LinkedIn Character Counter
Your count
No text yet. Paste your LinkedIn post to count it.
Where the fold falls
Paste or type your text above. The counter checks it against the 3,000-character post limit and shows where the feed folds it.
How the count was worked out
Keep writing: our Word Counter counts words, sentences, and reading time for any text, our Best Time to Post Planner picks the best posting time for LinkedIn and eight other platforms, our Engagement Rate Calculator scores a post against the LinkedIn benchmark, and our LinkedIn Ads Budget Calculator plans a paid campaign budget.
Last reviewed: 21 November 2026. Platform limits change without notice; next review due 19 May 2027.
How to use the LinkedIn Character Counter
A LinkedIn post can hold up to 3,000 characters, and the About section on your profile can hold up to 2,600. Those are the two numbers this counter checks your text against. Pick the field you are writing for, paste your draft, and the counter tells you how many characters you have used, how many you have left, whether you are over the limit, and where LinkedIn folds the text behind a see more link. The count updates as you type, so you can trim a draft down to the limit live instead of guessing and re-pasting.
The counter counts what you can see: each visible character counts once, including spaces and line breaks. A flag emoji counts as one character, a family emoji counts as one, and a letter with an accent counts as one, even though each of those is stored as several code units behind the scenes. LinkedIn does not publish its own counting rule for emoji, so the counter also shows the strictest count, the UTF-16 code-unit count, and warns you whenever the strict count would be over the limit while the visible count fits. That warning is the difference between a draft that posts cleanly and a draft that LinkedIn refuses at the last character.
To count your text, follow these steps:
- Choose the field. Use the dropdown at the top of the tool. Pick "LinkedIn post" for a feed post, with its 3,000-character limit, or "About section" for the summary at the top of your profile, with its 2,600-character limit. The limit, the fold preview, and the guidance all change with the field, because the two fields fold at different points.
- Paste or type your text. Click in the box and paste your draft, or type it directly. The counter updates on every keystroke, so there is nothing to submit. If you want to see the tool in action first, the "Paste sample text" button loads a sample for the field you picked: a 229-character post about a product launch, or a 238-character About section for an operations manager.
- Read the headline. The big line under the form gives the verdict in one sentence: how many characters your text is, and how many are left of the limit. If the text is exactly at the limit, it says so plainly. If it is over, it says how many characters over, which is the number you have to cut.
- Check the cards. Below the headline, the cards show the character count, the characters left, the word count, the sentence count, the line count, the paragraph count, the hashtag count, the mention count, and the link count. When your text contains emoji or combined characters, an extra card shows the strictest count, so you can see both counts side by side.
- Read the fold preview. The "Where the fold falls" section shows what a reader sees before the see more link. For a post there are two previews, one for desktop at about 210 characters and one for a phone at about 140. For an About section there is one preview, at about 265 characters. The preview prints the visible text, then a ...see more marker, then how many characters hide behind the link. If the whole text fits before the fold, it says so.
- Read the guidance and the steps. The guidance explains the result in plain language, including the fold and any counting warning. The steps print the full working: the character count, the remaining count, the share of the room used, the fold arithmetic, and the word, sentence, line, paragraph, hashtag, mention, and link counts. Every number in the steps can be checked against your own arithmetic.
- Act on the warnings. A warning appears when the text is over the limit, when it is exactly at the limit, when fewer than 50 characters are left, or when the strict count would be over the limit while the visible count fits. Each warning says what to do: cut a stated number of characters, or turn an over-long post into an article.
The tool never sends your text anywhere. Everything is counted in your browser, and nothing you paste is stored, which matters when the draft is a job announcement, a client story, or a post you have not published yet. When the count reads right, copy the text from the box and paste it into LinkedIn. One habit is worth building: leave a small margin rather than aiming for the exact limit, because a link pasted in full counts toward the limit until LinkedIn shortens it, and LinkedIn does not say whether the long or the short form counts.
How it works
The counter runs in four steps: it splits your text into visible characters, it counts them, it compares the count with the limit for the field you picked, and it compares the count with the fold points. Each step is simple on its own, and the steps section on the page prints all four, so you can check the result instead of trusting it.
