Skip to content

Division Calculator

The number being divided. Whole numbers and decimals both work.

The number you divide by. It must not be zero.

How many digits after the decimal point, from 0 to 10. The quotient is rounded to this many places; the exact fraction is always shown too.

Answer

Long division, step by step

      This calculator gives exact division answers with the working shown, for homework and everyday arithmetic. Decimal answers are rounded to the number of places you choose, so a rounded decimal is an approximation: use the exact fraction shown beside it when exactness matters. It is an educational aid: if an answer looks surprising, check the steps against your textbook or teacher.
      Quick answer: 936 divided by 4 is 234 exactly. Long division works one digit at a time: divide, multiply, subtract, bring down, until the digits run out, and the remainder is what is left over. This calculator shows every step, plus the decimal answer to 10 places, the repeating part when the decimal repeats, and the exact fraction.

      Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

      How to use the Division Calculator

      Type the dividend, the number being divided, into the first box, and the divisor, the number you are dividing by, into the second box. Then choose how many decimal places you want in the answer, from 0 to 10. The answer updates as you type, and the full working appears below it. The default example, 936 divided by 4, gives 234 exactly, so you can see what a clean division looks like before you try your own numbers.

      The answer panel gives you four things at once. The whole-number quotient is the answer without any decimal part, the remainder is what is left over, the decimal answer is the quotient rounded to the number of decimal places you chose, and the exact fraction is the division written as a fraction in its simplest form. Below those four cards, the long division steps show every divide, multiply, subtract and bring-down move, so you can follow the working line by line or check it against your own homework.

      Try the example buttons under the boxes to see the calculator at work. The 100 divided by 7 button shows a division with a remainder and a repeating decimal: the whole-number quotient is 14 with a remainder of 2, and the decimal answer is 14.29 to 2 decimal places. The 1 divided by 3 button shows a pure repeating decimal, 0.3333 to 4 decimal places, with the repeating part named. The 22 divided by 7 button shows the classic fraction approximation of pi, 3.14286 to 5 decimal places. The 7.5 divided by 0.25 button shows decimal division, which the calculator handles by clearing the decimals first. And the -7 divided by 2 button shows how negative numbers work, including the remainder's sign.

      Whole numbers and decimals both work in either box. Very large whole numbers are exact here, not rounded to fit a float: 9,007,199,254,740,993 divided by 3 gives exactly 3,002,399,751,580,331, with no remainder, because the engine does its arithmetic with BigInt integers. Each number is capped at 30 digits before the decimal point and 10 digits after it, and decimal places are capped at 10. Those caps are enforced, not just suggested: ask for 15 decimal places and the calculator uses 10 and tells you so.

      If the divisor is zero, the calculator explains why instead of inventing an answer. Division by zero has no answer at all, and 0 divided by 0 is undefined in a different way, because any number times 0 is 0. Both cases get a clear inline error. Non-numeric input gets a clear error too: type letters into either box and the calculator says so in plain language.

      How long division works

      Long division is the paper method for dividing one number by another, one digit at a time. It runs on four moves, repeated until the digits run out: divide, multiply, subtract, bring down. You divide the divisor into the current part of the dividend, write the digit of the quotient, multiply it back by the divisor, subtract to find what is left, and bring down the next digit of the dividend to make a new current number. When no digits are left, what remains is the remainder. If you want a decimal answer, you add a decimal point and keep bringing down zeros.

      Here is the default example, 936 divided by 4, worked in full. Every line below matches the steps this calculator shows for the same division:

      1. Bring down 9. 4 goes into 9 twice: 2 × 4 = 8. 9 − 8 = 1.
      2. Bring down 3, making 13. 4 goes into 13 three times: 3 × 4 = 12. 13 − 12 = 1.
      3. Bring down 6, making 16. 4 goes into 16 four times: 4 × 4 = 16. 16 − 16 = 0.

      The quotient is 234 and the remainder is 0, so the division is exact. The check is 234 × 4 + 0 = 936. Notice how each step's numbers can be checked from the printed numbers alone: 2 × 4 really is 8, 9 − 8 really is 1, and the 1 carried into the next step is the same 1 that came out of the subtraction. That checkability is the point of showing the steps instead of only the answer.

