Skip to content

Pollinator Garden Planner

Native plants are regional. Pick the region your garden sits in and the plan lists species native there, with bloom months from the Xerces Society regional lists.

The area you plan to plant, 10 to 43,560 square feet. Measure length times width for a bed. A 4 by 8 foot bed is 32 square feet.

Count the hours of direct sun the planting area gets on a clear day.

Pick one pollinator group and the plan puts its favorite flowers first in each season. Pick all three for the widest mix.

Host plants feed caterpillars: milkweed for monarchs, and a second host plant for your region. Expect chewed leaves. That is the plan working.

Change this to your local nursery price for a one-gallon perennial. The estimate follows it.

Leave blank for no budget. Enter a number and the plan tells you whether the estimated cost fits it.

Your pollinator garden plan

How the numbers were worked out

      This tool provides estimates for general guidance only. Regional plant lists are a starting point: confirm that each species is native to your county with your state native plant society or the Lady Bird Johnson Wildflower Center database before planting, check local nursery prices before buying, and never plant a species listed as invasive in your state.

      A pollinator garden works when something blooms in every month from March through October, not when it holds the longest plant list. Enter your region, planting area, sun, pollinator focus, and host-plant mode, and this planner builds the three-season sequence, three native species for spring, summer, and fall, counts the plants at 2 foot spacing, prices them, and scores the bloom month by month, naming every gap.

      Last reviewed: 21 November 2026

      How to use the Pollinator Garden Planner

      A pollinator garden is not a flower bed with a few bee-friendly plants in it. It is a planting plan built around a sequence: something in bloom in every month from early spring through fall, so bees, butterflies, and hummingbirds find food whenever they are active. A garden that is spectacular in July and bare in April and September feeds almost nobody for half the season. This planner fixes that by building the sequence first and the plant list second.

      Enter your region, the size of the area you plan to plant, how much sun it gets, which pollinators you want to plan for, and whether to include host plants. The planner returns a three-season plan: three native species for spring, three for summer, and three for fall, each with its bloom months, the pollinators it serves, and how many plants to buy. It counts the plants, prices them at the per-plant cost you enter, checks the plan against your budget, and scores the bloom sequence itself, month by month, from March through October. If a month has no flowers, the plan names the gap and tells you what kind of plant fills it.

      The region matters more than any other input. Native plants are regional: a species that thrives in the Southeast may not survive a Mountain West winter, and a Southwest desert plant will drown in Pacific Northwest rain. The planner holds a separate plant table for each of eight regions, drawn from the Xerces Society regional pollinator plant lists and the Pollinator Partnership planting guides. Pick the region your garden sits in, and every species in the plan is native there. The plan still tells you to confirm each species with your state native plant society before buying, because native range varies by county, and a species native to your region may not be native to your exact county.

      The planting area is the ground you plan to plant, measured in square feet. For a rectangular bed, multiply length by width: a 4 by 8 foot bed is 32 square feet, a 10 by 10 foot bed is 100 square feet. For an irregular bed, sketch it as rectangles and add them up, or pace it off and estimate. The planner accepts 10 to 43,560 square feet, which is 1 acre. A bed smaller than 10 square feet is a pot or two, not a garden plan, and the planner will tell you so.

      Sun is measured in hours of direct sun on a clear day. Full sun means 6 or more hours. Partial sun means 3 to 6 hours. Full shade means under 3 hours. Count the hours the planting area itself gets, not the yard as a whole: a bed under a maple may sit in full shade while the lawn ten feet away bakes. If you are between two values, pick the lower one. A plant listed for full sun will still grow in partial sun, but it will bloom less, and a plan built on honest shade is worth more than a plan built on wishful sun.

      The pollinator focus changes which species the plan puts first in each season. Pick bees and the plan leads with the strongest bee flowers. Pick butterflies and it leads with butterfly nectar plants. Pick hummingbirds and it leads with tubular red and orange flowers. Pick all three and the plan balances the mix. The focus reorders species within each season; it never drops a season, because the sequence is the point.

      Host plants are the second half of a pollinator garden, and the part most plans skip. A nectar plant feeds an adult butterfly. A host plant feeds its caterpillars. Without host plants, butterflies visit your garden and breed somewhere else. Switch host plants on and the plan adds two host plants for your region, three plants of each, with the caterpillars they feed named. Milkweed for monarchs is the best known pair, but every region has its own: golden alexanders for black swallowtails in the Northeast and Midwest, wild lupine for Karner blues in the Midwest, Rocky Mountain penstemon for checkerspots in the Mountain West, and elegant clarkia for Clark's sphinx moth in California.

