Area Calculator
Five shapes, one calculator. Pick a shape, type its measurements, and the area updates as you type. Measure in feet and inches or in meters. One foot is exactly 0.3048 meters, so one square foot is exactly 0.09290304 square meters, and one acre is 43,560 square feet. Figures reviewed 20 November 2026.
Area
Working, step by step
Flooring, paint, and concrete all start from this number. Our Tile Calculator turns square feet into boxes of tile, our Paint Coverage Calculator turns wall area into gallons, and our Concrete Calculator turns a slab area into cubic yards.
Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.
How to use the Area Calculator
Pick the shape that matches what you are measuring: rectangle, circle, triangle, trapezoid, or L-shaped area. Then type in the measurements. The answer updates as you type, so there is nothing to submit and no button to press, although the Calculate area button is there if you want it.
Measure in feet and inches or in meters, whichever your tape measure uses. In feet mode, each measurement has two boxes: feet and inches. A wall that measures 12 feet 6 inches goes in as 12 in the feet box and 6 in the inches box. In meters mode, each measurement has one box, and you can type decimals, such as 3.66. Switching units converts the numbers you already typed, so nothing is lost when you change your mind.
For a circle, you can measure by radius or by diameter. The radius runs from the center to the edge; the diameter runs across the whole circle through the center. If you measured across the whole circle, pick Diameter and the calculator halves it for you. For a triangle or a trapezoid, the height is the straight-up distance at a right angle to the base, not the length of a slanted side.
The answer appears in square feet and square meters, with square inches, square centimeters, square yards, acres, and hectares alongside. The formula used and every step of the working are shown below the answer, so you can check the arithmetic yourself or copy it into homework. For an L-shaped area, each rectangle is shown separately before the two are added together.
A few limits keep the answers sensible. Every measurement must be more than zero and no more than 100,000 in the unit you picked. Areas are rounded to 4 decimal places, acres to 6 places, and square inches and square centimeters to 2 places, at the final step only. Every step before that works with the full numbers.
Area formulas for each shape
Area is the amount of two-dimensional space inside a shape, measured in square units. You can always think of it as the number of squares needed to fill the shape completely: a rectangle 5 feet by 4 feet holds twenty 1-foot squares, so its area is 20 square feet. The formulas below are the standard ones taught in school mathematics, and each one is shown with a worked example. The method follows the LibreTexts Technical Mathematics textbook, which gives the same formulas for rectangles, triangles, trapezoids, and circles.
Rectangle: area = length × width
A rectangle is a four-sided shape with four right angles. Its area is the length times the width. A room 12 feet long and 10 feet wide covers 12 × 10 = 120 square feet. A square is a rectangle with all sides equal, so a square with sides of 4 meters covers 4 × 4 = 16 square meters. To convert the 120 square foot room to square meters, multiply by 0.09290304: 120 × 0.09290304 = 11.1484 square meters. The rectangle formula is the one you will use most often, because most rooms, yards, lawns, and lots are rectangles, or close enough to be treated as rectangles.
Circle: area = π × radius × radius
A circle has no straight sides, so its area uses pi, the ratio of a circle's circumference to its diameter. The formula is pi times the radius squared: area = π × r². A circle with a radius of 5 feet covers 3.14159 × 5 × 5 = 78.5398 square feet. Because pi goes on forever, the area of a circle is always an approximation, and this calculator uses pi to full double precision, far more digits than any tape measure can justify. If your textbook tells you to use 3.1416 for pi, the answers agree to 4 decimal places for the sizes in this article. If you measured the diameter instead of the radius, divide it by 2 first: a circle with a diameter of 14 feet has a radius of 7 feet, so its area is 3.14159 × 7 × 7 = 153.938 square feet.
