Skip to content

Inventory Turnover Calculator

From your income statement, for the same period as the inventory figures. Always at cost, never at retail: using sales here inflates the ratio by your markup. Enter 0 if you sold nothing in the period.

Beginning and ending inventory come from your opening and closing balance sheets. Average inventory is (beginning + ending) / 2.

Inventory value at the start of the period, at cost.

Inventory value at the end of the period, at cost.

Your average inventory for the period, at cost. If you have monthly balances, average all 12 month-end figures for a truer number than (beginning + ending) / 2.

365 for a full year, 90 for a quarter. Days of inventory on hand = period days / turnover, so the period sets the day count.

Compare your ratio against the typical band for your trade, from published retail guides. A quarterly period is annualized before it is compared.

What holding stock costs you each year as a share of its value: storage, insurance, handling, and the cost of the cash tied up. Leave blank to skip it.

The turns a year you want to reach, in the same period as the figures above. The tool shows the average inventory that pace needs and the cash it frees.

Your inventory turnover

How the numbers were worked out

      This tool estimates inventory turnover from the numbers you enter, for general guidance only. It is not financial or business advice. Benchmark bands are typical ranges from published retail guides, not guarantees for your business. Check important decisions with your accountant before acting on them.
      Inventory turnover is cost of goods sold divided by average inventory: $500,000 of COGS over $100,000 of average stock is 5 turns a year, or 73 days of inventory on hand. Grocery typically turns 12 to 20 times a year, apparel 4 to 6, and furniture 2 to 4. Enter your COGS and inventory above for your turnover, days of stock, weeks of supply, and your position against your category band.

      Last reviewed: 20 November 2026. Reviewed every 180 days; next review due 19 May 2027.

      How to use the Inventory Turnover Calculator

      Inventory turnover answers one question: how many times did you sell through your stock in the period, and how long did the average item sit before it sold? It is the ratio every small retailer is told to watch, because it turns a balance sheet number into a cash story. Stock that turns 5 times a year ties up half the cash of the same sales turning 2.5 times a year, and the difference is money you can spend on your next order, your rent, or your marketing instead of leaving it on a shelf.

      This calculator works out your turnover ratio, your days of inventory on hand, and your weeks of supply from the two numbers on your own books: cost of goods sold and average inventory. It then compares your ratio against the typical band for your retail category, shows what a target turnover would free in cash, prices the annual cost of carrying your stock, and works out what one more turn a year would release. Every step of the arithmetic is printed, so you can check each figure against your own books.

      The calculator is built for sellers: shop owners, marketplace sellers, and online retailers who hold stock and need to know how fast it moves. It sits in the seller cluster alongside our Marketplace Profit Comparison Calculator, which compares what you keep across marketplaces after fees, and our Seller Return Cost Calculator, which prices what returns really cost you. Turnover tells you how fast stock moves; those two tell you what each sale and each return is worth.

      To get your result, follow these steps:

      1. Enter your cost of goods sold (COGS). Take it from your income statement, for the same period as the inventory figures. COGS is what the goods you sold cost you to buy or make: purchase cost plus freight in, minus any vendor rebates. Always use cost, never sales. Inventory is recorded at cost on your balance sheet, so dividing sales by inventory inflates the ratio by your markup and makes you look faster than you are. Enter 0 if you sold nothing in the period: the calculator will say so plainly instead of inventing a ratio.
      2. Choose how to enter inventory. If you have your opening and closing balance sheets, pick beginning and ending inventory and enter both figures at cost. The calculator averages them. If you already know your average inventory, for example the average of 12 month-end balances, pick the average option and enter it directly. A 12-month average is the truer figure for a seasonal business, because a single busy or quiet month-end can skew the two-point average badly.
      3. Enter the period in days. The default is 365, a full year, which is the period the benchmark bands use. Enter 90 for a quarter, or any whole number from 1 to 3660. Days of inventory on hand is the period divided by turnover, so the period sets the day count. A quarterly result is also annualized before it is compared against the category bands, because a quarterly ratio and an annual band are not the same unit.
      4. Pick your retail category, if you want the benchmark. Grocery turns stock far faster than furniture, so a ratio that is excellent for one trade is a warning sign for another. Pick the category closest to your trade and the calculator shows the typical band and where your ratio sits against it. Leave it blank to skip the comparison. The bands come from published retail guides, listed in the sources section, and they are typical ranges, not pass or fail grades.
      5. Enter an annual carrying rate, if you want the holding cost. Holding stock costs money beyond the purchase price: warehouse or shelf space, insurance, handling, shrinkage, and the cost of the cash tied up. Enter that cost as a yearly percent of the inventory value and the calculator prices it. Leave it blank to skip it. There is no single right rate: it depends on your rent, your insurance, and what else the cash could earn.
      6. Enter a target turnover, if you want the cash target. The target is the turns you want to reach, in the same period as the figures above. The calculator shows the average inventory that pace needs, the cash it frees against your current stock, and the days on hand at that pace. Use it to set a buying goal: if you turn 3 times a year now and want 4, the target shows exactly how much less stock to hold.

      The tool updates as you type, so you can try different numbers quickly. Try the example buttons under the form. The specialty shop example is a store with $500,000 of COGS and stock running from $80,000 to $120,000: it turns 5 times a year and holds 73 days of stock. The grocery example turns 15 times a year, inside the grocery band of 12 to 20. The furniture example turns 3 times a year, inside the furniture band of 2 to 4, with a target of 4 turns that would free $50,000 of cash. The quarterly example is an online seller with $240,000 of COGS over 90 days: 6 turns in the quarter, 24.33 turns annualized, 15 days of stock.

      Read the full result, not just the headline. The headline leads with your turnover and your days of stock. The cards show the turnover, the annualized turnover when the period is not a year, the days of inventory, the weeks of supply, and the average inventory. When you enter a target or a carrying rate, extra cards show the target inventory, the cash freed, and the annual carrying cost. The benchmark box shows your category band and your position in it. The guidance explains the result in plain language, the warnings flag the cases that need a second look, the steps print the full working so you can check every figure, and the notes record the method and its limits.

      How it works

      The calculator runs five calculations in order: average inventory, turnover, days on hand, weeks of supply, and then the optional comparisons. Each one uses the result of the one before it, and the steps section on the page prints all of them so you can check them against your own arithmetic.

      Step 1: average inventory

      Average inventory is the typical stock you held during the period. The standard form, from your opening and closing balance sheets, is the two-point average:

      Average inventory = (beginning inventory + ending inventory) / 2

      A shop with $80,000 of stock at the start of the year and $120,000 at the end has an average inventory of ($80,000 + $120,000) / 2 = $100,000. Both figures must be at cost, the same basis as COGS, and both must come from the same period.

      The two-point average is a shortcut, and for a seasonal business it can mislead. A toy shop that builds stock for the holidays might hold $600,000 on October 31 and $150,000 on January 31. With annual COGS of $1,800,000, the October snapshot alone gives a turnover of 3, the January snapshot alone gives 12, and the two-point average of $375,000 gives 4.8. All three numbers describe the same shop in the same year. The truer figure comes from averaging all 12 month-end balances. Take a shop whose month-end balances run $90,000, $95,000, $100,000, $110,000, $120,000, $130,000, $125,000, $115,000, $105,000, $95,000, $85,000, and $80,000: the 12 balances sum to $1,250,000, so the monthly average is $104,166.67, while the two-point average of the first and last months is only $85,000. With COGS of $600,000, the monthly average gives a turnover of 5.76 and the two-point average gives 7.06. The gap is the seasonality the two endpoints miss. If you have monthly balances, use them: enter the average directly.

      Step 2: inventory turnover

      Turnover divides cost of goods sold by average inventory:

      Inventory turnover = COGS / average inventory

      The result is a multiple, read as turns in the period. A turnover of 5 means you sold through your entire average stock 5 times in the period. It is a ratio, not a rate: it counts how many times the stock cycled, not how fast each unit moved.