Step 1: splitting the text into visible characters
The counter splits your text into grapheme clusters, which is the technical name for visible characters. A grapheme cluster is what a reader sees as one character: a letter, a digit, a space, a punctuation mark, or a single emoji, however many code units it takes to store. The split follows the Unicode standard for grapheme cluster boundaries, using the same segmentation rules a browser uses to place a cursor. On a system without that segmentation support, the counter falls back to counting Unicode code points, and it reports which method it used, so the count is never silently different from what you expect.
The distinction matters most for emoji. A smiling face is one code point and one grapheme, so every way of counting agrees on it. A flag is two code points, the two regional indicator letters, but one grapheme, because the two letters always render as a single flag. A family emoji is five code points joined by zero-width joiners, but one grapheme. A letter with a combining accent, such as an e followed by a combining acute accent, is two code points and one grapheme. A thumbs-up with a skin tone is two code points and one grapheme. Counting graphemes is counting what the reader sees, which is what a character limit ought to mean.
Step 2: counting, three ways
The counter reports three counts, because LinkedIn does not say which one it enforces, and the honest thing is to show all three rather than pretend the question is settled. The headline count is the grapheme count: visible characters, each counted once. The code-point count is the number of Unicode code points, which is what most programming languages report as a string length in Python or as an array length in JavaScript. The UTF-16 code-unit count is the strictest count: it is what JavaScript reports as a plain string length, and it is the count a Java-based backend would most naturally enforce. Most emoji count 2 under UTF-16, a flag counts 4, a family emoji counts 8, and a styled letter from the mathematical bold alphabet counts 2.
For plain English text the three counts agree exactly, because every letter, digit, space, and line break is one code point and one UTF-16 code unit. They only diverge when the text contains emoji, accented letters built from combining marks, styled Unicode letters, or other characters outside the basic set. When they diverge, the counter shows the gap and warns you if the strictest count crosses the limit. The verdict, fits or over, uses the grapheme count, and the warning tells you when the strict count disagrees.
Step 3: comparing with the limit
The limit depends on the field: 3,000 characters for a post, 2,600 for an About section. The counter subtracts the character count from the limit to get the remaining count, and divides the count by the limit to get the share of the room used. The share rounds down to one decimal place, so it never reads 100 percent before the text is full: 2,999 of 3,000 reads 99.9 percent, and 3,000 of 3,000 reads 100 percent. There are four verdicts. Empty means no text yet. Fits means the text is under the limit. Exact means the text is exactly at the limit, which LinkedIn accepts, with no room to spare. Over means the text is past the limit, and the counter states the number of characters to cut.
Step 4: comparing with the fold
The fold is where LinkedIn cuts the visible text and adds a see more link. For a post the fold falls at about 210 characters on desktop and about 140 on a phone. For an About section it falls at about 265 characters. The counter compares the character count with each fold point and reports how many characters show before the fold and how many hide behind it. The fold points are approximate, and they are measurements made by other publishers, not figures LinkedIn publishes, so the counter says "about" every time it states one. A line break moves the fold earlier, because the fold is really a number of lines, about three, and a short line uses up one of them.
Worked example 1: a short post
The text is "Hello world", counted as a post.
- Characters: 11, counting each visible character once, including the space. That is 10 letters plus 1 space.
- Remaining: 3,000 minus 11 equals 2,989.
- Room used: 11 divided by 3,000 equals 0.3 percent.
- Words: 2. Sentences: 1. Lines: 1. Paragraphs: 1. Hashtags: 0. Mentions: 0. Links: 0.
- Fold: 11 characters is short of both folds, so the whole post shows in the feed on a phone and on desktop, before any see more link.
Worked example 2: the sample post, past both folds
The text is the sample post the tool loads: "We just shipped the new onboarding flow. It took six weeks, three rewrites, and one very patient design team. Here is what we learned about keeping new users past day one, and the one metric that told us we were finally on track."
- Characters: 229. Words: 43. Sentences: 3. Lines: 1.
- Remaining: 3,000 minus 229 equals 2,771.
- Room used: 229 divided by 3,000 equals 7.6 percent.