Triangle: area = 1/2 × base × height
Any triangle can be doubled to form a parallelogram, so a triangle is exactly half the area of a parallelogram with the same base and height. The formula is one-half times the base times the height: area = 1/2 × b × h. A triangle with a base of 10 feet and a height of 6 feet covers 1/2 × 10 × 6 = 30 square feet. The height must be perpendicular to the base, measured at a right angle. The slanted sides are not the height, and they do not enter the formula at all. The LibreTexts textbook makes the point with a triangle whose base is 28 feet, whose height is 15 feet, and whose slanted sides are 17 feet and 25 feet: the area is 1/2 × 28 × 15 = 210 square feet, and the 17 and the 25 are never used. For a right triangle, the two legs that meet at the right angle are the base and the height, so the formula is especially easy.
Trapezoid: area = 1/2 × (base 1 + base 2) × height
A trapezoid has exactly one pair of parallel sides, called the bases. Its area is one-half times the sum of the two bases times the height: area = 1/2 × (b1 + b2) × h. You can think of it as the average of the two bases times the height. A trapezoid with parallel sides of 10 feet and 6 feet and a height of 4 feet covers 1/2 × (10 + 6) × 4 = 1/2 × 16 × 4 = 32 square feet. The textbook gives a trapezoid with bases of 12 meters and 6 meters and a height of 4 meters, which covers 1/2 × (12 + 6) × 4 = 36 square meters. The same book has a real-world example: benches at Hot Lake Springs in Oregon are trapezoids with an outer edge of 33 inches, an inner edge of 23 inches, and the edges 11 inches apart, so each bench covers 1/2 × (33 + 23) × 11 = 308 square inches, and seven benches together provide 7 × 308 = 2,156 square inches of seating. As with a triangle, the height is the perpendicular distance between the parallel sides, not the length of a slanted side.
L-shaped area: split into two rectangles and add
An L-shaped room or yard has no single formula, because it is not one simple shape. The standard method is to split it into two rectangles, work out each rectangle, and add the two areas together. Take an L-shaped room whose main part is 20 feet by 12 feet and whose smaller part is 8 feet by 6 feet. The main part covers 20 × 12 = 240 square feet, the smaller part covers 8 × 6 = 48 square feet, and the whole room is 240 + 48 = 288 square feet. The split only works if the two rectangles do not overlap: draw the dividing line on a sketch first, and check that every part of the floor belongs to exactly one rectangle. The same idea works for any irregular shape: split it into rectangles and triangles, add the parts, and subtract any part that sticks out beyond the shape.
When to use each shape
Most everyday measuring is rectangles. Rooms, floors, walls, ceilings, lawns, garden beds, patios, decks, and rugs are rectangles, or close enough that a rectangle is the right model. If you are buying flooring, tile, paint, or sod, the rectangle formula is the one you need: measure the length and the width, multiply, and you have the area to cover. Our Tile Calculator takes that square footage and turns it into boxes of tile, and our Paint Coverage Calculator turns wall area into gallons of paint.
Circles come up with round tables, round rugs, circular patios, fire pits, tree beds, and sprinkler coverage. A sprinkler that throws water 10 feet in every direction waters a circle with a radius of 10 feet, or about 314.1593 square feet. Triangles appear in gable ends, sloped ceilings, triangular garden beds, and roof sections. Trapezoids show up wherever a space narrows: a yard that is wider at the street than at the back, a deck that follows a fence line, or a bay window. L-shaped areas are common in real houses, where a living room wraps around a hallway or a kitchen extends into a dining nook. If the room is not a clean rectangle, the L-shape option is almost always the right choice, and it beats guessing.
Irregular and L-shaped areas
Real rooms are rarely perfect rectangles. Alcoves, bay windows, closets, and hallway extensions all break the rectangle, and the fix is always the same: split the shape into pieces you can measure, work out each piece, and add them up. Sketch the room on paper first, then draw lines that cut it into rectangles and triangles. Number the pieces, measure each one, and write the measurements on the sketch. Then add the areas. If a piece is missing, such as a fireplace that juts into the room, subtract its area instead.
