Skip to content

YouTube Money Calculator

Verified Last reviewed: 20 November 2026. Page history

All views on your regular videos in a typical month, from YouTube Studio. Enter 0 if the channel has no long-form views.

Engaged Shorts views, not total Shorts views: Shorts RPM counts engaged views only. Find the figure in YouTube Studio. Enter 0 if the channel posts no Shorts.

Each niche uses the median RPM from AIR Media-Tech's 2026 study of 300 monetized channels, with the middle half of channels as the range. Pick All niches if your channel spans several topics.

Your own revenue per 1,000 views from YouTube Studio, in dollars. Leave blank to use the niche preset. A value here replaces the niche preset. Required if you picked Custom RPM above.

Your own Shorts revenue per 1,000 engaged views, in dollars. Leave blank to use the typical Shorts band of $0.07 to $0.20 per 1,000 views.

Estimated monthly ad earnings

How the estimate was worked out

      This tool provides estimates for general guidance only. YouTube RPMs vary enormously by niche, audience country, and season, so your actual earnings may fall well outside the range shown. Always check your real RPM in YouTube Studio before making financial decisions.

      Free to use — no sign-up, no paywall. Spotted a mistake? Tell us — we fix reported errors within 24 hours.

      Your inputs stay in your browser: every calculation runs on your device, and nothing you type is sent to our servers.

      At the all-niche median RPM of $2.30 per 1,000 views, 100,000 monthly long-form views earn about $230 a month from ads, while Shorts pay far less at $0.07 to $0.20 per 1,000 engaged views. Enter your monthly long-form views, your engaged Shorts views, and your niche above for an estimated monthly and annual range built from real 2026 RPM data, with the working shown step by step.

      Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

      How to use the YouTube Money Calculator

      This calculator estimates what a YouTube channel earns from advertising, from long-form videos and from Shorts, in one place. It is built for three kinds of creator: the new channel wondering whether the numbers add up, the growing channel planning around real income, and the established channel checking whether its RPM is normal for its niche. Every figure it produces is an estimate, and it is labeled as one, because YouTube pays no fixed rate per view. What it pays depends on your niche, your audience, and the time of year, and this tool shows you the range that reality produces instead of a single number that would be wrong for most channels.

      To get an estimate, follow these steps:

      1. Enter your monthly long-form views. This is the number of views your regular videos get in a typical month, from YouTube Studio. Use a normal month, not your best month ever: one viral video makes a bad planning figure. If your channel has no long-form videos, enter 0.
      2. Enter your monthly Shorts views, engaged views only. Shorts RPM is calculated on engaged views, the views YouTube counts for revenue sharing, not on every swipe past your Short. YouTube Studio shows engaged views in the Shorts analytics. Using total Shorts views here would overstate the estimate. If your channel posts no Shorts, enter 0.
      3. Select your channel niche. Each niche carries the median RPM measured by AIR Media-Tech across 300 monetized channels between May 2025 and May 2026, with the middle half of channels as the range. If your channel spans several topics, pick All niches, which uses the all-niche median of $2.30 per 1,000 views and the typical $1.00 to $5.00 band most channels sit in.
      4. Enter your own RPM if you know it. This is optional, and it is the single best way to tighten the estimate. Your real RPM is in YouTube Studio under Analytics. A long-form RPM here replaces the niche preset entirely, and a Shorts RPM here replaces the typical Shorts band. If you pick Custom RPM as the niche, the long-form RPM field becomes required.
      5. Read the estimate. The tool shows an estimated monthly range and a median figure, an annual range, the long-form and Shorts split, the number of long-form views it takes to earn $1,000 at your median RPM, and how many Shorts views match 1,000 long-form views. Every step of the arithmetic is shown, so you can check the working yourself.

      The calculator updates as you type, so you can test different view counts or niches and watch the estimate change. Try the example buttons under the form: an education channel at 100,000 long-form views, a gaming channel mixing long-form and Shorts, and a Shorts-heavy channel at 5,000,000 Shorts views. The third example is the instructive one. Five million Shorts views sounds like a fortune. The estimate shows what it really pays.

