Skip to content

Curtain Size Finder: What Size Curtains Do I Need?

in

Outer edge of trim to outer edge of trim, not the glass.

in

Top of the frame down to the sill.

Rod mount

Standard mount puts the rod 5 inches above the frame. Ceiling mount puts it at the ceiling.

Desired curtain length

Sill length ends at the sill. Below sill ends 4 inches below it. Floor length ends half an inch above the floor. Puddle pools 3 inches on the floor.

in

Measure from the sill straight down to the floor. Needed for floor length and puddle.

Fullness

Fullness is total fabric width divided by rod width. 2x is the standard choice for most curtains.

Panel count

Each panel should be

This tool provides estimates for general guidance only. Curtain sizes vary by maker and heading style, so measure your own rod and window before ordering. Always check the manufacturer's specifications before buying.

Quick answer: For a standard window, hang the curtains from a rod mounted about 5 inches above the frame and 4.5 inches past each side, then buy panels that total twice the rod width and end about half an inch above the floor. A 48-inch window usually takes a 57-inch rod and about 114 inches of total panel width, so a pair of standard 50-inch panels is not quite enough at full fullness. Measure your own window first, because ceiling height and sill height change the length.

Last reviewed: 19 November 2026. Reviewed every 180 days; next review due 18 May 2027.

How to use the Curtain Size Finder

Curtains are sold by panel size, but the right panel size depends on your window, your rod position, and how full you want the folds. Guessing usually ends with panels that hang flat, stop short of the floor, or leave the sides of the window bare. This finder turns your window measurements into a recommended rod width, panel width, panel length, and the nearest standard panel size, using the measuring rules published by IKEA, curtain makers, and measuring guides. It takes about a minute.

  1. Measure your window width. Measure from the outer edge of the trim on one side to the outer edge of the trim on the other side, in inches. Measure the frame, not the glass. If the window is wider at the top than at the bottom, use the widest measurement.
  2. Measure your window height. Measure from the top of the window frame straight down to the sill, in inches. This is the frame height, not the distance to the floor.
  3. Pick your rod mount. A standard mount puts the rod 5 inches above the frame, the middle of the 4 to 6 inch range that measuring guides recommend. A ceiling mount puts the rod at the ceiling, which makes the window look taller; the finder will ask for the distance from the top of the frame to the ceiling.
  4. Pick your curtain length. Choose sill length, below sill, floor length, or puddle. Floor length and puddle need one more measurement: the distance from the sill straight down to the floor.
  5. Pick your fullness and panel count. Fullness is the total fabric width divided by the rod width. 2x is the standard choice. Then choose a pair of panels, which split the fabric across two panels, or a single panel, which carries all of it on one side.
  6. Read your result. You get the recommended rod width, each panel's width and length, the number of panels, how many standard 50-inch panels that means, and the nearest standard panel size, with a note whenever the nearest standard length is shorter than what you need.

This finder is one of the free tools on Tools Elite. Every result is an estimate built from published measuring rules, not a rule of its own. Measure twice before you order, and check the maker's stated panel size before you buy, because ready-made panels vary by brand.

How it works

Curtain sizing starts with the rod, not the window. Measuring guides agree that the rod should sit high and wide: 4 to 6 inches above the window frame, and 3 to 6 inches past the frame on each side. A rod hung high and wide makes the window look bigger, lets the open panels stack on the wall instead of blocking the glass, and gives the panels room to fold. The finder uses the middle of each range, 5 inches above the frame and 4.5 inches past each side, so the recommendation lands in the center of what the guides advise rather than at either extreme. IKEA's own buying guide puts wall-mounted rods about 6 inches above the window and adds at least 6 inches on each side, which sits at the generous end of the same ranges.

Width comes from fullness. A panel exactly as wide as the rod hangs flat like a sheet, so curtains need extra fabric to fold. Fullness is the ratio of total fabric width to rod width, and the standard range is 1.5x for a light, tailored look, 2x for most curtains, and 2.5x for a fuller, more formal look. IKEA tells buyers to multiply the rod width by 2, or by 2.5 for a fuller look, then divide by the panel width to find how many panels are needed. The finder follows the same formula: total fabric width equals rod width times fullness, and each panel's width is that total divided by the number of panels. A 57-inch rod at 2x fullness needs 114 inches of fabric, which is 57 inches per panel in a pair.