      The price per plant is the only cost input. The default is 12 dollars, a typical price for a one-gallon native perennial at a nursery. Change it to your local price and the estimate follows it. The budget is optional: leave it blank and the plan is costed in full, or enter a number and the plan tells you whether the estimate fits it, and by how much it is over or under.

      Try the example buttons under the form to see the planner work: a 100 square foot Northeast bed in full sun, a 500 square foot Southeast bed with host plants, and a 100 square foot Southwest bed planned for hummingbirds. Each one fills the form and builds the plan in one click.

      How the plan works

      The plan is built on the 3x3x3 rule: three species blooming in each of spring, summer, and fall, with at least three plants of each species. Three species per season means that if one species has a bad year, two more still bloom. Three plants of each species means each species forms a drift big enough for a passing bee to notice. Nine species and at least 27 plants is the smallest plan that holds the sequence together, and the planner scales it up from there as the area grows.

      The planting area is split across the three seasons by share: spring gets 30 percent, summer gets 40 percent, and fall gets 30 percent. Summer gets the largest share because it is the longest season and the peak of pollinator activity. Each season's share is divided by its three species, and each species is planted at 2 foot spacing, which is 4 square feet per plant. The count per species is the season area divided by 3, divided by 4, rounded down, with at least 1 plant of each species. That is the whole arithmetic, and every number in the plan follows from it.

      Worked example one: a 100 square foot Northeast garden in full sun, planned for all three pollinator groups, nectar only, at 12 dollars per plant. Spring gets 30 square feet, summer gets 40, fall gets 30. Spring: 30 divided by 3 is 10 square feet per species, divided by 4 is 2.5, rounded down to 2 plants of each spring species, 6 spring plants in total. Summer: 40 divided by 3 is 13.33, divided by 4 is 3.33, rounded down to 3 plants of each summer species, 9 summer plants. Fall: the same as spring, 2 of each, 6 fall plants. Total: 21 plants of 9 species for an estimated 252 dollars. The spring species are golden alexanders, eastern columbine, and spiderwort. The summer species are swamp milkweed, wild bergamot, and purple coneflower. The fall species are New England aster, showy goldenrod, and bottle gentian. The bloom sequence runs April through October, with 5 of the 8 months holding at least 3 species in bloom, and March empty: no species in this plan blooms in March.

      Worked example two: a 500 square foot Southeast garden in full sun, planned for all three pollinator groups, with host plants, at 12 dollars per plant. Spring gets 150 square feet, summer gets 200, fall gets 150. Spring: 150 divided by 3 is 50, divided by 4 is 12.5, rounded down to 12 plants of each spring species, 36 spring plants. Summer: 200 divided by 3 is 66.67, divided by 4 is 16.67, rounded down to 16 of each, 48 summer plants. Fall: 12 of each, 36 fall plants. That is 120 nectar plants, plus 6 host plants: 3 butterfly milkweed and 3 partridge pea. Total: 126 plants of 11 species for an estimated 1,512 dollars. The bloom sequence is full: every month from March through October has at least 3 species in bloom, with 9 species in bloom in June, July, and August.

      Worked example three: a 4 by 8 foot bed, 32 square feet, in the Northeast in full sun, nectar only, at 12 dollars per plant. Spring gets 9.6 square feet, summer gets 12.8, fall gets 9.6. Spring: 9.6 divided by 3 is 3.2, divided by 4 is 0.8, rounded down to 0, raised to the minimum of 1 plant of each spring species, 3 spring plants. Summer: 12.8 divided by 3 is 4.27, divided by 4 is 1.07, rounded down to 1 of each, 3 summer plants. Fall: 1 of each, 3 fall plants. Total: 9 plants of 9 species for an estimated 108 dollars. The sequence is the same nine species as the 100 square foot plan, so the bloom months are identical, but every drift is a single plant, and the plan warns you about that: a lone plant is hard for a pollinator to find, and the plan recommends 3 of each species when space allows. A 32 square foot bed cannot hold 27 plants at 2 foot spacing, so the honest plan is 9 singles with a warning, not 27 plants crammed into ground that cannot hold them.

