Word Counter

words per minute

238 words per minute is the average for silent reading of English non-fiction (Brysbaert, 2019). Speaking time always uses 150 words per minute, the average rate for US English conversation (National Center for Voice and Speech).

Words

0

Paste or type some text above to see the counts.

Characters

0

including spaces

Characters, no spaces

0

spaces removed

Sentences

0

split on . ! ?

Paragraphs

0

blank-line separated

Reading time

0 sec

at 238 words per minute

Speaking time

0 sec

at 150 words per minute

Average word length

0

letters per word

Average sentence length

0

words per sentence

Longest word

–

0 letters

Reading-time gauge

0 min5 min15 min30 min or more

Paste or type some text to see where it lands.

Most frequent words

  1. No words yet.

Paste or type some text above to see the counts.

    Counting rules

    • Words are whitespace-separated tokens that contain at least one letter or number. A hyphenated compound such as state-of-the-art counts as one word, a number such as 2026 counts as one word, and a contraction such as don’t counts as one word. A token made only of punctuation or emoji is not a word.
    • Characters are Unicode code points: each letter, number, space, and single emoji counts as one. An emoji built from several code points joined together counts as several characters.
    • Sentences split on full stops, exclamation marks, and question marks. Abbreviations such as Dr. and decimals such as 3.5 each add a sentence, so the sentence count is a rough guide.
    • Paragraphs are blocks separated by blank lines. A single line break does not start a new paragraph.
    • Most frequent words are counted case-insensitively, with surrounding punctuation removed. Ties are listed in the order the words first appear. No words are left out: common words such as “the” are counted like any other.
    This tool provides estimates for general guidance only. Word, sentence, and paragraph counts follow the counting rules stated on this page, and other tools may count edge cases differently. Reading and speaking times are estimates from published average rates, not measurements of any one reader.
    Quick answer: Paste or type any text to count its words, characters, sentences, and paragraphs as you type, with reading time at 238 words per minute and speaking time at 150 words per minute. A 1,000-word article takes about 4 minutes to read and about 6 minutes 40 seconds to say aloud. The counting rules are stated openly on the page, so you can see exactly why the count matches Microsoft Word on ordinary prose and where it differs on edge cases.

    Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

    How to use the Word Counter

    How many words is that? This word counter answers the question the moment you paste or type: words, characters with and without spaces, sentences, paragraphs, reading time, speaking time, average word length, average sentence length, the longest word, and the five most frequent words. Every count updates live as you type, and nothing leaves your browser: the counting runs on your own device, so your draft is never uploaded or stored.

    1. Paste or type your text. Click in the box and type, or paste from anywhere: a Word document, Google Docs, an email draft, a notes app, a web page. The counts update on every keystroke, so you can watch a draft grow toward a word limit in real time.
    2. Read the headline number. The big figure is the word count. Under it, the cards show characters with spaces, characters without spaces, sentences, paragraphs, reading time, speaking time, average word length, average sentence length, and the longest word.
    3. Set your reading speed. The default is 238 words per minute, the average for silent reading of English non-fiction from Brysbaert's 2019 meta-analysis of 190 studies. If you read fiction, pick 260. If you read slowly or the text is dense, pick 175 or 200. Pick Custom to type your own speed, from 50 to 1,000 words per minute. Speaking time always uses 150 words per minute, the average rate for US English conversation given by the National Center for Voice and Speech.
    4. Check the reading-time gauge. The gauge shows where your text lands on a scale from a quick note to a long document: under a minute, a few minutes, a solid article, a long read, or over half an hour. It is the fastest way to judge whether a piece asks too much of its reader.
    5. Scan the most frequent words. The top five words, counted case-insensitively, show what your text keeps saying. If the same word tops the list in every draft, that is a habit worth noticing. No words are left out: common words such as "the" are counted like any other, and ties are listed in the order the words first appear.
    6. Try the sample text. The Paste sample text button fills the box with a 113-word example, two paragraphs about word counting itself, so you can see every count, the gauge, and the frequency list working before you paste your own draft.
    7. Clear and start again. The Clear button empties the box and resets every count to zero. Paste the next draft and the counts start over.