      Now a division with a remainder and a decimal tail: 100 divided by 7. The integer steps run:

      1. Bring down 1. 7 does not go into 1, so the quotient digit is 0.
      2. Bring down 0, making 10. 7 goes into 10 once: 1 × 7 = 7. 10 − 7 = 3.
      3. Bring down 0, making 30. 7 goes into 30 four times: 4 × 7 = 28. 30 − 28 = 2.

      The whole-number quotient is 14 with a remainder of 2, and the check is 14 × 7 + 2 = 100. The first step is worth noticing: 7 does not go into 1, so the quotient starts with a 0 that is dropped from the final answer. Beginners often skip that step and then wonder why their quotient has too few digits. The calculator shows it, because a step you cannot see is a step you cannot check.

      To continue past the decimal point, add a decimal point to the quotient and bring down a 0 after the remainder. The remainder 2 becomes 20, and 7 goes into 20 twice (2 × 7 = 14, 20 − 14 = 6), giving the first decimal digit, 2. Bring down another 0 to make 60, and 7 goes into 60 eight times (8 × 7 = 56, 60 − 56 = 4), giving the second decimal digit, 8. One more 0 makes 40, and 7 goes into 40 five times (5 × 7 = 35, 40 − 35 = 5), giving the third decimal digit, 5. So 100 divided by 7 is 14.285 to 3 decimal places, and the digits keep going: 14.285714285714, with the six digits 285714 repeating forever. To 2 decimal places the answer is 14.29, because the third digit, 5, rounds the second digit up from 8 to 9. The calculator shows that rounding step explicitly, so the rounded answer never looks like a mistake in the long division.

      Long division is slow compared with a calculator button, and that is its value. Each step is a small division, a small multiplication, and a small subtraction, all of which you can check by hand. When the steps are written out, an error has nowhere to hide: a wrong quotient digit makes the subtraction go negative or leave a remainder bigger than the divisor, and both are visible at once. That is why the method is still taught, and why this calculator shows the working rather than only the result.

      What the parts of a division are called

      Every division has four named parts, and knowing the names makes the calculator's output easy to read. The dividend is the number being divided. The divisor is the number you divide by. The quotient is the answer. The remainder is what is left over when the divisor does not fit into the dividend an exact number of times. In 100 ÷ 7 = 14 remainder 2, the dividend is 100, the divisor is 7, the quotient is 14, and the remainder is 2.

      The four parts are tied together by one equation, which is the fastest way to check any division: dividend = quotient × divisor + remainder. For 100 ÷ 7, that is 100 = 14 × 7 + 2. For 936 ÷ 4, it is 936 = 234 × 4 + 0. The equation holds for negative numbers and decimals too: -7 ÷ 2 gives a quotient of -3 with a remainder of -1, and -3 × 2 + (-1) = -7. And 7.5 ÷ 2 gives a quotient of 3 with a remainder of 1.5, and 3 × 2 + 1.5 = 7.5. This calculator prints the check equation with every answer, using your numbers, so you can verify the result without doing any extra work.

      The remainder is always smaller than the divisor, in absolute value. If your remainder is as big as the divisor or bigger, the quotient digit was too small: the divisor fits in at least once more. In the 100 ÷ 7 example, every remainder along the way (3, then 2, then 6, then 4, then 5) is smaller than 7. If you ever finish a long division step with a remainder of 7 or more when dividing by 7, go back and raise the quotient digit. The calculator enforces this by construction: each step divides the current number by the divisor and takes the true remainder, so a remainder is never too big.

      The quotient comes in two forms, and this page shows both. The whole-number quotient is the answer with the decimal part cut off: for 7 ÷ 2 it is 3, with a remainder of 1. The decimal quotient is the full answer carried past the decimal point: for 7 ÷ 2 it is 3.5. The two forms answer different questions. If you are sharing 7 apples between 2 people and each person must get whole apples, the whole-number quotient (3 each) and the remainder (1 apple left over) are what you want. If you are splitting a 7 dollar bill between 2 people, the decimal answer (3.50 dollars each) is what you want. Confusing the two is one of the most common division mistakes, so the calculator labels each one plainly.

      Division is the inverse of multiplication, which is another way to check an answer. If 936 ÷ 4 = 234, then 234 × 4 must be 936, and it is. If 100 ÷ 7 = 14 remainder 2, then 14 × 7 + 2 must be 100, and it is. Whenever an answer looks surprising, multiply it back. That one habit catches most division errors, including the common one of swapping the dividend and the divisor: 4 ÷ 936 is a very different problem from 936 ÷ 4, and the multiply-back check exposes the swap at once.