      The drift threshold is worth knowing. At 2 foot spacing, a season needs 36 square feet to give each of its 3 species a drift of 3 plants. Spring holds 30 percent of the area, so the whole bed needs 120 square feet before the spring drifts reach 3 plants each. At 120 square feet the smallest drift in the plan is 3 plants and no drift warning appears. At 119 square feet the spring drifts drop to 2 plants each and the warning appears. The summer drifts reach 3 plants sooner, at 90 square feet, because summer holds the larger share. If your bed is between 90 and 120 square feet, expect the warning: it is the spring and fall drifts that are thin, not the summer ones.

      The bloom score is computed from the nine species actually chosen, not from the full table. For each month from March through October, the planner counts how many of the nine species are in bloom that month. A month with at least one species in bloom counts as covered. A month with at least 3 species in bloom counts as a deep month. The band follows the deep months: 8 deep months is a Full-season bloom, 6 or 7 is a Strong sequence, and 5 or fewer is a Good start. The band is about depth, not coverage: a plan can cover 7 months and still be a Good start if most of those months lean on 1 or 2 species. The Northeast 100 square foot plan above covers 7 months but has only 5 deep months, so it is a Good start. The Southeast 500 square foot plan covers all 8 months with all 8 deep, so it is a Full-season bloom.

      Gaps are named, not hidden. If no species in the plan blooms in a month, that month is listed as a gap, and the guidance names the kind of plant that fills it: an early-season bloomer, such as a native willow, which flowers before most perennials. The March gap is the most common one. In the Northeast, Midwest, Great Plains, and Mountain West, almost nothing in the perennial tables blooms in March, because spring arrives late there. The Southeast, Southwest, and California plans have no March gap: their spring species open in March. If your plan shows a March gap and you want to close it, the cheapest fix is a native tree or shrub that flowers early, not another perennial.

      The bloom sequence: why months matter more than species

      Most pollinator garden advice is a list of plants. Lists fail because they ignore time. Ten species that all bloom in July give pollinators a feast in July and nothing in April or September. A queen bumble bee emerging from hibernation in April needs flowers in April, not a promise of July coneflowers. A monarch migrating south in September needs nectar in September. The sequence is the garden: the species are just the way to build it.

      The planner scores the sequence on two numbers. The first is coverage: how many of the 8 months from March through October have at least one species in bloom. The second is depth: how many of those months have at least 3 species in bloom. Depth matters because different pollinators need different flowers. A month with one species in bloom feeds the pollinators that use that species and nobody else. A month with three species in bloom feeds short-tongued bees, long-tongued bees, butterflies, and hummingbirds at once, because the three species have different flower shapes, colors, and nectar depths. Three is also the number the Xerces Society uses: an effective pollinator planting has at least three species blooming at any given time during the season.

      The month-by-month table below shows the Northeast 100 square foot plan from the worked example. Read across it the way a bee experiences the garden: March is empty, April has 2 species, May has 3, June has 4, July has 3, August has 6, September has 4, and October has 2. The plan is thin at both ends and rich in the middle, which is the honest shape of a Northeast perennial garden. The fix for March is an early tree or shrub. The fix for October is more asters and goldenrod, which are already the fall species: planting more of them thickens October without changing the plan.

      MonthSpecies in bloomWhat is flowering
      March0Nothing in this plan. The gap month.
      April2Golden alexanders, eastern columbine
      May3Golden alexanders, eastern columbine, spiderwort
      June4Golden alexanders, spiderwort, swamp milkweed, purple coneflower
      July3Swamp milkweed, wild bergamot, purple coneflower
      August6Swamp milkweed, wild bergamot, purple coneflower, New England aster, showy goldenrod, bottle gentian
      September4Purple coneflower, New England aster, showy goldenrod, bottle gentian
      October2New England aster, showy goldenrod

      Compare that with the Southeast 500 square foot plan, where the count runs 4, 4, 4, 9, 9, 9, 3, 3 across March through October. The Southeast spring species bloom for six months each: redring milkweed, lanceleaf coreopsis, and white wild indigo all run March through August, and purple coneflower runs March through August as a summer species. Long bloom windows are what make a full-season plan possible. In the Northeast, the spring species bloom for two or three months each, so the sequence needs more species to cover the same ground. That is why the planner picks three species per season instead of one long bloomer: short windows overlap into a long season.

