Skateboard Size Finder
Recommended deck
How the size was worked out
Sizing the rest of the setup: our Bike Size Finder matches height to a bike frame, and our Kids Shoe Size Finder turns a child's foot length into a US kids shoe size.
Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.
How to use the Skateboard Size Finder
Deck width is the one sizing decision every skateboard buyer faces, and it is the decision most buyers get wrong by guessing. A deck that is too narrow feels twitchy underfoot and leaves no room to land tricks. A deck that is too wide feels heavy, and flip tricks take noticeably more effort. The right width depends on three things you already know: your shoe size, your height, and how you plan to ride. This finder combines all three, using published retailer size charts, and returns a deck width to start with, a deck length for your height, and the truck axle width that matches the deck.
The width figures come from skatedeluxe's published deck-width chart by shoe size, read on 20 November 2026. It is the finest-grained chart available from a skate retailer: one row per half shoe size from US 1 to US 14, with EU and UK equivalents on each row. Height is checked against Skate Warehouse's published height chart, and deck length comes from skatedeluxe's published height chart. Where the charts disagree, this page says which one governs and why. Nothing here is averaged across brands or invented: every number traces to a named published chart.
To get your result, follow these steps:
- Enter your US men's shoe size. Type the size you wear in skate shoes, from US 1 to US 14. Half sizes are welcome. If your size falls between half sizes, the tool rounds to the nearest half size at entry: 9.25 rounds up to 9.5, 9.24 rounds down to 9.0. If you wear women's sizes, convert to the US men's equivalent on the brand's own chart before entering it, because this tool's chart is written in US men's sizes.
- Enter your height. Type your height in inches or centimeters. Inches run from 36 in to 84 in; centimeters run from 90 cm to 215 cm. Height does two jobs here: it checks the width the shoe size suggests, and it sets the deck length. If the two charts point to different widths, the tool says so plainly and tells you which end of your band to try first.
- Pick your riding style. Street and technical skating takes the narrow end of your width band, where flip tricks take less effort. All-round and park skating takes the middle of the band. Transition, bowls and ramps take the wide end, where the extra surface area gives stability at speed. Cruising and commuting also take the wide end.
- Read the full result, not just the headline. The headline gives the deck width to start with. The cards show the width range for your shoe size, the deck length for your height, the truck axle width, the shoe size the chart row used, and whether your height agrees with your shoe size. The guidance explains the pick in plain language, the warnings flag a mismatch between height and shoe size, and the steps print the working so you can check the answer against the published charts yourself.
The tool updates as you type, so you can try a different style quickly and see how the pick moves inside your band. Try the example buttons under the form: a US 9 all-round rider at 5 ft 10 in, a US 7.5 street skater at 5 ft 6 in, a US 12 transition rider at 6 ft 2 in, and a US 2.5 young rider at 4 ft 2 in who is cruising. The last example shows two things at once: the chart has no US 2.5 row, so the tool sizes up to the nearest row, and a small rider gets the shorter-deck guidance.
One warning before you buy: deck sizing is a recommendation, not a rule. Tactics puts it plainly in its buying guide: there is no exact science about deck size, only personal preference. The charts agree on the shape of the answer, a bigger foot takes a wider deck, but two skaters with the same shoe size can happily ride decks a quarter inch apart. Use the pick as your starting point, stand on the deck before buying if you can, and try the next width up or down if the pick feels wrong underfoot.
How it works
The finder runs three lookups and one style pick. There is no averaging and no hidden formula: every figure comes from a published chart, and the steps printed under the result show each lookup so you can check them.
Step 1: the shoe-size lookup. Your shoe size, rounded to the nearest half size, is matched to the nearest row of skatedeluxe's chart. The chart has no US 2.5, US 12.5 or US 13.5 row, so those sizes snap to the nearest row, and on an exact tie the tool sizes up: US 2.5 takes the US 3 row, US 12.5 takes the US 13 row, US 13.5 takes the US 14 row. Each row gives a deck-width band, for example US 9 takes 8 in to 8.375 in.
Step 2: the style pick. Your riding style picks one width inside the band. Street takes the bottom of the band, all-round takes the middle rounded to the nearest standard eighth-inch width, transition and cruising take the top of the band. Because the pick always sits inside the published band, no pick invents a width the chart does not support. The one exception is US 14, where the chart is open-ended above 8.5 in: every style starts at the floor, 8.5 in, and for all-round, transition and cruising the guidance says to go wider to taste.