- Desktop fold: 229 minus 210 equals 19 characters past the desktop fold, so the visible text ends mid-word at "...we wer" and the rest hides behind see more.
- Mobile fold: 229 minus 140 equals 89 characters past the mobile fold, so a phone reader sees the first 140 characters, ending at "...about ", and the rest hides behind see more.
This example shows why the opening line matters. A phone reader sees the launch, the six weeks, and the three rewrites, but not the lesson or the metric. If the point of the post is the metric, it belongs in the first 140 characters, not at the end.
Worked example 3: emoji counted three ways
The text is a single letter a, a United States flag, a family emoji, an e with a combining acute accent, and a thumbs-up with a medium skin tone, with no spaces between them.
- Graphemes: 5. Each visible character counts once: a, the flag, the family, the accented e, and the thumbs-up.
- Code points: 12. The flag is 2, the family is 5, the accented e is 2, the thumbs-up is 2, and the letter a is 1.
- UTF-16 code units: 19. The flag is 4, the family is 8, the accented e is 2, the thumbs-up is 4, and the letter a is 1.
- Counting gap: 19 minus 5 equals 14. The strictest count is nearly four times the visible count, on a text of five visible characters.
For a short text the gap is only a curiosity. Near the limit it is the whole ballgame: a draft of 2,996 visible characters with five ordinary emoji is 3,001 characters under the strict count, which is 1 over the limit. The counter flags that case with a warning, because it is exactly the case where a draft that looks fine gets refused.
Worked example 4: an over-long post
A draft of 3,042 characters, counted as a post.
- Over the limit: 3,042 minus 3,000 equals 42 characters to cut.
- Room used: 3,042 divided by 3,000 equals 101.4 percent.
- Fold: 3,042 minus 210 equals 2,832 characters past the desktop fold, and 3,042 minus 140 equals 2,902 past the mobile fold. Almost the whole draft sits behind see more.
- Verdict: over. LinkedIn will not accept the post as written. Its own suggestion is to write an article instead, which allows up to 125,000 characters.
Worked example 5: an About section at the fold
A draft of 265 characters, counted as an About section.
- Characters: 265. Remaining: 2,600 minus 265 equals 2,335.
- Room used: 265 divided by 2,600 equals 10.1 percent.
- Fold: 265 is exactly the fold point, so the whole section shows on the profile before the see more link. One more character puts the tail behind the link.
The sample About section the tool loads is 238 characters, with 38 words and 3 sentences, which leaves 2,362 characters of the 2,600 limit and sits 27 characters short of the fold. It shows whole on the profile, which is the right shape for a section whose job is to be read at a glance.
The limits, and where each number comes from
LinkedIn does not keep its character limits on one page, and the numbers repeated around the web are not always current. Some limits LinkedIn states on its own help pages, some it states on its Talent Blog, some it enforces in the editor without publishing anywhere, and some it does not publish at all. The table below gives the limits that matter for writing on LinkedIn, with how firm each figure is and where it comes from. Every figure was checked against LinkedIn's own pages on 21 November 2026, or is marked as coming from somewhere else.
| Field | Limit | Where the number comes from | How firm is it? |
|---|---|---|---|
| Post | 3,000 characters | LinkedIn Help, "Post and share updates" | Firm. LinkedIn's own help page states it. |
| Post in a group | 3,000 characters | LinkedIn Help, group limits page | Firm. Same figure as a regular post. |
| About section | 2,600 characters | LinkedIn Talent Blog, 30 April 2024 | Firm. LinkedIn's own blog states it; the Help Center gives no number. |
| Article | 125,000 characters | LinkedIn Help, "Differences between posting updates and publishing articles" | Firm. LinkedIn's own help page states it. |
| Headline | 220 characters | LinkedIn Talent Blog, 27 February 2025 | Firm. The editor enforces it; the Help Center gives no number. |
| Comment | 1,250 characters | LinkedIn Help, group limits page | Less firm. Stated for group comments; no help page covers comments on ordinary posts. |
The post limit is the best documented of the set. LinkedIn's help page on posting updates says, in plain words, "Posts can contain up to 3,000 characters", and adds that a post over 3,000 characters can instead be written as an article. A second help page, on the difference between posting updates and publishing articles, says the same thing in the same words: "The character limit for a post is 3000 characters." LinkedIn's own developer documentation agrees a third time: the UGC Post API page says "The maximum length of the text of a UGC Post is 3000 characters." Three LinkedIn sources, one number, checked on 21 November 2026.