      One warning about bloom months: they shift. A species listed for April may open in March in a warm year or in a sheltered spot against a south wall, and a species listed through October may be cut short by an early frost. The bloom months in this planner come from the Xerces Society regional lists, which give bloom as Early, Early-Mid, Mid, Mid-Late, or Late, mapped to months, with exact months where the Southeast list gives them. They describe a typical year in the middle of the region. Your garden will differ by a week or two in either direction, and the plan is built to absorb that: with three species per season, a one-week shift in one species does not open a gap.

      What the plan chooses for each region

      Each region has four species per season in the table, and the planner picks three. The fourth is a reserve: it enters the plan when the focus or the sun rules out one of the first three. The table below names the three the planner picks for a full-sun garden planned for all three pollinator groups, which is the default plan for every region.

      RegionSpringSummerFall
      NortheastGolden alexanders, eastern columbine, spiderwortSwamp milkweed, wild bergamot, purple coneflowerNew England aster, showy goldenrod, bottle gentian
      SoutheastRedring milkweed, lanceleaf coreopsis, white wild indigoButterfly milkweed, purple coneflower, buttonbushSwamp sunflower, bearded beggarticks, flat-top goldentop
      MidwestLanceleaf coreopsis, wild lupine, foxglove beardtongueButterfly milkweed, purple coneflower, wild bergamotNew England aster, showy goldenrod, rattlesnake master
      Great PlainsPurple prairie clover, blacksamson echinacea, stiff tickseedButterfly milkweed, hoary verbena, blanketflowerPrairie blazing star, showy goldenrod, New England aster
      Mountain WestRocky Mountain penstemon, pale evening primrose, silvery lupineHorsetail milkweed, blanketflower, upright prairie coneflowerRubber rabbitbrush, showy goldenrod, New England aster
      SouthwestDesert globemallow, spider milkweed, southwestern mock vervainBlue mistflower, common sunflower, Arizona thistleLyreleaf greeneyes, desert marigold, autumn sage
      Pacific NorthwestCommon camas, bigleaf lupine, Douglas meadowfoamMeadow checkermallow, yarrow, showy milkweedPearly everlasting, Douglas aster, goldenrod
      CaliforniaCalifornia poppy, baby blue eyes, lacy phaceliaNarrowleaf milkweed, Cleveland sage, foothill penstemonCalifornia goldenrod, California fuchsia, mountain coyotemint

      Some species appear in more than one region, and that is correct: purple coneflower is native from the Northeast to the Great Plains, New England aster runs from the Northeast to the Mountain West, and showy goldenrod covers the same ground. A species that appears in your region's plan is native to your region; a species that appears in a neighboring region's plan may or may not be native to yours, which is why the planner never borrows across regions.

      The focus changes the picks. In the Midwest, a plan for all pollinators picks lanceleaf coreopsis, wild lupine, and foxglove beardtongue for spring, and the fourth spring species, golden alexanders, stays in reserve. A plan for butterflies puts the butterfly-serving species first: coreopsis, lupine, and golden alexanders, which pushes foxglove beardtongue out. Golden alexanders blooms April through June, so the butterfly plan covers April and the all-pollinator plan does not. The focus is not cosmetic: it changes which months are covered, and the plan scores the result honestly either way.

      Sun changes the picks more sharply. In full sun, every season in every region has at least three matching species, so the plan is built entirely from strong matches. In partial sun, some seasons have only one or two matches, and the planner fills the gap with the closest options from the same region and season, then warns you that those are fallback picks to confirm locally. In full shade, almost no species in the tables matches, and the plan is mostly fallback picks. That is honest: very few native pollinator perennials bloom well in full shade. The shade-tolerant exceptions in the tables are wild geranium and eastern columbine in the Northeast, blue mistflower in the Southeast fall, and western columbine in the Pacific Northwest. If your garden is in full shade, expect the plan to say so, and take the fallback warning seriously: a sun-loving plant in shade grows, but it blooms thinly, and thin bloom feeds few pollinators.

      Host plants: the second half of the garden

      Nectar plants feed adult pollinators. Host plants feed their young. A monarch butterfly can drink nectar from a hundred species, but it can only lay eggs on milkweed, because monarch caterpillars can only eat milkweed. The same is true, with different plants, for most butterflies: black swallowtail caterpillars eat golden alexanders and other carrot-family plants, Karner blue caterpillars eat wild lupine, checkerspot caterpillars eat penstemon, and sulphur caterpillars eat partridge pea and leadplant. A garden with nectar plants and no host plants is a restaurant with no nursery: butterflies visit, and breed somewhere else.