Step 3: the height check. Your height is matched to Skate Warehouse's height chart, which gives the width a height suggests: 5 ft 3 in and under takes 7.75 in or smaller, 5 ft 3 in to 5 ft 8 in takes 7.75 in to 8 in, 5 ft 8 in to 6 ft 0 in takes 8 in to 8.25 in, and over 6 ft 0 in takes 8.25 in and wider. If the height band overlaps the shoe-size band, the two charts agree. If it does not, the tool raises a warning and tells you which end of your shoe-size band to try first. Shoe size governs the pick either way, because skatedeluxe's chart starts with the feet.
Step 4: length and trucks. Your height is matched to skatedeluxe's length chart for a deck length, and the truck axle range is the pick width plus or minus 0.125 in, following skatedeluxe's rule that the axle should match the deck width within 0.125 in. An 8 in deck takes a 7.875 in to 8.125 in axle, which is skatedeluxe's own worked example.
Four worked examples, each recomputed exactly from the charts:
Example 1: US 9, 5 ft 10 in, all-round. The chart gives US 9 a band of 8 in to 8.375 in. All-round takes the middle: (8 + 8.375) / 2 = 8.1875 in, and the nearest standard eighth-inch width is 8.25 in, so the pick is 8.25 in. Height 70 in is 177.8 cm. Skate Warehouse puts a 5 ft 10 in rider on an 8 in to 8.25 in deck, which overlaps the shoe-size band, so height and shoe size agree. The length chart gives a 177.8 cm rider a 31.875 in to 32.25 in deck. Trucks: 8.25 in plus or minus 0.125 in gives 8.125 in to 8.375 in.
Example 2: US 7.5, 5 ft 6 in, street. The chart gives US 7.5 a band of 7.875 in to 8.25 in. Street takes the narrow end, so the pick is 7.875 in. Height 66 in is 167.6 cm. Skate Warehouse puts a 5 ft 6 in rider on a 7.75 in to 8 in deck, which overlaps the shoe-size band from 7.875 in to 8 in, so height and shoe size agree. The length chart gives a 167.6 cm rider a 31.75 in to 32.00 in deck. Trucks: 7.875 in plus or minus 0.125 in gives 7.75 in to 8 in.
Example 3: US 12.5, 6 ft 2 in, transition. The chart has no US 12.5 row. The nearest rows are US 12 and US 13, an exact tie, so the tool sizes up to US 13, which takes a band of 8.5 in to 8.625 in. Transition takes the wide end, so the pick is 8.625 in. Height 74 in is 188.0 cm. Skate Warehouse puts a 6 ft 2 in rider on an 8.25 in deck or wider, which overlaps the shoe-size band, so height and shoe size agree. The length chart gives a 188.0 cm rider a 31.875 in to 32.25 in deck. Trucks: 8.625 in plus or minus 0.125 in gives 8.5 in to 8.75 in.
Example 4: US 6, 6 ft 2 in, all-round. The chart gives US 6 a band of 7.75 in to 8 in. All-round takes the middle: (7.75 + 8) / 2 = 7.875 in, which is already a standard eighth-inch width, so the pick is 7.875 in. But height 74 in puts the rider on an 8.25 in deck or wider by Skate Warehouse's chart, and 8.25 in is above the top of the shoe-size band, so the two charts disagree. The tool raises a warning, keeps the shoe-size pick, and advises trying the wide end of the band, 8 in, first. The length chart gives a 188.0 cm rider a 31.875 in to 32.25 in deck. Trucks: 7.875 in plus or minus 0.125 in gives 7.75 in to 8 in.
The deck-width chart
The table below is skatedeluxe's published chart in full, as read on 20 November 2026, with the EU and UK equivalents from the same rows. The chart's own rule of thumb is that the bigger the shoe size, the wider the deck should be, and that the deck should not be wider than the feet or shoes are long. Read your shoe size across to find the band, then use the style pick to choose inside it.
