Skip to content

Wedding Alcohol Calculator

Everyone on the guest list, including children and non-drinkers. The drinking ratio below sorts out who drinks.

How long the bar is open, from the first pour to last call. Include the cocktail hour and any after-party you are supplying.

The share of guests who will drink alcohol. About 80% is the usual planning figure; lower for a brunch or a dry-leaning family.

The catering rule is 1 drink per drinking guest per hour. Use 0.75 for a light crowd and 1.25 for a lively one.

Guests arrive thirsty, so many caterers plan 2 drinks in the first hour and 1 per hour after. Tick this to add one extra drink per drinking guest for the first hour.

Drink split (beer, wine, spirits)

The classic full-bar split is 40% beer, 40% wine, 20% spirits. The Knot now recommends 50% liquor, 25% beer, 25% wine for a cocktail crowd.

The three shares must add to 100%.

Beer format

Cans and bottles come in cases of 24. A half-barrel keg serves 165 beers; any remainder comes in cases.

Wine format

A 750 ml bottle pours 5 glasses; a 3-liter box pours 20. Bottles come in cases of 12.

Spirits format

A 750 ml bottle pours 17 drinks at 1.5 oz each; a 1.75-liter handle pours 40.

Spirits to stock

Spirit drinks are split evenly across the types you pick. Each type needs at least one whole bottle, so fewer types means fewer bottles.

Extra drinks on top of the estimate, for a thirstier crowd, generous pours, or spills. 10% is the usual safety net.

Cost estimate (optional)

Enter the prices you were quoted. Leave a price blank to skip it; the estimate appears only when every price it needs is entered. The tool holds no prices and fetches none.

Wedding bar plan

Printable shopping list

    How the plan was worked out

        This tool estimates how much alcohol to buy for a wedding from the numbers you enter, for planning guidance only. It is not a recommendation to drink. The estimate uses standard catering rules of thumb and standard drink sizes, and actual consumption varies with your guests, your venue, and your pour sizes. Check your venue rules and local laws on serving alcohol, and arrange rides home for guests who drink.
        For a typical wedding, plan one drink per drinking guest per hour of reception, plus a 10 percent buffer. For 100 guests over five hours with 80 percent drinking, that is 440 drinks: 8 cases of beer, 36 bottles of wine, and 8 bottles of spirits, with 100 pounds of ice and 484 cups. Enter your guest count, hours, drinking ratio, and split above for your shopping list.

        Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

        How to use the Wedding Alcohol Calculator

        Enter your guest count and the number of hours the bar will be open, then set the drinking ratio: the share of guests who will drink alcohol. The default is 80 percent, which fits a typical mixed-age wedding. Next, choose a drinking pace. One drink per guest per hour is the standard catering rule, and the calculator offers quick presets for a light crowd (0.75), an average crowd (1), and a festive crowd (1.25). If you expect a busy first hour, tick the box to double the first hour, which adds one extra drink per drinking guest for the opening hour.

        Then pick how the drinks split between beer, wine, and spirits. The balanced preset uses 40 percent beer, 40 percent wine, and 20 percent spirits, which suits a classic full bar. The cocktail preset leans on spirits at 25 percent beer, 25 percent wine, and 50 percent spirits, while beer and wine only uses 50 percent beer and 50 percent wine with no spirits at all. Wine-forward uses 30 percent beer, 50 percent wine, and 20 percent spirits. If none of those fit your crowd, choose custom and enter your own percentages, as long as they add up to 100.

        Choose your formats: beer by the case of cans or bottles, or by the half-barrel keg; wine by the bottle or by the 3 liter box; spirits by the 750 ml bottle or by the 1.75 liter handle. Pick which spirit types you plan to stock, from vodka, whiskey, tequila, gin, and rum. Enter your prices per case, keg, bottle, or handle if you want a cost estimate, and set a buffer. The default buffer is 10 percent, which covers breakage, generous pours, and guests who stay longer than planned. The calculator shows the total drinks, the cases, bottles, kegs, and handles to buy, the ice and cups, a cost estimate if you entered prices, and a printable shopping list.

        How much alcohol do you need for a wedding?

        The core formula is simple: drinking guests times hours times drinks per guest per hour, plus a buffer. The Knot, in its wedding alcohol guide, quotes the standard advice from a professional bartender: assume each guest will drink one drink per hour, or about five drinks over the course of an evening. A five-hour reception with 100 drinking guests therefore needs about 500 drinks before any buffer. That average smooths out the real shape of an evening. Guests drink fastest in the first hour, slow down during dinner when food is served, and pick up again when the dancing starts. The one-drink-per-hour rule is the average across all of that, and it is the number most planners start from.