      Division by zero

      Division by zero has no answer, and that is not a limitation of this calculator: it is a fact about arithmetic. Division asks a multiplication question in reverse. To divide 12 by 3 is to ask what number times 3 gives 12, and the answer is 4. To divide 5 by 0 is to ask what number times 0 gives 5, and no number does that, because anything times 0 is 0. There is no answer to find, so the calculator says so instead of showing a number.

      Zero divided by zero is a different problem, and it is undefined for the opposite reason. To divide 0 by 0 is to ask what number times 0 gives 0, and every number does that: 1 × 0 = 0, 7 × 0 = 0, 1,000,000 × 0 = 0. There is no single answer, so the result is undefined rather than merely missing. This calculator treats 0 ÷ 0 as its own case, with its own explanation, because the reason is different from the reason 5 ÷ 0 fails.

      Zero divided by a nonzero number is perfectly fine, and the answer is 0. Zero divided by 5 is 0 with a remainder of 0: there is nothing to share out, so each share is 0. The check is 0 × 5 + 0 = 0. Only the divisor being zero is a problem. A zero dividend is an ordinary division with an ordinary answer.

      This matters beyond homework. Spreadsheets, programming languages, and calculators all have to decide what to do with division by zero, and they do not all decide the same way. Some show an error, some show infinity, and some crash. The mathematically honest answer is that the operation is undefined, and that is what this calculator reports, with the reason in plain language. If your division keeps hitting a zero divisor, the problem is usually upstream: a count that came out empty, a total that was never entered, or a formula dividing by a cell that holds 0.

      Decimals and repeating decimals

      Every division of two whole numbers gives a decimal that either ends or repeats forever. There is no third option. A decimal ends when the remainder reaches 0 during the long division: 1 ÷ 4 = 0.25, 1 ÷ 8 = 0.125, 7 ÷ 2 = 3.5, 1 ÷ 40 = 0.025. A decimal repeats when a remainder comes back a second time, because from that point the same digits must follow in the same order, forever: 1 ÷ 3 = 0.333..., 1 ÷ 6 = 0.1666..., 1 ÷ 7 = 0.142857142857..., 1 ÷ 11 = 0.090909....

      Whether a decimal ends or repeats is decided by the divisor, once the fraction is reduced to simplest form. If the reduced denominator's only prime factors are 2s and 5s, the decimal ends: 1 ÷ 8 ends because 8 is 2 × 2 × 2, and 1 ÷ 40 ends because 40 is 2 × 2 × 2 × 5. If the reduced denominator has any other prime factor, the decimal repeats: 1 ÷ 3 repeats because of the 3, 1 ÷ 6 repeats because 6 is 2 × 3, and 1 ÷ 7 repeats because of the 7. Reducing first matters: 12 ÷ 16 is 3 ÷ 4 once reduced, so it ends at 0.75 even though 16 itself is all 2s, and 6 ÷ 9 is 2 ÷ 3 once reduced, so it repeats even though 9 is not the reduced denominator.

      The repeating part can be short or very long. The repeating part of 1 ÷ 3 is a single digit, 3. The repeating part of 1 ÷ 7 is six digits, 142857, and the same six digits cycle through 2 ÷ 7 (0.285714), 3 ÷ 7 (0.428571), and the other sevenths, each starting at a different point in the cycle. The repeating part of 355 ÷ 113 is 112 digits long. And some repeating parts are longer than any reasonable display: 1 ÷ 983 has a repeating part longer than 200 digits, which is beyond the point where printing the cycle helps anyone.

      This calculator finds the repeating part the same way you would by hand: it watches the remainders during the long division, and when a remainder repeats, the digits from its first appearance form the repeating part. It searches up to 200 digits. When it finds the cycle, it shows the decimal in repeating notation, with the repeating part in parentheses: 1 ÷ 3 is 0.(3), 1 ÷ 6 is 0.1(6), and 22 ÷ 7 is 3.(142857). When no cycle appears within 200 digits, it says so honestly and shows the decimal truncated at the chosen number of places, instead of pretending the truncated digits are the whole story. The exact fraction is always shown alongside, and the fraction is exact whether the decimal repeats or not.