      Use COGS, not sales. The difference is your markup, and it is large. A shop with $800,000 of sales and a 40% gross margin has COGS of $480,000. With $100,000 of average inventory, the COGS-based turnover is $480,000 / $100,000 = 4.8, while the sales-based figure is $800,000 / $100,000 = 8. The sales version flatters you by two thirds and cannot be compared against any published benchmark, because every published band is COGS-based. Some tools calculate the ratio from sales for convenience. That is fine for tracking your own trend, but never compare a sales-based ratio against a COGS-based benchmark.

      Step 3: days of inventory on hand

      Days of inventory on hand converts the ratio into the average time a unit of stock sits before it sells:

      Days of inventory on hand = period days / turnover

      The default period is 365 days, a full year, so days = 365 / turnover. A turnover of 5 gives 365 / 5 = 73 days. A turnover of 4 gives 365 / 4 = 91.3 days. For a quarterly calculation the period is 90 days, so a turnover of 6 in the quarter gives 90 / 6 = 15 days. The day count always uses the period you entered, and the tool states the basis on every result. You will also see this measure called days sales of inventory (DSI) and days inventory outstanding (DIO). They are the same conversion.

      Days are often the more useful framing for planning. Seventy-three days of stock maps directly onto supplier lead times and cash flow forecasts in a way that 5 turns does not. If your supplier needs 60 days from purchase order to delivery and you hold 73 days of stock, you know exactly how much buffer you are working with, and how much cash is committed at any moment.

      Step 4: weeks of supply

      Weeks of supply is the same stock measured in weeks:

      Weeks of supply = days of inventory on hand / 7

      Seventy-three days of stock is 73 / 7 = 10.4 weeks of supply. Fifteen days is 15 / 7 = 2.1 weeks. Buyers often plan in weeks, so the figure slots straight into a reorder calendar.

      Step 5: annualizing a short period

      When the period is not a full year, the calculator annualizes the turnover before comparing it against the category bands, because the bands are annual:

      Annualized turnover = turnover x 365 / period days

      Six turns in a 90-day quarter annualizes to 6 x 365 / 90 = 24.33 turns a year. The comparison uses the annualized figure, and the steps print the annualization so you can see it. The headline and the days figure stay in the period you entered: 6 turns in the quarter, 15 days of stock. Only the band comparison is annualized.

      Turns to days at a glance

      The table below converts common turnover ratios to days of stock on a 365-day year. It is the same division the calculator runs, rounded to one decimal place.

      Turnover (times a year)Days of inventory on handWhat it looks like
      1365 daysStock sits a full year on average
      2182.5 daysStock turns twice a year
      3121.7 daysAbout 4 months of stock
      491.3 daysAbout a quarter of stock
      573 daysAbout 10 weeks of stock
      660.8 daysAbout 2 months of stock
      845.6 daysAbout 6 and a half weeks of stock
      1036.5 daysAbout 5 weeks of stock
      1230.4 daysAbout a month of stock
      1524.3 daysUnder a month of stock
      2018.3 daysUnder 3 weeks of stock

      Worked example 1: the specialty shop

      A specialty shop reports $500,000 of annual COGS, $80,000 of inventory at the start of the year, and $120,000 at the end.

      • Average inventory: ($80,000.00 + $120,000.00) / 2 = $100,000.00
      • Turnover: $500,000.00 / $100,000.00 = 5 times a year
      • Days of inventory on hand: 365 days / 5 = 73 days
      • Weeks of supply: 73 days / 7 = 10.4 weeks
      • One more turn a year: $500,000.00 / (5 + 1) = $83,333.33 of average inventory, freeing $16,666.67 of cash

      Worked example 2: the apparel brand

      An apparel brand reports $1,200,000 of annual COGS, $280,000 of inventory at the start of the year, and $320,000 at the end, and picks the apparel category.

