a coarse grind to about 7 grams for a fine grind. If the tablespoon figure and the gram figure ever seem to disagree, trust the grams.

The water line gives the water in milliliters and fluid ounces. For drip, pour over, French press, cold brew, and AeroPress, this is the water you pour in. For espresso, the line reads "espresso out (yield)" instead, because espresso is measured by the liquid in the cup, not the water in the tank. The yield is given in milliliters and fluid ounces, but you should weigh it in grams on a scale under the cup: crema makes the volume hard to read, and grams are exact.

The ratio used line names the ratio the calculator applied, for example 1:16, with a plain-language reading: 1 gram of coffee for every 16 grams of water. It changes with your method and your strength choice. If the cup comes out weaker or stronger than you wanted, this is the number to remember, because it is the number you change next time: move one step on the strength control, or note the ratio and adjust it by hand.

The per-cup breakdown gives the same figures for a single serving: grams and tablespoons of coffee with 237 ml (8 fl oz) of water. It is the line to use when you brew one mug at a time, and it is the easiest way to sanity-check the result against what you already do. If you have always used two tablespoons per mug and the calculator says three, the per-cup line shows you exactly where the difference comes from. For espresso, the per-cup line is a per-shot line: 18 grams of coffee and the yield for one shot.

The diluted servings line appears only for cold brew. It tells you how many 8 oz servings the batch makes once diluted 1:1 with water or milk. A 4-cup batch of concentrate makes about 8 servings. Remember that the grounds keep some water, so the strained concentrate is a little less than the water you poured in, and the serving count is approximate. The concentrate keeps refrigerated for up to two weeks, so a big batch is a reasonable way to cover a week of iced coffee.

The guidance line under the results is method-specific brewing advice in one or two sentences: water temperature, grind, steep time, and the one thing people most often get wrong with that method. It is guidance, not a recipe, and it never overrides the numbers above it. If the guidance and your brewer's manual disagree, follow the manual: some machines have their own temperature and timing built in.

Coffee ratios by brew method

The table below shows the standard starting ratio for each method, with the mild and strong steps the calculator uses, the grind, and the key timing. Every figure comes from the sources listed at the bottom of this page. The ranges in the notes column are the published ranges, not the calculator's invention: where guides disagree, the table says so, and the paragraphs below the table explain the disagreements.

MethodStandard ratioMildStrongGrindTiming
Drip1:161:181:15Medium4 to 6 minutes
Pour over1:161:181:15Medium-fine2:30 to 4:00
French press1:151:171:12Coarse4 minutes
Espresso1:21:2.51:1.5Very fine25 to 30 seconds
Cold brew concentrate1:41:51:3.5Coarse12 to 18 hours
AeroPress1:151:171:13Medium-fineAbout 1 to 3 minutes

Drip. The standard drip ratio is 1:16, inside the SCA golden band of 1:15 to 1:18 and the drip range of 1:16 to 1:18 that the method guides give. A medium grind and a contact time of 4 to 6 minutes are the SCA figures for drip. The golden ratio itself, 1:18, is the mild step, and 1:15 is the strong step. If your machine is SCA certified, it is tested to hit the temperature and contact-time windows; an ordinary home machine varies, which is one reason the same ratio can taste different on two machines.

Pour over. Pour over shares the drip ratios, 1:16 standard with 1:18 mild and 1:15 strong, and the published pour-over range is 1:15 to 1:17. The difference from drip is control: you pour the water yourself, so the brew time depends on your pouring, and the guides aim for 2:30 to 4:00 total. A medium-fine grind, finer than drip, is the usual starting point. Start with a short bloom, pouring just enough water to wet the grounds and waiting briefly, then pour the rest in stages.

French press. The standard French press ratio is 1:15, about 67 grams of coffee per liter, and it is the figure nearly every French press guide gives as its starting point. The published range runs from 1:12 for a strong cup to 1:17 for a lighter one, and this calculator uses those as its strong and mild steps. The grind is coarse, like sea salt, and the steep is 4 minutes. Because there is no paper filter, more oils and fine particles reach the cup, which is why French press tastes fuller bodied than drip at the same ratio, and why it suits a slightly stronger starting point.

