Paint Coverage Calculator



Paint Coverage Calculator

Enter your room measurements and this calculator works out how much paint to buy, in gallons and quarts, with a primer estimate for new drywall.




Measure floor to ceiling. Most rooms are 8 feet.



Standard door: 3 by 7 feet, 21 sq ft. Change it if your doors are larger or smaller.



Standard window: 3 by 5 feet, 15 sq ft. Change it if your windows are larger or smaller.


Two coats is standard for most repaints. Use three for a big color change.


Smooth, previously painted walls typically cover 350 to 400 sq ft per gallon.


Check the label on your paint can. Most interior paints list 350 to 400 sq ft per gallon.


Covers spills, roller loss and touch-ups. 10% is a common allowance.


Enter the price from your store if you want an estimated cost. No prices are stored or looked up.


Your estimate

Paintable wall area
Area to cover (all coats)
Paint needed (exact)
Buy

This tool provides estimates for general guidance only. Actual coverage varies with the product, surface, and application method. Always check the manufacturer’s specifications before buying.

A gallon of interior paint covers about 350 square feet per coat on smooth, previously painted walls. A standard 12 by 12 foot bedroom with 8-foot ceilings needs about 2 gallons for two coats after subtracting one door and two windows. Measure your room, subtract 21 square feet per door and 15 per window, multiply by coats, and divide by the coverage on the can.

Last reviewed: 19 November 2026


How to use the paint coverage calculator

Measure your room, enter the numbers, and the calculator does the rest. It works out your paintable wall area, subtracts the doors and windows, applies the number of coats, and tells you how many gallons and quarts to buy.

  1. Measure the room. Use a tape measure to find the length, width, and wall height in feet. Measure the height floor to ceiling in a corner rather than assuming the standard 8 feet, because ceiling height is the number people guess wrong most often.
  2. Count the doors and windows. Include closet doors and every full-size window. The calculator subtracts 21 square feet per door and 15 square feet per window, the standard takeoff values painters use. If your doors or windows are much larger or smaller than standard, change the area per opening to match.
  3. Choose the number of coats. Two coats is the standard for most repaints and is the default. Pick one coat only for a same-color refresh on walls in good condition, and three coats for a dramatic color change, such as dark walls going light.
  4. Pick your surface type. Previously painted smooth walls, new unpainted drywall, and textured or rough walls all drink paint at different rates. Choosing new drywall also adds a primer estimate, because bare drywall must be primed before it is painted.
  5. Check the coverage rate. The default is 350 square feet per gallon, the conservative end of the range most manufacturers publish. If the label on your paint can lists a different figure, enter that instead. The label on your exact product always beats a general rule.
  6. Set the waste allowance and, if you want a cost estimate, the price per gallon. The default waste allowance is 10 percent, which covers spills, roller loss, and touch-ups. The price field is optional and is only used for your estimate. No prices are stored or looked up.
  7. Read your result. The calculator shows your paintable wall area, the total area across all coats, the exact gallons needed, and the amount to buy, rounded up to the nearest quart so you do not run short mid-wall.

How it works

The calculator follows the same formula painters and manufacturer calculators use. First it finds the gross wall area by multiplying the room perimeter by the wall height. Then it subtracts the doors and windows, multiplies by the number of coats, and divides by the coverage rate on the can.

Paintable wall area = 2 x (length + width) x height – (doors x door area) – (windows x window area)

Gallons needed = paintable wall area x coats / coverage rate per gallon

The waste allowance is applied on top, and the final buy quantity is rounded up to the nearest quart, because paint is sold in quarts and gallons, not in fractions of a quart. The primer estimate, shown when you select new drywall, is one coat over the paintable wall area at 300 square feet per gallon, also rounded up to the nearest quart.

Worked example. Take a 12 by 12 foot bedroom with 8-foot ceilings, one door, and two windows, painted with two coats at 350 square feet per gallon. The perimeter is 2 x (12 + 12) = 48 feet. The gross wall area is 48 x 8 = 384 square feet. The openings take off 21 square feet for the door and 30 square feet for the two windows, leaving 333 square feet of paintable wall. Two coats means 666 square feet to cover. Dividing by 350 gives 1.90 gallons, and adding the 10 percent waste allowance brings it to 2.09 gallons, so you buy 2 gallons and 1 quart.

What your result means

Paintable wall area is the wall surface you will actually paint, after the doors and windows are deducted. This is the number that matters. If you measured carefully, it should be close to the wall area of a typical room of your size: a 12 by 12 foot bedroom with 8-foot ceilings has about 333 square feet of paintable wall, and a 10 by 12 foot room has about 301 square feet.