The About limit is documented once, on LinkedIn's Talent Blog, in a guide to profile summaries dated 30 April 2024, which calls the About section "an open-ended space (sort of; 2,600 characters max)". No LinkedIn help page states the figure, and LinkedIn's own profile advice suggests keeping the section to one or two paragraphs, far short of the ceiling. The number is also the limit the profile editor enforces, which is how most guides confirm it: paste 2,601 characters into the About box and the editor stops you. Because the figure comes from a blog post rather than a help page, and because LinkedIn changes limits without notice, this counter re-checks the figure every year and says so on the page.
Two things about these limits are worth knowing before you plan around them. First, the limits are the same for free accounts and Premium accounts: paying does not buy more characters in a post or in the About section. Second, the limits are ceilings, not targets. A post of 3,000 characters is about 500 words of ordinary English, at about six characters a word including the space after it, and an About section of 2,600 characters is about 430 words. Most posts that get read are far shorter than the ceiling, and most About sections that get read are two or three short paragraphs. The counter tells you where you stand against the ceiling; it does not tell you to fill it.
What LinkedIn does not publish
LinkedIn publishes no fold numbers at all. It does not say how many characters show before the see more link on a post, on desktop or on a phone, and it does not say how much of the About section shows before its see more link. Every fold number in this counter is a measurement made by someone else, and the counter says "about" every time it uses one. LinkedIn also publishes no counting rule: it does not say whether an emoji counts as one character or two, whether a flag counts as one or four, or whether a link counts at its full length or its shortened length. The counter handles the unknown honestly, by showing the strictest count next to the visible count and warning when the two disagree near the limit. And LinkedIn publishes no limit for comments on ordinary posts, which is why the table marks the comment figure as less firm: 1,250 is stated for group comments, and the figure for ordinary comments is inferred from testing rather than stated anywhere.
The see more fold
The fold is the most important number in this counter after the limit itself, because it decides what a reader actually sees. LinkedIn shows the first part of a post in the feed and hides the rest behind a see more link. Most readers never click it. A post whose point sits behind the fold is a post whose point most readers never reach, however good the writing is.
The post fold: about 210 on desktop, about 140 on a phone
The post fold falls at about 210 characters on desktop and about 140 characters in the mobile app, by community measurement. Those figures come from publishers who measured the feed directly, most recently AuthoredUp, whose measurement was updated on 11 August 2026, and Eden, whose estimate matches it. LinkedIn publishes no figure, so treat both numbers as approximate: the exact cut moves with the screen width, the font size, and the device. The fold is really a number of lines, about three, and the character count is a rough translation of those lines into characters. That is why a line break moves the fold earlier: a blank line, or a very short line, uses up one of the three visible lines without showing much text.
The gap between the two folds matters. A post of 200 characters shows whole on desktop and folds on a phone, and most LinkedIn reading happens on phones. The safe habit is to write for the mobile fold: put the point, the hook, or the question in the first 140 characters, so it shows everywhere. The counter shows both previews side by side for exactly this reason. When the mobile preview cuts your sentence in half, the fix is usually to move the point earlier, not to cut words from the end.
Attachments change the fold too. A post with an image or a video shows about three lines of text, which is roughly the mobile fold, even on desktop. A document post and a poll behave the same way. The counter cannot know what you will attach, so its fold preview assumes a text post. If you plan to attach media, write for the mobile fold even on desktop.
The About fold: about 265 characters
The About section folds at about 265 characters, by the same kind of measurement. Observed estimates run from about 200 to about 300 characters, depending on the screen, and 265 sits in the middle of that range. On a profile page, only the first two or three lines show before the see more link, so the opening of the About section does the same job as the opening of a post: it has to earn the click. The difference is the audience. A post is read by people scrolling a feed, who owe you nothing. An About section is read by someone who has already opened your profile, which means they are already interested. The fold still matters, but the reader on the other side of it is warmer.