      The host-plant mode adds two host plants for your region, three plants of each. The first is always a milkweed for monarchs, chosen for the region: common milkweed in the Northeast and Midwest, butterfly milkweed in the Southeast and Great Plains, horsetail milkweed in the Mountain West, spider milkweed in the Southwest and Great Plains, showy milkweed in the Pacific Northwest, and narrowleaf milkweed in California. The second host plant is the region's other standout: golden alexanders in the Northeast, partridge pea in the Southeast, wild lupine in the Midwest, leadplant in the Great Plains, Rocky Mountain penstemon in the Mountain West, desert globemallow in the Southwest, bigleaf lupine in the Pacific Northwest, and elegant clarkia in California.

      Host plants are filtered by sun like everything else. If neither host plant in your region suits your sun, the plan adds no host plants and says so, rather than listing plants that will fail. In full shade, that is the usual result: no host plant in any regional table is a shade plant. In partial sun, most regions keep both host plants, because milkweeds and their companions mostly tolerate partial sun. The Pacific Northwest is the exception that proves the rule: showy milkweed needs full sun, so a partial-sun Pacific Northwest plan keeps only bigleaf lupine as its host plant, and the plan says so.

      Expect chewed leaves. A host plant doing its job looks damaged: caterpillars eat it. That is the plan working, not a pest problem, and the plan says so in its notes. Do not spray a host plant. Do not "tidy" the caterpillars off it. A milkweed stripped bare by monarch caterpillars in August is the best result a pollinator garden can produce, and the plant will regrow from its roots. If you cannot stand chewed leaves in the front bed, put the host plants in the back bed and the nectar plants in front: the butterflies will find both.

      One milkweed caution, from the Xerces Society and every monarch guide: plant the milkweed native to your region, not tropical milkweed. Tropical milkweed stays green through winter in warm regions, which lets a monarch parasite build up and disrupts migration timing. The milkweeds in this planner are all regional natives that die back in winter, which is the behavior monarchs evolved with. If a nursery sells you a milkweed that is not on your region's list, check its scientific name before buying: if it is Asclepias curassavica, it is tropical milkweed, and it does not belong in a temperate pollinator garden.

      For monarchs specifically, the number of milkweed plants matters more than the number of species. Our Monarch Caterpillar Milkweed Calculator works out how much milkweed a monarch brood actually eats, so you can check whether three milkweed plants are enough for the monarchs your garden attracts. For a garden planned around butterflies from the start, our Butterfly Garden Planner builds a butterfly-led plan with its own host-plant lists.

      Planting in drifts: why three of each beats one of everything

      A bee forages by sight and memory. A clump of five purple coneflowers is a landmark it can find from across the yard and return to all day. Five coneflowers scattered one per bed are five separate discoveries, each barely worth the flight. That is why the plan plants each species in a drift of at least three, and why it warns you when a drift falls below three: the plants are the same, but the foraging is not.

      Plant each species in one clump, not in a row and not scattered. A drift of three plants at 2 foot spacing covers roughly a 4 by 4 foot patch. A drift of twelve, like the spring drifts in the 500 square foot Southeast plan, covers roughly an 8 by 6 foot patch. Put the tallest species at the back of the bed and the shortest at the front, so nothing shades its neighbor out. In a bed you walk around, put the tallest in the middle and step down toward the edges.

      The 2 foot spacing in the plan is a planning figure for perennials, not a law of nature. It suits the medium perennials that make up most of the tables: coneflower, bee balm, milkweed, aster, goldenrod. Small species such as baby blue eyes and California poppy can go closer, at 1 foot spacing, and large species such as Joe Pye weed and buttonbush want 3 or 4 feet. If you plant a species closer or wider than the plan assumes, the count changes: at 1 foot spacing you need four times as many plants to fill the same ground, and at 3 foot spacing you need less than half. The planner keeps one spacing for all species so the arithmetic stays honest and checkable; a gardener who knows a species wants more room should give it more room and buy fewer plants, not follow the count blindly.

      First-year perennials look thin. A one-gallon coneflower planted in spring will bloom the same year, but it will not fill its 2 foot spacing until its second or third year. That is normal, and it is not a reason to plant closer. Perennials planted at their mature spacing look sparse in year one, full in year two, and crowded in year three, when you divide them and give the divisions away. Annuals fill the gaps in year one if the bare soil bothers you: California poppy, lacy phacelia, and partridge pea are annuals or short-lived perennials in the tables, and they bloom fast and reseed.