Exact gallons is the paint the math says you need, including your waste allowance but before rounding. Buy is the amount to carry to the checkout, rounded up to the nearest quart. The gap between the two is small on purpose: rounding up to quarts instead of whole gallons keeps you from buying a full extra gallon you do not need, while still leaving a margin for touch-ups.

If the result shows a primer estimate, that is one coat of primer over the same paintable wall area. Primer is a separate product with its own coverage, so it is estimated on its own line rather than folded into the paint count. If you entered a price per gallon, the estimated cost is the buy quantity multiplied by that price. It covers the finish paint only, not primer, brushes, rollers, tape, or drop cloths.

A result that looks surprisingly high usually means one of three things: the wall height is taller than you assumed, the coverage rate is set low for a textured surface, or the room has three coats selected. Check those three inputs first before doubting the math.

If the repaint is part of a bigger room refresh, the rest of the room matters too. Our mattress size finder helps you pick a bed that fits a freshly painted bedroom, and our TV size finder matches a screen to the wall it will hang on. For a kitchen repaint, the fridge capacity planner and the air fryer capacity checker can help you size the appliances going back into the finished room. You can find every free tool on the Tools Elite homepage.

Paint coverage by surface type

One gallon of interior paint covers about 350 to 400 square feet in one coat on smooth, primed drywall. That range comes from the manufacturers themselves: Sherwin-Williams lists 350 to 400 square feet per gallon across its interior lines, including Emerald, SuperPaint, and Duration Home, and Benjamin Moore lists 350 to 400 for Aura and 400 to 450 for Regal Select. Behr lists a wider range, 250 to 400 square feet per gallon for Premium Plus interior paint, and says the spread depends on the application method and how porous the surface is. The calculator defaults to 350, the conservative end of the range, so the estimate errs toward having enough paint rather than running short.

The surface you are painting changes the number more than the brand does. The table below shows the planning figures this calculator uses.

Surface Typical coverage Coats What to know
Previously painted, smooth drywall 350 to 400 sq ft per gallon 2 The standard repaint. The old paint seals the wall, so the new coat spreads evenly and the label rate holds.
New drywall (unpainted) 250 to 300 sq ft per gallon on the first coat Primer + 2 Bare drywall and joint compound soak up paint unevenly. Prime the whole surface first, then apply two finish coats.
Textured or rough (knockdown, orange peel, popcorn, stucco) 250 to 300 sq ft per gallon 2 to 3 Texture adds hidden surface area and traps paint in the low spots. Light texture sits near 300, heavy texture near 250.
Primer on new drywall 300 to 400 sq ft per gallon 1 KILZ 2 lists 300 to 400 sq ft per gallon depending on texture and porosity. The calculator plans at 300, the low end for porous surfaces.

Two details in the table are worth calling out. First, the coverage rate on the can assumes a smooth, sealed surface and a standard film thickness. Spraying uses more paint than rolling, and the loss from spraying is not included in the published figures. Second, a higher coverage number is not always better paint. Benjamin Moore Regal Select covers 400 to 450 square feet per gallon because each coat goes on thinner, while Aura covers 350 to 400 because each coat is thicker and leaves more dry film on the wall. Both are premium paints; they just build film differently.

Common mistakes to avoid

  • Guessing the ceiling height. Older homes often have 9-foot or 10-foot ceilings, and a single extra foot of height adds about 12 percent more wall area to a 12 by 12 foot room. Measure it.
  • Forgetting the second coat. One coat rarely hides evenly, dries with visible roller lap marks, and leaves a thinner film that scuffs sooner. Budget for two coats unless you are refreshing the same color on walls in good condition.
  • Skipping primer on new drywall. Bare drywall and joint compound absorb paint at different rates, so an unprimed wall dries blotchy, with the taped seams showing through as dull bands. One coat of primer seals the surface so the finish coats dry to an even sheen.
  • Using the top of the coverage range. The label figure is a best case on a smooth, sealed wall. Planning at 350 square feet per gallon instead of 400 costs a little more paint and saves a mid-project trip to the store.
  • Not deducting the openings. A door and two windows remove about 51 square feet per coat, which is 102 square feet across two coats. On a small room that is the difference between buying two gallons and three.
  • Buying the exact gallons with no margin. Spills, roller loss, cut-in waste, and touch-ups are real. The 10 percent waste allowance exists for them, and a leftover quart is far cheaper than a second trip and a mismatched batch.
  • Painting the ceiling with wall paint math. Ceilings have their own area, length times width, and their own paints with their own spread rates. This calculator covers walls only. If you are painting the ceiling too, work it out as a separate job.

Frequently asked questions

How many square feet does a gallon of paint cover?