| US men's shoe | EU | UK | Deck width |
|---|---|---|---|
| US 1 | 31.5 | 1 | Under 7 in to 7.25 in |
| US 1.5 | 32 | 1 | 7 in to 7.375 in |
| US 2 | 32.5 | 1.5 | 7.25 in to 7.5 in |
| US 3 | 34 | 2.5 | 7.375 in to 7.625 in |
| US 3.5 | 35 | 3 | 7.375 in to 7.75 in |
| US 4 | 36 | 3.5 | 7.5 in to 7.875 in |
| US 4.5 | 36.5 | 4 | 7.5 in to 7.875 in |
| US 5 | 37.5 | 4.5 | 7.625 in to 8 in |
| US 5.5 | 38 | 5 | 7.625 in to 8 in |
| US 6 | 38.5 | 5.5 | 7.75 in to 8 in |
| US 6.5 | 39 | 6 | 7.75 in to 8.125 in |
| US 7 | 40 | 6 | 7.875 in to 8.125 in |
| US 7.5 | 40.5 | 6.5 | 7.875 in to 8.25 in |
| US 8 | 41 | 7 | 8 in to 8.25 in |
| US 8.5 | 42 | 7.5 | 8 in to 8.25 in |
| US 9 | 42.5 | 8 | 8 in to 8.375 in |
| US 9.5 | 43 | 8.5 | 8 in to 8.375 in |
| US 10 | 44 | 9 | 8.125 in to 8.5 in |
| US 10.5 | 44.5 | 9.5 | 8.125 in to 8.5 in |
| US 11 | 45 | 10 | 8.25 in to 8.5 in |
| US 11.5 | 45.5 | 10.5 | 8.25 in to 8.625 in |
| US 12 | 46 | 11 | 8.375 in to 8.625 in |
| US 13 | 47.5 | 12 | 8.5 in to 8.625 in |
| US 14 | 48.5 | 13 | Wider than 8.5 in |
Three things about this chart are worth knowing. First, the bands overlap from row to row: US 8 and US 8.5 share the same band, 8 in to 8.25 in, and so do US 9 and US 9.5. That is the chart as published, not a rounding error, and it means neighboring half sizes often take the same deck. Second, the chart has gaps: there is no US 2.5, US 12.5 or US 13.5 row, which is why the tool snaps those sizes to the nearest row and sizes up on a tie. Third, the two end rows are open: US 1 is printed as under 7 in to 7.25 in, and US 14 as wider than 8.5 in. The tool starts the US 1 band at 7 in, the smallest standard deck width, and starts the US 14 pick at 8.5 in. Mini decks for the smallest riders run 6.5 in to 7 in, per Tactics, so a US 1 rider shopping for a first board for a small child should look at the mini range as well.
The chart is written in US men's sizes. There are no special skateboard decks for boys or girls, women or men: skatedeluxe says so directly, and deck width is a function of foot size and riding style, not of who is riding. What differs is the shoe-size scale, so a rider who wears women's sizes should convert to the US men's equivalent on the brand's own chart before entering a size.
How height checks the width
Shoe size drives the pick, but height is a useful second opinion, because a tall rider with small feet and a short rider with big feet both exist, and the two charts can disagree. The height check uses Skate Warehouse's published height chart, read on 20 November 2026:
| Height | Deck width the height suggests |
|---|---|
| 5 ft 3 in and under | 7.75 in or smaller |
| 5 ft 3 in to 5 ft 8 in | 7.75 in to 8 in |
| 5 ft 8 in to 6 ft 0 in | 8 in to 8.25 in |
| Over 6 ft 0 in | 8.25 in and wider |
Skate Warehouse prints its bands with shared boundaries: 5 ft 3 in appears in two bands, and so do 5 ft 8 in and 6 ft 0 in. This tool resolves each boundary to the shorter band, so exactly 5 ft 3 in takes the 7.75 in or smaller band, exactly 5 ft 8 in takes the 7.75 in to 8 in band, and exactly 6 ft 0 in takes the 8 in to 8.25 in band. Touching at one width counts as agreement: a height band that tops out at 7.75 in and a shoe band that starts at 7.75 in agree on 7.75 in.
When the two charts disagree, the tool does not split the difference. Shoe size governs, because skatedeluxe's chart starts with the feet and the feet are what stand on the deck. What changes is the advice: a tall rider with small feet is told to try the wide end of the shoe-size band first, and a short rider with big feet is told to try the narrow end. The warning also says to stand on the deck before buying if you can, because a mismatch between the charts is exactly the case where feel matters more than the table.
Most riders never see the warning. Shoe size and height track each other closely enough that the two bands overlap for the large majority of combinations. The warning exists for the genuine edge cases: a 6 ft 2 in rider in US 6 shoes, or a 5 ft 0 in rider in US 11 shoes. If you are one of those riders, the warning is doing its job, and the pick is still the honest starting point.
