Skip to content

Proportion Calculator

What do you want to solve?
Where is the missing term?
x
x
x
x

Pick where x sits, then enter the three terms you know. The calculator cross-multiplies to find x, and shows the exact fraction when the answer is not a whole number.

If 4 gives 6, what does 10 give? Direct proportion: the ratio stays the same, so doubling the amount doubles the result. The answer comes with a small table of values at the same rate.

If 4 workers take 6 days, how long do 8 workers take? Inverse proportion: the product stays the same, so more workers means less time. The answer comes with the constant-product check.

Answer

Working, step by step

      This calculator gives exact proportion answers with the working shown, for homework and everyday arithmetic. Decimals are rounded to 6 places, and the fraction form is the exact answer when a decimal is rounded. It is an educational aid: if an answer looks surprising, check the steps against your textbook or teacher.
      Quick answer: In 2:3 = 4:x, x = 6. Cross-multiply: 2 times x equals 3 times 4, which is 12, then divide by 2. This calculator also solves direct and inverse proportion word problems, with exact fractions and every step shown.

      Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

      How to use the Proportion Calculator

      Pick a mode at the top of the calculator: Find the missing term, Direct proportion, or Inverse proportion. Then type your numbers into the boxes. The answer updates as you type, and the calculator shows every step of the working below the answer, so you can follow the method and check it against your textbook.

      Find the missing term solves a proportion, which is two ratios set equal with one term unknown. First pick where the missing term sits: the buttons show all four layouts, x:b = c:d, a:x = c:d, a:b = x:d, and a:b = c:x. Then type the three terms you know. For 2:3 = 4:x, the answer is x = 6. For x:3 = 4:6, the answer is x = 2. When the answer is not a whole number, the calculator shows the exact fraction as well as the rounded decimal: 3:7 = 5:x gives x = 35/3, which is 11.666667 rounded to 6 decimal places.

      Direct proportion answers "if a gives b, what does c give?" Type the first amount, what it gives, and the new amount. If 4 gives 6, then 10 gives 15. The answer comes with the unit rate, the amount each single unit gives, and a small table showing what c, double c, and triple c give at the same rate, so you can see the pattern at a glance.

      Inverse proportion answers "if a workers take b days, how long do c workers take?" Type the first count, the time it takes, and the new count. If 4 workers take 6 days, then 8 workers take 3 days. The answer comes with the constant-product check: 4 times 6 is 24, and 8 times 3 is 24, so the two sides agree.

      Decimals are welcome in every box. If you type 1.3, 2.4, and 2.9, the calculator works with the exact decimal values, not with rounded copies, and gives x = 348/65, which is 5.353846 rounded to 6 decimal places. Each amount must be nonzero and no larger than 10,000, with at most 6 decimal places. A zero term is rejected with a plain explanation, because every known term in a proportion must be nonzero: finding the missing term means dividing by one of them, and dividing by zero is undefined.

      Direct and inverse word problems need positive amounts, because they describe real quantities such as workers, hours, and prices. The missing-term mode accepts negative terms, since a proportion in algebra can have them, and the answer keeps the sign. If you need to simplify or scale the ratios behind a proportion first, our Ratio Calculator does that, and our Fraction Calculator handles the fractions in your answer.

      How it works

      What a proportion is

      A proportion says two ratios are equal. Maths is Fun puts it plainly: a proportion says two ratios, or fractions, are equal in value. The ratios 1-out-of-3 and 2-out-of-6 are the same, so they are in proportion. Written with colons, a proportion looks like a:b = c:d. Written as fractions, it looks like a/b = c/d. The two forms say the same thing, and the calculator shows both, so the step from one to the other is never a mystery.

      The four numbers in a proportion have names that are worth knowing. The first and fourth terms, a and d, are the extremes, and the second and third terms, b and c, are the means. That naming matters because of the rule that solves every proportion: in a true proportion, the product of the extremes equals the product of the means, so a times d equals b times c. That single fact is the whole engine of cross-multiplication, and it is the same fact whether x sits in the first, second, third, or fourth place.

      Proportions show up wherever two quantities keep the same relative size. A rope's length and weight are in proportion: Maths is Fun gives the example of 20 meters of rope weighing 1 kilogram, so 40 meters weighs 2 kilograms and 200 meters weighs 10 kilograms. Shapes in proportion keep their relative sizes too: in two drawings of the same dog, the ratio of head length to body length is the same in both, which is why making the head too long or too short would look wrong.