A gallon of interior paint covers about 350 to 400 square feet in one coat on smooth, primed drywall. Sherwin-Williams lists 350 to 400 square feet per gallon across its interior lines, Benjamin Moore lists 350 to 400 for Aura and 400 to 450 for Regal Select, and Behr lists 250 to 400 for Premium Plus interior paint. Textured or rough walls drop to about 250 to 300 square feet per gallon. Always check the coverage rate printed on your paint can, because the label figure for your exact product beats any general rule.

How many coats of paint do I need?

Two coats is the standard for most interior painting. The first coat covers and the second coat evens out the finish, hides roller marks, and builds a film thick enough to wash and scuff well. One coat is usually enough only when you are refreshing the same color on walls in good condition. Plan on three coats, or a coat of tinted primer plus two finish coats, for a dramatic color change such as dark walls going light. New drywall always needs a primer coat first, followed by two finish coats.

Do I need primer on new drywall?

Yes. New drywall and fresh joint compound are porous and absorb paint unevenly, so an unprimed wall dries blotchy and the taped seams show through. A single coat of primer seals the whole surface so the finish coats dry to an even sheen and color. Behr recommends one coat of drywall primer followed by two coats of finish paint for new drywall, and KILZ 2 primer covers 300 to 400 square feet per gallon. Some paints are sold as paint and primer in one, but a dedicated primer coat is still the safer choice on bare drywall.

How much paint do I need for a 12 by 12 room?

A standard 12 by 12 foot bedroom with 8-foot ceilings, one door, and two windows has about 333 square feet of paintable wall. At two coats and 350 square feet per gallon, that needs about 1.90 gallons, so with a 10 percent waste allowance you should buy 2 gallons and 1 quart. If the walls are textured, lower the coverage rate to 250 to 300 square feet per gallon and expect to need about 3 gallons for the same room.

Should I subtract doors and windows when calculating paint?

Yes. Every door and window is wall you will not paint, and leaving them in inflates the estimate. The standard takeoff values are 21 square feet per door, based on a 3 by 7 foot door, and 15 square feet per window, based on a 3 by 5 foot window. This calculator subtracts those defaults automatically, and you can change the area per opening if your doors or windows are a different size. On a typical bedroom, one door and two windows remove about 51 square feet per coat.

How much extra paint should I buy for waste and touch-ups?

A 10 percent waste allowance is a common planning figure and is the default in this calculator. It covers spills, paint left in the roller and tray, cut-in waste around trim, and a small amount kept back for touch-ups. Round the final buy quantity up to the nearest quart rather than down, and keep the leftover in a sealed, labeled can. If you run out mid-job, a second batch can differ slightly in color, so the small cost of a spare quart is worth it.

Sources

  • BEHR Premium Plus Interior Semi-Gloss Enamel Paint No. 3050, Technical Data Sheet. Coverage 250 to 400 sq ft per gallon depending on application method and substrate porosity; drywall system is one coat of primer plus two coats of paint, or two self-priming coats. BEHR Premium Plus No. 3050 technical data sheet (PDF). Accessed 19 November 2026.
  • KILZ 2 All-Purpose Interior/Exterior Primer, Behr Pro product page. Coverage 300 to 400 sq ft per gallon depending on surface texture, porosity, and application method. KILZ 2 All-Purpose Primer on behr.com. Accessed 19 November 2026.
  • Sherwin-Williams interior paint data sheets (Emerald, SuperPaint, Duration Home, Cashmere, ProClassic), each listing 350 to 400 sq ft per gallon, as read and reported by Woodworking Advisor on 1 October 2026. How Much Is a Gallon of Paint at Sherwin-Williams?. Accessed 19 November 2026.
  • Benjamin Moore Regal Select (400 to 450 sq ft per gallon) and Aura (350 to 400 sq ft per gallon) data sheets, as reported by Yard and Gallon, with the 350 sq ft per gallon default from Benjamin Moore’s own calculator. Paint Calculator: How Many Gallons of Paint Do I Need?. Accessed 19 November 2026.
  • Standard door (3 by 7 ft, 21 sq ft) and window (3 by 5 ft, 15 sq ft) deduction values, with the wall area formula and worked room examples. How Much Paint Do I Need for a Room?. Accessed 19 November 2026.
  • Textured surface coverage of 250 to 300 sq ft per gallon, and primer coverage by product, from manufacturer data sheets. Paint Coverage Calculator: Gallons per Room (2026 Chart). Accessed 19 November 2026.
  • Primer planning figure of 300 sq ft per gallon on porous surfaces such as new drywall, from the low ends of the KILZ 2 (300 to 400) and Zinsser Bulls Eye 1-2-3 ranges. Primer Calculator: How Much Primer to Buy. Accessed 19 November 2026.