      One warning before you start: this tool estimates the earnings RPM captures, mainly advertising, plus the Premium, membership, and fan funding revenue folded into RPM. It does not count brand deals, affiliate income, or merchandise, which for many creators are worth more than ads. Treat the estimate as the floor of a channel's income, not the ceiling. If your channel earns from brand deals, price them separately with our Sponsored Post Rate Calculator, and if you sell through TikTok Shop as well, our TikTok Shop Affiliate Earnings Calculator estimates that income the same honest way, as a range from real rates.

      How it works

      YouTube does not pay per view. It pays a share of the advertising money your views generate, and that share is measured after the fact as RPM: revenue per mille, or revenue per 1,000 views. RPM is the number that matters for planning, because it is what actually lands in your account per 1,000 views, after YouTube takes its cut and after the views that showed no ad are counted in. By YouTube's definition, RPM also includes Premium, memberships, and fan funding, though ads dominate for most channels. A channel with an RPM of $2.30 earns $2.30 for every 1,000 views, or about $2,300 for every million.

      The arithmetic the tool runs is simple on purpose, so that every step can be checked:

      Monthly long-form earnings = monthly long-form views divided by 1,000, times RPM.

      Monthly Shorts earnings = monthly engaged Shorts views divided by 1,000, times Shorts RPM.

      Monthly total = long-form earnings plus Shorts earnings. Annual total = monthly total times 12.

      The tool runs that arithmetic three times for long-form video: once at the low end of the range, once at the median, and once at the high end. For Shorts it runs it twice, at the low and high ends of the typical Shorts band, and takes the midpoint for the median figure. The range is the measured spread of real channels in your niche, carried through the same formula.

      Two different revenue splits sit behind those RPM figures, and they explain why Shorts pay so much less. On long-form video, the creator keeps 55% of net ad revenue from ads on the watch page, and YouTube keeps 45%. That split has held since the Partner Program began, and it applies to every channel the same way. Shorts work differently. Ad revenue from the Shorts Feed goes into a Creator Pool, music licensing costs come out of the pool first, and the rest is divided between creators by their share of engaged views in each country. The creator then keeps 45% of the allocation. A Short can also carry at most one brief ad break between Shorts in the feed, shared across several creators, where a long-form video can carry pre-roll, mid-roll, and post-roll ads of its own. The model is structurally different, and the RPM gap follows from the model, not from any penalty.

      RPM already includes the two things creators most often try to add on top of it, so the tool does not ask for them. First, it already includes YouTube's share: RPM is what the creator receives, not what the advertiser paid. Second, it already includes the views that showed no ad. The median channel in the AIR study monetized about 53% of its views, which means nearly half of all views earned nothing at all, and that reality is baked into the RPM figure. Multiplying RPM by a monetized-view share would count the same discount twice. If your own channel monetizes far more or far fewer views than the median, your own RPM will show it, which is why entering your Studio RPM gives a tighter estimate than any niche preset.

      Worked example. Take the tool's defaults: a channel with 100,000 monthly long-form views and 50,000 monthly engaged Shorts views, using the All niches preset. Long-form at the all-niche median RPM of $2.30 pays 100,000 divided by 1,000, times $2.30, which is $230.00 per month. At the low end of the typical band, $1.00, the same views pay $100.00, and at the high end, $5.00, they pay $500.00. Shorts at the typical band of $0.07 to $0.20 pay 50,000 divided by 1,000, times $0.07 to $0.20, which is $3.50 to $10.00 per month, with a midpoint of $6.75. Add the two together and the monthly estimate is $236.75 at the median, in a range of $103.50 to $510.00. Over a year at the same pace, that is $2,841.00 at the median. The Shorts, for all that they are a third of the channel's views, supply under 3% of the median monthly estimate. That is the normal shape of a mixed channel, and it is why the tool keeps the two formats separate instead of blending them into one misleading average.

      Two more figures in the result deserve a word. The long-form views for $1,000 is 1,000,000 divided by the median RPM, rounded up to whole views: at $2.30 it is 434,783 views. The Shorts views to match 1,000 long-form views is the median long-form RPM divided by the midpoint Shorts RPM, times 1,000: at $2.30 against $0.135 it is 17,037 Shorts views.

