Skip to content

Mealworm Farm Calculator

Chickens get a feeding check against the Wormera guide of 10 to 15 mealworms a day.

Whole number, 1 to 50.

Whole number, 1 to 210. A leopard gecko eats roughly 10 to 20 a week; a chicken at the Wormera guide eats 70 to 105 a week.

Feeding from day one needs a buffer of 8 weeks of feeding on top of the breeding core.

50 to 95. The Wormera optimum is 70 to 85. Below 65 growth slows dramatically.

Share of the starter left to pupate into breeding beetles. Wormera says about 5%, Bug Breeding says 10 to 20%.

Share of hatched worms that reach feed size. No guide publishes this figure, so it is your planning guess: 10 to 90.

Enter a date as YYYY-MM-DD, such as 2026-11-20, to turn the week counts into calendar dates. Leave it blank for weeks only.

Your mealworm farm

How the numbers were worked out

      This tool sizes a home mealworm farm from the numbers you enter, for general guidance only. Yields are planning estimates, not promises: real output varies with temperature, density, and handling. Mealworms are a treat for chickens, not a feed, and feeding rules for farmed poultry vary by country. Check local rules before feeding home-raised mealworms to a commercial flock.
      Start with 500 to 1,000 mealworms for a standard home colony, per Bug Breeding, and expect your first harvest of starter stock in 6 to 8 weeks, with the first home-bred generation in 8 to 12 weeks. If you feed your animals from day one, add 8 weeks of feeding on top of the breeding core. Enter your animal count, weekly feeding rate, room temperature, and start mode above for your starter size, bin count, timeline, and monthly yield.

      Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

      How to use the Mealworm Farm Calculator

      A mealworm farm is a colony of darkling beetle larvae, Tenebrio molitor, raised at home to feed reptiles, chickens, birds, and fish. It is the standard do-it-yourself feeder insect project: a few plastic bins, some wheat bran, a slice of carrot, and a starter batch of worms. The hard part is not the setup, it is the sizing. Buy too few worms and the colony takes four months or more to ramp up while you keep buying feeders anyway. Start with one bin when your flock needs five, and the colony stalls from overcrowding before it ever pays for itself.

      This calculator sizes the farm from the one number you actually know: how many worms your animals eat in a week. Enter who eats the worms, how many animals you feed, and how many worms each one eats in a week, and it works out your starter colony size, your bins now and once established, your first-harvest date, and your monthly yield at steady state. It also prices the starter colony and checks chicken feeding against the published daily guide.

      The calculator is built on the published breeder guides, and it is honest about where those guides disagree. Starter-size advice conflicts sharply: one guide says 150 worms is enough, another recommends 500 to 1,000, and a third says you need 2,000 to 5,000 if you plan to feed your animals from day one. This tool presents them as tiers and sizes your starter from your weekly need and your start mode instead of blending them into one number. The same applies to the first harvest: starter stock grows to feed size in about 6 to 8 weeks, while the first home-bred generation takes 8 to 12 weeks, and the calculator shows both windows rather than picking one.

      To get your result, follow these steps:

      1. Pick who eats the mealworms. Choose reptiles, chickens, both, or other animals. The choice changes the feeding check: chickens get checked against the Wormera guide of 10 to 15 mealworms a day for an adult bird, because mealworms are a treat for chickens, not a feed. Reptiles get no such check, because feeding rates vary so much by species and age that no single daily guide applies.
      2. Enter how many animals you feed. Count every animal that eats mealworms from this farm. The count runs from 1 to 50, and it is what scales the weekly need.
      3. Enter how many worms each animal eats in a week. This is the single most important number in the whole calculation, because your weekly need is the animal count times this figure, and everything else scales from the weekly need. A leopard gecko eats roughly 10 to 20 a week, and a chicken at the Wormera guide eats 70 to 105 a week. An adult bearded dragon gets mealworms only as an occasional treat, 5 to 10 once or twice a week. If you are not sure, count what you actually feed for a week first. Enter a whole number from 1 to 210, which is 30 a day.
      4. Pick a start mode. Patient means you wait for the colony to grow before feeding from it: you keep buying feeders for the first couple of months while the starter stock pupates and breeds. Feed now means you feed your animals from the starter stock while the colony grows, which needs a buffer of 8 weeks of feeding on top of the breeding core. The two modes can differ by thousands of worms for a large flock.
      5. Enter your room temperature in degrees F. Temperature controls the speed of the whole life cycle, so it sets your timeline. The Wormera optimum is 70 to 85 degrees F. Bug Breeding puts the ideal band at 70 to 80 degrees F and says growth slows dramatically below 65 degrees F, while above 85 degrees F the worms can become stressed or die. The default is 75 degrees F.
      6. Enter your breeder reserve. This is the share of the starter colony you leave untouched so it can pupate into breeding beetles. Wormera says to allow about 5 percent of your large worms to pupate, while Bug Breeding says to leave 10 to 20 percent of your largest larvae untouched. The default is 10 percent. The colony is self-sustaining only with about 50 breeding beetles or more, per Bug Breeding, and the calculator warns you when your reserve leaves you short of that line.
      7. Enter the share reaching harvest size. Not every egg becomes a feed-size worm: some eggs fail, some larvae die, and some get eaten by their bin mates. No breeder guide publishes a survival figure, so this is your planning guess, from 10 to 90 percent, with a 50 percent default. The yield range moves directly with this number, so if you are unsure, try 30 percent and see whether the farm still covers your need.
      8. Enter a start date if you want calendar dates. Type a date as YYYY-MM-DD, such as 2026-11-20, and the timeline table turns the week counts into calendar dates. Leave it blank and the timeline stays in weeks.