    This counter is one of the free tools on Tools Elite. If you are counting words for a school essay, our GPA Calculator works out what the grade for that essay does to your average. If you are printing a long draft, our Printer Cost Per Page Calculator prices the ink and paper before you hit print. The counting rules are stated openly below, so you can see exactly why the count matches Microsoft Word on ordinary prose and where it differs on edge cases.

    How it works

    The counter applies five rules to your text, in order. Each rule is simple enough to check by hand, and the worked examples below show the arithmetic.

    Words. The text is split on whitespace: spaces, tabs, and line breaks. Each token that contains at least one letter or number counts as one word. A token made only of punctuation or emoji does not count. A hyphenated compound such as state-of-the-art counts as one word, because no whitespace separates its parts. A number such as 2026 counts as one word. A contraction such as don't counts as one word.

    Characters. Characters are counted as Unicode code points: each letter, number, space, line break, and single emoji counts as one character. Characters without spaces is the same count with every whitespace character removed. An emoji built from several code points joined together, such as a family emoji, counts as several characters, because it is several code points.

    Sentences. The text is split on runs of sentence-ending punctuation: full stops, exclamation marks, and question marks. Each piece that contains at least one letter or number counts as one sentence. An ellipsis counts as one break, not three. A fragment with no ending punctuation still counts as one sentence, so "Hello world" with no full stop is one sentence.

    Paragraphs. The text is split on blank lines. Each block that contains at least one letter or number counts as one paragraph. A single line break does not start a new paragraph.

    Times. Reading time is words divided by your reading speed. Speaking time is words divided by 150. Both are shown in whole seconds, rounded up, so a text that takes 2.3 seconds to read shows as 3 seconds: the counter never claims a text is shorter than it is.

    Averages and extremes. Average word length is total letters divided by words, to one decimal place. Average sentence length is words divided by sentences, to one decimal place. The longest word is the word with the most letters; ties go to the first one in the text. The five most frequent words are counted case-insensitively, with surrounding punctuation removed, ranked by count, with ties listed in first-appearance order.

    Worked example 1: one sentence. Take "The quick brown fox jumps over the lazy dog." It has 9 words, 44 characters with spaces, and 36 characters without spaces (44 minus 8 spaces). It has 1 sentence and 1 paragraph. The letters add up to 35 across 9 words, so the average word length is 3.9 letters. The longest words are quick, brown, and jumps at 5 letters each, and the first of them, quick, is the longest word. Reading time is 9 divided by 238, about 0.04 minutes, shown as 3 seconds. Speaking time is 9 divided by 150, shown as 4 seconds.

    Worked example 2: a 1,000-word article. At the default 238 words per minute, 1,000 words take 1,000 divided by 238, about 4.2 minutes, shown as 4 min 13 sec. At the fiction average of 260 words per minute the same article takes 3 min 51 sec. Spoken aloud at 150 words per minute it takes 6 min 40 sec. At the slow end of the adult range, 175 words per minute, it takes 5 min 43 sec; at the fast end, 300 words per minute, it takes 3 min 20 sec. The same 1,000 words take one reader 3 minutes and another nearly 6, which is why the reading speed is a setting, not a fixed fact.

    What counts as a word

    There is no single definition of a word that every counter shares. This counter uses the whitespace rule, the same rule Microsoft Word and Google Docs use for ordinary prose: a word is a run of characters separated by spaces, tabs, or line breaks, as long as it contains at least one letter or number. The rule is easy to state, easy to check, and it matches the count your reader's word processor gives for almost any normal text. The edge cases are where counters part ways, and each one is settled here, openly.

    Hyphenated words count as one. Well-known is one word. State-of-the-art is one word, however many hyphens it has. The hyphen does not split a word because no whitespace separates the parts. Microsoft Word counts hyphenated compounds the same way, and Google Docs usually does too, though some counters split them: one survey of word counter pages found three of the five that define a word count hyphenated compounds as one, and two count them as two. If your limit is enforced by a specific tool, check the final count in that tool.