Deck length by height
Width matters most, but length matters too. Skate Warehouse puts standard deck lengths between 28 in and 32 in, and notes that the wider the deck, the longer it usually is. Skatedeluxe's length chart ties length to height, and it is the chart this tool uses:
| Height | Deck length |
|---|---|
| Under 140 cm | 28 in to 30.5 in |
| 140 cm to under 150 cm | 30.5 in to 31.5 in |
| 150 cm to 167.5 cm | 31.5 in to 31.875 in |
| Over 167.5 cm to 177.5 cm | 31.75 in to 32.00 in |
| Over 177.5 cm to 188.75 cm | 31.875 in to 32.25 in |
| Over 188.75 cm to 210 cm | 32 in to 32.5 in |
| Over 210 cm | Over 32.5 in |
Skatedeluxe prints this chart with overlapping bands: 150 to 175 cm, 160 to 185 cm, 170 to 195 cm and 180 to 210 cm all cover part of the same heights, and a separate row covers over 190 cm. Overlapping bands cannot be looked up directly, so this tool resolves the overlap by nearest band midpoint, and the resolution reproduces all three of skatedeluxe's own worked examples exactly: a 160 cm rider takes 31.5 in to 31.875 in, a 170 cm rider takes 31.75 in to 32.00 in, and a 180 cm rider takes 31.875 in to 32.25 in. Where the 180 to 210 cm band and the over-190 cm row both apply, the bounded band governs and the open row applies only above 210 cm. The table above shows the resolved bands the tool uses.
Length is less important than width, and skatedeluxe says so directly: the deck should not be much longer than your legs, and decks for children should be slightly shorter. In practice, once you have the width right, the length mostly takes care of itself, because wider decks are usually also slightly longer. Treat the length range as a check when comparing two decks of the same width, not as a second decision to agonize over. If you are choosing between a 31.75 in deck and a 32.25 in deck at the same width, take the one inside your length range.
Skate Warehouse's own length chart agrees in outline: 5 ft 5 in and under takes 28 in to 30 in, 5 ft 5 in to 6 ft takes 30 in to 32 in, and 6 ft and up takes 32 in and up. The two charts differ in granularity, not in direction, and skatedeluxe's finer bands govern here.
Riding style: narrow or wide
Style is the third input because it moves the pick inside the band, sometimes by a quarter inch, which is enough to feel. The direction is agreed by every retailer: narrow decks flip easier, wide decks are more stable.
Street and technical. Street skating is ledges, stairs, rails and flatground, where the work is flip tricks, manuals and precise foot placement. Skate Warehouse puts common street widths at 7.5 in to 8.25 in and calls 8.25 in the most popular street size. Tactics puts technical skaters on the narrower side, 7.75 in to 8.25 in. Narrower boards are slightly lighter and need less power to flip, which is why the tool takes the bottom of your band for street. The trade is less surface area to land on and less stability at high speed.
All-round and park. If you skate a bit of everything, or you are buying a first board and do not know yet what you will favor, the middle of the band is the safe start. Skatedeluxe calls 8.25 in decks good all-round decks, and they are popular for exactly that reason: wide enough to land on, narrow enough to flip. The tool rounds the band midpoint to the nearest standard eighth-inch width, so the pick is always a width shops actually sell.
Transition, bowls and ramps. Transition skating is ramps, bowls and quarterpipes, where speed and stability matter more than flip speed. Skate Warehouse puts common transition widths at 8.5 in to 10 in or more, with a longer wheelbase for stability. Tactics puts skaters of big bowls, handrails and large gaps on 8.25 in to 9.0 in boards. The tool takes the top of your band for transition, and for US 14 feet, where the band is open above 8.5 in, the guidance says to go wider for bowls and ramps.
Cruising and commuting. Cruising is covering ground: getting across town, riding to work, rolling over rough surfaces. Cruisers run longer and wider than standard decks, with larger, softer wheels for a smoother ride. The tool takes the top of your band for cruising, and the guidance notes that cruiser shapes often run wider than a street deck, so if the board feels small underfoot, try the next width up. If cruising is all you do, a dedicated cruiser or longboard may suit you better than a popsicle deck at the top of its band, and this tool does not size those: longboards are sized by riding style, not shoe size.