      The tool updates as you type, so you can try different numbers quickly. Try the example buttons under the form: the defaults show 2 reptiles eating 20 worms a week each on a patient start, which needs a 500-worm starter in 1 bin; the second is 8 chickens eating 70 worms a week each and feeding from day one, which needs a 5,980-worm starter in 2 bins; and the third is a single gecko eating 10 worms a week in a cool room at 65 degrees, which still needs the 500-worm breeding core but on the slower timeline.

      Read the full result, not just the headline. The headline leads with your starter colony size, the cards show your bins, beetles, need, yield, and cost, and the timeline table shows the three milestones in weeks or, with a start date, in calendar dates. The guidance explains the result, the warnings flag weak assumptions, the steps print the full working, and the notes record the source disagreements behind the numbers.

      How it works

      The calculator runs six calculations in order: your weekly and monthly need, your breeding core, your feeding buffer, your starter colony, your breeding beetles, and your monthly yield. The steps section on the page prints all six so you can check them against your own arithmetic.

      Step 1: your weekly and monthly need

      Your weekly need is your animal count times the worms each animal eats in a week. Your monthly need is the weekly need times 52 weeks a year divided by 12 months, rounded to the nearest whole worm. A month is about 4.33 weeks, so the monthly need is always a little more than four times the weekly need. Two reptiles at 20 worms a week each need 40 worms a week, and 40 times 52 divided by 12 is about 173 worms a month. Eight chickens at 70 worms a week each need 560 worms a week, and 560 times 52 divided by 12 is about 2,427 worms a month.

      The monthly need also sets your kit tier, from the Wormera kit table, the only published table that ties monthly output to flock size. The Small kit yields 250 or more worms a month, the Medium 500 or more, and the Large 1,000 or more. A monthly need of 250 or less fits Small, 251 to 500 fits Medium, 501 to 1,000 fits Large, and anything above 1,000 is beyond Large, where the breeding core starts scaling up.

      Step 2: your breeding core

      The breeding core is the part of the starter colony you never feed to your animals: the worms that pupate, become beetles, and lay the eggs that keep the farm going. The core is 500 worms for any farm whose monthly need fits within the Wormera Large tier, and it scales up by 500 worms for each further 1,000 worms a month of need. A farm needing 173 worms a month has a core of 500 worms. A farm needing 2,427 worms a month has a core of 1,500 worms, because 2,427 divided by 1,000 rounds up to 3, and 3 times 500 is 1,500. The 500-worm unit comes from Bug Breeding, which recommends a 500 to 1,000 worm starter: at the default 10 percent reserve, a 500-worm core produces exactly 50 breeding beetles, the self-sustaining line.

      Step 3: your feeding buffer

      On a patient start there is no feeding buffer: you keep buying feeders while the colony grows, so the starter is the breeding core alone. On a feed-now start the buffer is 8 weeks of feeding at your weekly need, because the first home-bred generation takes 8 to 12 weeks to arrive, and the starter stock has to feed your animals until then. Eight chickens at 560 worms a week need a buffer of 560 times 8, which is 4,480 worms, and the starter is 5,980 worms with the 1,500-worm breeding core. When the starter passes 10,000 worms the calculator says so plainly: buy it in two batches a week apart, as Bug Breeding suggests.

      Step 4: your starter colony and breeding beetles

      Your starter colony is the breeding core plus the feeding buffer. Your breeding beetles are the starter times your breeder reserve percent, rounded to the nearest whole beetle. A 500-worm starter at a 10 percent reserve gives 50 beetles. A 5,980-worm starter at 10 percent gives 598 beetles. The 50-beetle line is the self-sustaining threshold from Bug Breeding: once you have 50 or more beetles laying eggs, the colony replaces what you harvest. Below that line the colony still grows, but slowly, and the calculator warns you to raise the reserve or start with more worms. At a 5 percent reserve, a 500-worm starter gives only 25 beetles, which is below the line.