        The drinking ratio matters as much as the pace. Children, guests who do not drink, and guests who are driving will not touch the bar, and counting them as drinkers is the most common way couples overbuy. The calculator defaults to 80 percent, which matches the usual planning figure of about one guest in five not drinking. If your guest list has many children or older relatives, or a large group of non-drinkers, lower it. If your crowd is young and the bar runs late, raise it toward 90 or 100 percent. The buffer is your safety margin on top of the estimate. Ten percent is a sensible default. If your store takes back unopened bottles, a bigger buffer costs you nothing but a return trip. If returns are not allowed, keep the buffer small and buy the extra bottles only if you can use them later.

        The standard drink sizes behind the math

        Every number in this calculator is built on the standard drink defined by the National Institute on Alcohol Abuse and Alcoholism, NIAAA. One standard drink holds about 14 grams, or 0.6 fluid ounces, of pure alcohol. That is the amount in a 12 ounce can of regular beer at about 5 percent alcohol, a 5 ounce glass of table wine at about 12 percent, and a 1.5 ounce shot of distilled spirits at about 40 percent. Because all three hold the same amount of alcohol, the calculator can count them all as one drink each and then convert the total into bottles, cases, and kegs.

        ContainerServings
        750 ml bottle of wine5 glasses of 5 ounces each
        750 ml bottle of spirits17 pours of 1.5 ounces each
        1.75 liter handle of spirits40 pours of 1.5 ounces each
        Case of beer, 24 cans or bottles24 servings of 12 ounces each
        Half-barrel keg, 15.5 gallonsAbout 165 servings of 12 ounces each
        3 liter box of wineAbout 20 glasses of 5 ounces each
        750 ml bottle of champagne6 toast pours of 4 ounces each

        The keg figure comes from the University of Virginia Gordie Center, which lists a half-barrel keg at 165 twelve-ounce servings and a pony keg at 82. NIAAA lists a 750 ml bottle of spirits at 17 standard drinks and a 750 ml bottle of wine at 5. A handle holds 1.75 liters, which works out to about 39.4 pours at 1.5 ounces; the calculator rounds that to 40, and the default 10 percent buffer covers the small gap. Pour sizes vary in real life. A heavy-handed home pour can turn 17 drinks per bottle into 12 or 13, which is another reason to keep a buffer and to hire a bartender if your budget allows.

        How much beer to buy for a wedding

        Beer is sold by the case of 24 cans or bottles, and the calculator rounds up to whole cases, because a store will not sell you a third of a case. For 100 guests over five hours at the balanced split, the beer share is 176 servings, which is 7.33 cases, so you buy 8 cases. If your crowd leans toward beer, raise the beer share with the custom split and the case count follows. Light beer and craft beer count the same way in this calculator, one 12 ounce serving per drink, although a strong craft beer holds more alcohol than a light lager, so guests tend to drink fewer of them.

        Kegs change the math. A half-barrel keg pours about 165 twelve-ounce servings, so it suits larger weddings and beer-heavy crowds. The calculator fills whole kegs first and covers the leftover servings with cases, so 223 beer servings becomes 1 keg plus 3 cases, not 2 kegs. That keeps you from paying for a second keg when you only need 58 more servings. If your beer total is below one full keg, the calculator warns you, because a keg plus a tap rental can cost more than the equivalent cases and you cannot return a tapped keg. Kegs also need to stay cold from delivery to the last pour, so check that your venue has the space and the ice before you commit.

        How much wine to buy for a wedding

        A 750 ml bottle of wine pours five 5 ounce glasses, and a case holds 12 bottles, or 60 glasses. For 100 guests over five hours at the balanced split, the wine share is 176 glasses, which is 35.2 bottles, so you buy 36 bottles, exactly 3 cases. The calculator rounds up to whole bottles, then shows the case count so you can check for a case discount. Many stores discount a full case, so a total just short of a case boundary is often worth rounding up to the full case anyway.

        Boxes are the budget option. A 3 liter box holds about 20 glasses, the same as four bottles, and the wine stays fresh for weeks after opening, so leftovers are not wasted. The calculator offers boxes as a format for the wine share. If you serve both red and white, a common starting point is half red and half white, adjusted for the season and the menu. Summer weddings and light menus lean white, winter weddings and red meat lean red. The calculator counts wine as one total, so split the bottle count between red and white yourself once you have it.