      • Average inventory: ($280,000.00 + $320,000.00) / 2 = $300,000.00
      • Turnover: $1,200,000.00 / $300,000.00 = 4 times a year
      • Days of inventory on hand: 365 days / 4 = 91.3 days
      • Weeks of supply: 91.3 days / 7 = 13 weeks
      • Benchmark: typical for apparel and fashion is 4 to 6 turns a year. The ratio of 4 sits inside that range, at its lower edge.
      • One more turn a year: $1,200,000.00 / (4 + 1) = $240,000.00 of average inventory, freeing $60,000.00 of cash

      Worked example 3: the quarterly seller

      An online seller reports $240,000 of COGS for one quarter, $50,000 of inventory at the start of the quarter, and $30,000 at the end, with a 90-day period.

      • Average inventory: ($50,000.00 + $30,000.00) / 2 = $40,000.00
      • Turnover: $240,000.00 / $40,000.00 = 6 times in the 90-day period
      • Annualized: 6 x 365 / 90 = 24.33 turns a year
      • Days of inventory on hand: 90 days / 6 = 15 days
      • Weeks of supply: 15 days / 7 = 2.1 weeks
      • One more turn in the 90-day period: $240,000.00 / (6 + 1) = $34,285.71 of average inventory, freeing $5,714.29 of cash

      Worked example 4: the furniture store with a target

      A furniture store reports $600,000 of annual COGS, $180,000 of inventory at the start of the year, and $220,000 at the end, picks the furniture category, enters a target turnover of 4, and enters a 25% annual carrying rate.

      • Average inventory: ($180,000.00 + $220,000.00) / 2 = $200,000.00
      • Turnover: $600,000.00 / $200,000.00 = 3 times a year
      • Days of inventory on hand: 365 days / 3 = 121.7 days
      • Weeks of supply: 121.7 days / 7 = 17.4 weeks
      • Benchmark: typical for furniture and home goods is 2 to 4 turns a year. The ratio of 3 sits inside that range.
      • At 4 turns a year: $600,000.00 / 4 = $150,000.00 of average inventory. That frees $50,000.00 against the current $200,000.00.
      • Days on hand at that pace: 365 days / 4 = 91.3 days
      • Carrying cost: $200,000.00 x 25% = $50,000.00 a year
      • One more turn a year: $600,000.00 / (3 + 1) = $150,000.00 of average inventory, freeing $50,000.00 of cash

      What is a good inventory turnover ratio?

      There is no single good number. A grocer turning stock 12 times a year is healthy. A furniture retailer at 12 would be running on empty. The right comparison is your own category, and then your own trend: a ratio improving quarter over quarter matters more than any published band.

      For most consumer brands, a good inventory turnover ratio falls between 4 and 6, selling through full stock every 2 to 3 months, according to Wayflyer. Below 2 usually signals a problem: too much capital tied up, rising storage costs, and growing risk of dead stock. Above 6 is excellent if you are not stocking out. That 4 to 6 range is a starting point for a general consumer brand, not a target for every trade: the table below gives the band for each retail category.

      Benchmark bands by retail category

      Each band below is the typical annual turnover for that trade, from published retail guides verified on 20 November 2026. Where two or more guides agree on a range, the band is that agreed range. Where only one guide covers a category, the band is that guide's published range, and the source column says so. The calculator compares your ratio against the band for the category you pick, testing the unrounded ratio against the band edges.

      CategoryTypical turns a yearTypical days of stockSources
      Grocery and food retail12 to 2018.3 to 30.4 daysWayflyer, Smartsheet
      Pharmacy10 to 1524.3 to 36.5 daysSmartsheet
      Consumer packaged goods8 to 1230.4 to 45.6 daysSmartsheet
      Consumer electronics6 to 1036.5 to 60.8 daysWayflyer, RetailOps Toolkit
      Pet supplies6 to 940.6 to 60.8 daysRetailOps Toolkit
      Home improvement and hardware4 to 660.8 to 91.3 daysRetailOps Toolkit, Smartsheet
      Apparel and fashion4 to 660.8 to 91.3 daysWayflyer, RetailOps Toolkit
      Sporting goods4 to 573 to 91.3 daysOverlap of Wayflyer and RetailOps Toolkit
      Bookstores2 to 573 to 182.5 daysSmartsheet
      Furniture and home goods2 to 491.3 to 182.5 daysSmartsheet, Wayflyer, RetailOps Toolkit
      Auto dealerships1.5 to 3121.7 to 243.3 daysSmartsheet
      Luxury and jewelry1 to 3121.7 to 365 daysSmartsheet, RetailOps Toolkit