      Step 5: your bins

      You start in 1 bin when the starter is 1,000 worms or fewer, and 2 bins when it is larger. The established farm runs 3 bins for a Small-tier need, 4 bins for a Medium or Large need, and 5 bins beyond the Large tier, following the Wormera separation approach, which uses five containers, one for each stage: eggs and micro worms, small and medium worms, large worms, pupae, and beetles. Bug Breeding gives the same shape in round numbers: start with 1 to 2 bins, and once established most people run 3 to 5 bins, with one for larvae, one for pupae and beetles, and extras for scaling production. Bin size is 10 quart for a starter of 1,000 worms or fewer and 20 quart above that, inside the Bug Breeding range of 10 to 20 quart clear plastic storage bins.

      Step 6: your monthly yield

      Your monthly yield is a range, worked out from the egg math with your survival guess. Each beetle is female about half the time, each female lays 250 to 500 eggs over about 2.5 laying months, and the share you entered reaches harvest size. The low end uses 250 eggs per female, the high end uses 500. With 50 breeding beetles and 50 percent survival, the low end is 50 times 50 percent females times 250 eggs divided by 2.5 months times 50 percent, which is 1,250 worms a month, and the high end is 50 times 50 percent times 500 divided by 2.5 times 50 percent, which is 2,500 worms a month. The calculator compares the low end against your monthly need, and names the shortfall when it falls short.

      The survival share is the least certain number in the whole calculation, and the only one no guide publishes. The range is a planning figure, not a promise: a colony that is too cold, too crowded, or too wet will produce far less than the range suggests.

      Worked example: 2 reptiles, patient start

      Two reptiles eating 20 worms a week each, on a patient start, at 75 degrees F, with a 10 percent breeder reserve and 50 percent survival. Weekly need: 2 times 20 equals 40 worms a week. Monthly need: 40 times 52 divided by 12 is about 173 worms a month, which fits the Wormera Small tier. Breeding core: 500 times 1 equals 500 worms. Feeding buffer: none, because the start is patient. Starter colony: 500 plus 0 equals 500 worms. Breeding beetles: 500 times 10 percent is about 50 beetles, exactly on the self-sustaining line. Bins: 1 bin of 10 quart to start, growing to 3 bins. Timeline at 75 degrees: first harvest of starter stock in 6 to 8 weeks, first home-bred worms in 8 to 12 weeks, self-sustaining in about 10 weeks. Monthly yield: about 1,250 to 2,500 worms a month, against a need of 173, so the low end covers the need many times over. Starter cost at the Bug Breeding 2026 price of $12 to $25 per 1,000 worms: $6.00 to $12.50.

      Worked example: 8 chickens, feed from day one

      Eight chickens eating 70 worms a week each, feeding from day one, at 75 degrees F, with a 10 percent breeder reserve and 50 percent survival. Weekly need: 8 times 70 equals 560 worms a week. Monthly need: 560 times 52 divided by 12 is about 2,427 worms a month, which is above the Wormera Large tier. Breeding core: 500 times 3 equals 1,500 worms. Feeding buffer: 560 times 8 weeks equals 4,480 worms. Starter colony: 1,500 plus 4,480 equals 5,980 worms. Breeding beetles: 5,980 times 10 percent is about 598 beetles, well above the self-sustaining line. Bins: 2 bins of 20 quart to start, growing to 5 bins. Timeline at 75 degrees: first harvest of starter stock in 6 to 8 weeks, first home-bred worms in 8 to 12 weeks, self-sustaining in about 10 weeks. Monthly yield: about 14,950 to 29,900 worms a month, against a need of 2,427, so the low end covers the need. Feeding check: 70 worms a week is 10 worms a bird a day, which stays within the Wormera guide of 10 to 15 mealworms a day. Starter cost: $71.76 to $149.50.

      Worked example: 1 gecko, cool room

      One gecko eating 10 worms a week, on a patient start, at 65 degrees F, with a 10 percent breeder reserve and 50 percent survival. Weekly need: 1 times 10 equals 10 worms a week. Monthly need: 10 times 52 divided by 12 is about 43 worms a month, which fits the Wormera Small tier. Breeding core: 500 times 1 equals 500 worms. Starter colony: 500 worms. Breeding beetles: 50, on the self-sustaining line. Bins: 1 bin of 10 quart to start, growing to 3 bins. Timeline at 65 degrees, in the cool band: first harvest of starter stock in 8 to 10 weeks, first home-bred worms in 10 to 14 weeks, self-sustaining in about 12 weeks. Monthly yield: about 1,250 to 2,500 worms a month, against a need of 43. Starter cost: $6.00 to $12.50. The lesson of this example is that the breeding core does not shrink with a small appetite: even one gecko needs the 500-worm core to reach 50 beetles, and the surplus yield is the price of a self-sustaining colony.