Concave, the curvature across the width of the deck, interacts with width. Skate Warehouse notes that steep concave gives maximum responsiveness for street skating and precise foot placement, while mellow concave suits cruising and transition. Skatedeluxe recommends medium concave for beginners and intermediate skaters. Width and concave are separate choices: pick the width first, then choose medium concave unless you know you want something else.
Features
One chart governs. The width table is a single published chart, skatedeluxe's, used in full with no rows added and none dropped. That keeps the answer consistent: the same shoe size always gives the same band, and the band is the one the retailer prints.
Style moves the pick inside the band. Four riding styles pick a width inside your published band, so the answer reflects how you ride without ever leaving the chart. Street takes the bottom, all-round takes the middle, transition and cruising take the top.
Height checks the width. A second published chart, Skate Warehouse's height chart, is compared against the shoe-size band on every result. Agreement is confirmed in words; disagreement raises a warning with specific advice about which end of the band to try first.
Length and trucks included. The result carries the deck length for your height and the truck axle range that matches the pick, so the whole setup is sized in one pass. The axle rule is skatedeluxe's: within 0.125 in of the deck width.
Missing sizes handled honestly. US 2.5, US 12.5 and US 13.5 have no row on the chart. The tool says so in the steps, names the two nearest rows, and sizes up on the tie, instead of silently rounding to a row that is not the nearest.
Small riders flagged. A rider with US 3 shoes or smaller, or under 140 cm tall, gets the small-rider guidance: skatedeluxe says decks for children should be slightly smaller by body and shoe size, so a shorter deck in the recommended length range is the better first board.
Full working printed. Every result shows its steps: the shoe size entered, the chart row used, the style pick with its arithmetic, the height check, the length lookup and the truck calculation. Any answer can be checked against the published charts in a minute.
Worked examples. The four examples under the form cover the four shapes the answer takes: a plain all-round fit, a street pick at the narrow end, a snapped size with a transition pick at the wide end, and a height mismatch that raises a warning.
Use cases
Buying a first skateboard. A first board is usually bought for a rider who has never stood on one, so the width has to be right without any feel to go on. Enter the shoe size and height, leave the style on all-round, and buy the pick. The middle of the band is the most forgiving place to start, and the length and truck figures mean the rest of the setup matches.
Buying for a child. Children's boards are where guessing goes wrong most often, because adults buy the size they would ride themselves. A child in US 3 shoes takes a 7.375 in to 7.625 in deck on the chart, and the tool adds the small-rider guidance about a shorter deck. Tactics puts kids of 8 and under, shoe size 3 and under, on 6.5 in to 7.0 in decks, and youth of 9 to 12, shoe size 4 to 6, on 7.0 in to 7.5 in decks, so a child at the bottom of the chart should also be shown the mini range. If you are sizing shoes for the same child, our Kids Shoe Size Finder turns a foot length into a US kids shoe size.
Moving from street to transition. A skater who learned on a street deck and is starting to ride bowls often wonders whether the board is the problem. Run the finder twice, once on street and once on transition, with the same shoe size and height: the pick moves from the bottom of the band to the top, which shows exactly how much wider a transition deck would be for the same feet.
Replacing a deck that never felt right. If the current deck feels twitchy, check whether it is narrower than the pick; if flip tricks feel heavy, check whether it is wider. The band gives the full range to consider, and the style pick gives the single width to try next.
Building a complete setup online. Online shops list decks by width, trucks by axle width and wheels separately. The pick plus the truck range is the shopping list: a deck at the pick width, trucks whose axle falls in the printed range, and a length inside the printed range. Grip tape is standard at 9 in by 33 in, which covers most decks; skatedeluxe recommends extra-wide grip tape only for decks wider or longer than standard.
Checking a shop recommendation. If a shop suggests a width, run the finder with your own numbers and compare. A suggestion inside your band is a judgment call about style; a suggestion outside your band is worth asking about. The steps give you the chart rows to quote.
Sizing a second board for a different style. Many skaters end up with two setups, a street deck and a wider board for ramps or cruising. The finder prices the difference in inches: same shoe size, different style, and the two picks show how far apart the boards should be.
Buying a gift. A skateboard is a common gift and a hard one to size without the rider present. The shoe size is usually known or can be checked from a pair of shoes, height is easy to ask, and the style can be guessed from what the rider talks about. All-round is the safe style choice for a gift, and the result prints the full band, so the giver can see the range the recipient might move within.