    Numbers count as words. A number standing on its own, such as 2026 or 3.5 or 1,200, counts as one word, the same way Word and Google Docs count numbers. Dates and times written without spaces, such as 10:30 or 2026-11-20, also count as one word each. A number attached to a word, such as B2B or 3D, is part of that word, not a second one.

    Contractions and possessives count as one. Don't, it's, we're, and Mary's are each one word. The apostrophe joins; it does not split. A trailing apostrophe, as in believin', does not change that.

    Punctuation-only tokens do not count. A token made only of punctuation, such as three dots, three dashes, or three exclamation marks standing alone, is not a word. Neither is a lone hyphen or em dash between spaces. Some counters count these as words, which is one reason two counters can differ by a word or two on the same text. This counter leaves them out, because a word limit is a limit on words, not on marks.

    Emoji are characters, not words. An emoji on its own is not a word, but it is a character: one emoji counts as one character in the character count. An emoji glued to a word, such as "hello" followed by a smiley with no space, stays part of that word token. An emoji built from several code points joined together counts as several characters, because the character count counts Unicode code points, not pictures.

    Web addresses and email addresses count as one word each. A URL or an email address written without spaces is one whitespace token, so it counts as one word. That matches Word and Google Docs. It also means a pasted bibliography full of long URLs adds one word per link, not one word per piece of the link.

    Em dashes are the awkward case. An em dash with spaces around it, as in "one — two", separates two words, and the dash itself is not a word. An em dash with no spaces, as in "one—two", is one whitespace token here, so it counts as one word. Word treats the dash as a separator in that case and counts two. The difference is real, it is documented, and on a long document it is worth a word or two at most.

    Languages without spaces need a different counter. Chinese, Japanese, and Thai are written without spaces between words, so a whitespace rule cannot split them into words at all: a whole Chinese sentence with no spaces counts as one token. This counter is built for text written with spaces. The Unicode standard for word boundaries, UAX #29, describes a fuller segmentation algorithm that handles scripts without spaces, and the browser's own text segmenter follows it; this counter states its simpler rule instead, so you know exactly what you are getting.

    TextCounts asWhy
    well-known1 wordNo whitespace separates the parts
    state-of-the-art1 wordSame rule, however many hyphens
    don't1 wordThe apostrophe joins
    20261 wordNumbers count as words
    3.51 wordA decimal is one token
    1,2001 wordThe comma does not split it
    10:301 wordA time is one token
    hello@example.com1 wordNo whitespace in an address
    ---0 wordsPunctuation only, no letter or number
    ...0 wordsPunctuation only, no letter or number
    A single emoji0 words, 1 characterAn emoji is a character, not a word
    one — two2 wordsThe spaced dash separates; the dash is not a word
    one—two1 wordOne whitespace token; Word counts two

    What counts as a sentence

    A sentence is a piece of text between sentence-ending punctuation: a full stop, an exclamation mark, or a question mark. Runs of that punctuation count as one break, so an ellipsis is one break and an excited "Really?!" is one break. A piece with no ending punctuation still counts, so a single line with no full stop is one sentence. That is the whole rule, and it is deliberately simple: real sentence splitting needs a parser that knows abbreviations, decimals, and initials, and this counter does not pretend to be one.

    Abbreviations inflate the count. Every full stop looks like the end of a sentence to this counter, including the ones inside abbreviations. "Dr. Smith met Mr. Jones at 10:30 a.m. on Main St." is one sentence to a reader and five sentences to this counter: "Dr", "Smith met Mr", "Jones at 10:30 a", "m", and "on Main St". The same happens with e.g., i.e., U.S., and initials such as J. R. R. Tolkien. If your text is full of abbreviations, treat the sentence count as an upper bound, not a fact.

    Decimals inflate the count too. The full stop inside 3.5 is a sentence break here. "She bought 3.5 kg of apples for $12.50 in 2026." is one sentence to a reader and three sentences to this counter. A financial report or a science paper full of decimals will show far more sentences than it has. The word count is unaffected: 3.5 is still one word.