      What size starter colony do you need

      Ask five breeder guides how many mealworms you need to start a colony and you will get five answers, from 100 to 5,000. They are not all wrong: they describe different situations, and the right starter depends on whether you feed your animals from the starter stock, how many animals you feed, and how long you are willing to wait. The table below lays the published figures out as tiers, with the situation each one fits.

      Starter sizeSourceSituation it fits
      100 to 200 wormsReptile KnowledgePatient start, no feeding from the starter, small appetite
      150 worms minimumExotic Nutrition, wikiHowSmallest start anyone allows; slow ramp-up, months of waiting
      500 to 1,000 wormsBug BreedingStandard start; harvest in 6 to 8 weeks, self-sustaining in about 10 weeks
      1,000 worms plus 50 beetlesBackyard Chickens starter setStarter set with laying beetles included, in two 6 quart containers
      2,000 to 5,000 wormswikiHow, Reptile KnowledgeFeeding from day one, or a large appetite that depletes the starter fast
      10,000 extra wormsWormeraMore than 25 chickens: 5,000 large plus 5,000 small or medium, 500 left to pupate

      The calculator's starter is built from the Bug Breeding 500 to 1,000 range as the breeding core, plus an 8-week feeding buffer when you feed from day one. That construction reproduces the published tiers without blending them: a patient reptile keeper gets 500 worms, which is the bottom of the Bug Breeding range; a chicken keeper feeding 8 birds from day one gets 5,980 worms, which sits in the wikiHow 5,000 range for feeding right away; and a keeper with more than 25 chickens gets a starter in five figures, which is the Wormera scale-up territory. If your result looks large, check the start mode first: switching from feed now to patient can cut the starter by thousands, at the cost of buying feeders for two more months.

      One warning from Bug Breeding is worth repeating: buying only 200 to 300 worms is the common beginner mistake, and a colony started that small takes 4 or more months to ramp up. At a 10 percent reserve, 250 worms give 25 beetles, half the self-sustaining line, so the first home-bred generation is half the size it would be, and the second generation inherits the shortfall. Starting with 500 worms costs about $6 to $12.50 at 2026 breeder prices, and it buys the 50-beetle threshold from the start.

      Buy from a reputable breeder, not from the wild: Bug Breeding warns that wild insects can carry parasites or diseases that wipe out the whole colony. Buy medium to large larvae, about 1 to 1.5 centimeters long, so they are close to pupating and close to feed size at the same time. Avoid giant mealworms and superworms for a breeding colony: they are a different species, Zophobas morio, and some are treated with an insect growth hormone that makes them sterile. Expect to pay $12 to $25 for 1,000 worms at 2026 prices, and remove any dead or very sluggish worms on arrival.

      How many bins, and what size

      A mealworm farm runs on shallow plastic bins with smooth walls, because worms and beetles cannot climb smooth plastic. Bug Breeding recommends 10 to 20 quart clear plastic storage bins with tight-fitting lids, with 20 to 30 small ventilation holes of one eighth of an inch punched in each lid. Clear bins matter for a beginner farm: you can see the depth of the bedding and the frass without opening the bin. Wormera adds that a lid with holes is preferred, though the beetles do not fly, so a lid is not strictly required.

      There are two ways to run the bins, and the calculator plans for the separation approach, because it produces more worms and makes harvesting easier. In the combination approach, all life stages live together in one container, which works well for smaller farms where only a few worms are removed for feeding as needed. In the separation approach, each stage gets its own container, and worms are moved between bins as they grow and change. Wormera says the separation approach needs five containers and more maintenance, but improves production and makes harvesting easier. It also protects the pupae, which cannot defend themselves: larvae and beetles eat pupae left in the grow-out tray, so moving pupae out as soon as you see them is the single most important habit in breeding.

      Substrate is both bedding and food. Wormera recommends wheat bran at a depth of 1 to 2 inches and warns against rolled oats, whose coarse texture makes sifting harder and which is more likely to mold or develop grain mites. Bug Breeding uses 3 to 4 inches of wheat bran, rolled oats, or chicken feed, with 4 to 6 egg cartons or toilet paper rolls standing vertically for climbing and pupation sites. The depth disagreement is real, and the calculator does not pretend otherwise: either depth works if the bran stays dry and the moisture food is replaced before it molds. What matters more than depth is dryness. Never add water directly to the bin: worms get all their moisture from 2 to 3 slices of carrot, potato, or apple, replaced every 3 to 4 days, or only enough that the worms finish it in 1 to 2 days, per Wormera. Wet substrate grows mold and grain mites, and both can ruin a colony faster than any other mistake.