      What your result means

      The headline of the result is a range, and the range is the point. A single number would pretend YouTube pays a rate, and it does not. Two channels in the same niche, with the same view count, routinely earn at rates several times apart, because their audiences live in different countries, watch in different months, and see different numbers of ads. The range shows you where most channels in your niche actually land. The median in the middle is the planning figure: half the channels in the niche earn more than it, half earn less.

      Read the split next. The bar under the headline shows how much of the median monthly estimate comes from long-form video and how much from Shorts. For most mixed channels the bar is almost all long-form, and that is normal. Shorts earn between 3% and 14% of what long-form earns per view in almost every niche, so even a channel whose views are mostly Shorts usually earns mostly from long-form. If your bar shows Shorts supplying a large share, check the inputs: either your Shorts volume is genuinely enormous, or you entered total Shorts views instead of engaged views, which inflates the Shorts side.

      The months-to-first-payout line answers the question new creators actually ask: when does money arrive? YouTube pays through AdSense for YouTube, and it pays only once your balance reaches $100. Earnings for a month are finalized between the 7th and the 12th of the following month, and if the balance has reached $100 by the 20th, payment goes out between the 21st and the 26th. Below $100, the balance rolls over. At the all-niche median RPM of $2.30, a channel needs about 43,500 long-form views for its first $100, and the tool's payout line tells you how many months that takes at your current pace. A channel earning $25 a month at the median rate waits 4 months for its first payment. That is normal, and it is worth knowing before you count on the money.

      The result also tells you what to do next, depending on where you sit. If your estimate is far below what you hoped, the lever is almost never more views of the same kind. The levers that move RPM are the audience country, the season, the share of views that show an ad, and the length of the videos, and they are covered in the section below on what decides your RPM. If your estimate is healthy, the next step is planning: creator income arrives unevenly, a good month followed by a quiet one, so build the budget on the low end of the range rather than the median. Our Budget Calculator is built for exactly that kind of irregular income. And if ads are a small part of your income, price the other parts properly: brand deals through our Sponsored Post Rate Calculator and TikTok Shop affiliate earnings through our TikTok Shop Affiliate Earnings Calculator. Many creators earn more from one brand deal than from a month of ads.

      Finally, compare the estimate with your real RPM. If your Studio RPM sits above the top of your niche range, you are doing something right: a valuable audience, long videos with mid-rolls, or a strong season. If it sits below the bottom, something is worth investigating: a large audience in low-paying countries, short videos with no mid-roll room, or a high share of unmonetized views. Either way, enter your real RPM and run the tool again.

      YouTube RPM by niche in 2026

      The table below is the heart of this tool. It comes from AIR Media-Tech, a company that works with YouTube channels and read the Studio analytics of 300 of its monetized channels for every monetized month from May 2025 to May 2026, a total of 3,595 channel-months. The figures are medians, not averages, so one breakout channel cannot drag a niche upward. The range column is the middle half of channels: a quarter of channels in the niche earned less than the low figure, and a quarter earned more than the high one. Four niches are marked directional because fewer than 10 channels in the sample belonged to them; their figures are useful guides, not precise measurements.

      NicheMedian RPMMiddle half of channelsLong-form views for $1,000
      Education and Science$10.22$2.31 to $19.50About 98,000
      Transport$5.69$3.17 to $9.81About 176,000
      Lifestyle$2.98$1.77 to $5.24About 336,000
      News and Politics$2.60$1.79 to $3.62About 385,000
      Entertainment$2.43$0.88 to $5.02About 412,000
      Crafting and Handmade$2.39$1.00 to $3.90About 418,000
      Gadgets and Tech$2.33$0.70 to $3.71About 429,000
      Music$2.28$1.35 to $4.16About 439,000
      Food and Cooking$2.25$1.50 to $3.11About 444,000
      Gaming$2.05$0.70 to $3.62About 488,000
      Business and Finance$2.01$0.73 to $5.17About 498,000
      Health and Sport$1.23$0.72 to $1.53About 813,000
      Kids and Teens$0.33$0.16 to $0.88About 3,030,000
      All niches$2.30$1.00 to $5.00 (typical band)About 435,000

      Source: AIR Media-Tech, 300 monetized channels, YouTube Studio data, May 2025 to May 2026, page updated 1 July 2026. Transport, News and Politics, Food and Cooking, and Business and Finance had fewer than 10 channels in the sample and are directional. The All niches band of $1.00 to $5.00 is the typical range most channels sit in, not a quartile range. Views for $1,000 are computed from the published medians (1,000,000 divided by the median RPM, rounded to the nearest thousand), so they may differ slightly from AIR's own rounded column, which uses unrounded medians.