LinkedIn's own advice for the About section is to keep it to one or two paragraphs, and its Talent Blog guide adds two points about form: break the text into short paragraphs or lists so readers can skim, and make the first sentence count instead of opening with a greeting. A section of 238 characters, like the sample this tool loads, shows whole before the fold and reads in under a minute. A section that uses the full 2,600 characters is a long read on a profile page, and most of it sits behind the fold. The counter shows the fold so you can decide how much of the section a visitor reads before choosing to read more.
Writing for the fold
Three habits make the fold work for you instead of against you. First, open with the point, not the setup. A first line that states the result, the question, or the surprise earns the click; a first line that sets the scene spends the visible characters on background. Second, keep the first lines short. A first line of 140 characters or fewer shows whole on a phone, and a first line that ends on a complete sentence reads as a finished thought rather than a cut-off fragment. Third, treat the fold as a cliffhanger, not a wall. The text just before the fold should make the reader want the rest: a number without its explanation, a claim without its proof, or a question without its answer. The fold preview in this counter is the place to test all three habits, because it shows exactly what the reader sees before deciding.
How LinkedIn counts characters
LinkedIn counts every character you type toward the limit, as far as anyone can tell from the outside. Spaces count. Line breaks count. Hashtags count, including the hash sign. Mentions count, including the at sign. Emoji count, though nobody outside LinkedIn knows exactly how. The only honest statement about LinkedIn's counting is that most of it is documented by the limit itself and the rest is not documented at all, so the counter counts strictly and shows its working.
Spaces and line breaks
Every space counts as one character, and every line break counts as one character. That includes the blank line between two paragraphs, which is one more character for the empty line itself. A post with five short paragraphs and a blank line between each one spends four characters on blank lines alone. It is a small number, but it is exactly the kind of small number that pushes a draft from 2,999 to 3,001. The counter counts line breaks as characters because LinkedIn does, and the lines card shows how many lines the text has, so you can see where the breaks are going.
One quirk is worth knowing if you paste a draft into LinkedIn from another app. LinkedIn's composer drops a line that is completely empty when you paste, so paragraphs can run together into one block. Writers who paste from a notes app sometimes find their careful paragraph breaks gone. The usual fix is to put a single invisible character, a blank Braille pattern, on each empty line, which LinkedIn keeps. Each of those invisible characters adds one to the length LinkedIn sees, so if your post is close to 3,000, leave one spare character for every empty line. This counter counts the characters you paste, including any invisible ones, so a draft with Braille-pattern blank lines counts exactly as LinkedIn will see it.
Emoji
Emoji are where counting gets uncertain, because an emoji is one visible character and several stored characters at once. A simple emoji, such as a smiling face, is one code point and two UTF-16 code units. A flag is two code points and four UTF-16 code units. A family emoji is five code points and eight UTF-16 code units. An emoji with a skin tone is two code points and four UTF-16 code units. A letter with a combining accent is two code points and two UTF-16 code units. The counter counts each of these as one visible character, because that is what the reader sees, and it reports the UTF-16 count alongside, because that is the count a strict enforcement would use.
The practical rule is simple: if your draft has no emoji, the counts agree and there is nothing to worry about. If it has emoji, watch the strictest count as well as the headline count, and leave a margin equal to the gap between them. A draft with ten ordinary emoji has a gap of ten characters between the visible count and the strict count. A draft with ten flags has a gap of thirty. The counter computes the gap for you and warns when the strict count crosses the limit, so the margin is never a guess.
Styled letters
Some writers format LinkedIn posts with styled Unicode letters, the mathematical bold and italic alphabets, because LinkedIn has no bold or italic button. Each styled letter is a character outside the basic set, which means it counts as one visible character and two UTF-16 code units. A post written entirely in styled bold letters is twice as long under the strict count as under the visible count, and a post of 1,600 styled characters is already over the limit by the strict count. Styled letters also break screen readers, which read them as mathematical symbols rather than words, so they cost accessibility as well as characters. The counter counts them honestly, one visible character each, and the strict count shows the real cost.