Two habits make the splitting method reliable. First, measure each piece at its widest and longest points, and always measure at right angles: a rectangle's sides meet at 90 degrees, so measure length along one wall and width along the wall next to it. Second, check that your pieces add up to the whole shape with no gaps and no overlaps. A quick sense check is to measure the whole room as one big rectangle and confirm that your split total is smaller than that big rectangle, which it must be if the room is L-shaped. If the split total is bigger, two pieces overlap somewhere. For a room with a curved wall or a diagonal corner, approximate the curve with a triangle or a rectangle and note that the answer is approximate.
When the area is for buying material, add a waste allowance on top of the measured area. Tile and flooring usually need 10 percent extra for cuts and breakage, and patterned tile can need 15 percent. That is a separate step after the area calculation: a 288 square foot room at 10 percent waste needs 288 × 1.10 = 316.8 square feet of material. Our Percentage Calculator works out the waste allowance, and the Concrete Calculator turns a slab area into cubic yards of concrete, including the extra for spillage.
Unit conversions
Area conversions are easy to get wrong, because the conversion factor gets squared along with the unit. One foot is exactly 0.3048 meters, so one square foot is 0.3048 × 0.3048 = 0.09290304 square meters, not 0.3048 square meters. The same trap applies to inches: one square foot is 144 square inches, because 12 × 12 = 144, not 12. Whenever you convert an area, square the length conversion factor first.
| From | To | Multiply by |
|---|---|---|
| 1 square foot | square meters | 0.09290304 |
| 1 square meter | square feet | 10.7639 |
| 1 square foot | square inches | 144 |
| 1 square meter | square centimeters | 10,000 |
| 1 square foot | square yards | 0.1111 |
| 1 square meter | square yards | 1.196 |
| 1 acre | square feet | 43,560 |
| 1 acre | square meters | 4,046.8564224 |
| 1 hectare | square meters | 10,000 |
| 1 hectare | acres | 2.4711 |
The foot-to-meter conversion is exact, not approximate. The 1959 international yard and pound agreement defined the yard as exactly 0.9144 meters, which makes the foot exactly 0.3048 meters. The National Institute of Standards and Technology confirms that 1 foot is 0.3048 meter exactly, and that the older US survey foot, which was about 0.30480061 meters, was retired at the end of 2022 and should now be used only for historic and legacy work. Because the length conversion is exact, the area conversion is exact too: one square foot is exactly 0.09290304 square meters, and one acre is exactly 4,046.8564224 square meters.
An acre is 43,560 square feet, or 4,840 square yards. It comes from old surveying units: a strip one chain wide and one furlong long, where a chain is 66 feet and a furlong is 660 feet, so 66 × 660 = 43,560. An acre is an area, not a shape, so any parcel totaling 43,560 square feet is one acre, whatever its outline. As a square, an acre measures about 208.71 feet on each side, and 640 acres make one square mile. For quick conversions between area units without the geometry, our Unit Converter handles length, area, and volume in one place.
Common mistakes to avoid
The most common mistake is mixing units. If the length is in feet and the width is in inches, the product is meaningless until both are in the same unit. Convert first: 12 feet 6 inches is 12.5 feet, not 12.6 feet, because 6 inches is half a foot. The calculator's feet-and-inches boxes handle this for you, but on paper it is the error that bites most often. The same rule applies to meters and centimeters: 3 meters 50 centimeters is 3.5 meters.
The second mistake is using a slanted side as the height of a triangle or a trapezoid. Height is always the perpendicular distance, measured at a right angle to the base. On a sloped roof section, the slanted edge is longer than the height, so using it inflates the area. The third mistake is using the diameter as the radius of a circle, which makes the area four times too big, because the radius is squared: doubling the radius quadruples the area. Always halve the diameter first.