    Headings merge into the next sentence. A heading with no ending punctuation, such as "Chapter One" on its own line, joins the sentence that follows it, because nothing marks where the heading ends. A page of short headings and short paragraphs can therefore show fewer sentences than a reader would count. The same is true of list items with no ending punctuation: a list of five items with no full stops is one sentence here.

    Lists and fragments count as sentences. A fragment with no ending punctuation counts as one sentence, which is the honest choice for a counter: a to-do list, a slide, or a half-finished draft still has text worth counting. But it means the average sentence length on a list-heavy page is not a readability measure. Read it as words per sentence-shaped chunk, not as a judgment on your style.

    None of this makes the sentence count useless. On ordinary prose with few abbreviations and decimals, it is close to the true number, and the average sentence length it produces is a fair guide to how heavy your sentences run. The counter states the rule and its limits rather than hiding them, so you can judge when the number is solid and when it is not.

    What counts as a paragraph

    A paragraph is a block of text separated from the next block by a blank line: two line breaks with nothing but whitespace between them. A single line break does not start a new paragraph. That matches how pasted web text and plain-text drafts are usually laid out, where a blank line is the visible paragraph break.

    Microsoft Word counts paragraphs differently: Word counts every paragraph mark, so a single hard return starts a new paragraph there. A poem with a hard return after every line is one paragraph here and a dozen in Word. A document where every line ends in a hard return, such as text pasted from a PDF, shows the same gap. If the paragraph count matters for a limit, check which definition the limit uses.

    Pasted text can also fool the paragraph count in the other direction. Text copied from a web page often carries single line breaks where the eye sees paragraphs, because the page's own line wrapping is not a paragraph break. This counter follows the blank lines in the pasted text, not the layout of the page it came from. If the count looks low, check whether the pasted text has real blank lines between its paragraphs.

    An empty block does not count. A page of blank lines is zero paragraphs, and a block of pure punctuation is zero paragraphs, for the same reason a token of pure punctuation is zero words: a paragraph is a block of words, not a block of marks.

    Reading time and speaking time

    Reading time is the word count divided by a reading speed. The only judgment in it is the speed, and this page uses published figures for that, not guesses.

    The reading speed is 238 words per minute by default. That is the average for silent reading of English non-fiction among adults, from Marc Brysbaert's 2019 meta-analysis in the Journal of Memory and Language, which pooled 190 studies with 18,573 participants published between 1901 and 2019. The same paper puts fiction at 260 words per minute, because fiction uses shorter words: non-fiction averages 4.6 letters per word against 4.2 for fiction, and that gap explains most of the speed difference. Reading aloud averages 183 words per minute across 77 studies. Most adults read non-fiction between 175 and 300 words per minute, so the default is a middle, not a norm: a slow reader and a fast reader differ by nearly two to one on the same text.

    The famous 300 words per minute is too high. For decades the figure repeated in textbooks and productivity writing was 300 words per minute. Brysbaert traced it to a handful of small, sometimes cherry-picked early studies and showed the pooled evidence lands in the high 230s to high 240s, not at 300. A counter that defaults to 300 flatters every text by about a quarter: a 1,000-word article it calls a 3-minute read is a 4-minute read at the measured average. This counter defaults to 238 and lets you pick 300 if you know you read that fast.

    The figures have limits. Brysbaert's averages describe healthy adult native speakers aged about 18 to 60, reading normal text for comprehension. Rates run lower for children, older adults, and people reading in a second language, and lower again for dense technical or legal text. A reading time is an estimate for a typical reader, not a promise about any one reader.

    The speaking speed is 150 words per minute. That is the average rate for English speakers in the United States given by the National Center for Voice and Speech, a figure quoted in public-speaking textbooks ever since. A prepared speech runs slower than conversation, usually 120 to 150 words per minute with pauses, so a talk planned at 150 leaves no room for pauses: plan a speech at 130 if the clock is tight. As a cross-check, audiobook narration runs about 155 words per minute, from ACX's figure of 9,300 words per finished hour of audio, which sits close to the conversational average.