      Three things in that table matter more than the ranking itself. The first is the gap between the top and the bottom. The median Education and Science channel earns $10.22 per 1,000 views, more than four times the all-niche median of $2.30 and roughly thirty times what the median Kids and Teens channel earns at $0.33. The same million views pays about $10,220 in one niche and about $330 in the other, on the same platform in the same year. Niche is the single biggest fact about a channel's earnings, which is why this tool asks for it before anything else.

      The second is the spread inside each niche, which is wider than the spread between most niches. In Education and Science, the top quarter of channels earns $19.50 per 1,000 views and the bottom quarter earns $2.31, a gap of more than eight times within one topic. In Gaming, the middle half runs from $0.70 to $3.62. A gaming channel at the top of its range earns more per view than a lifestyle channel at the bottom of its range. Niche sets the starting point. Everything else in the next section decides where inside the range a channel lands.

      The third is the surprise at the bottom of the top half. Business and Finance, the niche most people assume pays best, sits at a median of $2.01, below Gaming and barely above Health and Sport. The reason is the sample: fewer than 10 business channels, and finance advertisers who pay high CPMs but reach a narrow audience. The high CPM does not automatically become a high RPM, because RPM also depends on how many views show an ad at all. Gadgets and Tech shows the same lesson from the other side: its median Studio CPM of $5.73 is close to the top of the table, yet its RPM is only $2.33, because just 34% of its views served an ad, against 77% for Education and Science. A high CPM with a low monetized share loses to a moderate CPM with a high one.

      Two more facts from the same study put the table in perspective. The top 10% of the 300 channels earned 58% of all the ad revenue in the sample, while the bottom half shared 4% between them. And smaller channels did not earn less per view than large ones: channels with 10,000 to 100,000 subscribers recorded a median RPM of $2.14, while channels with 100,000 to 10 million subscribers recorded $2.04. Size buys total revenue, not a better rate. A small channel with a valuable audience earns more per view than a large channel with a cheap one.

      What decides your RPM

      If niche is the starting point, five forces decide where inside the niche range a channel lands. Understanding them matters more than memorizing the table, because three of them are at least partly in the creator's control.

      Audience country is the largest single force. Advertisers pay far more to reach viewers in the United States, Australia, and Western Europe than viewers in South Asia, Southeast Asia, or Latin America, and RPM follows the advertiser. The gap is visible most sharply in Shorts, where AIR's country table shows the United States at $0.328 per 1,000 engaged views against $0.008 for India and $0.012 for Indonesia, a forty-fold difference for the same content. Long-form shows the same pattern at higher values: channels with large audiences in Nigeria, Pakistan, or the Philippines, all publishing in English, receive far lower CPMs than channels with American, European, or Australian audiences. A channel cannot choose where its viewers live, but it can choose what it publishes: topics that attract an American or European audience pay more than the same topic aimed at a global English-speaking audience, and a creator who wonders why a twin channel earns more should compare audience geography first.

      Audience countryShorts RPM per 1,000 engaged viewsPer 1 million engaged Shorts views
      United States$0.328About $328
      Switzerland$0.205About $205
      Australia$0.193About $193
      South Korea$0.185About $185
      United Kingdom$0.166About $166
      Canada$0.165About $165
      Germany$0.163About $163
      New Zealand$0.113About $113
      Brazil$0.045About $45
      Mexico$0.040About $40
      Philippines$0.023About $23
      Indonesia$0.012About $12
      India$0.008About $8

      Source: AIR Media-Tech Shorts RPM by country, 274 channels, 12-month medians. Shorts RPM is shown here because the country gap is measured most cleanly for Shorts; the same geography effect drives long-form RPM.