Espresso. Espresso is a different discipline: the ratio is dose to yield, coffee in against liquid out, and the standard starting point is 1:2, or 18 grams in and 36 grams out in 25 to 30 seconds. The strength steps run in the opposite direction from the other methods: a longer shot is milder, so mild is 1:2.5 (a lungo, about 45 grams out from an 18 gram dose) and strong is 1:1.5 (a ristretto, about 27 grams out). The dose is set by the basket size and then left alone; the yield is the adjustment. Always weigh the yield, because crema makes the volume unreliable.

Cold brew. Cold brew concentrate starts at 1:4, or 250 grams of coffee per liter of water, steeped 12 to 18 hours and diluted about 1:1 before drinking. The published concentrate window runs from 1:3 to 1:5, and this calculator uses 1:5 for mild and 1:3.5 for strong. Guides disagree about the edges: some give 1:5 to 1:8 for concentrate, which overlaps the ready-to-drink ratio of about 1:8, the ratio for cold brew you drink straight without diluting. The disagreement is really about where concentrate ends and ready-to-drink begins. This calculator treats 1:4 as concentrate and says so, and the diluted-servings line makes the dilution explicit rather than leaving it to guesswork.

AeroPress. AeroPress is the method the guides disagree about most, because the device was designed around a strong shot that you dilute, and the community has stretched it in every direction since. The maker's own recipe is one heaping scoop, 16 to 18 grams, with water to the 4 mark, about 220 grams, which works out to about 1:13, and this calculator uses 1:13 as its strong step. The community starting point for a normal mug is 1:15, 16 grams to 240 grams of water, which is the calculator's standard step, and the mild step is 1:17. James Hoffmann's well-known technique goes lighter still, 11 grams to 200 grams, or 1:18, for a filter-style cup. The grind is medium-fine and the water is cooler than for pour over, around 185°F (85°C).

Common mistakes to avoid

Trusting the carafe cups. This is the most common home-brewing error, and it is built into the machine. A US measuring cup holds 8 fl oz, but most coffee makers mark their carafes in 5 oz or 6 oz cups. A 12-cup maker holds about 60 to 72 oz of water, not 96 oz. If you dose 12 mugs' worth of coffee into it, the pot comes out far too strong; if you dose by the carafe marks and wonder why it tastes weak, the same arithmetic explains it in reverse. Check yours once: fill the carafe to the 4-cup mark, pour the water into a measuring jug, and divide by 4. Write the answer under the machine and never think about it again.

Measuring by scoops only. A tablespoon measures volume, not weight, and ground coffee does not fill a spoon evenly. A level tablespoon of medium-ground coffee weighs about 5 grams, but the real figure runs from about 4 grams for a coarse grind to about 7 grams for a fine grind, and dark roasts weigh less than light roasts at the same volume. Two tablespoons can mean 8 grams or 14 grams depending on the grind, which is the difference between a weak cup and a strong one. Spoons are fine for a rough morning cup; a scale is what makes a recipe repeatable.

Using one ratio for every method. A 1:16 ratio is right for drip and pour over, but it is far too weak for espresso, where the standard is 1:2, and far too weak for cold brew concentrate, where the standard is 1:4. The methods differ in contact time, pressure, and grind, so they need different ratios, and the ratio that makes a good drip pot makes a watery French press and an undrinkable espresso. Pick the method first, then the ratio. That is why the calculator asks for the method before anything else.

Drinking cold brew concentrate straight. Concentrate is brewed at 1:4 specifically so you can dilute it, and it is roughly twice the strength of a normal cup. Drunk undiluted over ice it tastes harsh and heavy, and it carries about twice the caffeine of the diluted serving. The standard dilution is 1:1 with water or milk, and some guides go to 1:2 for a lighter cup. If you want cold brew you can pour straight from the jar, brew it at about 1:8 instead and skip the dilution step entirely.

Changing two things at once. When a cup tastes off, change one variable and brew again. If it tastes sour, the usual fix is a finer grind or hotter water, which increases extraction; if it tastes bitter, the usual fix is a coarser grind or cooler water. Changing the ratio and the grind in the same brew tells you nothing about which one fixed it, and you end up chasing the cup from one morning to the next. Keep notes for a week: method, ratio, grind, and one line on the taste. Patterns show up fast.

