Time Card Calculator
| Day | Shift | Break | Hours |
|---|
Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.
How to use the Time Card Calculator
A time card calculator turns clock-in and clock-out times into the numbers that matter on payday: total hours worked, regular hours, overtime hours, and estimated gross pay. This calculator does the whole week in one place. Enter each day you worked, take off the unpaid break, and it adds up the week, splits the hours at the federal 40-hour overtime line, and multiplies by your hourly rate. It also has a single-shift mode for one day, which works the same way as a time clock: one clock-in, one clock-out, one answer. Everything runs in your browser, nothing is uploaded, and there is no signup.
- Pick a mode. Weekly time card is the default: seven day rows, Monday through Sunday, with overtime and gross pay for the week. Single shift is for one day only: a quick check of one clock-in and clock-out pair, with no overtime split, because one shift cannot pass 40 hours.
- Enter each day's clock-in and clock-out times. Use the time fields, which take hours and minutes. A sample week is already filled in: Monday to Friday, 9:00 in the morning to 5:00 in the afternoon. Edit any day to match your own card, and leave a day blank to skip it. Blank days are days off and add nothing to the week.
- Enter the unpaid break in minutes. A 30-minute lunch goes in as 30. If the break was paid, or there was no break, enter 0. The break is taken off the shift before the hours are counted, because an unpaid meal period is not hours worked. Short rest breaks of 20 minutes or less are different: under the Fair Labor Standards Act they count as hours worked, so do not deduct a 10-minute coffee break. The section on common mistakes below explains the difference.
- Enter your hourly rate, if you want a pay estimate. The rate is optional. With a rate, the calculator shows regular pay, overtime pay at 1.5 times the rate, and estimated gross pay. Without a rate, it shows hours only. The rate should be your regular hourly rate, which may be more than your base rate if you earn shift differentials or nondiscretionary bonuses. The how-it-works section explains why.
- Read the result. The big number is your total hours for the week in decimal hours, with the same total in hours and minutes beside it. Under it are the regular hours, the overtime hours, the overtime rate, and the pay figures. The result updates as you type, so you can change one day and watch the week change at once.
- Check the day-by-day table. Every day shows its shift, its break, and its hours, so you can spot a day that looks wrong before you trust the total. Overnight shifts are marked next day, because the clock-out falls after midnight.
- Check an overnight shift the same way. For a night shift, enter the clock-in and clock-out exactly as they appear on the card, for example 10:00 in the evening to 6:00 in the morning. A clock-out earlier than the clock-in is counted as past midnight, so the shift comes out as 8 hours, not a negative number.
This calculator is one of the free tools on Tools Elite. The overtime rule it uses comes from the US Department of Labor: covered, nonexempt employees must receive overtime pay for hours worked over 40 in a workweek at a rate not less than one and one-half times their regular rate of pay. That rule, the meal and rest break rules, and the California daily overtime rules described below all come from the official sources listed at the bottom of this page, each accessed 20 November 2026. The calculator gives estimates for general guidance, not legal advice and not a payroll figure: your employer may round clock times, your state may pay daily overtime, and your regular rate may include more than your base rate, so always check your pay stub and your state labor department before relying on a figure.
How it works
The math is simple, and every step is shown in the day-by-day table so you can check it with a pencil. The calculator works in minutes, because minutes are exact, and only converts to decimal hours at the end.
One day. Paid minutes equal the shift length minus the unpaid break. The shift length is clock-out minus clock-in. If the clock-out is earlier than the clock-in, 24 hours are added first, which is how an overnight shift is counted. If the two times are the same, the shift counts as 24 hours. A 9:00 to 5:00 shift is 480 minutes; take off a 30-minute unpaid lunch and the paid time is 450 minutes. Decimal hours equal paid minutes divided by 60, so 450 minutes is 7.50 hours. The calculator rounds decimal hours to two places, and the pay is worked out from the exact minutes, not from the rounded hours, so the money never loses a cent to rounding.
The week. Total hours are the paid minutes of every day added together, divided by 60. Regular hours are the first 40 hours of the week. Overtime hours are everything over 40. The overtime rate is 1.5 times the hourly rate. Regular pay is regular hours times the hourly rate. Overtime pay is overtime hours times the overtime rate. Gross pay is regular pay plus overtime pay. The 40-hour line is the federal rule in the Fair Labor Standards Act, published by the US Department of Labor in Fact Sheet 23: unless specifically exempted, employees covered by the Act must receive overtime pay for hours worked in excess of 40 in a workweek at a rate not less than time and one-half their regular rates of pay.