      Cross-multiplication, step by step

      Cross-multiplication is the standard method for finding a missing term, and Maths is Fun states it as a two-part rule: multiply across the known corners, then divide by the third number. Take the proportion 2:3 = 4:x. First write it as fractions: 2/3 = 4/x. Then cross-multiply: 2 times x equals 3 times 4. Multiply the known pair: 3 times 4 is 12, so 2 times x is 12. Divide both sides by 2: x is 12 divided by 2, which is 6. The full proportion is 2:3 = 4:6, and the check confirms it: 2:3 and 4:6 both simplify to 2:3.

      The method works the same way when x sits somewhere else; only the corners change. In x:3 = 4:6, the known corners are 3 and 4, and the third number is 6, so x is 3 times 4 divided by 6, which is 2. In 2:x = 4:6, the known corners are 2 and 6, and the third number is 4, so x is 2 times 6 divided by 4, which is 3. In 2:3 = x:6, the known corners are 2 and 6, and the third number is 3, so x is 2 times 6 divided by 3, which is 4. The calculator picks the right corners for the position you chose, and the steps name them every time.

      A classic worked example comes from Maths is Fun: how long should a dog's head be in a drawing? The small drawing has a head-to-body ratio of 10 to 20, and the big drawing has a body length of 42. The proportion is head/42 = 10/20, so the head is 42 times 10 divided by 20, which is 420 divided by 20, which is 21. The same method measures things you cannot reach. Sam wants the height of a tree, so he measures a stick and its shadow, 2.4 meters and 1.3 meters, and the tree's shadow, 2.9 meters. The proportion is height/2.9 = 2.4/1.3, so the height is 2.9 times 2.4 divided by 1.3, which is 6.96 divided by 1.3, which is 5.4 meters to the nearest 0.1. The calculator gives the unrounded answer, 348/65, which is 5.353846 to 6 decimal places.

      Exact fractions matter, because many proportions have answers that never end as decimals. The fraction 35/3 is 11.666667 rounded, but the 6s go on forever, so the decimal is always an approximation and the fraction is the exact answer. The calculator always shows both, and it says plainly when a decimal is rounded. That habit is worth copying in homework: give the fraction first, then the rounded decimal, and say how many places you rounded to.

      Direct proportion

      Direct proportion means that as one amount increases, the other increases at the same rate. Maths is Fun defines it exactly that way, and the pay example makes it concrete: if you are paid 20 dollars an hour, how much you earn is directly proportional to how many hours you work. Work 2 hours and you get paid 40 dollars; work 3 hours and you get paid 60 dollars. The ratio of pay to hours never changes: it is 20 to 1 every time.

      The number that ties the two amounts together is the constant of proportionality, usually written as k. In the pay example, the constant is 20, because earnings equal 20 times hours worked. Written as an equation, that is y = kx, where k is the constant. Maths is Fun works a clean example: y is directly proportional to x, and when x is 3, y is 15. Put those numbers into y = kx to get 15 = k times 3, divide both sides by 3, and k is 5, so y = 5x. Once k is known, any other question is easy: when x is 9, y is 5 times 9, which is 45; when y is 2, x is 2 divided by 5, which is 0.4.

      The calculator finds the constant for you and calls it the unit rate: b divided by a. If 4 gives 6, the unit rate is 6 divided by 4, which is 1.5, so each unit gives 1.5. Then the answer for any new amount is the unit rate times that amount: 10 times 1.5 is 15. The table in the answer shows the pattern in action, with the new amount, double it, and triple it, each paired with its result at the same rate. Doubling the input always doubles the output in direct proportion, and the table lets you watch that happen.

      Inverse proportion

      Inverse proportion is the mirror image: when one value decreases at the same rate that the other increases. Maths is Fun uses speed and travel time as the first example, because the faster you go, the shorter the time. As speed goes up, travel time goes down, and as speed goes down, travel time goes up. The relationship is still a proportion, but it is a proportion between one amount and the reciprocal of the other: y is inversely proportional to x is the same as saying y is directly proportional to 1/x, which can be written as y = k/x.