      Maintenance is light but regular. Check every 2 to 3 days: replace the vegetable slices, remove any moldy bits, and stir the bran gently so air circulates. Sift out the frass, the fine dark waste pellets, every 4 to 6 weeks, and add fresh bran. The frass is valuable garden fertilizer. Empty the bin completely every 3 to 4 months, wash it with hot soapy water, dry it thoroughly, and start fresh. If you want to put the frass to work in a garden bed, size a compost bin for household scraps and garden waste first.

      The first-harvest timeline

      The first harvest is the most misunderstood number in mealworm farming, because the phrase means two different things, and guides use it both ways. The starter stock you buy is already part grown: medium to large larvae, 1 to 1.5 centimeters long, which reach feed size in about 6 to 8 weeks. That is the Bug Breeding step-one figure. The first home-bred generation is different: eggs laid by your beetles, hatched, and grown to feed size, which takes 8 to 12 weeks from the start, per the Bug Breeding FAQ. A full breeding cycle, from egg to adult beetle to new eggs, takes about 3 months. The calculator shows both windows, plus the self-sustaining date.

      Temperature sets the pace of every stage. The table below gives the calculator's timeline bands, built from the published figures: the Wormera optimum of 70 to 85 degrees F, the Bug Breeding ideal of 70 to 80 degrees F, the warning that growth slows dramatically below 65 degrees F, and the Wormera larval range of 3 to 6 months in cooler conditions.

      Room temperatureBandFirst harvestFirst home-bred wormsSelf-sustaining
      Below 65 degrees FCold10 to 14 weeks14 to 20 weeksAbout 16 weeks
      65 to 69 degrees FCool8 to 10 weeks10 to 14 weeksAbout 12 weeks
      70 to 85 degrees FIdeal6 to 8 weeks8 to 12 weeksAbout 10 weeks
      Above 85 degrees FHot6 to 8 weeks8 to 12 weeksAbout 10 weeks

      The hot band keeps the warm-room timeline but carries a warning, because above 85 degrees F the worms can become stressed or die, and a stressed colony does not hit its timeline or its yield. The cold band is where most disappointed beginners live: a colony in a 60 degree room follows the Wormera larval range of 3 to 6 months rather than the Bug Breeding 8 to 10 weeks. A small heating mat under one corner of the bin in winter is the standard fix.

      The stage timings explain what you will see in the bins. Eggs hatch in 7 to 14 days per Bug Breeding, or 4 to 19 days per Wormera, depending on temperature. The larval stage lasts 8 to 10 weeks in a fast warm colony, per Bug Breeding, and 3 to 6 months in Wormera's broader range, which covers cooler rooms. The pupa lasts 1 to 3 weeks and does not eat or move. The adult beetle lives 2 to 3 months, starts laying within days to about 2 weeks of emerging, and lays 300 to 500 eggs in her lifetime per Bug Breeding, or roughly 250 to 500 per the mass-rearing review. At 75 degrees F the full life cycle is 10 to 12 weeks. If you want to time each stage from a start date, our Insect Life Cycle Calculator gives stage-by-stage dates for mealworms and other rearing species.

      Monthly yield: what a colony produces

      A colony's monthly yield comes from its beetles. Each female lays hundreds of eggs, and the eggs become the next generation of worms, so the yield scales with the beetle count and with the share of hatched worms that survives to feed size. The calculator's yield range is built from that egg math, with the published figures in the open: half the beetles are female, each female lays 250 to 500 eggs over about 2.5 laying months, and your entered survival share reaches harvest size. The low end uses 250 eggs, the high end uses 500, so the high end is always exactly twice the low end.

      The published yield claims give a useful cross-check. Bug Breeding says a full colony can produce 5,000 or more worms per month indefinitely, once 50 or more beetles are laying eggs. The Wormera kit table gives 250 or more a month for the Small kit, 500 or more for Medium, and 1,000 or more for Large. The calculator's range for a 50-beetle colony at 50 percent survival is 1,250 to 2,500 worms a month, which sits between the Wormera Large kit and the Bug Breeding full-colony claim. A colony with 598 beetles, like the 8-chicken example, yields 14,950 to 29,900 a month at 50 percent survival, far above its need of 2,427.

      Three things move the yield more than any other: temperature, density, and stage separation. A warm room near 75 degrees F keeps every stage on the fast timeline, while a cold room stretches the larval stage from weeks to months. Overcrowding lowers egg output: the mass-rearing review gives an optimum of about 8.4 adults per square decimeter, roughly 50 beetles in a 30 by 20 centimeter tray. Stage separation protects the pupae from cannibalism. Get those three right and the yield range is realistic; get any of them wrong and the low end is optimistic.