      Season moves RPM by a third or more. Advertising budgets peak in the final quarter of the year, when retailers compete for holiday spending, and collapse in January when the budgets reset. Across the 300 channels, median RPM peaked in November at $2.35 and fell to $1.56 in January, about 34% lower. December CPM runs 40% to 60% higher than January. A channel that plans its year on a December RPM will be disappointed by February, and a channel that judges itself on a January RPM will undervalue itself by spring. Use a full-year median for planning, and expect the fourth quarter to run hot and the first quarter to run cold.

      The monetized share of views is the quiet multiplier. Not every view shows an ad. Viewers with ad blockers, viewers on YouTube Premium, viewers who skip before the ad loads, and viewers in countries with thin ad inventory all watch without generating ad revenue. The median channel monetized about 53% of its views, and the spread is wide: Education and Science monetized 77% of its views, Gadgets and Tech only 34%. Anything that raises the monetized share raises RPM directly. Longer videos help, because they carry more ad slots and more chances for an ad to serve. Videos that hold viewers past the first 30 seconds help, because the ad has time to play. Videos watched on television help, because the TV audience sees more ads and skips fewer of them.

      Video length decides the ad load. A video under 8 minutes can carry pre-roll ads and little else. A video over 8 minutes can carry mid-roll ads, placed by the creator or by YouTube, and each additional mid-roll is another paying slot. This is a large part of why Education and Science pays so well: long explainers with several mid-rolls, watched by an audience that stays to the end. It is also why a channel of two-minute clips earns a low RPM even in a good niche. Length alone does not pay, since a padded video loses viewers, but a video that earns its length earns more per view than a short one on the same topic.

      Advertiser competition sets the ceiling. RPM is high where many advertisers bid for the same viewers: financial products, software, education, and health products all compete hard, which lifts the auction price. It is low where few advertisers bid, or where regulation limits the ads that can run. Kids content is the extreme case: videos made for children cannot show personalized ads, which removes the most valuable advertising entirely, and that is why Kids and Teens sits at $0.33. News and Politics sits lower than its CPM suggests for a related reason: many advertisers avoid placing ads next to contentious news, which thins the auction.

      None of these five forces is fixed. A channel can lengthen its videos, pick topics with stronger advertiser demand, publish more in the fourth quarter, and build an audience in higher-paying countries by covering topics those audiences search for.

      Shorts: small money, big discovery

      Shorts are the most misunderstood income stream on YouTube, because the view counts are enormous and the payments are tiny. AIR Media-Tech's Shorts study, built on YouTube Analytics data from 274 channels and 3,044 channel-months, puts the median Shorts RPM at $0.07 to $0.20 per 1,000 engaged views in most niches. One million Shorts views from a United States-heavy audience earns about $300. The same million views from a mixed global audience typically earns $150 to $250. Across the whole dataset, Shorts RPM ran from $0.02 to $1.48 per 1,000 views, with the top end belonging to Music channels, whose Content ID revenue lifts their Shorts RPM to 41% to 60% of their long-form RPM, where every other niche sits at 3% to 14%.

      The comparison with long-form is stark. In most niches it takes 11,000 to 34,000 Shorts views to earn what 1,000 long-form views pay. A gaming channel earning $1.79 RPM on long-form and $0.17 on Shorts gets about 17 cents per 1,000 Shorts views against $1.79 per 1,000 long-form views, so one long-form view is worth roughly 10 Shorts views. For most channels in the study, Shorts supplied less than 2% of total revenue while taking a meaningful share of production time. Entertainment channels in the sample earned $559 a month where pure long-form channels in the same niche earned $2,979, with Shorts generating 26% of their traffic and 1.5% of their income.

      Shorts RPM also varies by niche, though the study had data for only some of them. Among medium-sized channels, with 100,000 to 10 million monthly views, Music led at $0.97, followed by Lifestyle at $0.16 to $0.20, Gaming at $0.15 to $0.17, Crafting at $0.11, Entertainment at $0.07 to $0.12, and Kids and Teens at $0.06 to $0.09. The study had no Shorts data for Education, which is itself a finding: the highest-paying long-form niche had no Shorts channels in the sample at all, and education channels that pivoted to Shorts saw the sharpest subscriber decline of any niche.