      Sun, shade, and fallback picks

      Every species in the tables carries the sun it grows in, and the planner matches on it before anything else. A species that needs full sun will not enter a partial-sun plan as a first choice. When a season has fewer than three matching species, the planner fills the season with the closest options from the same region and season, marks the season as a fallback, and warns you in the results. The fallback species are still native to your region and still bloom in the right season; they are just not the best match for your sun.

      Partial sun is where most fallback picks appear. In the Northeast, the fall season has only two partial-sun species, New England aster and bottle gentian, so a partial-sun plan fills the third fall slot with showy goldenrod, a full-sun plant, and warns you. In the Great Plains and Mountain West, partial sun produces fallback picks in all three seasons, because nearly every prairie and mountain pollinator plant in the tables is a full-sun plant. Those regions are open country: their native plants evolved in unbroken sun, and shade-tolerant pollinator perennials are genuinely scarce there.

      Full shade is harder still. The planner will still build a plan, because a shade garden with some pollinator plants is better than a shade garden with none, but almost every species in it will be a fallback pick, and the plan will say so three times, once per season. The honest advice for a full-shade garden is to lean on the few true shade species in the tables, wild geranium, eastern columbine, western columbine, and blue mistflower, and to accept that a shade garden will never match a sunny one for pollinator traffic. Shade also changes the host-plant picture: no host plant in any regional table is a shade plant, so a shade garden in host mode gets no host plants at all, and the plan says so rather than pretending.

      If your sun reading is uncertain, measure it before you plant, not after. On a clear day, note the time the sun first hits the bed and the time it leaves, and count the hours in between. Dappled light under a tree counts as partial sun at best, not full sun, even if the light is bright. Morning sun is gentler than afternoon sun, so a bed that gets 4 hours of morning sun behaves more like shade than a bed that gets 4 hours of afternoon sun. When in doubt, pick the lower sun value in the planner and read the fallback warnings as the plan telling you the truth.

      Soil is the input this planner does not ask for, and that is deliberate. The regional tables already encode the soil each species tolerates, because a species native to your region is adapted to your region's soils. Swamp milkweed wants wet ground and butterfly milkweed wants dry ground, and the planner picks between them by region and season, not by a soil question. If your soil is unusual for your region, a heavy clay in a sandy region or a dry slope in a wet one, check the soil notes for each species before buying. Our Soil Test Interpreter reads a soil test report and tells you what your soil actually is, which is worth doing once before you plant a large bed.

      Budget and cost

      The cost estimate is the total plant count times the price per plant you enter. Nothing else is in it: no soil, no mulch, no edging, no tools, no water. That is deliberate. Soil and mulch costs depend on what your ground already is, and a planner that guessed them would be wrong for most gardens. The plant bill is the part the planner can compute honestly, and it is usually the largest single cost of a new perennial bed.

      At the default 12 dollars per plant, the worked examples cost 108 dollars for a 4 by 8 foot bed, 252 dollars for a 100 square foot bed, 936 dollars for a 300 square foot California bed with host plants, and 1,512 dollars for a 500 square foot Southeast bed with host plants. The 300 square foot California figure is worth checking: 78 plants at 12 dollars is 936 dollars, and the 78 is 21 spring plants, 30 summer plants, 21 fall plants, and 6 host plants. If your nursery charges 15 dollars per gallon instead of 12, multiply every estimate by 1.25: the 100 square foot bed becomes 315 dollars and the 500 square foot bed becomes 1,890 dollars. The planner does that multiplication for you when you change the price.

      Three ways to cut the bill without cutting the sequence. First, plant in stages: build the spring and summer drifts this year and add the fall drifts next year, which is what the plan itself suggests when the estimate is over your budget. The sequence will be incomplete for one season, but the plants you do put in will be established and blooming by the time the fall drifts go in. Second, buy small: a quart-sized perennial costs half what a gallon costs and catches up within a year. Third, grow from seed for the species that start easily: lanceleaf coreopsis, purple coneflower, blanketflower, California poppy, and partridge pea all start readily from seed, and a packet of seed costs less than one plant. Our Wildflower Seeding Calculator works out seed quantities for a meadow-scale planting, and our Square Foot Garden Planner helps lay out a small bed plant by plant.