      The calculator judges the farm by the low end of the yield range, not the high end, because planning on the high end is how colonies fall short. If the low end covers your monthly need, the farm is sized right, and the surplus gives you room for a cold week, a mold outbreak, or a batch of eggs that fails. If the low end falls short, the calculator names the shortfall and suggests the two fixes that work: a second starter batch, which adds beetles directly, or a higher breeder reserve, which turns more of the starter into beetles. Raising the survival guess to close a shortfall is not a fix: it changes the arithmetic without changing the colony.

      Feeding chickens versus reptiles

      Mealworms play different roles for chickens and reptiles, and the feeding rules are different too. For reptiles, mealworms are a staple feeder for leopard geckos and a treat for bearded dragons. Geckos eat them as part of a varied diet, while adult bearded dragons should get only 5 to 10 as an occasional treat once or twice a week, per The Bug Shed, because the hard chitin shell raises impaction risk and the calcium-to-phosphorus ratio is poor. Never feed mealworms to a baby bearded dragon: The Bug Shed recommends waiting until the subadult stage, typically around 5 to 18 months old. Bug Breeding recommends gut-loading the worms for 24 to 48 hours before feeding, and dusting with calcium powder, because mealworms alone are high in phosphorus relative to calcium. If you are weighing breeding against buying, compare the cost of bought feeders with a breed-your-own setup across crickets, roaches, mealworms, superworms, black soldier fly larvae, hornworms, and silkworms.

      For chickens, mealworms are a treat, not a feed, and the limits are strict. Wormera says to feed adult chickens about 10 to 15 mealworms per day. Backyard Chickens advice caps all treats at 10 percent of the daily diet, and several chicken guides put the daily limit at 10 live mealworms or 4 dried mealworms per bird. Overfeeding causes weight gain, fewer eggs, difficulty laying, and in the worst cases fatty liver disease. The calculator checks your per-bird rate against the Wormera guide and warns you above 15 a day, which is 105 a week.

      Mealworms also have a place beyond the animals in this calculator. Wild birds love them: bluebirds, robins, and parrots all eat live or dried mealworms, and they are a useful protein boost during molting or winter. Fish eat them too, and small mammals such as sugar gliders and hedgehogs take them as treats. For human consumption, Bug Breeding notes that mealworms are more than 50 percent protein by dry weight, and they must be cooked to 165 degrees F to be safe. Keep a separate bin for human-grade worms, gut-loaded with fresh vegetables before harvest. One caution for readers outside the United States: feeding processed insect protein to farmed poultry is restricted in the European Union, so check your local rules before feeding home-raised mealworms to a commercial flock.

      Features

      Starter colony sizing from your weekly need. The calculator does not hand you a single blended starter number. It builds your starter from a 500-worm breeding core that scales with your monthly need, plus an 8-week feeding buffer when you feed from day one, and it shows the published tiers behind the answer.

      Bin count and size, now and later. You get the bins you need on day one and the bins you need once the colony is established, with the bin size in quarts. The counts follow the Wormera separation approach and the Bug Breeding 1 to 2 bins to start, 3 to 5 established.

      A timeline with both harvest meanings. The timeline shows the first harvest of starter stock, the first home-bred generation, and the self-sustaining date, in weeks and, with a start date, in calendar dates. It adjusts to your room temperature across four bands, from cold to hot, so a winter garage colony gets an honest slow timeline.

      A monthly yield range, judged by its low end. The yield range comes from the egg math with your survival guess, and the calculator compares the low end against your monthly need. If the farm falls short, it names the shortfall and suggests the fixes that work: a second starter batch or a higher breeder reserve.

      A self-sustaining check. The calculator counts your breeding beetles and checks them against the 50-beetle line Bug Breeding gives for a self-sustaining colony. Below the line, the headline says so and a warning repeats it, so a short reserve can never slip past unnoticed.

      A chicken feeding check. For chickens, the calculator converts your weekly rate to worms per bird per day and checks it against the Wormera guide of 10 to 15 mealworms a day. Above 15 a day it warns you, with the 10 percent treat rule alongside.

      Starter pricing from current breeder prices. The starter cost uses the Bug Breeding 2026 price of $12 to $25 per 1,000 worms. A 500-worm starter costs $6.00 to $12.50, and a 5,980-worm starter costs $71.76 to $149.50.