Worked example 1: a standard week. Maya works Monday to Friday, 9:00 in the morning to 5:00 in the afternoon, with a 30-minute unpaid lunch each day, at 20 dollars an hour. Each day is 480 minutes minus 30, which is 450 minutes, or 7.50 hours. Five days give 2,250 minutes, which is 37.50 hours. That is under 40, so there is no overtime. Gross pay is 37.50 times 20 dollars, which is 750 dollars. Her time card shows 37.50 hours, not 37 hours and 50 minutes: the 0.50 means half an hour, which is 30 minutes.
Worked example 2: an overtime week. Luis works Monday to Friday, 8:00 in the morning to 6:00 in the evening, with a 30-minute unpaid lunch each day, at 20 dollars an hour. Each day is 600 minutes minus 30, which is 570 minutes, or 9.50 hours. Five days give 2,850 minutes, which is 47.50 hours. The first 40 hours are regular time: 40 times 20 dollars is 800 dollars. The remaining 7.50 hours are overtime at 30 dollars an hour, which is 1.5 times 20: 7.50 times 30 dollars is 225 dollars. Gross pay is 800 plus 225, which is 1,025 dollars. If Luis had been paid straight time for all 47.50 hours, he would have received 950 dollars, so the overtime premium is worth 75 dollars that week.
Worked example 3: overnight shifts. Priya works three night shifts, 10:00 in the evening to 6:00 in the morning, with a 30-minute unpaid break, at 25 dollars an hour. The clock-out, 6:00 in the morning, is earlier than the clock-in, 10:00 in the evening, so 24 hours are added: the shift is 480 minutes, minus the 30-minute break, which is 450 minutes, or 7.50 hours. Three shifts give 1,350 minutes, which is 22.50 hours. That is under 40, so there is no overtime. Gross pay is 22.50 times 25 dollars, which is 562.50 dollars.
Each workweek stands alone. The Department of Labor is explicit that averaging of hours over two or more weeks is not permitted. A workweek is a fixed and regularly recurring period of 168 hours, seven consecutive 24-hour periods, and it need not coincide with the calendar week. If you work 50 hours one week and 30 the next, you are owed 10 hours of overtime for the first week, even though the two weeks average 40. An employer cannot move hours across the week boundary to erase overtime, and an agreement to count only 40 hours a week also fails the test: the overtime requirement may not be waived by agreement between the employer and employees.
The regular rate is more than the base rate. Overtime is paid at 1.5 times the regular rate of pay, and the regular rate includes all remuneration for employment except certain payments the Act itself excludes. Shift differentials and nondiscretionary bonuses count toward it; discretionary bonuses, gifts, expense reimbursements, and pay for time not worked, such as vacation or holidays, do not. The regular rate cannot be less than the minimum wage. The federal minimum wage is 7.25 dollars per hour, effective 24 July 2009, and where an employee is subject to both state and federal minimum wage laws, the employee is entitled to the higher rate. If your pay includes a shift differential or a production bonus, enter the regular rate that includes it, not the base rate alone, or the overtime pay will come out low. This calculator takes one rate for the whole week, so if you worked at two different rates in the same week, the federal rule uses the weighted average of the rates: total straight-time earnings divided by total hours worked.
Rounding. Decimal hours are rounded to two places, so 7 hours and 20 minutes shows as 7.33 hours. Pay is computed from exact minutes and rounded to the nearest cent, so a 7 hour 20 minute shift at 20 dollars an hour pays 146.67 dollars, not 146.60. Weekly totals are computed from the sum of the minutes, not by adding the rounded day figures, so the total can differ by 0.01 from the sum of the rounded days. That is rounding, not an error: the minutes are the true figure, and the decimals are a display of them.
What your result means
The result has four parts, and each one answers a different question about your week.
Total hours is the paid time for the week, in decimal hours, with the hours-and-minutes form beside it. It is the number to compare with the hours on your pay stub. If the pay stub shows fewer hours, the usual reasons are a break deducted that you did not enter, a day missing from the card, or rounding: some employers round clock times to the nearest few minutes under their own policy, which can shift a total by a few minutes either way. Ask payroll how your employer rounds clock times if the difference is small and steady.