    Times round up, never down. Both times are shown in whole seconds, rounded up. A text that takes 2.3 seconds to read shows as 3 seconds. The counter never claims a text is shorter than it is, because the reader who budgets on a rounded-down time runs out of time.

    WordsReading time at 238 words per minuteSpeaking time at 150 words per minute
    2501 min 4 sec1 min 40 sec
    5002 min 7 sec3 min 20 sec
    1,0004 min 13 sec6 min 40 sec
    2,0008 min 25 sec13 min 20 sec
    5,00021 min 1 sec33 min 21 sec
    10,00042 min 2 sec1 hr 6 min

    To find your own reading speed, time yourself reading a passage of known length and divide the words by the minutes. A 500-word passage read in 2 minutes is 250 words per minute. One timed passage beats any default, and the Custom speed setting exists for the number you measure.

    Why word counters disagree

    Paste the same text into three counters and you can get three numbers. None of them is wrong: each counter answers a slightly different question, and the differences come from a handful of choices that no standard settles.

    There is no universal definition of a word. The Unicode standard for word boundaries, UAX #29, defines default word boundaries for text editing, and it allows implementations to adjust its rules. Word processors, web counters, and style guides each adjust them differently. The Chicago Manual of Style, AP, and MLA count a hyphenated compound as one word, because no whitespace separates its parts, but no style guide sets a rule for word counts in general: the counting rule comes from the tool your reader uses.

    Microsoft Word and Google Docs do not publish their exact rules. Microsoft's support page explains where the count appears and how to include text boxes, footnotes, and endnotes in it, but it does not publish what counts as a word in each edge case. Google's help page says the count covers everything except headers, footers, and footnotes unless you select a section first. Both count ordinary prose by splitting on whitespace, which is why they agree with this counter on normal text and part ways on the edges: hyphenated words, dashes, slashes, and symbols.

    What is in the document is the biggest difference. Word's Word Count box has a checkbox for text boxes, footnotes, and endnotes, off by default. Google Docs leaves out headers, footers, and footnotes unless you select them. This counter counts exactly the text you paste: if you paste the whole document including the footnotes, they are counted; if you paste only the body, they are not. A gap of dozens of words between this counter and Word is usually the footnotes, not the words.

    The edges are worth a word or two. Hyphenated compounds, em dashes without spaces, slashes such as and/or, and punctuation-only tokens are the usual suspects. Word counts a hyphenated compound as one word; some web counters count it as two. Word treats an em dash as a separator even without spaces; this counter counts one—two as one word. Word counts a slashed pair such as and/or as one word; some tools count two. On a typical 1,000-word document the counters agree within a word or two, and on a 5,000-word document within a handful.

    Character counts differ for a different reason. Some counters count UTF-16 code units, the way JavaScript stores text, so an emoji counts as two characters. This counter counts Unicode code points, so one emoji is one character. A text full of emoji can differ by dozens of characters between the two methods while the word count stays identical. Neither method is wrong; they count different things, and this page says which one it uses.

    The practical rule is simple. For a hard limit, check the final count in the tool that enforces it: the professor's Word, the journal's submission form, the contest's counter. For everything else, a counter that states its rules openly, as this one does, is the counter you can trust, because you can see exactly where any difference comes from.

    How long is your text

    A word count only means something against a length you can picture. The table below gives two anchors: how long a text takes to read, and what fiction of that length is called.

    For fiction, the most widely quoted length bands are the category rules of the Nebula Awards, run by the Science Fiction and Fantasy Writers Association: a short story is under 7,500 words, a novelette is 7,500 to 17,499, a novella is 17,500 to 39,999, and a novel is 40,000 words or more. Those lines exist to sort award entries, not to describe what bookshops sell, and publishers' own ranges differ, but they are the one formal set of definitions writers share. A 40,000-word novel takes about 2 hr 48 min to read at the average speed; a 100,000-word novel takes about 7 hours.