Links
A link counts toward the limit at its full length, as far as anyone can tell, because LinkedIn shortens links only after you click Post. LinkedIn's own help page on short URLs says that a link longer than 26 characters is automatically shortened once you click Post, to make it easier to read. What the page does not say is whether the long form or the short form counts toward the 3,000. The counter counts the full link, because that is the safe assumption: a draft that fits with the full link fits either way, and a draft that only fits with the shortened link might not fit at all. If your draft is close to the limit and contains a long link, the counter's near-limit warning says so, and the honest fix is to put the link in the first comment instead, which is also where many writers put links for reach.
Mentions and hashtags
A mention counts at its full length, including the at sign, and a hashtag counts at its full length, including the hash sign. There is no discount for either. A post with five hashtags of ten characters each spends 55 characters on hashtags alone, including the spaces before them. Mentions have one extra wrinkle: when you type an at sign in LinkedIn's composer and pick a person from the list, LinkedIn stores the mention as a link to that person, but the visible text still counts toward the limit. The counter counts mentions and hashtags by pattern, an at sign or hash sign followed by letters and numbers, and it does not count the at sign in an email address as a mention, because the address is not a mention.
Features
The counter is built around the two fields and the two questions every LinkedIn writer asks: does it fit, and what shows before the fold. Everything else in the tool serves one of those two questions.
- Two fields, one tool. Switch between a post and an About section with one dropdown. The limit, the fold points, the preview, and the guidance all change with the field, so you never have to remember which limit applies where.
- Grapheme counting. Each visible character counts once, using the Unicode standard for grapheme clusters. A flag is one character, a family emoji is one, and an accented letter is one. The method is reported on every result, so the count is never a mystery.
- Three counts side by side. The visible count, the code-point count, and the strictest UTF-16 count are all reported, with the gap between them. When the counts disagree near the limit, the counter warns you instead of letting you find out from LinkedIn.
- Fold previews for both screens. A post gets a desktop preview at about 210 characters and a mobile preview at about 140. An About section gets a profile preview at about 265. Each preview shows the visible text, the ...see more marker, and how many characters hide behind the link.
- Full working, printed. The steps section shows the character count, the remaining count, the share of the room used, the fold arithmetic, and the word, sentence, line, paragraph, hashtag, mention, and link counts. Every number can be checked by hand.
- Live counting. The count updates on every keystroke, so trimming a draft is a live exercise rather than a cycle of paste, count, and re-paste. The Count button re-runs the count on demand, and the sample button loads a realistic draft for either field.
- Private by design. The count runs entirely in your browser. Nothing you paste is sent to a server, stored, or logged, which matters for drafts you have not published yet.
- Honest about what it does not know. The fold points are labeled approximate on every result, the counting rule is stated with its limits, and the sources carry their dates. A counter that pretends to certainty it does not have is worse than no counter at all.
Use cases
The counter earns its place in four kinds of writing, each with a different reason to care about the count.
Writing a feed post
A feed post is the everyday case. You have a result to share, a lesson to pass on, or a question to ask, and you want it to fit in one post without being cut off mid-thought. The counter tells you how much room you have and where the fold falls, so you can put the point first and the detail behind the fold. If the draft runs over, the counter tells you the exact number to cut, which turns trimming from a vague chore into a concrete target. For timing, pair the counter with our Best Time to Post Planner, which picks the best posting time for LinkedIn and eight other platforms, and after the post goes out, our Engagement Rate Calculator scores it against the LinkedIn benchmark.
Rewriting your About section
An About section is read by people who have already opened your profile, which makes it the highest-intent text on LinkedIn after your headline. The counter helps you shape it: the fold preview shows what a visitor reads before choosing to read more, and the count keeps you honest about length. Most strong About sections run between 900 and 1,600 characters, three to five short paragraphs, which is well inside the 2,600 limit and far past the 265 fold. The counter shows both numbers, so you can see how much of the section a visitor reads for free and how much they have to ask for. If you are also setting up a profile on another platform, our Instagram Username Checker checks a handle against Instagram's rules before you commit to it.