Length is measured from the rod down to where you want the hem to land. The distance from the rod to the sill is the window height plus the rod height above the frame. Sill length ends at the sill. Below sill length, also called apron length, ends 4 inches below the sill, covering the trim; the Ellis Curtain measuring guide and the Pillows and Pleats length guide both put apron length about 4 inches below the sill. Floor length ends half an inch above the floor, the float that measuring guides recommend so the hem hangs straight without dragging or collecting dust. A puddle adds 3 inches past the floor, the middle of the 2 to 4 inch range that length guides give for a relaxed puddle.

Worked example. Take a window 48 inches wide and 54 inches tall, with the sill 30 inches above the floor, a standard mount, floor length, 2x fullness, and a pair of panels. The rod width is 48 plus 4.5 inches on each side, which is 57 inches. The rod sits 5 inches above the frame, so the rod-to-sill distance is 54 plus 5, which is 59 inches. Floor length adds the 30 inches from sill to floor and subtracts the half-inch float, giving a panel length of 88.5 inches. Total fabric is 57 times 2, which is 114 inches, so each panel of the pair is 57 inches wide. The nearest standard length to 88.5 inches is 84 inches, which is shorter than needed, so the finder suggests the 95-inch panel hemmed to length. Standard panels are 50 inches wide, so 114 inches of fabric needs 3 standard panels, not 2.

What your result means

The panel size is the headline result: how wide and how long each panel should be, in inches. That is the size to look for when you shop, or the size to give a workroom for custom panels. If you chose a pair, each panel is half the total fabric width. If you chose a single panel, it carries the full fabric width on its own, which is why single panels get very wide on big windows.

The rod width tells you how long a rod to buy, finials not included. It is your window width plus 9 inches, 4.5 inches of extension on each side. Check that the rod you buy adjusts to that length, and that you have wall space for the brackets at that width. On wide windows, check the rod's weight rating and whether it needs a center support bracket, since a long rod carrying heavy panels can bow in the middle.

The nearest standard panel size matches your result to what stores actually sell. Ready-made panels come in standard lengths of 63, 84, 95, 108, and 120 inches, and standard panels are 50 inches wide. Some makers list 96 inches instead of 95, and some list 48 or 52 inches wide instead of 50, so check the label on the panel you buy. When the nearest standard length is shorter than your recommended length, the finder tells you to buy the next size up and hem it, because a panel that stops short of the floor looks like a mistake, while a hemmed panel looks made to measure.

The standard panels needed figure is the one most buyers miss. A pair of standard 50-inch panels gives only 100 inches of fabric. At 2x fullness, that covers a rod of just 50 inches. A 57-inch rod at 2x fullness needs 114 inches of fabric, which is 3 standard panels. The finder flags this whenever your chosen panel count falls short, so you can buy the extra panel before the curtains go up rather than discovering the gap afterward. If you are dressing a bedroom window, our mattress size finder can help you plan the room layout around the bed and the window together.

Ceiling mount changes the length but not the width. The rod still extends 4.5 inches past each side, but the rod height above the frame becomes the distance you measured from the frame to the ceiling, which can add a foot or more to the panel length. That is why ceiling-mounted curtains in rooms with 8-foot ceilings often need 95-inch or 108-inch panels, while the same window with a standard mount might take an 84-inch panel. If your recommended length passes 120 inches, the longest standard size, the finder says so and suggests custom panels or a lower rod position.

Curtain lengths and fullness explained

Length and fullness are the two choices that decide how curtains look once they are up. Length sets where the hem lands, and fullness sets how deep the folds are. The tables below lay out the options the finder offers, with the figures behind each one.