Regular hours and overtime hours split the total at 40. Regular hours are the first 40, paid at the hourly rate. Overtime hours are the rest, paid at 1.5 times the rate. If the total is 40 or under, overtime is zero, and that is correct under the federal rule: the Act does not require overtime pay for work on Saturdays, Sundays, holidays, or regular days of rest as such. A Saturday shift is overtime only if it pushes the week over 40 hours. Some states and some employers pay more, which is covered in the next section.
Overtime rate is 1.5 times the hourly rate you entered. At 20 dollars an hour, the overtime rate is 30 dollars. At 18 dollars, it is 27 dollars. This is the rate for each overtime hour, and it is the figure to check against your pay stub's overtime line.
Estimated gross pay is regular pay plus overtime pay, before taxes and before any deductions. It is not your take-home pay: federal and state income tax, Social Security, Medicare, and any benefit deductions all come out of it. It is also an estimate, because it uses the single rate you entered. If your regular rate includes differentials or bonuses, or if your state pays daily overtime, the true figure is higher. Use the estimate to check that your paycheck is in the right range, not to the cent.
Days worked counts the days with times entered. It is a quick check that you entered the whole week: if you worked five days and the count says four, one day is missing or blank.
What to do if the numbers look wrong. Check the day-by-day table first. A day with the wrong hours usually means a clock-in or clock-out typed in the wrong order, a break entered in hours instead of minutes, or a missing day. A week with the right days but the wrong total usually means a break counted twice, or a paid break deducted that should not have been. Short rest breaks of 20 minutes or less must be counted as hours worked under the Fair Labor Standards Act, so they stay in the total. Only a bona fide meal period, typically 30 minutes or more, during which you are completely relieved from duty, is taken out. If you ate lunch at your desk and answered the phone, that was not a bona fide meal period, and the time counts as work.
Federal overtime vs California overtime
This calculator uses the federal weekly rule: overtime after 40 hours in a workweek, at 1.5 times the regular rate. That is the floor for the whole country. Some states build on top of it, and California builds the most. If you work in California, the federal figure this calculator gives you may be less than you are owed, because California also pays overtime by the day, and pays double time for very long days.
Under the federal rule, the day does not matter: only the week counts. A 12-hour shift is paid at straight time as long as the week stays under 40 hours. California counts the day as well as the week. The California Department of Industrial Relations, in the Labor Commissioner's overtime FAQ, states the general rule: a nonexempt employee 18 years of age or older shall not be employed more than eight hours in any workday or more than 40 hours in any workweek unless he or she receives one and one-half times the regular rate of pay for all hours worked over eight hours in any workday and over 40 hours in the workweek, or double time as specified. Eight hours of labor constitutes a day's work in California.
The California tiers are exact. Hours over 8 up to and including 12 in a workday are paid at one and one-half times the regular rate. Hours over 12 in a workday are paid at double the regular rate. The seventh consecutive day of work in a workweek has its own rule: the first eight hours on that day are paid at one and one-half times the regular rate, and hours over eight on that day are paid at double time. A 14-hour day in California therefore pays as 8 hours at straight time, 4 hours at time and one-half, and 2 hours at double time. The same 14-hour day under the federal rule alone pays as 14 hours at straight time, unless the week has already passed 40.
| Rule | Federal FLSA | California |
|---|---|---|
| Daily overtime trigger | None: the day is not counted | Over 8 hours in a workday |
| Hours over 8 up to 12 in a day | Straight time, unless the week is over 40 | 1.5 times the regular rate |
| Hours over 12 in a day | Straight time, unless the week is over 40 | 2 times the regular rate (double time) |
| Weekly overtime trigger | Over 40 hours in a workweek | Over 40 hours in a workweek |
| Seventh consecutive day | No special rule | 1.5 times for the first 8 hours, 2 times after 8 |
| Overtime basis | Hours worked in the workweek | Hours actually worked, by day and by week |
The practical difference is large. Take a worker who puts in four 10-hour days, Monday to Thursday, and then stops: 40 hours exactly. Under the federal rule there is no overtime at all, because the week never passes 40. In California, each 10-hour day carries 2 hours of daily overtime, so 8 hours of the week are paid at time and one-half. The same 40 hours are worth 40 hours of straight time under the federal rule and 32 hours of straight time plus 8 hours at time and one-half in California. At 20 dollars an hour, that is 800 dollars against 880 dollars: an 80-dollar difference from the same four days.