What the charts disagree about
Retailer charts disagree with each other, and one publisher disagrees with itself. This section records every conflict found while building this tool and which source governs, so the choices are auditable rather than hidden.
US 7: Skate Warehouse vs skatedeluxe. Skate Warehouse's shoe-size chart puts US 7 and smaller on 7.0 in to 7.75 in decks. Skatedeluxe puts US 7 on 7.875 in to 8.125 in. The two do not overlap at all. Skatedeluxe governs: it is a per-half-size chart, while Skate Warehouse's bands are coarse, four bands for the whole shoe range, and Skate Warehouse's own height chart puts an average-height adult on 7.75 in to 8 in, which sits closer to skatedeluxe's figure than to its own shoe chart's ceiling.
US 9: Tactics prose vs skatedeluxe. Tactics' buying guide says riders in men's 6.5 to 9 should start with 7.5 in to 8.0 in decks, and riders in 9.5 or larger should take 8.0 in to 8.5 in. Skatedeluxe gives US 9 a band of 8 in to 8.375 in, which starts where Tactics' band ends. Tactics' prose is a coarse starting range for a whole span of sizes; skatedeluxe governs per size.
Tactics vs Tactics. Tactics' deck category page puts teen and adult riders in shoes 7 to 9 on 7.5 in to 8.25 in decks, while its buying guide puts men's 6.5 to 9 on 7.5 in to 8.0 in. Same publisher, two different bands for the same sizes. Both are coarse summaries, and neither is per-size, so skatedeluxe governs and Tactics is used for its style guidance and its kids bands, where it is the clearest source.
Deck length: Skate Warehouse vs skatedeluxe. Skate Warehouse puts 5 ft 5 in to 6 ft riders on 30 in to 32 in decks; skatedeluxe puts a 170 cm rider, about 5 ft 7 in, on 31.75 in to 32.00 in. The two agree in outline and differ in granularity. Skatedeluxe governs for length because its bands are finer and it publishes worked examples that this tool reproduces exactly.
Skate Warehouse height bands share boundaries. The printed height bands share their boundary heights, so 5 ft 3 in belongs to two bands. This tool resolves each boundary to the shorter band, as recorded in the height section above. The resolution only matters for riders at exactly 63, 68 or 72 inches.
Skatedeluxe length bands overlap. The printed length bands overlap across 150 to 210 cm, and the over-190 cm row overlaps the 180 to 210 cm band. This tool resolves the overlap by nearest band midpoint, which reproduces all three of skatedeluxe's worked examples, and the bounded band governs to 210 cm, with the open row applying only above it.
The US 1 row is open at the bottom. Skatedeluxe prints the US 1 row as under 7 in to 7.25 in. The tool starts that band at 7 in, the smallest standard deck width, and the notes name the mini range, 6.5 in to 7 in per Tactics, for the smallest riders.
Style widths differ by source. Skate Warehouse puts transition at 8.5 in to 10 in or more and street at 7.5 in to 8.25 in; Tactics puts technical skating at 7.75 in to 8.25 in and big bowls and gaps at 8.25 in to 9.0 in. The sources agree on direction and differ on the exact edges. This tool does not adopt either style band as a number: style moves the pick inside the shoe-size band, and the style bands are quoted in the content as guidance, not built into the arithmetic.
Sources
Every figure on this page was read from the original publisher on 20 November 2026. The deck-width chart, the deck-length chart, the truck rule and the all-round 8.25 in guidance come from skatedeluxe's skateboard deck guide. The height width chart, the height length chart, the transition and street width ranges and the 8.25 in most-popular street size come from Skate Warehouse's Skateboard Deck Buying Guide. The kids and youth bands come from Tactics' skateboard decks page, and the starting ranges, the technical and bowl widths and the no-exact-science guidance come from Tactics' Skateboard Buying Guide and Size Chart. Deck sizing changes rarely: the charts are stable, and the next review is due 19 May 2027. If you are converting a height measured in feet and inches, our Unit Converter converts length both ways, and if you ride a bike as well as a board, our Bike Size Finder matches height to a bike frame.
Frequently asked questions
What size skateboard deck do I need for shoe size 9?
A US men's 9 takes an 8 in to 8.375 in deck on skatedeluxe's chart. For all-round skating, the pick is 8.25 in: the band midpoint is (8 + 8.375) / 2 = 8.1875 in, and the nearest standard eighth-inch width is 8.25 in. For street skating the pick is the narrow end, 8 in, and for transition or cruising it is the wide end, 8.375 in. A 5 ft 10 in rider at US 9 also takes a 31.875 in to 32.25 in deck length, and trucks with an 8.125 in to 8.375 in axle for the 8.25 in pick.