LengthWhere the hem landsBest forWatch for
Sill lengthAt the sillKitchens, bathrooms, windows above furnitureShortens the wall on tall windows
Below sill4 in below the sillWindows above radiators or low cabinetsCovers the trim, so check the fit
Floor length0.5 in above the floorLiving rooms, bedrooms, most windowsNeeds a level floor for an even hem
Puddle3 in on the floorFormal rooms, stationary panelsCollects dust, needs dressing
FullnessTotal fabricLookBest for
1.5x light1.5 times the rod widthGentle waves, mostly flat when closedHeavy or lined fabric, tight budgets
2x standard2 times the rod widthEven, generous foldsMost curtains and most rooms
2.5x full2.5 times the rod widthRich, soft gathersSheers, velvet, formal rooms

Floor length is the default for a reason: it suits almost every room, it makes the window look taller, and the half-inch float keeps the hem clean. Sill length belongs where a long panel would get in the way, above a radiator, a kitchen counter, a window seat, or a piece of furniture. Below sill length is the middle choice, long enough to cover the trim and look finished, short enough to clear what sits under the window. A puddle is a deliberate style, not an accident: the extra fabric pools in soft folds on the floor and looks formal, but it collects dust and has to be dressed again every time the panel moves, so keep it for panels that frame the window rather than cover it.

Fullness works the same way. Light 1.5x fullness suits heavy fabrics that already look substantial, because thick cloth does not need much extra width to show folds. Standard 2x fullness is the safe choice for cotton, linen blends, and most ready-made panels. Full 2.5x fullness suits sheers and lightweight fabrics, which need more width to look finished, and formal rooms where deep folds are part of the look. If you are redecorating the whole room, the rug size finder helps you size the rug to the same room, and our paint coverage calculator works out how much paint the walls need before the curtains go up.

Common mistakes to avoid

Measuring the glass instead of the frame. The rod width starts from the outer edges of the trim, not the glass. Measuring only the glass makes the rod too short, so the open panels cover part of the window and block light. Measure the full frame, and if the frame is wider at one point than another, use the widest measurement.

Mounting the rod on the frame. A rod fixed to the trim makes the window look small and the ceiling feel low. The guides put the rod 4 to 6 inches above the frame, or at the ceiling for the tallest look. The extra height costs nothing and changes the whole room.

Buying panels as wide as the window. A panel the same width as the rod hangs flat with no folds. Total fabric width should be about twice the rod width for a standard look. On a 57-inch rod, that is 114 inches of fabric, which a pair of standard 50-inch panels cannot supply on its own.

Forgetting the rod height in the length. Panel length is measured from the rod, not from the top of the window. A rod 5 inches above the frame adds 5 inches to every panel, and a ceiling mount can add a foot or more. Measure from where the rod will sit, and install the rod before you take the final length measurement.

Rounding down to a standard size. When the length you need falls between two standard sizes, buy the longer one and hem it. A panel that stops an inch or two above the floor looks short by mistake, while a hemmed panel looks made to measure. The same applies to width: round the panel count up, never down.

Ignoring rings and hooks. The finder measures the panel from the rod. Rings and clips hang the fabric 1 to 2 inches below the rod, which shortens the finished drop by that much. Grommets and rod pockets start at roughly the top of the rod. If you use rings, add that drop to the panel length or mount the rod slightly higher. If you are hanging curtains on a freshly papered wall, our wallpaper roll estimator works out how many rolls the room needs.

Frequently asked questions

What size curtains do I need for a 48-inch window?

For a 48-inch window with a standard mount, floor length, and 2x fullness, the rod should be 57 inches wide and each panel of a pair should be about 57 inches wide by 88.5 inches long, assuming a 54-inch window height and a sill 30 inches above the floor. The nearest standard length is 84 inches, which is shorter than needed, so buy 95-inch panels and hem them. You also need 3 standard 50-inch panels for full 2x fullness, since a pair gives only 100 inches of fabric.

How high should I hang a curtain rod above the window?

Hang the rod 4 to 6 inches above the window frame for a standard mount, or at the ceiling for the tallest look. The finder uses 5 inches, the middle of the 4 to 6 inch range. IKEA puts wall-mounted rods about 6 inches above the window. Mounting the rod higher makes the window look taller and the ceiling feel higher.

How much wider than the window should a curtain rod be?

The rod should extend 3 to 6 inches past the window frame on each side, so 6 to 12 inches wider than the window in total. The finder uses 4.5 inches per side, the middle of that range. The extra width lets the open panels stack on the wall instead of blocking the glass, which lets in more light and makes the window look wider.