      Rounding a repeating decimal needs care, because a rounded decimal is an approximation, not the exact answer. The calculator rounds half up: look at the first digit past the places you keep, and if it is 5 or more, the last kept digit goes up by one. So 1 ÷ 3 to 2 decimal places is 0.33 (the next digit is 3, so the last digit stays), while 2 ÷ 3 to 2 decimal places is 0.67 (the next digit is 6, so the last digit rounds up). And 1 ÷ 6 to 4 decimal places is 0.1667 (the digits are 1, 6, 6, 6, 6, so the fifth digit rounds the fourth up). The rounding step is printed in the steps list, with the digit that decided it, so a rounded answer is never confused with an exact one.

      One famous repeating decimal deserves a mention. The fraction 355 ÷ 113 is 3.1415929203..., which agrees with pi to six decimal places (pi is 3.1415926535...). The fraction is known as Milü, and it was worked out by the Chinese mathematician Zu Chongzhi in the 5th century, more than a thousand years before decimal notation reached Europe. Its repeating part is 112 digits long, which this calculator finds and displays in full. Try it with 6 decimal places: the calculator gives 3.141593, and the seventh digit, 9, is what rounds the 2 up to a 3.

      Negative numbers and the remainder sign

      Negative numbers follow the same long division as positive ones, with one extra decision: the sign of the answer, and the sign of the remainder. The sign of the quotient follows the usual rule: a negative divided by a positive is negative, a positive divided by a negative is negative, and two negatives give a positive. So -7 ÷ 2 = -3.5, 7 ÷ -2 = -3.5, and -7 ÷ -2 = 3.5. The calculator works with the absolute values and applies the sign at the end, and it says so in the steps.

      The remainder's sign is the part people argue about, because two conventions exist. This calculator uses the truncated-division convention, the one JavaScript, C, and Java use, and the one most school calculators show: the remainder takes the sign of the dividend. So -7 ÷ 2 gives a quotient of -3 with a remainder of -1, because -3 × 2 + (-1) = -7. And 7 ÷ -2 gives a quotient of -3 with a remainder of 1, because -3 × -2 + 1 = 7. The remainder is negative exactly when the dividend is negative.

      The other convention, sometimes called Euclidean division, always gives a non-negative remainder, and adjusts the quotient to suit: under that convention, -7 ÷ 2 would give a quotient of -4 with a remainder of 1, because -4 × 2 + 1 = -7. Both conventions satisfy the check equation; they differ in how they split the answer between quotient and remainder. Neither is wrong, but they give different answers, so a calculator has to pick one and say which. This calculator picks the truncated convention and states it in the results, in the notes, and here, so there is no surprise.

      For the decimal answer, the sign question is simpler: the decimal quotient is negative exactly when one of the two numbers is negative, and the rounding works on the absolute value before the sign is applied. So -1 ÷ 3 to 3 decimal places is -0.333, and -100 ÷ 7 to 2 decimal places is -14.29, the negative of the positive answers. The repeating part is the same digits either way: -1 ÷ 3 is -0.(3), the negative of 0.(3).

      Dividing decimals

      Dividing decimals looks harder than dividing whole numbers, but it is the same operation with one preparatory step: clear the decimals first. Multiply both numbers by the same power of 10 until neither has a decimal point, and the answer does not change, because multiplying the dividend and the divisor by the same amount leaves the quotient alone. The calculator does this step for you and shows it as the first line of the working.

      Take 7.5 ÷ 0.25. The divisor has two digits after the decimal point, so multiply both numbers by 100: 7.5 becomes 750 and 0.25 becomes 25, and 750 ÷ 25 = 30. So 7.5 ÷ 0.25 = 30. The check is 30 × 0.25 = 7.5. The long division runs on 750 ÷ 25, which is an ordinary whole-number division: 25 goes into 75 three times, and 25 goes into 0 zero times.

      Take 7.5 ÷ 2. Here only the dividend has a decimal, one digit, so multiply both numbers by 10: 7.5 becomes 75 and 2 becomes 20, and 75 ÷ 20 = 3 remainder 15. The quotient is 3, and the remainder has to be scaled back down by the same factor of 10, giving 1.5. So 7.5 ÷ 2 = 3 remainder 1.5, and the decimal answer is 3.75. The check is 3 × 2 + 1.5 = 7.5. Forgetting to scale the remainder back is the classic error in decimal division, and the calculator's closing step shows the remainder in the original units, so the check equation balances with the numbers you typed.