California also counts only hours actually worked toward overtime. The Labor Commissioner's FAQ gives the example of a worker who works five 8-hour days and is out ill one day: paid 48 hours for the week, but only 40 hours actually worked, so no overtime is owed. Paid sick time and paid holiday time do not count toward the overtime threshold, because no work was performed. The same principle runs through the federal rule, which counts hours worked.
Other states differ too, in their own ways. Some set a daily overtime threshold, some set their own weekly rules, and many set a higher minimum wage than the federal 7.25 dollars. This calculator does not try to encode every state, because state rules change and the details matter. If you work outside California, check your state labor department's published overtime rules before relying on the federal figure. If you work in California, treat the federal figure here as a floor and check the Labor Commissioner's overtime FAQ for the daily and double-time rules that apply to your shifts.
Exemptions exist in both systems. The federal overtime rule applies unless the employee is specifically exempted, and the California FAQ notes a number of exemptions and exceptions from the general overtime law, including special rules for agricultural workers. Executives, administrators, professionals, and some other groups can be exempt from overtime if they meet the legal tests, which turn on duties and salary, not on job title alone. If you are paid a salary and never see overtime, that may be correct, or it may be a misclassification: the tests are public, and your state labor department can explain them.
Minutes to decimal hours
Payroll runs on decimal hours, not on clock time. A time card shows 7 hours and 30 minutes; a pay stub shows 7.50 hours. The conversion is one division: decimal hours equal minutes divided by 60. Thirty minutes divided by 60 is 0.50, so 7 hours and 30 minutes is 7.50 hours. Fifteen minutes is 0.25 of an hour, and 45 minutes is 0.75. The minutes after the point are hundredths of an hour, not minutes: 7.50 hours is 7 hours and 30 minutes, and 7.30 hours is 7 hours and 18 minutes, not 7 hours and 30 minutes. Mixing the two up is the most common time card error there is.
| Minutes | Decimal hours | Minutes | Decimal hours |
|---|---|---|---|
| 0 | 0.00 | 30 | 0.50 |
| 5 | 0.08 | 35 | 0.58 |
| 10 | 0.17 | 40 | 0.67 |
| 15 | 0.25 | 45 | 0.75 |
| 20 | 0.33 | 50 | 0.83 |
| 25 | 0.42 | 55 | 0.92 |
The table rounds to two places, which is what this calculator shows. A few conversions come out exact: 15 minutes is exactly 0.25, 30 minutes is exactly 0.50, 45 minutes is exactly 0.75. The rest are rounded: 20 minutes is 0.3333 of an hour, shown as 0.33, and 40 minutes is 0.6667, shown as 0.67. That rounding is display only. The calculator keeps the exact minutes underneath and works the pay out from them, so a week of 7 hour 20 minute days pays on 440 minutes a day, not on 7.33 hours a day.
Three examples make the habit stick. A shift of 8 hours and 45 minutes is 8.75 hours, because 45 divided by 60 is 0.75. A shift of 7 hours and 20 minutes is 7.33 hours, because 20 divided by 60 is 0.3333, rounded to 0.33. A week of 37 hours and 30 minutes is 37.50 hours, because 30 divided by 60 is 0.50. If you ever need to go the other way, multiply the decimal part by 60: 0.75 times 60 is 45 minutes, and 0.33 times 60 is 19.8 minutes, which is the rounding showing, since the true figure was 20 minutes.
The confusion to avoid is reading 7.50 as 7 hours and 50 minutes. It is not: 50 minutes is 0.83 of an hour, so 7 hours and 50 minutes is 7.83 hours. The other confusion is adding decimal hours and clock minutes together, for example adding 7.50 and 30 minutes and getting 37.50. Convert first, then add: 30 minutes is 0.50 hours, so 7.50 plus 0.50 is 8.00 hours. This calculator does the conversion for you on every day and on the total, and shows both forms side by side so you can check each one against the other.