      None of this means Shorts are worthless. It means their value is not the direct payment. Shorts are a discovery tool: they bring viewers to the channel, and long-form video captures the revenue. AIR's case work found that the revenue Shorts generate comes from the long-form views that Shorts viewers go on to watch, not from the Shorts RPM itself, and six of the ten biggest subscriber gainers in September 2026 grew on Shorts. The mixed strategy the data supports is about one Short for every two or three long-form uploads, a Short ratio of 0.28 to 0.40, with one to five Shorts a month as the sweet spot where long-form RPM barely moves. Heavy Shorts pivots show consistent performance decline, and in Entertainment the same channels earned $4.58 RPM in months without Shorts and $1.84 in months with them, a 60% drop that may be correlation rather than cause, but is too consistent to ignore.

      One rule change makes the Shorts arithmetic sharper from February 1, 2027. From that date, a channel needs 10 million qualified Shorts views in the last 90 days to earn from the Shorts Creator Pool at all, and the requirement applies to channels already in the Partner Program. A channel with a million Shorts views a month clears 3 million in 90 days and falls below the bar, which means its Shorts earnings stop even though its long-form earnings continue. This tool flags that case with a warning when your quarterly Shorts views fall below 10 million. If Shorts are a small part of your income, the change costs little. If they are the whole business, it is a deadline to plan around, and the plan is long-form video.

      Getting into the YouTube Partner Program

      None of the earnings in this tool exist until a channel joins the YouTube Partner Program, and the bar for joining is about to rise. As of today, a channel needs 1,000 subscribers plus one of two performance routes: 4,000 qualified public watch hours in the last 12 months, or 10 million qualified public Shorts views in the last 90 days. The word that does the damage in that sentence is qualified. Watch time from Shorts viewed in the Shorts Feed does not count toward the 4,000 hours, private or unlisted views do not count, and views YouTube judges invalid are stripped out. A channel also needs an AdSense for YouTube account, two-step verification turned on, and no active Community Guidelines strikes, and it must follow the channel monetization policies.

      A lower tier opens earlier. With 500 subscribers, 3 valid public uploads in the last 90 days, and either 3,000 qualified watch hours in 12 months or 3 million qualified Shorts views in 90 days, a channel can turn on fan funding features such as channel memberships, Super Chat, and Super Thanks, plus YouTube Shopping. That tier pays 70% of net revenue to the creator, a better share than ads, but it is not ad revenue: the calculator on this page estimates ad and Premium revenue sharing, which needs the full 1,000-subscriber tier.

      On August 10, 2026, YouTube announced the first significant changes to the Partner Program since 2018, and they take effect on February 1, 2027. From that date, new creators applying for ad and Premium revenue sharing will need 8,000 qualified watch hours in the last 365 days, or 20 million qualified Shorts views in the last 90 days, still with 1,000 subscribers. The bar doubles. Channels already in the program keep their status and do not need to meet the new entry figures. YouTube asks creators to review and sign the updated terms in YouTube Studio, and the new terms take effect on February 1, 2027. The 500-subscriber fan funding tier does not change.

      The change with the widest reach is the new ongoing Shorts threshold. From February 1, 2027, every channel, including existing partners, needs 10 million qualified Shorts views in the trailing 90 days to draw from the Shorts Creator Pool in a given month. Fall below it and Shorts revenue sharing pauses, resuming automatically once the channel crosses 10 million again, while long-form earnings continue untouched. YouTube says it expects to pay creators more in 2027 than in 2026, and it is adding incentive programs, bonuses for YouTube Shopping, incentives for brand deals, and earnings boosts for starting trends, aimed at channels below the Shorts threshold. The details of those programs were still to come when this page was last reviewed, and they will be covered in the next review.

      For a new channel, the practical reading is simple: qualify before February 1, 2027, while the bar is still 4,000 hours. Eight thousand hours over 365 days averages about 22 hours of total viewer watch time a day, which is a serious audience, not a hobby audience. A channel that will not reach 4,000 hours by the end of January should plan for the 8,000-hour bar and build for it deliberately: longer videos, consistent uploads, and topics people search for. And a channel that qualifies through Shorts should know that the 20-million-view route is not the end of the climb: keeping Shorts earnings after February 2027 needs 10 million qualified Shorts views every 90 days, indefinitely. Long-form video remains the durable path. For more free calculators, including the tools for TikTok Shop affiliate earnings and sponsored post rates mentioned above, browse the Tools Elite homepage.