      The same method handles any mix. Dividing 1.5 by 0.3: multiply both by 10 to get 15 ÷ 3 = 5. Dividing 10.5 by 3.5: multiply both by 10 to get 105 ÷ 35 = 3. Dividing 0.1 by 0.3: multiply both by 10 to get 1 ÷ 3 = 0.333..., with a remainder of 0.1 in the original units. Dividing 5.75 by 2.5: multiply both by 100 to get 575 ÷ 250 = 2 remainder 75, which scales back to 0.75, so the decimal answer is 2.30. In every case the scaled division is exact whole-number arithmetic, which is why the calculator's decimal answers are exact to the chosen places rather than float approximations.

      One caution: the decimal places you choose apply to the quotient, not to the inputs. A quotient rounded to 2 decimal places is an approximation of the true answer whenever the true decimal goes further, and the calculator says so in the rounding step. The exact fraction underneath never changes: 1.1 ÷ 0.7 is exactly 11/7, whether you show it as 1.57, 1.571, or 1.5714. When exactness matters, use the fraction.

      Fractions from division

      Every division is a fraction, and every fraction is a division. The division 12 ÷ 16 is the fraction 12/16, and the fraction 12/16 is the division 12 ÷ 16. The calculator shows both forms because each is useful in different places: the decimal is easier to compare with other decimals, and the fraction is exact when the decimal repeats or is rounded.

      The fraction is always reduced to simplest form by dividing the top and bottom by their greatest common factor. So 12 ÷ 16 gives 3/4, because the greatest common factor of 12 and 16 is 4. And 10 ÷ 4 gives 5/2, because the greatest common factor of 10 and 4 is 2. When the division comes out even, the fraction has a denominator of 1: 936 ÷ 4 is 234/1, which is just 234. When the dividend is 0, the fraction is 0/1. A negative sign always goes on the numerator: -7 ÷ 2 is -7/2, and 7 ÷ -2 is also -7/2, because the two divisions have the same value.

      The fraction form is the honest answer for repeating decimals. The decimal 0.3333 is an approximation of 1 ÷ 3, but the fraction 1/3 is the exact answer. The decimal 3.14286 is an approximation of 22 ÷ 7, but the fraction 22/7 is exact. If you feed a rounded decimal into a further calculation, the rounding error travels with it; if you feed the fraction in, the answer stays exact. That is why the calculator keeps the fraction visible next to the decimal, and why the steps list ends with the check equation rather than with the rounded decimal.

      Reducing a fraction by hand uses the same greatest common factor this page's companion tool finds: our GCF Calculator gives the number to divide by, and our Fraction Calculator works with the reduced fraction directly. To write a division as a ratio instead, use our Ratio Calculator: 12 ÷ 16 as a ratio is 12:16, which reduces to 3:4, the same reduction as the fraction.