      The budget check is a simple comparison: if the estimate is at or under the budget, the plan fits, and the guidance names the amount to spare. If the estimate is over the budget, the plan names the overage and suggests staging. A budget exactly equal to the estimate counts as fitting: the 100 square foot Northeast plan at 252 dollars fits a 252 dollar budget exactly, with nothing to spare. Enter a budget of 251.99 dollars and the same plan is 1 cent over, which the plan reports as 1 cent over. The boundary is exact, not approximate, because a budget is a boundary.

      Features

      Eight regional plant tables, each with four species per season and two host plants, drawn from the Xerces Society regional pollinator plant lists and the Pollinator Partnership planting guides, re-checked 21 November 2026. Every species carries its bloom months, its sun needs, the pollinator groups it serves, and its host-plant role where it has one.

      A bloom-sequence score, not just a plant list. The plan counts species in bloom for each month from March through October, reports how many months are covered and how many hold at least 3 species, bands the sequence as Full-season bloom, Strong sequence, or Good start, and names every gap month.

      A pollinator focus that changes the plan. Pick bees, butterflies, or hummingbirds and each season leads with that group's flowers, which can change which months are covered. Pick all three for the balanced mix.

      A host-plant mode. Switch it on and the plan adds two regional host plants, three plants of each, filtered by sun, with the caterpillars they feed named. Switch it off and the plan is nectar only, with a note telling you what you are missing.

      Honest counts and honest cost. Counts follow one stated rule, 2 foot spacing with the season area split 30, 40, 30, rounded down, minimum 1 plant per species. Cost is the count times the price you enter. The budget check reports the exact overage or the exact amount to spare.

      Fallback warnings, not silent substitutions. When a season has no strong match for your sun, the plan says so, names the season, and tells you to confirm the closest options locally before buying.

      Use cases

      A first pollinator bed. A new gardener with a 4 by 8 foot bed wants to know what to plant and how much it costs. The planner returns 9 plants of 9 species, one of each, for 108 dollars at default prices, with the bloom sequence and the drift warning explained. The gardener buys the nine plants, plants them, and has a sequence from April through October in year one.

      A full front yard conversion. A homeowner replacing 500 square feet of lawn with native plants wants the whole sequence, host plants included, costed against a budget. The planner returns 126 plants of 11 species for 1,512 dollars in the Southeast, with a full-season bloom band and no gaps, and the budget check says whether the number fits.

      A butterfly garden with caterpillars in mind. A gardener who has watched monarchs visit but never stay wants host plants. Host mode on, focus butterflies, and the plan adds the regional milkweed and the second host plant, names the caterpillars they feed, and warns that chewed leaves are the plan working. Our Butterfly Garden Planner goes further in the same direction.

      A hummingbird garden. A gardener in California or the Southwest wants hummingbirds. Focus hummingbirds, and the plan leads with tubular flowers: Cleveland sage, foothill penstemon, and California fuchsia in California; Arizona thistle, ocotillo, and autumn sage in the Southwest. A feeder helps in the first year while the plants establish: our Hummingbird Nectar Calculator mixes the nectar at the right ratio.

      A school or community garden. A teacher planning a pollinator bed with students wants a plan that is explainable. The 3x3x3 rule is explainable to a ten-year-old: three flowers for spring, three for summer, three for fall, three of each. The month-by-month bloom table is a classroom chart, and the host plants give the class caterpillars to watch.

      A shady yard, honestly assessed. A gardener with a tree-covered yard wants to know what is possible. The planner builds the plan, marks the fallback seasons, and reports that no host plant suits full shade. The gardener plants the true shade species, accepts a thinner sequence, and does not waste money on sun plants that would bloom thinly or not at all.

      A bird garden that also feeds pollinators. The same native plants that feed pollinators feed birds: coneflower seed feeds goldfinches, aster seed feeds sparrows, and the caterpillars on host plants feed nestling birds. Our Bird-Friendly Garden Planner layers these plants for birds, and our Companion Planting Planner pairs pollinator plants with vegetables. For watering the new bed through its first summer, our Garden Watering Calculator works out how much water it needs.