    LengthWordsReading time at 238 words per minute
    A short emailAbout 100About 26 sec
    A long emailAbout 300About 1 min 16 sec
    A blog postAbout 1,000About 4 min 13 sec
    A school essayAbout 2,000About 8 min 25 sec
    A short story (Nebula band)Under 7,500Under about 32 min
    A novelette (Nebula band)7,500 to 17,499About 32 min to about 1 hr 14 min
    A novella (Nebula band)17,500 to 39,999About 1 hr 14 min to about 2 hr 48 min
    A novel (Nebula band)40,000 or moreAbout 2 hr 48 min and up

    The reading times are computed from the 238 words per minute average, so they carry its limits: a dense report reads slower than a novel of the same length, and a second-language reader reads slower than a native speaker. Use the gauge above the counts for a quick judgment, and the exact reading time for a deadline.

    Common mistakes to avoid

    • Counting what the limit excludes. Many word limits exclude the title page, the reference list, and the appendices. Paste only the counted part, or the counter will faithfully count text the limit does not want.
    • Pasting the footnotes by accident. A Word document pasted whole carries its footnotes into the count, while Word's own count leaves them out unless the checkbox is ticked. If this counter runs higher than Word by dozens of words, the footnotes are the usual cause.
    • Trusting the sentence count on abbreviation-heavy text. Dr., Mr., e.g., and decimals each add a sentence here. On a legal or scientific passage the sentence count is an upper bound, and the average sentence length is lower than the truth.
    • Using the default speed for hard text. 238 words per minute is the average for ordinary non-fiction. A contract, a textbook chapter, or a text in a second language reads slower. Pick 175 or 200 for dense material, or measure your own speed.
    • Counting the draft instead of the final version. A count taken before the last edit is stale the moment the edit lands. Paste the final text, or re-paste after editing.
    • Forgetting the enforcer's tool. A limit is enforced by a specific counter: the professor's Word, the journal's form, the contest's page. A count that is right here and wrong there is wrong for the purpose. Check the final number where it will be judged.
    • Reading the frequency list as a keyword report. The most frequent words include common words such as "the" by design, because nothing is left out. It shows what your text keeps saying, not what it is about. A keyword analysis needs stopwords removed and a longer text; this list is a mirror, not a report.

    Frequently asked questions

    How does this word counter count words?

    It splits your text on whitespace, so each run of characters between spaces, tabs, or line breaks is one word, as long as it contains at least one letter or number. A hyphenated compound such as state-of-the-art counts as one word, a number such as 2026 counts as one word, and a contraction such as don't counts as one word. Tokens made only of punctuation or emoji, such as three dots or a smiley face, do not count as words. The full rules, with worked examples, are in the counting rules section above.

    Why does my word count differ from Microsoft Word?

    For ordinary prose the counts usually match, because Word also splits on whitespace. Differences show up at the edges: Word and Google Docs do not publish their exact counting rules, they treat footnotes, headers, and text boxes differently, and they disagree with each other on some hyphenated words and dashes. This counter states its rules openly in the counting rules section, so you can see exactly where a difference comes from. If a limit is enforced by a specific program, check the final count in that program.

    Do hyphenated words count as one word?

    Yes, here. A hyphenated compound written without spaces, such as well-known or state-of-the-art, counts as one word, because no whitespace separates its parts. Microsoft Word counts hyphenated compounds the same way, and Google Docs usually does too, though some counters split them. An em dash with spaces around it separates two words, and a hyphen standing alone between spaces is not a word at all.

    How long does it take to read 1,000 words?

    About 4 minutes at the average adult rate of 238 words per minute for silent reading of English non-fiction, from Brysbaert's 2019 meta-analysis of 190 studies. Fiction reads faster, about 260 words per minute, so 1,000 words of a novel takes under 4 minutes. Most adults read non-fiction between 175 and 300 words per minute, so the same 1,000 words take one reader 3 minutes and another nearly 6. Change the reading speed above to match your own pace.

    How long does it take to speak 1,000 words?