      Use cases

      A leopard gecko owner starting a first colony. One gecko eating 15 worms a week needs about 65 a month. On a patient start the calculator gives a 500-worm starter in 1 bin of 10 quart, 50 breeding beetles, a first harvest in 6 to 8 weeks, and a yield of 1,250 to 2,500 worms a month at 50 percent survival. The yield is far above the need, which is normal: the 500-worm core is the price of a self-sustaining colony, and the surplus worms can be frozen or shared with other keepers.

      A backyard chicken keeper with a small flock. Five hens eating 70 worms a week each need 350 worms a week and about 1,517 a month, above the Wormera Large tier. On a patient start the breeding core scales to 1,000 worms, the starter is 1,000 worms in 1 bin of 10 quart, and the farm grows to 5 bins. On a feed-now start the buffer adds 2,800 worms and the starter becomes 3,800 worms in 2 bins of 20 quart. The feeding check passes either way: 70 worms a week is 10 a bird a day.

      A homesteader feeding a large flock. Twenty-five chickens eating 70 worms a week each need 1,750 worms a week and about 7,583 a month. On a patient start the breeding core is 4,000 worms, and the starter is 4,000 worms in 2 bins, growing to 5 bins. On a feed-now start the buffer adds 14,000 worms and the starter becomes 18,000 worms, which triggers the large-order warning. A flock this size may be better served by a black soldier fly colony alongside the mealworms: our Black Soldier Fly Bin Calculator sizes a bin from your weekly food waste.

      Sources

      Every figure in this tool comes from a published guide, re-verified from the original publisher's live page on 20 November 2026. Where the guides disagree, the tool presents the disagreement rather than hiding it.

      • Bug Breeding: How to Breed Mealworms — starter colony 500 to 1,000 live mealworms; harvest within 6 to 8 weeks on starter stock; first harvest 8 to 12 weeks in the FAQ; full life cycle 10 to 12 weeks at 75 degrees F; larva 8 to 10 weeks; pupa 1 to 3 weeks; beetle 2 to 3 months laying 300 to 500 eggs; 50 or more beetles self-sustaining; full colony 5,000 or more worms per month; 10 to 20 quart bins, 1 to 2 to start and 3 to 5 established; 70 to 80 degrees F ideal, below 65 growth slows dramatically, above 85 stress or death; humidity 50 to 60 percent; substrate 3 to 4 inches; leave 10 to 20 percent of largest larvae to pupate; $12 to $25 per 1,000 worms in 2026.
      • Wormera: Mealworm Breeding Farm Kit Detailed Instructions — kit table: Small 250 or more worms a month for multiple small reptiles or up to 5 chickens, Medium 500 or more for larger reptiles or 5 to 10 chickens, Large 1,000 or more for multiple large reptiles or 10 to 15 chickens; adult chickens about 10 to 15 mealworms per day; optimum 70 to 85 degrees F; humidity 50 to 60 percent; egg hatch 4 to 19 days; larva 3 to 6 months; pupa 1 to 3 weeks; beetle 2 to 3 months; substrate 1 to 2 inches of wheat bran; allow about 5 percent of large worms to pupate; 5 containers for separation, 1 for combination; over 25 chickens, add 5,000 large and 5,000 small or medium worms with 500 left to pupate.
      • Backyard Chickens: Feeding Dried Mealworms to Your Chickens — treats must not exceed 10 percent of the daily food intake; one or two beakfuls of dried mealworms a day is sufficient; rotate treats and give mealworms no more than twice a week.
      • Backyard Chickens: Mealworm Starter Set — starter set of 1,000 medium mealworms plus 50 freshly morphed ready-to-lay beetles, in two 6 quart containers with screen vents and about 1.5 pounds of wheat bran.
      • Dry Mealworm: How to Breed Mealworms — mass-rearing review summary: full generation roughly 75 to 90 days under good conditions; female lays roughly 250 to 500 eggs; beetles live 1 to 3 months; optimum about 8.4 adults per square decimeter, roughly 50 beetles in a 30 by 20 centimeter tray; keep 5 to 10 percent of larvae for breeding.
      • Exotic Nutrition: Instructions on Breeding Mealworms — start with as few as 150 mealworms, but at least 500 is recommended.
      • Leopard Gecko: Mealworms for Leopard Geckos — an adult eats 6 to 10 mealworms two to three times a week, mixed with crickets or dubia roaches.
      • The Bug Shed: Can Bearded Dragons Eat Mealworms? — mealworms are an occasional treat for adult bearded dragons: 5 to 10 per feeding, 1 to 2 times per week; the hard chitin shell raises impaction risk.

      Two figures in this tool are planning assumptions, not published figures, and they are labeled as such wherever they appear. The survival share is user-entered with a 50 percent default, because no breeder guide publishes a survival rate. The breeding-core scaling rule, 500 worms per 1,000 worms a month of need above the Large tier, is the calculator's own construction from the Bug Breeding 500-worm starter and the Wormera 1,000-a-month Large tier.