What does 2x fullness mean for curtains?

2x fullness means the total flat width of your curtain panels is twice the width of the rod. On a 57-inch rod, 2x fullness needs 114 inches of fabric, which is 57 inches per panel in a pair. It is the standard choice for most curtains, giving even, generous folds. Light fullness is 1.5x and full fullness is 2.5x.

How long should floor-length curtains be?

Floor-length curtains should end about half an inch above the floor. Measure from the rod straight down to the floor and subtract half an inch. That float keeps the hem straight without dragging or collecting dust. A panel that kisses the floor exactly looks tailored but needs a level floor, and a panel that puddles needs 2 to 4 extra inches of fabric.

What are the standard curtain panel sizes?

Ready-made curtain panels come in standard lengths of 63, 84, 95, 108, and 120 inches, and standard panels are 50 inches wide. Some makers list 96 inches instead of 95, and some list 48 or 52 inches wide instead of 50, so always check the label. If your length falls between two standard sizes, buy the longer one and hem it.

How many curtain panels do I need?

Divide your total fabric width by the width of one panel and round up. Total fabric width is the rod width times your fullness, so a 57-inch rod at 2x fullness needs 114 inches of fabric, which is 3 standard 50-inch panels. A pair of standard panels gives only 100 inches, so wide windows and high fullness usually need more than two panels.

Sources

Every figure on this page comes from one of the sources below, accessed 19 November 2026. The rod and length rules come from the measuring guides listed here; the midpoint values the finder uses are stated openly in the text.

  • IKEA, "Window Treatments Buying Guide" (January 2025) — wall-mounted solutions usually about 6 inches above the window; add at least 6 inches on each side; sill, apron, floor, and pool lengths; ceiling or wall mount. ikea.com
  • IKEA, "Window Treatments Buying Guide" (January 2023) — multiply the rod width by 2, or by 2.5 for a fuller look; divide by the panel width to find the number of panels; add 6 inches above for the rod. ikea.com
  • Out of Decor, "How to Pick Curtain Length" — rod 4 to 6 inches above the frame; extend 3 to 6 inches past each side; subtract half an inch for a hover; add 2 to 4 inches for a puddle. outofdecor.com
  • CurtainPipe, "Correct Curtain Rod Placement: Height, Width, and Bracket Rules Explained" — rod 4 to 6 inches above the frame; 3 to 6 inches past each side; panels 2 to 2.5 times the window width. curtainpipe.com
  • Ellis Curtain, "Measurement Guide" — shorter panels hang 4 inches below the window sill; longer panels hang half an inch above the floor. assets.wfcdn.com
  • EngineerFix, "How to Measure for Curtains: Width and Drop" — sill length about 1 inch below the sill; apron length about 4 inches below the trim; floor length half an inch above the floor. engineerfix.com
  • Pillows and Pleats, "Curtain Length Guide: How Long Should Curtains Be?" — sill length about half an inch above the sill; apron length about 4 inches below the sill; standard lengths 63, 84, 95 or 96, 108, and 120 inches. pillowsandpleats.com
  • HowWhenWhat, "How to Choose Curtain Length and Width" — total panel width 2 to 2.5 times the rod width; a standard panel is commonly 50 inches wide; divide by the panel width to estimate the panel count. howwhenwhat.com
  • Home Decor Bliss, "What Are The Standard Curtain Panel Sizes?" — standard panel lengths 63, 84, 95, 108, and 120 inches. homedecorbliss.com
  • Storables, "What Sizes Do Curtains Come In" — a single panel typically measures around 50 inches in width; standard lengths 63, 84, 96, 108, and 120 inches. storables.com
  • The Home Hacks DIY, "Curtain Size Guide: Standard Dimensions and Chart" — panels 50 to 54 inches wide; lengths 63, 84, 95 or 96, 108, and 120 inches; total curtain width about 2 times the rod length. thehomehacksdiy.com
  • Home Project Calculator, "Curtain Size Calculator" — standard lengths 63, 84, 95 or 96, 108, and 120 inches; if the calculated length falls between standard sizes, round up and hem the panels. homeprojectcalculator.com