Running a company page
Posts from a Company Page go through the same share box and get the same 3,000-character limit as posts from a personal profile, so the counter works the same way for both. Page posts are usually written by a team, reviewed by a second person, and scheduled in advance, which makes a counter with printed working more useful than a bare number: the steps section gives the reviewer the same figures the writer saw, and the fold preview settles arguments about where the call to action belongs. If the page also runs paid campaigns, our LinkedIn Ads Budget Calculator plans the budget for them.
Drafting posts in bulk
Writers who draft a week of posts in one sitting need a counter that is fast and repeatable. Paste a draft, read the verdict, trim to the target, move on. The live count means the trimming happens in the same pass as the writing, and the sample button gives a known-good draft to calibrate against. For longer text of any kind, our Word Counter counts words, sentences, and reading time, and for messages on other platforms, our WhatsApp Text Formatter formats bold, italic, strikethrough, and monospace text for WhatsApp.
What to do when you are over the limit
An over-long draft has four exits, and the right one depends on what the extra characters are doing. The counter tells you how many characters you are over; this section tells you what to do with that number.
Cut first
Most drafts have padding, and cutting is the fastest exit. Start with the words that do no work: throat-clearing openers, repeated points, and adjectives that restate the noun. Then cut the weakest paragraph, not the longest one. A draft that is 42 characters over usually needs one sentence trimmed, not a rewrite. A draft that is 500 over needs a paragraph removed or a section turned into a list. The live count makes this a game with a visible score: watch the remaining count climb as you cut, and stop when it turns positive with a small margin.
Move the rest into the first comment
When the extra part is a source, a footnote, or a link, it can live in the first comment instead of the post. A comment on a post can hold about 1,250 characters, which is room for a generous footnote, and the post itself stays inside the limit. This is also where many writers put links, because a link in the post counts toward the limit at its full length and a link in the comment does not count against the post at all. The trade-off is that a reader has to open the comments to find the extra material, so the post itself has to stand alone.
Split the post
When the draft is two posts wearing one coat, split it. A draft of 4,000 characters is often two posts of 2,000, each with its own point and its own hook, and two posts reach more people than one long one. The split works best when each half has a complete thought: a lesson and its example, a problem and its fix, a claim and its proof. If the halves only make sense together, splitting is the wrong exit, and the article is the right one.
Write an article instead
LinkedIn's own suggestion for a post over 3,000 characters is to write an article instead, and it is good advice when the piece needs headings, needs to be found later, or is simply long. Articles allow up to 125,000 characters, which is about 20,000 words, so a 4,000-character draft fits with room to spare. The trade-off is distribution: a post goes into the feed at once, while an article lives on your profile and needs a post to point at it. The usual pattern is to publish the article, then write a short post about it with a link, which is two pieces of content from one draft. The counter checks the short post; the article needs no counter.
Sources
Every figure on this page was checked against LinkedIn's own pages on 21 November 2026, or is marked as coming from somewhere else. LinkedIn changes its limits without notice, so the figures are re-checked every year, and the next review is due on 19 May 2027.
- LinkedIn Help: Post and share updates — "Posts can contain up to 3,000 characters." Checked 21 November 2026. The page was last updated about one month before the check.
- LinkedIn Help: Differences between posting updates and publishing articles — "The character limit for a post is 3000 characters" and "Articles are typically longer than posts and are limited to 125,000 characters." Checked 21 November 2026.
- LinkedIn Talent Blog: 14 LinkedIn Profile Summary Examples (and 14 Best Practices) — the About section is "an open-ended space (sort of; 2,600 characters max)". Dated 30 April 2024, checked 21 November 2026.
- LinkedIn developer documentation: UGC Post API — "The maximum length of the text of a UGC Post is 3000 characters." Checked 21 November 2026.
- LinkedIn Help: Short URLs in shared posts — a link longer than 26 characters is shortened once you click Post. Checked 21 November 2026.
- AuthoredUp, community measurement of the post fold, updated 11 August 2026 — about 210 characters on desktop and about 140 on mobile. LinkedIn publishes no fold figures; this is a measurement, not a specification.