        How much liquor to buy for a wedding

        A 750 ml bottle of spirits pours 17 drinks at the standard 1.5 ounce measure, and a 1.75 liter handle pours about 40. The calculator divides the spirit drinks evenly across the types you select, then rounds each type up to whole bottles. That rounding is why stocking five types costs more bottles than stocking one. For 88 spirit drinks across five types, each type gets 17 or 18 drinks, which is 2 bottles for three types and 1 bottle for two types, 8 bottles in total. The same 88 drinks in a single type would need only 6 bottles. The calculator warns you when the split costs extra bottles, so you can decide whether the variety is worth it.

        The cheapest way to cut the liquor bill is to offer fewer types. A signature cocktail plus vodka and whiskey covers most guests and keeps the bottle count down. Handles are usually cheaper per drink than 750 ml bottles, so choose handles for the spirits your crowd drinks most. The champagne toast is not counted in the calculator total, because it is a separate pour served to every guest at once. Plan about one 750 ml bottle per 6 guests for the toast, which is 17 bottles for 100 guests, and buy the toast wine separately from the bar wine.

        How much ice and how many cups

        Ice does two jobs, and the amount depends on which jobs it has. Feastimate, in its ice guide, puts the rule at 1 pound per guest when ice only goes into glasses, and 2 pounds per guest once you are also chilling bottles and cans in coolers or tubs. The calculator uses the 1 pound per guest figure and sells it in 10 pound bags, so 100 guests need 100 pounds, or 10 bags. If your drinks sit in coolers, double the figure. In summer heat, add about 30 percent more again, because ice melts faster than guests drink. Pre-chilling every bottle and can in a fridge the night before cuts the ice you need by a third or more, because cold drinks do not melt the ice that is meant to serve them.

        Cups follow the drink count. Plan one cup per drink plus 10 percent spare for drops, refills, and guests who lose their cup. For 440 drinks, that is 484 cups, sold in packs of 50, so 10 packs. If your venue uses real glassware, the cup count still helps, because it tells you how many glasses the bar will wash and reuse across the evening. Mixers run at about 1 liter per 8 spirit drinks, with 1 lime per 8 spirit drinks and 1 lemon per 10. Those are planning figures for a full bar. A beer and wine only reception needs no mixers at all, and a single signature cocktail may need far less than the full-bar figure, so adjust the shopping list to your menu.

        A worked example

        Take a wedding with 100 guests, a five-hour reception, 80 percent of guests drinking, one drink per guest per hour, the balanced split of 40 percent beer, 40 percent wine, and 20 percent spirits, and a 10 percent buffer. First, the drinking guests: 100 times 80 percent is 80. Then the base drinks: 80 drinking guests times 5 hours times 1 drink per hour is 400. Then the buffer: 400 times 1.10 is 440 drinks in total.

        The split divides 440 drinks into 176 beer servings, 176 glasses of wine, and 88 spirit drinks. Beer: 176 servings divided by 24 per case is 7.33, rounded up to 8 cases. Wine: 176 glasses divided by 5 per bottle is 35.2, rounded up to 36 bottles, which is exactly 3 cases. Spirits: 88 drinks across five types is 18, 18, 18, 17, and 17 drinks per type, which needs 2, 2, 2, 1, and 1 bottles, 8 bottles in total. Ice: 100 pounds, or 10 bags of 10 pounds. Cups: 440 drinks times 1.10 is 484 cups, or 10 packs of 50. Mixers: 88 spirit drinks divided by 8 is 11 liters, with 11 limes and 9 lemons.

        With prices of 18.99 dollars per case of beer, 12.50 dollars per bottle of wine, and 24.99 dollars per bottle of spirits, the cost is 151.92 dollars for beer, 450.00 dollars for wine, and 199.92 dollars for spirits, a total of 801.84 dollars. That estimate covers alcohol only. Ice, cups, mixers, tax, and tips are extra. A keg example shows the other format: 150 guests, six hours, 90 percent drinking, the cocktail split, and a 10 percent buffer gives 891 drinks, of which 223 are beer. That fills 1 keg of 165 servings and leaves 58 servings, which is 3 cases. The 445 spirit drinks need 15 handles.

        How to save money on wedding alcohol

        The biggest saving is the simplest: serve beer and wine only. Dropping spirits removes the most expensive bottles and the mixers, limes, and lemons that go with them, and many guests will not miss the full bar. A keg instead of cases saves money when your beer total clears a full keg, and buying wine by the case often earns a discount. A single signature cocktail gives guests a mixed drink option without stocking five spirit types, and it keeps the bottle count close to the single-type minimum.