      Common mistakes to avoid

      • Swapping the dividend and the divisor. Division is not commutative: 936 ÷ 4 is 234, but 4 ÷ 936 is 0.0043. If your answer looks absurdly small or absurdly large, check which number went in which box. The multiply-back check catches this at once.
      • Forgetting the remainder. A whole-number quotient without its remainder is an incomplete answer: 100 ÷ 7 is not 14, it is 14 remainder 2. Dropping the remainder turns 100 into 98. If the problem needs whole items, the remainder is part of the answer, not an afterthought.
      • Treating a rounded decimal as exact. The decimal 0.33 is not 1 ÷ 3; it is 1 ÷ 3 rounded to 2 decimal places. The exact answer is the fraction 1/3 or the repeating decimal 0.(3). Using 0.33 in a further calculation gives a slightly wrong result, and the error grows with each step.
      • Rounding too early. Round once, at the end. If you round an intermediate quotient to 2 decimal places and then divide again, the second answer inherits the first rounding. Keep the full decimal, or better the fraction, until the last step.
      • Forgetting to scale the remainder back in decimal division. In 7.5 ÷ 2, the scaled division 75 ÷ 20 leaves a remainder of 15, but the remainder of the original division is 1.5, not 15. The check equation exposes this: 3 × 2 + 15 = 21, not 7.5, while 3 × 2 + 1.5 = 7.5.
      • Misplacing the decimal point in the quotient. In long division, the decimal point in the quotient sits directly above the decimal point in the dividend. A quotient of 3.75 written as 37.5 or 0.375 is wrong by a factor of 10 either way. A rough estimate before dividing (7.5 ÷ 2 is near 8 ÷ 2 = 4) tells you where the point belongs.
      • Skipping the leading zero step. In 100 ÷ 7, the first step is that 7 does not go into 1, so the quotient digit is 0. Skipping that step and starting with 10 gives the same digits, but in longer divisions it shifts the quotient and produces a wrong answer. Show every step, including the zeros.
      • Dividing by zero and expecting a number. There is no answer, not even a very large one. If a formula keeps dividing by zero, the zero is the problem, not the division: find where the zero came from and fix it there.
      • Assuming a decimal that looks short is exact. A calculator display of 0.3333333333 is a truncated repeating decimal, not a terminating one. The number of digits on screen is a display limit, not a property of the number. This calculator names the repeating part so the display never misleads.
      • Mixing up the two quotient forms. The whole-number quotient of 7 ÷ 2 is 3 with a remainder of 1; the decimal quotient is 3.5. Answering 3 when the question wants 3.5, or 3.5 when the question wants a whole number and a remainder, is a wrong answer even though the arithmetic is right.

      Division in everyday life

      Division is the arithmetic of sharing, pricing, and averaging, and most of its everyday uses are one of those three. Sharing: an 87 dollar restaurant bill split between 4 people is 87 ÷ 4 = 21.75 dollars each, with no remainder to argue about. A 240 mile drive over 4 hours is 240 ÷ 4 = 60 miles per hour on average. A recipe that serves 6 and needs 3 cups of flour uses 3 ÷ 6 = 0.5 cups per serving. Pricing: a 12 pack that costs 9 dollars is 9 ÷ 12 = 0.75 dollars per item, which is the unit price to compare against the single item. Averaging: five test scores that add to 430 average 430 ÷ 5 = 86.

      Unit pricing is division at its most practical. Two packs of the same product at different sizes and prices cannot be compared until each is reduced to a price per unit, and that is a division. A 24 ounce bottle at 4.80 dollars is 4.80 ÷ 24 = 0.20 dollars per ounce; a 16 ounce bottle at 3.60 dollars is 3.60 ÷ 16 = 0.225 dollars per ounce, so the larger bottle is cheaper per ounce even though it costs more overall. The same division compares phone plans per gigabyte, paint per square foot, and fuel per mile.

      Percentages are divisions in disguise: a percent is a division by 100, and finding what percent one number is of another is a division followed by a multiplication by 100. If 18 of 240 students are absent, the absent share is 18 ÷ 240 = 0.075, which is 7.5 percent. Our Percentage Calculator carries that step for you, and our Ratio Calculator handles the related question of how two numbers compare as a ratio.

      Division also sits underneath the number theory tools on this site. Testing whether a number is prime is a run of divisions: a number is prime when no divisor other than 1 and itself divides it exactly, which our Prime Number Checker tests for you. Finding a greatest common factor is repeated division with remainders, which our GCF Calculator shows step by step, and the least common multiple follows from it in our LCM Calculator. And when a calculation chains several divisions with other operations, our Scientific Calculator takes over. The Tools Elite homepage lists every tool on the site.

      Frequently asked questions

      How do you do long division step by step?

      Repeat four moves until the digits run out: divide, multiply, subtract, bring down. Divide the divisor into the current part of the dividend and write the quotient digit, multiply that digit by the divisor, subtract to find what is left, and bring down the next digit. For 936 divided by 4: 4 goes into 9 twice (2 × 4 = 8, 9 − 8 = 1), then into 13 three times (3 × 4 = 12, 13 − 12 = 1), then into 16 four times (4 × 4 = 16, 16 − 16 = 0), so the answer is 234 with a remainder of 0. To continue past the decimal point, add a decimal point and keep bringing down zeros.

      What is the quotient and remainder of 100 divided by 7?

      The quotient is 14 and the remainder is 2, because 14 × 7 = 98 and 100 − 98 = 2. As a decimal, 100 divided by 7 is 14.285714..., with the six digits 285714 repeating forever, so to 2 decimal places it is 14.29. The check is 14 × 7 + 2 = 100.