Common mistakes to avoid
Forgetting the unpaid break. A 30-minute lunch, five days a week, is 2.50 hours. Forget it and a 37.50-hour week reads as 40 hours, which can invent overtime that was never worked, or hide the fact that the week was short. Enter the break every day it was taken.
Deducting a paid break. Short rest breaks, usually 20 minutes or less, must be counted as hours worked under the Fair Labor Standards Act. A 10-minute coffee break and a 15-minute rest break stay in the total. Only a bona fide meal period, typically 30 minutes or more, with the worker completely relieved from duty, comes out. Deducting paid breaks understates the week and can erase overtime that is owed.
Counting paid time off toward overtime. Overtime is figured on hours worked. A paid sick day or a paid holiday adds to the paycheck but not to the 40-hour count. The California Labor Commissioner's FAQ gives the example: five 8-hour days worked plus a sick day paid at 8 hours is 48 hours paid but only 40 hours worked, so no overtime is owed. Do not enter sick days or holidays as worked days on the time card.
Reading decimal hours as clock time. A pay stub showing 37.50 hours means 37 hours and 30 minutes, not 37 hours and 50 minutes. A stub showing 7.83 hours means 7 hours and 50 minutes. If your own addition gives a different total than the stub, check this conversion first: it explains more mismatches than any other single cause.
Averaging two weeks together. Each workweek stands alone, and averaging over two or more weeks is not permitted under the Fair Labor Standards Act. A 50-hour week followed by a 30-hour week is 10 overtime hours in the first week, not an 80-hour fortnight at straight time. A biweekly paycheck still has to show the overtime from the heavy week.
Forgetting midnight on a night shift. A shift from 10:00 in the evening to 6:00 in the morning is 8 hours, not negative 16. Any calculator or spreadsheet that subtracts clock-out from clock-in without adding 24 hours will get a night shift wrong. This calculator adds the 24 hours automatically whenever the clock-out is earlier than the clock-in, and marks the shift as overnight in the table.
Entering the break in hours instead of minutes. The break field takes minutes: a 30-minute lunch is 30, not 0.5. Entering 0.5 as the break deducts half a minute, which barely changes the total and is easy to miss. If a day's hours look about half an hour too high, check the break first.
Using the base rate instead of the regular rate. Overtime is 1.5 times the regular rate, and the regular rate includes shift differentials and nondiscretionary bonuses. A worker on 20 dollars an hour with a 2-dollar night differential has a regular rate of 22 dollars for night hours, and an overtime rate of 33 dollars, not 30. Entering the base rate alone understates the overtime pay.
Ignoring state rules. The federal 40-hour rule is the floor, not the ceiling. California pays daily overtime after 8 hours and double time after 12, and other states have their own thresholds and minimum wages. A week with no federal overtime can still carry state overtime. Check your state labor department's published rules, and treat this calculator's figure as the federal minimum you are owed, not the whole answer.
Frequently asked questions
How do I calculate my hours from clock-in and clock-out times?
Subtract the clock-in time from the clock-out time, then take off the unpaid break. A 9:00 to 5:00 shift is 8 hours; take off a 30-minute unpaid lunch and the paid time is 7 hours and 30 minutes, which is 7.50 decimal hours. Add the days together for the week, and split the total at 40 hours: the first 40 are regular time, and the rest are overtime at 1.5 times the regular rate. This calculator does all of that from the times you enter, and shows the working day by day.
How is overtime calculated on a time card?
Under the federal Fair Labor Standards Act, hours worked over 40 in a workweek are overtime, paid at not less than one and one-half times the regular rate of pay. Add up the week's paid hours, take the first 40 as regular time, and multiply the rest by 1.5 times the hourly rate. A 47.50-hour week at 20 dollars an hour pays 40 hours at 20 dollars, which is 800 dollars, plus 7.50 hours at 30 dollars, which is 225 dollars, for a gross of 1,025 dollars. Each workweek stands alone: hours cannot be averaged over two or more weeks.
What is 7 hours 30 minutes in decimal hours?
7 hours 30 minutes is 7.50 decimal hours, because 30 minutes divided by 60 is 0.50. The same division converts any minutes figure: 15 minutes is 0.25, 45 minutes is 0.75, and 20 minutes is 0.33. The decimal part is hundredths of an hour, not minutes, so 7.50 hours is 7 hours and 30 minutes, while 7 hours and 50 minutes is 7.83 hours. This calculator shows both forms side by side so you can check each one against the other.