    About 6 minutes 40 seconds at 150 words per minute, the average rate for US English conversation given by the National Center for Voice and Speech. A prepared speech runs slower, usually 120 to 150 words per minute with pauses, so plan on 7 to 8 minutes for a 1,000-word talk. Audiobook narration runs about 155 words per minute, based on ACX's figure of 9,300 words per finished hour.

    Does the counter count numbers as words?

    Yes. A number standing on its own, such as 2026 or 3.5 or 1,200, counts as one word, the same way Microsoft Word and Google Docs count numbers. Dates and times written without spaces, such as 10:30 or 2026-11-20, also count as one word each. The decimal point inside 3.5 does split the sentence count, so a passage full of decimals shows more sentences than it really has; that is a known limit of the sentence rule, explained above.

    Is my text uploaded or stored anywhere?

    No. Everything runs in your browser: the counts are computed on your own device the moment you type or paste, and nothing is sent to a server. Closing the page erases the text. That also means the counter works offline once the page has loaded.

    Sources

    Every figure on this page comes from one of the sources below, each accessed 20 November 2026. Where sources disagree, the page shows the disagreement and says which figure the counter uses.

    • doi.org — Brysbaert, M. (2019). How many words do we read per minute? A review and meta-analysis of reading rate. Journal of Memory and Language, 109, 104047. Average silent reading rate for adults in English: 238 words per minute for non-fiction, 260 for fiction, from 190 studies with 18,573 participants; average oral reading rate 183 words per minute from 77 studies with 5,965 participants; most adults read non-fiction between 175 and 300 words per minute and fiction between 200 and 320. Accessed 20 November 2026.
    • sunycreate.cloud — SUNY Empire State University, Public Speaking: Vocal Aspects of Speech Delivery. Quotes the National Center for Voice and Speech: the average speaking rate for English speakers in the United States is around 150 words per minute; in a public speaking situation, speak slower than average, around 125 to 150 words per minute. Accessed 20 November 2026.
    • virtualspeech.com — Average Speaking Rate and Words per Minute. Attributes the 150 words per minute average conversation rate for English speakers in the United States to the National Center for Voice and Speech; presentations 100 to 150 words per minute, conversation 120 to 150, audiobooks 150 to 160. Accessed 20 November 2026.
    • micbuddy.com — Words Per Minute: Average Speaking Rate by Situation. Audiobook narration about 155 words per minute, from ACX's estimate of 9,300 words per finished hour of audio; everyday conversation about 150 words per minute (National Center for Voice and Speech). Accessed 20 November 2026.
    • support.microsoft.com — Word count. Word displays the word count in the status bar and counts pages, paragraphs, lines, and characters; the Word Count dialog can include text boxes, footnotes, and endnotes. The page does not publish the exact rules for what counts as a word in edge cases. Accessed 20 November 2026.
    • support.google.com — Google Docs Editors Help: Count the words in a document. Word count shows words, characters, and pages; unless a section is selected, the count applies to everything except headers, footers, and footnotes; word count is only available in Google Docs. Accessed 20 November 2026.
    • unicode.org — UAX #29: Unicode Text Segmentation (Unicode 17.0.0). Default word, sentence, and grapheme-cluster boundary rules; implementations may use the default rules or declare a profile with precise changes. Accessed 20 November 2026.
    • wordcount.com — Do Hyphenated Words Count as One Word? WordCount, Microsoft Word, and Google Docs treat a hyphenated compound written without spaces as a single word; slashed pairs such as and/or count as one in Word and two in some tools; an em dash separates words. Accessed 20 November 2026.
    • aiwritingassistant.net — Free Online Word Counter Tool. Of 26 word counter pages read, five define a word at all and they contradict each other; three of the five say hyphenated words count as one and two say they count as two; Google Docs documents that its count leaves out headers, footers, and footnotes, while Microsoft's support page does not publish what it includes or excludes. Accessed 20 November 2026.
    • en.wikipedia.org — Nebula Award. The Science Fiction and Fantasy Writers Association's length categories: novel 40,000 words or more, novella 17,500 to 40,000 words, novelette 7,500 to 17,500 words, short story under 7,500 words. Accessed 20 November 2026.