      Sources

      Plant lists, bloom windows, sun needs, and host-plant roles come from the Xerces Society regional pollinator plant lists and monarch nectar plant guides, re-opened 21 November 2026: the Northeast regional list, the Great Lakes regional list, the California regional list, and the Midwest monarch nectar plant guide. Bloom months were cross-checked against the Pollinator Partnership planting guides. The 3x3x3 rule, three species per season with three plants of each, is the rule in the Pollinator Partnership Canada home pollinator garden guidance. The Xerces Society's Bring Back the Pollinators principles, grow a variety of pollinator-friendly flowers, protect and provide bee nest sites and caterpillar host plants, avoid pesticides, and spread the word, are the framework the plan follows. The National Wildlife Federation Native Plant Finder lists host plants by ZIP code for gardeners who want to go beyond the two host plants in this plan.

      Xerces Society: Pollinator Plants, Northeast Region (PDF)

      Xerces Society: Pollinator Plants, Great Lakes Region (PDF)

      Xerces Society: Pollinator Plants, California (PDF)

      Xerces Society: Monarch Nectar Plants, Midwest (PDF)

      Pollinator Partnership planting guides

      National Wildlife Federation Native Plant Finder

      Frequently asked questions

      What is the 3x3x3 rule for a pollinator garden?

      The 3x3x3 rule is simple: plant three species of native plants that bloom in each of spring, summer, and fall, with three individual plants of each species, for a total of 27 plants. Three species per season means the season still blooms if one species fails, and three plants of each species forms a drift big enough for pollinators to find. This planner builds every plan on that rule and scales the drift sizes up as the planting area grows.

      Why does the bloom sequence matter more than the plant list?

      Pollinators need food whenever they are active, from early spring through fall. A garden with ten species that all bloom in July feeds pollinators in July and nobody in April or September. A queen bumble bee emerging in April and a monarch migrating in September both need flowers in their own month. The planner scores the sequence month by month from March through October, so a gap shows up as a named month instead of hiding inside a long plant list.

      What is a host plant, and why does this planner have a host-plant mode?

      A host plant is the plant a butterfly or moth caterpillar eats. Adult butterflies drink nectar from many flowers, but their caterpillars can often eat only one plant or one plant family: monarch caterpillars eat only milkweed, black swallowtail caterpillars eat golden alexanders and other carrot-family plants, and Karner blue caterpillars eat only wild lupine. Host-plant mode adds two regional host plants to the plan, three plants of each, so butterflies breed in your garden instead of only visiting it.

      How many plants do I need for a small pollinator bed?

      A 4 by 8 foot bed, 32 square feet, holds 9 plants under this plan: one of each of the nine species, three per season, for about 108 dollars at 12 dollars per plant. The bloom sequence is complete, but every drift is a single plant, and the plan warns you about that. A 100 square foot bed holds 21 plants for about 252 dollars, with drifts of 2 or 3 per species. A bed needs 120 square feet before every drift reaches 3 plants at 2 foot spacing.

      Why does my plan show a gap in March?

      In the Northeast, Midwest, Great Plains, and Mountain West, almost no native perennial blooms in March, because spring arrives late there. The Southeast, Southwest, and California plans have no March gap, because their spring species open in March. The cheapest fix for a March gap is a native tree or shrub that flowers early, such as a native willow, which blooms before most perennials. The plan names the gap month so you can close it deliberately instead of discovering it in spring.

      Can I build a pollinator garden in shade?

      You can, but expect a thinner plan. Very few native pollinator perennials bloom well in full shade. The shade-tolerant species in this planner are wild geranium and eastern columbine in the Northeast, blue mistflower in the Southeast fall, and western columbine in the Pacific Northwest. In full shade the planner fills most seasons with fallback picks and warns you about each one, and no host plant in any regional table suits full shade, so a shade garden in host mode gets no host plants.

      Should I plant tropical milkweed for monarchs?

      No. Plant the milkweed native to your region. Tropical milkweed, Asclepias curassavica, stays green through winter in warm regions, which lets a monarch parasite build up and disrupts migration timing. The milkweeds in this planner are regional natives that die back in winter, which is the behavior monarchs evolved with. If a nursery sells you a milkweed that is not on your region's list, check the scientific name before buying.

      How much does a pollinator garden cost?

      At 12 dollars per plant, a 4 by 8 foot bed costs about 108 dollars, a 100 square foot bed about 252 dollars, a 300 square foot bed with host plants about 936 dollars, and a 500 square foot bed with host plants about 1,512 dollars. The estimate covers plants only, not soil, mulch, or tools. Change the price per plant to your local nursery price and the estimate follows it. Planting in stages, buying smaller pots, and growing easy species from seed all cut the bill without cutting the sequence.