The fourth mistake is forgetting the one-half in the triangle and trapezoid formulas. A triangle is half of a parallelogram, so skipping the half doubles the answer. The fifth mistake is measuring an L-shaped room as one big rectangle, which counts floor that is not there. Split it instead. The sixth mistake is rounding too early: round only at the end, after every multiplication and division, because rounding an intermediate number carries the error into the final answer. The calculator rounds only at the final step for exactly this reason.
Frequently asked questions
How do you calculate the area of a rectangle?
Multiply the length by the width. A room 12 feet long and 10 feet wide covers 12 × 10 = 120 square feet. Measure both sides in the same unit, and the answer comes out in square units: feet give square feet, meters give square meters.
How do you calculate the area of a circle?
Multiply pi by the radius squared: area = π × r². A circle with a radius of 5 feet covers 3.14159 × 5 × 5 = 78.5398 square feet. If you measured the diameter instead, divide it by 2 first to get the radius.
How do you calculate the area of a triangle?
Multiply one-half by the base by the height: area = 1/2 × base × height. A triangle with a base of 10 feet and a height of 6 feet covers 1/2 × 10 × 6 = 30 square feet. The height must be measured at a right angle to the base, not along a slanted side.
How do you calculate the area of a trapezoid?
Add the two parallel sides, multiply by the height, and take half: area = 1/2 × (base 1 + base 2) × height. A trapezoid with parallel sides of 10 feet and 6 feet and a height of 4 feet covers 1/2 × 16 × 4 = 32 square feet.
How do you find the area of an irregular shape?
Split the shape into rectangles, triangles, and other simple shapes, work out each part, and add the parts together. An L-shaped room is two rectangles: a 20 by 12 foot part covers 240 square feet and an 8 by 6 foot part covers 48 square feet, so the whole room is 288 square feet.
How many square feet are in a square meter?
One square meter is 10.7639 square feet, and one square foot is 0.09290304 square meters. The conversion is exact, because one foot is defined as exactly 0.3048 meters, so one square foot is 0.3048 × 0.3048 = 0.09290304 square meters.
How many square feet are in an acre?
One acre is 43,560 square feet, or 4,840 square yards, or 4,046.8564224 square meters. As a square, an acre measures about 208.71 feet on each side. An acre is an area, not a shape, so any parcel totaling 43,560 square feet is one acre.
What is the difference between area and perimeter?
Area measures the surface a shape covers, in square units, while perimeter measures the distance around the outside, in linear units. A 12 by 10 foot rectangle has an area of 120 square feet and a perimeter of 44 feet. Doubling every side quadruples the area but only doubles the perimeter.
Sources
The formulas, worked examples, and unit definitions on this page follow standard school mathematics, checked against the references below. All sources were accessed on 20 November 2026.
- LibreTexts — Area of Polygons and Circles, Technical Mathematics 2e, published 12 May 2024: rectangle A = lw, triangle A = 1/2 bh with the height perpendicular to the base, trapezoid A = 1/2 h(b1 + b2), circle A = πr² with pi about 3.1416, and the worked examples used on this page, including the 28 by 15 foot triangle, the 12 and 6 meter trapezoid, and the Hot Lake Springs benches.
- National Institute of Standards and Technology — U.S. Survey Foot: 1 foot is 0.3048 meter exactly, the US survey foot was superseded by the international foot from 1 January 2023 and should now be used only for historic and legacy applications, and the acre is among the units redefined in terms of the international foot.
- Federal Register — Deprecation of the United States (U.S.) Survey Foot, 17 October 2019: the 1959 international agreement that defined the yard as exactly 0.9144 meters and the foot as exactly 0.3048 meters, and the decision to deprecate the US survey foot on 31 December 2022.
For more measuring tools, see the Rug Size Finder for choosing a rug that fits a room, the Fraction Calculator for tape-measure fractions, the Scientific Calculator for the arithmetic behind these formulas, or browse all tools on the Tools Elite homepage.