      The working example is a fence: 4 people can paint a fence in 3 hours, and the question is how long 6 people will take, assuming everyone works at the same rate. The constant is the product of people and hours: 4 times 3 is 12, so the rule is t = 12/n, where t is hours and n is people. With 6 people, t is 12 divided by 6, which is 2 hours. The same rule answers the reverse question: to finish in half an hour, n is 12 divided by 0.5, which is 24 people, assuming they do not all get in each other's way.

      The calculator checks its own answer for inverse proportion, and the check is the heart of the method. The product a times b is the constant, and the product c times y must equal it. If 4 workers take 6 days, the constant is 24 worker-days, and if 8 workers take 3 days, 8 times 3 is 24, so the check passes. When the answer is a rounded decimal, the check uses the rounded value and says so: with a constant of 45 and 7 workers, the exact answer is 45/7, which is 6.428571 rounded, and 7 times 6.428571 is 44.999997, which is 45 to within rounding. The exact fraction passes the check exactly, which is one more reason to keep the fraction in view.

      What your result means

      A proportion answer is only useful if you know what to do with it, so here is how the four most common uses play out. In each case the method is the same, and only the story around the numbers changes.

      Recipes are the friendliest use. A recipe that serves 4 needs 6 cups of flour, and you are cooking for 10: that is direct proportion, and the answer is 15 cups. The unit rate tells you the recipe needs 1.5 cups per serving, which is the number to remember if you cook the dish again for a different crowd. The table does the rest: for 20 servings you need 30 cups, and for 30 servings you need 45 cups. If the answer comes out as a fraction, such as 35/3 cups, the decimal 11.666667 tells you it is just under 11 and two-thirds cups, and the fraction tells you the exact amount. Our Unit Converter helps when the recipe mixes cups, grams, and ounces, because a proportion only works when the units match on each side.

      Map scales are proportions you can walk on. A map scale of 1:24,000 means 1 unit on the map stands for 24,000 of the same units on the ground. On a US Geological Survey 7.5-minute quadrangle map, 1 inch on the map is 24,000 inches, or 2,000 feet, on the ground, and 1 centimeter is 240 meters. If two towns are 3.5 inches apart on that map, the proportion is 1/24,000 = 3.5/x, so the real distance is 3.5 times 24,000 inches, which is 84,000 inches, or 7,000 feet, or about 1.33 miles. The same method works at other scales: Alaska quadrangle maps are 1:63,360, where 1 inch represents 1 mile, and the smaller-scale 1:100,000 and 1:250,000 maps run about 1.6 miles and about 4 miles per inch. Measure the map, set up the proportion, and the ground distance follows.

      Unit pricing is direct proportion with money on one side. If 4 pounds of coffee cost 6 dollars, the unit rate is 1.50 dollars per pound, and 10 pounds cost 15 dollars. Comparing two packs is comparing two unit rates: the cheaper unit rate wins, whatever the pack sizes. Proportions also solve percent problems, because a percent is a ratio: saying 25 percent is saying 25 per 100. Maths is Fun shows the setup as part/whole = percent/100. What is 25 percent of 160? The part is 160 times 25 divided by 100, which is 40. What is 12 dollars as a percent of 80 dollars? The percent is 12 times 100 divided by 80, which is 15 percent. And if a phone on sale for 150 dollars is only 80 percent of its normal price, the normal price is 150 times 100 divided by 80, which is 187.50 dollars. For percent work that starts from a percent rather than a proportion, our Percentage Calculator covers the same ground from the other direction.

      Work-rate problems are the classic inverse proportion. More workers means less time, more taps means a faster fill, and a faster speed means a shorter trip, all because the product stays fixed. If 6 painters take 10 days, the constant is 60 painter-days, so 4 painters take 15 days and 12 painters take 5 days. The constant is the size of the job in worker-days, and it is the number to keep in mind when the crew changes. One caution from the fence example applies to every work-rate answer: the math assumes everyone works at the same rate and nobody gets in anyone else's way. In real life, a crew of 24 may not finish in half an hour, because coordination itself takes time. The proportion gives the ideal answer, and experience adjusts it.