- LinkedIn Talent Blog, "10 LinkedIn Profile Headlines to Inspire Your Own", 27 February 2025 — the headline limit is 220 characters. The Help Center gives no number for the headline.
Frequently asked questions
What is the LinkedIn post character limit?
A LinkedIn post can hold up to 3,000 characters, including spaces, line breaks, and emoji. LinkedIn states the figure on its Help page on posting updates, and its developer documentation for the UGC Post API states the same ceiling. A post from a Company Page has the same limit, because it goes through the same share box. If your draft runs longer, LinkedIn suggests writing an article instead, which allows up to 125,000 characters. This counter checks your draft against the 3,000 limit and tells you exactly how many characters you have left or how many you are over.
How many characters can the LinkedIn About section have?
The About section on your profile can hold up to 2,600 characters, about 430 words of ordinary English. The figure comes from LinkedIn's Talent Blog guide to profile summaries, dated 30 April 2024, which calls the section "an open-ended space (sort of; 2,600 characters max)". LinkedIn's Help Center gives no number for the About section, and its profile advice suggests keeping it to one or two paragraphs, far short of the ceiling. Only about the first 265 characters show before the see more link, so the opening lines matter more than the limit.
Where does LinkedIn cut a post with see more?
LinkedIn folds a post after about 210 characters on desktop and about 140 characters in the mobile app, by community measurement. LinkedIn publishes no fold numbers, so both figures are approximate, and the exact cut moves with the screen width and the font size. The fold is really about three lines of text, so a line break moves it earlier, and a post with an image or a video folds at about three lines even on desktop. Write for the mobile fold: put the point in the first 140 characters and it shows everywhere. This counter previews both folds as you type.
How does LinkedIn count emoji toward the limit?
LinkedIn does not say. It publishes no counting rule for emoji, styled letters, or combined characters, so nobody outside LinkedIn knows whether a flag counts as one character or four. This counter counts each visible character once, so a flag counts as one, a family emoji counts as one, and a letter with an accent counts as one. It also reports the strictest count, the UTF-16 code-unit count, where most emoji count 2 and a flag counts 4, and it warns you whenever the strict count would be over the limit while the visible count fits. Near the limit, leave a margin equal to the gap between the two counts.
Do spaces and line breaks count toward the LinkedIn limit?
Yes. Every space counts as one character, and every line break counts as one character, including the blank line between two paragraphs. A post with five short paragraphs and a blank line between each one spends four characters on blank lines alone. It is a small number, but it is exactly the kind of small number that pushes a draft from 2,999 to 3,001. This counter counts spaces and line breaks, and its lines card shows how many lines the text has. One quirk: LinkedIn's composer drops a completely empty line when you paste, so writers sometimes put an invisible Braille-pattern character on empty lines, and each of those adds one to the length.
Does a link count toward the LinkedIn character limit?
Yes, at its full length, as far as anyone can tell. LinkedIn shortens links longer than 26 characters, but only after you click Post, and it does not say whether the long form or the short form counts toward the 3,000. This counter counts the full link, because that is the safe assumption: a draft that fits with the full link fits either way. If your draft is close to the limit and contains a long link, the counter warns you. The usual fix is to put the link in the first comment, where it does not count against the post at all.
What should I do when my post is over 3,000 characters?
Cut first, then move, split, or upgrade. Most drafts have padding, and a draft that is a few dozen characters over usually needs one sentence trimmed. If the extra part is a source or a footnote, move it into the first comment, which can hold about 1,250 characters. If the draft is really two posts, split it, because two posts reach more people than one long one. And if the piece needs headings or needs to be found later, follow LinkedIn's own suggestion and write an article instead, which allows up to 125,000 characters, then write a short post pointing at it.
Is the About section fold different from the post fold?
Yes. The About section folds at about 265 characters, showing the first two or three lines on your profile before the see more link, while a post folds at about 210 characters on desktop and about 140 on a phone. The About fold is a single approximate figure, and observed estimates run from about 200 to about 300 characters depending on the screen. The audience differs too: a post is read by people scrolling a feed, while an About section is read by someone who has already opened your profile. Either way, the opening lines have to earn the click, and this counter previews the fold for both fields.