How do I handle an overnight shift on a time card?
Enter the clock-in and clock-out exactly as they appear on the card, and add 24 hours when the clock-out is earlier than the clock-in. A shift from 10:00 in the evening to 6:00 in the morning is 8 hours: 6:00 in the morning plus 24 hours is 30:00, minus 22:00 is 8 hours. Take off the unpaid break as usual, so with a 30-minute break the paid time is 7.50 hours. This calculator adds the 24 hours automatically and marks the shift as overnight in the day-by-day table.
Do unpaid breaks count toward overtime?
No. Overtime is figured on hours worked, and a bona fide meal period is not hours worked. Under the Fair Labor Standards Act, a bona fide meal period is typically 30 minutes or more, and the employee must be completely relieved from duty for the purpose of eating regular meals. Short rest breaks are different: rest periods of 20 minutes or less must be counted as hours worked, so a 10-minute coffee break stays in the total and counts toward the 40-hour threshold. If you worked through lunch, for example by answering the phone at your desk, that time was not a bona fide meal period and counts as work.
Does California pay overtime differently?
Yes. California pays overtime by the day as well as by the week. A nonexempt employee earns one and one-half times the regular rate for hours over 8 up to and including 12 in a workday, and for the first 8 hours on the seventh consecutive day of work in a workweek, and double the regular rate for hours over 12 in a workday and for hours over 8 on the seventh consecutive day. A 10-hour day therefore carries 2 overtime hours in California even if the week never reaches 40 hours, while the federal rule alone would pay it all at straight time. This calculator uses the federal weekly rule only, so California workers should treat its figure as a floor and check the Labor Commissioner's overtime FAQ.
Why does my paycheck show different hours than my time card?
The usual reasons are a break deducted that you did not expect, rounding of clock times under your employer's policy, paid time off counted in the pay but not in the hours worked, and a regular rate that includes shift differentials or bonuses. Check the day-by-day hours first, then check whether short rest breaks were deducted when they should have been paid, then ask payroll how clock times are rounded. If the difference is in the overtime line, check whether your state pays daily overtime: California, for example, pays overtime after 8 hours in a day, which a federal-only calculation will miss. If the difference stays unexplained, your state labor department can explain the rules that apply to your job.
Sources
- U.S. Department of Labor, Fact Sheet 23 — Overtime Pay Requirements of the FLSA: overtime pay for hours worked in excess of 40 in a workweek at a rate not less than time and one-half the regular rate; the workweek as a fixed and regularly recurring period of 168 hours; averaging of hours over two or more weeks is not permitted; no overtime required for work on Saturdays, Sundays, holidays, or regular days of rest as such; the regular rate includes all remuneration for employment except certain payments excluded by the Act, and cannot be less than the minimum wage; the overtime requirement may not be waived by agreement. Accessed 20 November 2026.
- U.S. Department of Labor, Fact Sheet 22 — Hours Worked Under the Fair Labor Standards Act: rest periods of short duration, usually 20 minutes or less, must be counted as hours worked; bona fide meal periods, typically 30 minutes or more, generally need not be compensated as work time, and the employee must be completely relieved from duty for the purpose of eating regular meals; work not requested but suffered or permitted to be performed is work time that must be paid for. Accessed 20 November 2026.
- California Department of Industrial Relations, Overtime FAQ — Labor Commissioner's Office: one and one-half times the regular rate for all hours worked in excess of eight hours up to and including 12 hours in any workday, and for the first eight hours worked on the seventh consecutive day of work in a workweek; double the regular rate for all hours worked in excess of 12 hours in any workday and for all hours worked in excess of eight on the seventh consecutive day of work in a workweek; overtime is calculated based on hours actually worked, so paid sick and holiday time does not count toward the threshold. Accessed 20 November 2026.
- U.S. Department of Labor, Minimum Wage FAQ — Questions and Answers About the Minimum Wage: the federal minimum wage for covered nonexempt employees is 7.25 dollars per hour effective 24 July 2009; where an employee is subject to both state and federal minimum wage laws, the employee is entitled to the higher minimum wage rate; a tipped employee may be paid not less than 2.13 dollars an hour in direct wages if that amount plus tips equals at least the federal minimum wage. Accessed 20 November 2026.