      Common mistakes to avoid

      Confusing CPM with RPM. CPM is what advertisers pay per 1,000 ad impressions, before YouTube takes its share and before the unmonetized views are counted in. RPM is what the creator receives per 1,000 views, after both. CPM is almost always higher than RPM, sometimes several times higher, and the CPM figures quoted online are usually advertiser estimates from third-party tools, which run higher than both your Studio CPM and your RPM. A channel that plans on a $12 CPM will be disappointed by a $2.30 RPM. Always plan on RPM, and always check which number a source is quoting before you believe it.

      Using a single famous RPM as your own. The internet is full of single-number claims about what YouTube pays, and most of them are one channel's best month, one niche's top quarter, or one country's peak season presented as a general rate. The honest range for long-form video runs from $0.33 to $10.22 at the niche medians, with the middle half of Education and Science alone spanning $2.31 to $19.50. Any tool or article that gives you one number for all of YouTube is wrong for most channels. Use the range, and use your own Studio RPM when you have it.

      Counting total Shorts views instead of engaged views. Shorts RPM is calculated on engaged views, the views YouTube counts for revenue sharing, and total Shorts views can be several times higher. Entering total views inflates the Shorts estimate by the same multiple. The engaged figure is in YouTube Studio. Use it, and expect the Shorts estimate to look small. It is small. That is the data, not an error in the tool.

      Blending long-form and Shorts views into one number. A channel with 100,000 long-form views and 900,000 Shorts views does not have a million views at one rate. It has 100,000 views at roughly $2.30 per 1,000 and 900,000 views at roughly $0.135 per 1,000, which is $230 plus $121.50, not $2,300. Blending the two formats is the most common arithmetic error, and it overstates income by an order of magnitude.

      Applying a monetized-view share on top of RPM. RPM already counts the views that showed no ad. The median channel monetizes about 53% of its views, and that discount is already inside the $2.30 median. Multiplying the result by 53% again would count the same discount twice and understate earnings by nearly half. If you want to account for your own monetized share, do it by entering your own RPM, which already reflects it.

      Planning on a December RPM. RPM peaks in the fourth quarter and bottoms in January, with a swing of about a third between the November median of $2.35 and the January median of $1.56. A budget built on December earnings will break by February. Plan on the full-year median, treat the fourth quarter as a bonus, and keep a buffer for the first quarter.

      Trusting ranges so wide they cannot be wrong. Some public estimators show earnings ranges that span a factor of sixteen, which makes them useless for planning: any real result falls inside, so they never look wrong and never help. This tool uses measured medians and the middle half of real channels instead, which is why its ranges are narrower and its answers are more useful.

      Forgetting the $100 payout threshold and the payment lag. Earnings for a month are finalized between the 7th and the 12th of the following month, and payment goes out between the 21st and the 26th only once the balance reaches $100. A channel earning $30 a month waits more than three months for its first payment, and the money arrives six to eight weeks after it was earned. Plan cash flow on the payout date, not the earnings date.

      Ignoring the February 1, 2027 changes. The doubled entry bar for new creators and the new 10-million-view Shorts threshold are already announced and already dated. A channel that plans to qualify in 2027 on the old numbers, or a Shorts channel that assumes its pool earnings continue at any volume, will be caught out. Check the thresholds against your own trajectory now, while there is still time to act on them.

      Treating ad revenue as the whole business. Ads are the most visible income stream and often not the largest. Memberships pay 70% to the creator, brand deals can exceed a month of ads in a single payment, and affiliate income scales with trust rather than views. A channel that only counts ads undervalues itself and misses the deals that pay best. Estimate each stream separately, and build the business on all of them.

      Frequently asked questions

      How much does YouTube pay per 1,000 views?