Forgetting the water the grounds keep. Grounds absorb water, roughly twice their weight in a long steep, so the pot yields less than the water you poured in. A French press brewed with 500 ml of water yields noticeably less than 500 ml of coffee, and a cold brew batch of 800 ml of water yields about 600 to 650 ml of concentrate. The calculator reports the water you pour in, because that is what the ratio is calculated on, but if you need a full liter of finished cold brew, brew with more water than a liter and plan for the loss.

Using boiling water for everything. The SCA golden standard sets water at 200°F plus or minus 5°F (93°C plus or minus 3°C) at contact, just off the boil, and AeroPress goes cooler still at about 185°F (85°C). Water straight off a rolling boil is 212°F, which scorches the grounds and pushes the cup toward bitterness, especially with lighter roasts. Let the kettle stand a short while after the boil, or use a kettle with temperature control. For cold brew the point is moot: the water is cold by design, and the long steep does the work the heat would have done.

Frequently asked questions

What is the golden ratio for coffee?

The Specialty Coffee Association's golden ratio is 55 grams of coffee per liter of water, plus or minus 10 percent, which works out to about 1:18 by weight. That means about 13 grams of coffee for an 8 oz mug. Most home brewers find their sweet spot between 1:15 and 1:18, with 1:16 the most common starting point for drip and pour over. The golden ratio is a starting point for calibration, not a rule, so adjust it to your taste and your beans.

How much coffee do I need for 4 cups?

For 4 cups of drip coffee at the standard 1:16 ratio, you need 59 grams of coffee, about 12 level tablespoons, with 948 ml (32 fl oz) of water. At the milder SCA golden ratio of 1:18, the same 4 cups need 53 grams, about 11 tablespoons. These figures assume 8 oz measuring cups; if your coffee maker's carafe cups are 5 or 6 oz, use the water volume option in the calculator instead.

How many tablespoons of coffee per cup?

About 3 level tablespoons per 8 oz mug at the standard 1:16 ratio, which works out to about 15 grams of coffee. At the SCA golden ratio of 1:18, one mug needs about 13 grams, which is 2.6 tablespoons. Tablespoons are approximate: one level tablespoon holds about 5 grams of medium-ground coffee, but the real weight runs from about 4 grams for a coarse grind to about 7 grams for a fine grind, so weigh your coffee when repeatable results matter.

What is the best ratio for French press?

Start at 1:15, which is 1 gram of coffee for every 15 grams of water, or about 67 grams of coffee per liter. For a 1-liter press that means about 67 grams, and for a single 350 ml mug about 23 grams. The published range for French press runs from 1:12 for a strong cup to 1:17 for a lighter one, so move inside that range to taste. Use a coarse grind and steep for 4 minutes before pressing.

What ratio should I use for cold brew?

For cold brew concentrate, start at 1:4, which is 1 gram of coffee for every 4 grams of water, or 250 grams of coffee per liter of water. Steep coarse grounds for 12 to 18 hours, strain, and dilute about 1:1 with water or milk before drinking. If you want cold brew you can drink straight from the jar, brew at about 1:8 instead, which is the ready-to-drink ratio. Do not drink the concentrate undiluted: it is roughly twice the strength of a normal cup.

What is the espresso ratio?

The standard espresso ratio is 1:2 by weight, which means 1 gram of ground coffee for every 2 grams of liquid espresso in the cup. A double shot starts at 18 grams in and 36 grams out, in about 25 to 30 seconds. For a shorter, stronger shot, stop at 1:1.5, about 27 grams out; for a longer, lighter shot, run it to 1:2.5, about 45 grams out. Espresso is measured dose to yield, not dose to water, so always weigh the liquid in the cup.

Why does my 12-cup coffee maker hold less than 12 cups?

Because a coffee maker's cup is not a measuring cup. A US measuring cup holds 8 fl oz, but most coffee makers mark their carafes in 5 oz or 6 oz cups, so a 12-cup maker holds about 60 to 72 oz of water, not 96 oz. If you dose 12 mugs' worth of coffee into it, the pot comes out far too strong. Check yours once: fill the carafe to the 4-cup mark, pour the water into a measuring jug, and divide by 4 to find your maker's cup size.