      Why can't you divide by zero?

      Division asks a multiplication question in reverse: 12 divided by 3 asks what number times 3 gives 12, and the answer is 4. Dividing 5 by 0 asks what number times 0 gives 5, and no number does that, because anything times 0 is 0. Zero divided by 0 is undefined for the opposite reason: every number times 0 is 0, so there is no single answer. Zero divided by a nonzero number is fine, and the answer is 0.

      What is 1 divided by 3 as a decimal?

      1 divided by 3 is 0.333..., with the digit 3 repeating forever, written 0.(3). It never ends and never settles: every step of the long division leaves a remainder of 1, so the digit 3 comes out again each time. To 2 decimal places it is 0.33, to 4 decimal places it is 0.3333, but those are rounded approximations. The exact answer is the fraction 1/3.

      How do you divide decimals?

      Clear the decimals first by multiplying both numbers by the same power of 10, which does not change the answer. For 7.5 divided by 0.25, multiply both by 100 to get 750 divided by 25, which is 30. For 7.5 divided by 2, multiply both by 10 to get 75 divided by 20, which is 3 with a remainder of 15 in the scaled division, or 1.5 in the original numbers, so the decimal answer is 3.75. Remember to scale the remainder back down by the same factor.

      What is the remainder when you divide a negative number?

      The remainder takes the sign of the dividend. So -7 divided by 2 gives a quotient of -3 with a remainder of -1, because -3 × 2 + (-1) = -7. And 7 divided by -2 gives a quotient of -3 with a remainder of 1, because -3 × -2 + 1 = 7. This is the truncated-division convention used by JavaScript, C, and Java, and by most school calculators. The decimal answer is negative whenever exactly one of the two numbers is negative.

      How do you turn a division into a fraction?

      Write the dividend over the divisor and reduce by dividing the top and bottom by their greatest common factor. So 12 divided by 16 is 12/16, which reduces to 3/4, because the greatest common factor of 12 and 16 is 4. And 10 divided by 4 is 10/4, which reduces to 5/2. A negative sign goes on the numerator: -7 divided by 2 is -7/2. When the division comes out even, the fraction has a denominator of 1, so 936 divided by 4 is 234/1.

      What is the difference between the whole-number quotient and the decimal answer?

      The whole-number quotient is the answer with the decimal part cut off, plus a remainder: 7 divided by 2 is 3 with a remainder of 1. The decimal answer carries the division past the decimal point: 7 divided by 2 is 3.5. Use the whole-number quotient and remainder when the problem needs whole items, such as sharing 7 apples between 2 people, and use the decimal answer when the problem needs an exact split, such as dividing a 7 dollar bill between 2 people. Both satisfy the same check: 3 × 2 + 1 = 7.

      Sources

      • Maths is Fun, Long Division — long division runs on divide, multiply, subtract, bring down, repeated digit by digit; the worked examples show each step with its multiply and subtract lines. Accessed 20 November 2026.
      • Wikipedia, Long division — the standard algorithm breaks a division into a sequence of easier steps, working one digit of the dividend at a time with the divisor's multiplication table. Accessed 20 November 2026.
      • Wikipedia, Division by zero — division by zero is undefined in ordinary arithmetic: no number times 0 gives a nonzero dividend, and 0 divided by 0 has no single value because every number satisfies it. Accessed 20 November 2026.
      • Wikipedia, Repeating decimal — every rational number has a decimal expansion that either terminates or repeats; a reduced fraction terminates exactly when its denominator has no prime factors other than 2 and 5; 1/7 repeats with the six-digit cycle 142857. Accessed 20 November 2026.
      • Wikipedia, Euclidean division — dividing a by b gives a quotient q and a remainder r with a = bq + r and the remainder smaller than the divisor; the sign conventions for negative dividends differ between truncated and Euclidean division. Accessed 20 November 2026.
      • Wikipedia, Milü — the fraction 355/113, known as Milü, was worked out by the Chinese mathematician Zu Chongzhi in the 5th century and approximates pi to six decimal places. Accessed 20 November 2026.
      • MDN, Remainder (%) — the remainder operator returns the remainder left over after division, and the result always takes the sign of the dividend. Accessed 20 November 2026.