      YouTube pays no fixed rate per 1,000 views. Across 300 monetized channels measured by AIR Media-Tech from May 2025 to May 2026, the median long-form RPM was about $2.30 per 1,000 views, with Education and Science highest at $10.22 and Kids and Teens lowest at $0.33. Shorts pay far less, typically $0.07 to $0.20 per 1,000 engaged views. Your own rate depends on your niche, your audience country, the season, and how many of your views show an ad, so the honest answer is always a range, not a single number.

      How much money does 1 million views make on YouTube?

      At the all-niche median RPM of $2.30, 1 million long-form views earn about $2,300. The same million views earn about $10,220 in Education and Science and about $330 in Kids and Teens. One million Shorts views earn far less: about $300 from a United States-heavy audience and $150 to $250 from a mixed global audience. The format and the niche matter more than the view count, which is why this calculator keeps long-form and Shorts separate.

      How much do YouTube Shorts pay per 1,000 views?

      In AIR Media-Tech's study of 274 channels, median Shorts RPM was $0.07 to $0.20 per 1,000 engaged views in most niches, or 3% to 14% of what the same channels earned per long-form view. The United States paid most at $0.328 per 1,000 engaged views, while India paid $0.008. Music is the exception: Music channels earned $0.97 per 1,000 Shorts views at the medium tier, because Content ID revenue closes much of the gap. From February 1, 2027, a channel also needs 10 million qualified Shorts views in the last 90 days to earn from the Shorts Creator Pool at all.

      What is a good RPM on YouTube?

      A good RPM is one above the median for your niche. Across all niches the median is about $2.30, so a channel above $2.30 is doing better than half of all monetized channels. But the niche matters more than the overall figure: $2.30 is excellent for a Kids and Teens channel, whose median is $0.33, and poor for an Education and Science channel, whose median is $10.22. Compare your RPM with the middle half of your own niche in the table above, and remember that a United States-heavy audience and long videos with mid-roll ads push RPM up, while a global audience and short videos push it down.

      What is the difference between RPM and CPM?

      CPM is what advertisers pay per 1,000 ad impressions, before YouTube takes its share. RPM is what the creator receives per 1,000 views, after YouTube keeps 45% of long-form ad revenue and after the views that showed no ad are counted in. CPM is almost always higher than RPM, and the CPM figures quoted online are usually advertiser estimates that run higher than both your Studio CPM and your RPM. For planning what you will actually earn, RPM is the number that matters, and it is the number this calculator uses.

      How many views do you need to make $1,000 a month on YouTube?

      At the all-niche median RPM of $2.30, $1,000 a month takes about 435,000 long-form views. In Education and Science it takes about 98,000 views, and in Kids and Teens it takes about 3,030,000 views. From Shorts alone, $1,000 a month takes roughly 7.4 million engaged views at the $0.135 midpoint of the typical Shorts band. The tool shows the exact figure for your niche and your RPM in the worked steps under every result.

      Do you need to be in the YouTube Partner Program to earn money?

      Yes, for ad revenue. A channel needs 1,000 subscribers plus either 4,000 qualified watch hours in the last 12 months or 10 million qualified Shorts views in the last 90 days to join the full ad revenue tier. From February 1, 2027, new applicants will need 8,000 qualified watch hours or 20 million qualified Shorts views instead, while channels already in the program keep their status. A lower tier at 500 subscribers opens fan funding features such as memberships and Super Chat, which pay 70% to the creator, but it does not pay ad revenue.

      Why is my RPM lower than other channels in my niche?

      The most common reasons are audience geography, season, and the share of views that show an ad. Viewers in the United States, Australia, and Western Europe attract far higher advertiser bids than viewers in South Asia or Latin America, so two channels in the same niche can earn at rates several times apart. RPM also falls by about a third from November to January as advertising budgets reset. Short videos with no mid-roll ads, a high share of viewers using ad blockers, and a large YouTube Premium audience all lower RPM further. Check your audience geography and monetized view share in YouTube Studio: the answer is usually in one of those two reports.

      Sources

      Page history
      • — Pre-isBasedOn snapshot (YMYL authority, Nov 2026) (saleem891@gmail.com)
      • — Pre-IA-remap snapshot: category population (live application 22 Nov 2026) (saleem891@gmail.com)
      • — Published (saleem891@gmail.com)