Sources

Every figure on this page comes from one of the sources below, accessed 19 November 2026. The ratios are the guides' ratios; the arithmetic is the calculator's own, shown in full in the How it works section.

  • CoffeeLabAdvisor, "How Much Coffee Grounds Per Cup? Ratio Calculator and Chart" — SCA Golden Cup 55 g per liter, plus or minus 10 percent, about 1:18; water 200°F plus or minus 5°F; extraction 18 to 22 percent; TDS 1.15 to 1.35 percent; drip 1:16 to 1:18; pour over 1:15 to 1:17; French press 1:12 to 1:15; AeroPress 1:12 to 1:16; cold brew concentrate 1:5 to 1:8; espresso 1:2, 18 g in and 36 g out; 1 level tablespoon about 5 g; 1 fl oz 29.57 ml; carafe cups 5 or 6 oz. coffeelabadvisor.com
  • Roastopedia, "The Coffee Golden Ratio Rule" — SCA Golden Cup 55 g per liter (1:18.2), ratio 1:16 to 1:18, TDS 1.15 to 1.35 percent, extraction yield 18 to 22 percent. roastopedia.com
  • Senya Wakopi, "Coffee to Water Ratio by Cups, With the Cup Size Sorted Out" — SCA 55 g per liter, plus or minus 10 percent, about 1:18, with 1:16.5 to 1:20 inside the range; about 13 g per 8 oz mug; water 93°C plus or minus 3°C. blog.senyawakopi.com
  • Little Coffee Place, "French Press Coffee Ratio, Grind Size and Water Temperature" — French press 1:15, about 65 g per liter, coarse grind, 4 minutes, 200°F water. littlecoffeeplace.com
  • Crosby Coffee, "French Press Coffee Ratio by Cafetière Size" — French press 1:15, about 67 g per liter, range 1:12 to 1:17, coarse grind, 4 minutes. crosbycoffee.live
  • Dialed In Barista, "How to Dial In Espresso" — espresso 1:2 starting point, 18 g in and 36 g out, 25 to 30 seconds; shorter around 1:1.5, longer around 1:2.5. dialedinbarista.com
  • Calculators.coffee, "Espresso Extraction Calculator" — 1:2 the modern specialty baseline; ristretto 1:1 to 1:1.5; lungo 1:2.5 to 1:3; dose 18 g, yield 36 g. calculators.coffee
  • Coffee Roast Co, "How to Make Cold Brew Concentrate at Home" — cold brew concentrate 1:4, 250 g coffee to 1 liter water, 1:3 to 1:5 window, steep 16 to 24 hours, dilute 1:2, keeps refrigerated up to two weeks. coffeeroastco.com
  • Best Coffee Guide, "Cold Brew Coffee Concentrate: Recipe, Ratios and Tips" — 1:4 the sweet spot for concentrate, 1:5 medium concentrate, 1:8 ready-to-drink, dilute 1:1. bestcoffeeguide.com
  • CoffeeHow, "How to Make AeroPress Coffee" — official AeroPress recipe 17 g coffee to about 220 g water at 85°C, about 1:13; Hoffmann technique 11 g to 200 g, 1:18. coffeehow.co
  • KnowSips, "How to Make AeroPress Coffee: A Repeatable Method" — AeroPress starting recipe 16 g coffee to 240 g water, about 1:15, medium-fine grind, 85°C water. knowsips.com
  • Coffee Brew Guide, "How Much Coffee per Cup?" — 1 level tablespoon of ground coffee about 5 g; a level tablespoon can weigh from about 4 g to 7 g by grind; 15 g per 8 oz cup, about 3 level tablespoons. coffeebrewguide.com
  • CoffeeBrewHub, "Cold Brew Coffee Ratio: The Exact Formula for a Perfect Concentrate" — 1:4 concentrate, 200 g coffee to 800 g water; grounds absorb roughly twice their weight in water; 800 g water yields about 600 to 650 ml of concentrate; dilute 1:1. coffeebrewhub.com
  • Calculator Cloud, "Liquid Measurements Converter" — 1 US cup equals 8 fl oz equals 236.588 ml, about 237 ml; 1 fl oz equals 29.5735 ml. calculator-cloud.com