      Direct vs inverse: how to tell them apart

      The most common proportion mistake is picking the wrong kind, so here is the test to run before you type anything. Ask what happens to the second amount when the first amount goes up. If the second amount goes up by the same factor, the relationship is direct. If the second amount goes down, it is inverse. If neither happens in a fixed pattern, it is not a proportion at all, and no proportion method will save it.

      Question to askDirect proportionInverse proportion
      When the first amount doubles, the second...Doubles tooHalves
      What stays the same?The ratio, b divided by aThe product, a times b
      Equation formy = kxy = k divided by x
      Typical exampleHours worked and pay earnedWorkers on a job and days it takes
      Table patternBoth columns grow togetherOne column grows as the other shrinks
      Graph shapeA straight line through zeroA curve falling toward both axes

      Run the doubling test on a real question. If a recipe for 4 needs 6 cups of flour, doubling the servings to 8 doubles the flour to 12 cups: direct. If 4 workers take 6 days, doubling the crew to 8 halves the time to 3 days: inverse. The test works because doubling is easy to picture, and it catches the mix-ups that a formula alone misses. When in doubt, try the numbers both ways and ask which answer makes sense in the real world: 8 workers taking 12 days would mean extra workers slow the job down, which is plainly wrong, and that wrongness is the signal that the proportion is inverse, not direct.

      Some relationships look proportional but are not. The side length and the area of a square are not in direct proportion, because doubling the side quadruples the area. The distance a falling stone travels is proportional to the square of the time, not to the time itself: Maths is Fun gives a stone falling 19.6 meters after 2 seconds and 44.1 meters after 3 seconds, which follows d = 4.9 times t squared. Light brightness falls as the square of the distance too: a brightness of 1 at 1 meter is only 0.25 at 2 meters. This calculator handles straight direct and inverse proportion only, and it says so in its limits: squared and cubed relationships need their own tools.

      Common mistakes to avoid

      Mixing up direct and inverse proportion is the biggest mistake, and the doubling test above is the cure. The second biggest is setting up the proportion with mismatched order. In a:b = c:d, the first term of each ratio must describe the same kind of thing, and so must the second terms. If the left side is hours to dollars, the right side must be hours to dollars in the same order, not dollars to hours. Flip one side and the answer comes out upside down, often as a reciprocal of the right answer, which looks plausible until you check it.

      Forgetting that units must match is the third mistake. A proportion comparing 50 centimeters with 2 meters must convert first: 50 centimeters to 200 centimeters, or 0.5 meters to 2 meters, either way, but not 50 to 2 as written. The tree example works because every length is in meters. The map example works because the scale uses the same unit on both sides. Convert first, then set up the proportion, and the units cancel out of the comparison.

      Rounding too early is the fourth mistake. If you round 35/3 to 11.67 and then multiply it further, the small error grows with every step. Keep the fraction through the working and round only at the end, to the places the question asks for. The calculator follows that rule: every step works with exact integers or exact decimal parsing, and rounding happens only at the final display step.

      Treating a zero term as harmless is the fifth mistake. A proportion with a zero known term has no useful answer, because finding the missing term means dividing by one of the known terms, and a zero second term leaves its ratio with no value at all. The calculator refuses zero terms with a plain explanation rather than inventing an answer. If your problem genuinely has a zero in it, the question is not a proportion question: check the setup, because one of the numbers is probably wrong.

      Finally, do not trust an answer you have not checked. A quick check takes seconds: put the answer back into the proportion and see whether both sides simplify to the same ratio, or multiply out the constant product for an inverse problem. The calculator runs that check for you whenever the answer is exact, and the steps show it. In homework, writing the check out is worth doing even when it feels obvious, because it is the step that catches a flipped ratio or a slipped decimal before it costs marks.

      Frequently asked questions

      How do you solve a proportion?

      Cross-multiply. In 2:3 = 4:x, multiply the two known terms that sit diagonally from each other, 3 times 4, to get 12, then divide by the third known term, 2, to get x = 6. The full proportion is 2:3 = 4:6. The same rule works wherever x sits: multiply across the known corners, then divide by the third number.

      How do you find the missing term when x is in the first position?

      Use the same cross-multiplication rule with the corners for that position. In x:3 = 4:6, the known corners are 3 and 4, and the third number is 6, so x is 3 times 4 divided by 6, which is 2. The full proportion is 2:3 = 4:6, and both sides simplify to 2:3, which confirms the answer.