Does height matter more than shoe size for deck width?
No. Shoe size governs, because skatedeluxe's chart starts with the feet, and the feet are what stand on the deck. Height is a check: Skate Warehouse's height chart gives the width a height suggests, and this tool compares it with the shoe-size band on every result. Most riders find the two agree. When they disagree, the tool keeps the shoe-size pick, raises a warning, and advises trying the wide end of the band first if you are tall for your shoe size, or the narrow end first if you are short for it. Height also sets the deck length, which is its second job.
What width is best for street skating versus transition skating?
Street skating favors narrower decks and transition favors wider ones, and the retailers agree on the direction. Skate Warehouse puts common street widths at 7.5 in to 8.25 in and calls 8.25 in the most popular street size, while it puts transition at 8.5 in to 10 in or more. Tactics puts technical skaters at 7.75 in to 8.25 in and skaters of big bowls, handrails and large gaps at 8.25 in to 9.0 in. This tool applies the difference inside your shoe-size band: street takes the bottom of the band, transition takes the top, so a US 9 rider gets 8 in for street and 8.375 in for transition.
What if my shoe size is not on the chart, like US 2.5, 12.5 or 13.5?
Skatedeluxe's chart has no US 2.5, US 12.5 or US 13.5 row. This tool snaps those sizes to the nearest row, and on an exact tie it sizes up: US 2.5 takes the US 3 row, US 12.5 takes the US 13 row, and US 13.5 takes the US 14 row. The steps under the result say so and name both nearest rows, so the snap is never hidden. Quarter sizes are handled before that step: the tool rounds to the nearest half size at entry, so 9.25 becomes 9.5 and 9.24 becomes 9.0.
What deck length goes with my height?
Deck length follows height on skatedeluxe's chart: under 140 cm takes 28 in to 30.5 in, 140 cm to under 150 cm takes 30.5 in to 31.5 in, 150 cm to 167.5 cm takes 31.5 in to 31.875 in, over 167.5 cm to 177.5 cm takes 31.75 in to 32.00 in, over 177.5 cm to 188.75 cm takes 31.875 in to 32.25 in, and over 188.75 cm to 210 cm takes 32 in to 32.5 in. Skatedeluxe's own examples confirm the lookup: 160 cm takes 31.5 in to 31.875 in, 170 cm takes 31.75 in to 32.00 in, and 180 cm takes 31.875 in to 32.25 in. Length matters less than width, and wider decks are usually slightly longer, so treat the length range as a check when comparing two decks of the same width.
What truck size fits my deck?
Skatedeluxe recommends a truck axle that matches the deck width within 0.125 in: for an 8 in deck, an axle between 7.875 in and 8.125 in is ideal. This tool prints the axle range for your pick on every result, so an 8.25 in pick takes 8.125 in to 8.375 in axles. An axle much wider than the deck shifts the deck's center of gravity outward and hurts flip behavior, while a deck only slightly wider than the trucks is not a problem.
What size skateboard does a kid need?
Kids take smaller decks by body and shoe size: skatedeluxe says so directly, and Tactics gives the bands. Kids of 8 and under in shoe size 3 and under take 6.5 in to 7.0 in decks, and youth of 9 to 12 in shoe sizes 4 to 6 take 7.0 in to 7.5 in decks. On skatedeluxe's chart, a US 3 shoe takes 7.375 in to 7.625 in and a US 5 shoe takes 7.625 in to 8 in. This tool flags small riders, US 3 shoes or smaller or under 140 cm tall, and advises a shorter deck in the recommended length range as the better first board. A child under 140 cm tall takes a 28 in to 30.5 in deck length.
Is 8.25 in a good all-round deck width?
Yes. Skatedeluxe calls 8.25 in decks good all-round decks, and Skate Warehouse calls 8.25 in the most popular street size. It sits in the middle of the common range: most decks run 7.5 in to 9 in wide, and 8.25 in is wide enough to land on comfortably while still narrow enough to flip without extra effort. It is also the pick this tool gives for several common combinations, including a US 9 all-round rider and a US 9.5 all-round rider. If you are buying a first board and do not know your style yet, 8.25 in is the safest single width to start from, provided it falls inside your shoe-size band.