      Frequently asked questions

      How many mealworms do I need to start a colony?

      It depends on whether you feed your animals from the starter stock. Bug Breeding recommends 500 to 1,000 medium to large larvae, which gives you enough to start harvesting within 6 to 8 weeks while still leaving plenty to pupate and breed. Exotic Nutrition and wikiHow allow as few as 150, but Bug Breeding warns that 200 to 300 worms means 4 or more months to ramp up. If you plan to feed your animals from day one, wikiHow suggests about 5,000 to begin with, and Reptile Knowledge suggests 2,000 to 4,000. This calculator sizes your starter from your weekly need and your start mode: a patient start gets a 500-worm breeding core, and a feed-now start adds an 8-week feeding buffer on top.

      How long until my first harvest?

      Starter stock grows to feed size in about 6 to 8 weeks, per Bug Breeding, while the first home-bred generation takes 8 to 12 weeks. A full breeding cycle, from egg to adult beetle to new eggs, takes about 3 months, and the colony is self-sustaining in about 10 weeks at 75 degrees F. Temperature changes everything: below 65 degrees F growth slows dramatically, and in a cool room the larval stage can stretch to 3 to 6 months, per Wormera. Enter your real room temperature and a start date, and the calculator gives you the three milestones as calendar dates.

      How many bins do I need?

      Start with 1 to 2 bins, and plan on 3 to 5 once the colony is established, per Bug Breeding. The calculator gives you 1 bin to start when your starter is 1,000 worms or fewer, and 2 bins above that. The established farm runs 3 bins for a Small-tier need, 4 bins for a Medium or Large need, and 5 bins beyond the Large tier, following the Wormera separation approach: one bin each for eggs and micro worms, small and medium worms, large worms, pupae, and beetles. Bin size is 10 quart for a small starter and 20 quart for a large one, inside the Bug Breeding range of 10 to 20 quart clear plastic storage bins.

      How many mealworms will my farm produce each month?

      It depends on your beetle count and on how many hatched worms survive to feed size. Each female lays 250 to 500 eggs over about 2.5 laying months, and about half your beetles are female, so a 50-beetle colony at 50 percent survival yields about 1,250 to 2,500 worms a month. Bug Breeding says a full colony can produce 5,000 or more worms per month indefinitely, and the Wormera kit table gives 250 or more a month for the Small kit, 500 or more for Medium, and 1,000 or more for Large. The calculator judges your farm by the low end of its yield range: if the low end covers your monthly need, the farm is sized right.

      How many mealworms can I feed my chickens?

      Wormera says to feed adult chickens about 10 to 15 mealworms per day, and Backyard Chickens advice caps all treats at 10 percent of the daily diet. Several chicken guides put the daily limit at 10 live mealworms or 4 dried mealworms per bird, because dried mealworms are much richer in protein than live worms. Overfeeding causes weight gain, fewer eggs, difficulty laying, and in the worst cases fatty liver disease. The calculator checks your weekly rate against the Wormera guide and warns you when it runs above 15 a day, which is 105 a week.

      What temperature do mealworms need?

      The Wormera optimum is 70 to 85 degrees F, and Bug Breeding puts the ideal band at 70 to 80 degrees F, with humidity at 50 to 60 percent. Below 65 degrees F growth slows dramatically, and above 85 degrees F the worms can become stressed or die. At 75 degrees F the full life cycle is 10 to 12 weeks. A small heating mat under one corner of the bin is the standard fix for a cold room in winter, and the calculator's timeline adjusts across four temperature bands so a cool-room colony gets an honest slow timeline.

      How much does it cost to start a mealworm farm?

      Bug Breeding puts the 2026 price at $12 to $25 for 1,000 worms, so a 500-worm starter costs $6.00 to $12.50 and a 5,980-worm starter for 8 chickens feeding from day one costs $71.76 to $149.50. The bins cost under $15 in total: 10 to 20 quart clear plastic storage bins, wheat bran for substrate, and a slice of carrot for moisture. After the starter colony the running cost is close to zero, because the colony replaces what you harvest and the bran and vegetables cost very little.

      Why does the calculator ask for a survival share?

      Because no breeder guide publishes one, and the yield depends on it. Not every egg becomes a feed-size worm: some eggs fail, some larvae die, and some get eaten by their bin mates. Rather than invent a survival rate and hide it inside the arithmetic, the calculator asks you to enter your planning guess, from 10 to 90 percent, with a 50 percent default. A careful keeper in a warm room with separate stage bins can reasonably expect the higher end, and a first colony in a cool room should plan on the lower end. If the farm only covers your need at an optimistic survival guess, it is undersized.