      What is the difference between direct and inverse proportion?

      In direct proportion, the ratio stays the same: as one amount increases, the other increases at the same rate, so doubling one doubles the other. Pay and hours worked are directly proportional. In inverse proportion, the product stays the same: as one amount increases, the other decreases, so doubling one halves the other. Workers on a job and the days it takes are inversely proportional: 4 people paint a fence in 3 hours, and 6 people take 2 hours.

      Can a proportion have decimals?

      Yes. Decimals work exactly like whole numbers in a proportion, and the answer is often a fraction. In 1.3:2.4 = 2.9:x, x is 2.4 times 2.9 divided by 1.3, which is 348/65, or 5.353846 rounded to 6 decimal places. That is the Maths is Fun tree example: a stick 2.4 meters tall with a 1.3 meter shadow, and a tree with a 2.9 meter shadow, gives a tree 5.4 meters tall to the nearest 0.1.

      How do you use proportions to solve percent problems?

      Write the percent as a ratio over 100, then cross-multiply. To find 25 percent of 160, set part/160 = 25/100, so the part is 160 times 25 divided by 100, which is 40. To find what percent 12 dollars is of 80 dollars, set 12/80 = percent/100, so the percent is 12 times 100 divided by 80, which is 15 percent.

      What does a map scale of 1:24,000 mean?

      It means 1 unit on the map stands for 24,000 of the same units on the ground. On a US Geological Survey 7.5-minute quadrangle map, 1 inch on the map is 24,000 inches, or 2,000 feet, on the ground, and 1 centimeter is 240 meters. If two towns are 3.5 inches apart on that map, they are 7,000 feet apart in reality.

      What is the constant of proportionality?

      It is the value that relates the two amounts in a direct proportion, usually written as k in the equation y = kx. If you are paid 20 dollars an hour, the constant is 20, because earnings equal 20 times hours worked. If y is directly proportional to x and y is 15 when x is 3, the constant is 15 divided by 3, which is 5, so y = 5x, and y is 45 when x is 9.

      Can a term in a proportion be zero?

      No. Every known term in a proportion must be nonzero. Finding the missing term means dividing by one of the known terms, and dividing by zero is undefined. A zero second term also leaves its ratio with no value at all, and a zero term anywhere else forces the missing term to be zero, which leaves a meaningless 0:0 on one side. This calculator rejects zero terms with a plain explanation instead of inventing an answer.

      Sources

      • Maths is Fun, Proportions — a proportion says two ratios are equal; 1-out-of-3 equals 2-out-of-6; rope 20 m weighs 1 kg, 40 m weighs 2 kg, 200 m weighs 10 kg; dog head (42 x 10) / 20 = 21; 25 percent of 160 is 40; $12 is 15 percent of $80; phone $150 at 80 percent means a normal price of $187.50; tree height (2.9 x 2.4) / 1.3 = 5.4 m to the nearest 0.1; concrete mix 1:2:6, 10:20:60, and 12 buckets of stones need 2 of cement and 4 of sand. Accessed 20 November 2026.
      • Maths is Fun, Directly Proportional and Inversely Proportional — direct proportion: as one amount increases, another increases at the same rate; pay $20 an hour, 2 hours earns $40, 3 hours earns $60; constant of proportionality 20, y = kx; y = 15 when x = 3 gives k = 5, y = 45 when x = 9, x = 0.4 when y = 2; inverse proportion: speed and travel time; 4 people paint a fence in 3 hours, 6 people take 2 hours, 24 people take half an hour; stone falls 19.6 m after 2 seconds and 44.1 m after 3 seconds; light brightness 1 at 1 meter is 0.25 at 2 meters. Accessed 20 November 2026.
      • Khan Academy, Proportional relationships — a 7th grade unit on proportional relationships: how they connect to ratios and rates, what their graphs look like, and what types of word problems proportions can solve, including constants of proportionality from graphs, equations, and tables. Accessed 20 November 2026.
      • US Geological Survey, Topographic Mapping booklet — 7.5-minute quadrangle maps at 1:24,000, 1 inch represents 2,000 feet; Alaska 1:63,360, 1 inch represents 1 mile; 1:100,000 about 1.6 miles per inch; 1:250,000 about 4 miles per inch. Accessed 20 November 2026.