        Buy early and in bulk where you can, and ask every store about returns before you buy. Some stores take back unopened bottles, which makes a generous buffer free. Others do not, and in some states returning alcohol is not legal at all, so check the local rules before you plan on returns. If your venue charges a corkage fee per bottle, add it to the cost estimate yourself, because the calculator does not know your venue fee. And when the bar bill is set, the budget calculator can fold it into the whole wedding budget, and the tip calculator can work out the bartender tip, so the bar does not surprise you on the night.

        Frequently asked questions

        How much alcohol do I need for 100 guests?

        For 100 guests over five hours, with 80 percent drinking and one drink per guest per hour plus a 10 percent buffer, plan for 440 drinks: 176 beer servings, or 8 cases of 24, 176 glasses of wine, or 36 bottles, and 88 spirit drinks, or 8 bottles of 750 ml when five spirit types are stocked. Add 100 pounds of ice and 484 cups.

        How many drinks per guest per hour should I plan for?

        One drink per guest per hour is the standard catering rule, quoted by The Knot from a professional bartender, and it works out to about five drinks per guest over a five-hour reception. Use 0.75 per hour for a light crowd, 1.25 for a festive crowd, and tick the doubled first hour option if you expect guests to drink two in the opening hour.

        How many bottles of wine do I need for 100 guests?

        It depends on how much of the total is wine. At the balanced split, 100 guests over five hours need 176 glasses of wine, which is 36 bottles of 750 ml, or 3 cases of 12. If wine is the only drink served, the same reception needs 440 glasses, which is 88 bottles. A 750 ml bottle pours five 5 ounce glasses.

        How many kegs do I need for a wedding?

        A half-barrel keg holds about 165 twelve-ounce servings. Divide your beer servings by 165 and round up for the keg count, then cover any leftover servings with cases. For 223 beer servings, that is 1 keg plus 3 cases. If your beer total is below 165 servings, cases are usually cheaper and easier than a keg, because a tapped keg cannot be returned.

        How much ice do I need for a wedding?

        Plan 1 pound of ice per guest when ice only goes into glasses, and 2 pounds per guest when you are also chilling bottles and cans in coolers or tubs. For 100 guests, that is 100 pounds, or 10 bags of 10 pounds, for glasses only. In summer heat, add about 30 percent more. Pre-chilling the drinks in a fridge the night before cuts the ice you need by a third or more.

        How many cups do I need for a wedding?

        Plan one cup per drink plus 10 percent spare for drops and refills. For 440 drinks, that is 484 cups, or 10 packs of 50. If your venue uses real glassware, the same number tells you how many glasses the bar will wash and reuse across the evening.

        Should I buy extra alcohol for a wedding?

        Yes, a buffer of about 10 percent covers breakage, generous pours, and guests who stay longer than planned. Running out of alcohol is worse than having a few bottles left over. If your store takes back unopened bottles, a bigger buffer costs nothing but a return trip. If returns are not allowed, keep the buffer small and buy only what you can use later.

        How can I save money on wedding alcohol?

        Serve beer and wine only, which removes the most expensive bottles and the mixers. Use kegs when your beer total clears a full keg. Buy wine by the case for a discount. Offer one signature cocktail instead of a full bar with five spirit types, because each extra type needs at least one whole bottle. Ask every store about returns before you buy, and check your venue corkage fee.

        Sources

        The catering assumptions in this calculator come from published guides and official drink-size tables. The Knot, in its wedding alcohol calculator guide, quotes the one drink per guest per hour rule and the current recommended mix of 50 percent liquor, 25 percent beer, and 25 percent wine, and lists six drinks per 750 ml bottle of champagne. The National Institute on Alcohol Abuse and Alcoholism defines the standard drink as 14 grams of pure alcohol, the amount in 12 ounces of beer, 5 ounces of wine, or 1.5 ounces of spirits, and lists 17 standard drinks in a 750 ml bottle of spirits and 5 in a 750 ml bottle of wine. The University of Virginia Gordie Center lists a half-barrel keg at 165 twelve-ounce servings and a pony keg at 82. Feastimate puts the ice rule at 1 pound per guest for glasses only and 2 pounds per guest when coolers are involved.

        Planning the rest of the wedding? A wedding vendor tip calculator is coming soon to Tools Elite, to work out tips for your bartender, caterer, photographer, and other vendors. Until then, the tip calculator covers the bartender tip, and the budget calculator folds the bar into your whole wedding budget. Browse more free tools on the Tools Elite homepage.