      The days column is the same band converted with days = 365 / turnover: 12 turns is 30.4 days and 20 turns is 18.3 days, so the grocery band is 18.3 to 30.4 days of stock. Read the band as a range, not a line: a ratio at the low edge is not failing, and a ratio above the high edge is not automatically a problem. It may mean you run lean and restock often, or it may mean you are losing sales to empty shelves. The band tells you where to look, not what to conclude.

      Three categories were left out of the calculator on purpose, because the published guides do not agree well enough to print a band. Restaurants are the sharpest case: Smartsheet gives 8 to 15 turns a year, while the listed-company data below works out to 31.2, because restaurant inventory on a public company's books is mostly food with a very short life, while the guide figure covers a small restaurant's whole stock. The two numbers measure different things, so no band is printed. Health and beauty is the same story in miniature: Wayflyer gives 4 to 8, RetailOps Toolkit gives 6 to 10, and Smartsheet's own text suggests 8 to 10, so no band survives all three guides: each two-guide overlap is contradicted by the third. Fast fashion is left folded into apparel for the same reason: published fast-fashion bands range from 6 to 15 with no agreement. A band you cannot source honestly is worse than no band at all.

      A second lens: listed-company averages

      The bands above come from retail guides written for small and mid-size sellers. A second lens comes from the accounts of listed US companies, compiled by Aswath Damodaran at NYU Stern. Damodaran publishes inventory as a share of sales and COGS as a share of sales by industry, as of January 2026. Dividing one by the other gives the average turnover for each industry, because turnover is COGS over inventory and the sales cancel out:

      Industry turnover = (COGS / Sales) / (Inventory / Sales)

      The table below shows that calculation for the retail and food industries, with the days figure from days = 365 / turnover. These are averages across listed companies, which are far larger than a small shop, so treat them as a second opinion rather than a target. A small grocer should not chase the listed grocery average any more than a small furniture shop should chase the listed furniture average. The value is in the shape: grocery and food wholesale turn fastest, furniture and apparel slowest, and restaurants fastest of all because their inventory is almost entirely perishable food.

      Industry (Damodaran sector)FirmsInventory / SalesCOGS / SalesTurnoverDays
      Restaurant and Dining642.17%67.76%31.211.7 days
      Retail (Grocery and Food)155.49%73.69%13.427.2 days
      Food Wholesalers136.62%84.56%12.828.6 days
      Retail (General)238.67%66.82%7.747.4 days
      Food Processing7813.41%76.77%5.763.8 days
      Retail (Automotive)3416.62%78.04%4.777.7 days
      Electronics (Consumer and Office)813.63%61.23%4.581.3 days
      Household Products11011.55%48.96%4.286.1 days
      Retail (Distributors)6216.67%69.43%4.287.6 days
      Electronics (General)11418.09%73.24%4.090.2 days
      Retail (Building Supply)1416.81%65.78%3.993.3 days
      Furniture and Home Furnishings2718.29%69.72%3.895.8 days
      Retail (Special Lines)9418.76%64.70%3.4105.8 days
      Apparel3519.25%43.12%2.2162.9 days

      Source: NYU Stern (Damodaran), Working Capital Ratios by Sector and Operating and Net Margins, data as of January 2026, read 20 November 2026. Turnover and days are calculated from the published ratios as shown above. Turnover is shown to one decimal place; days are worked out from the unrounded turnover, so dividing 365 by the turnover shown will not always reproduce the days figure exactly. Note that the Apparel sector includes manufacturers, whose inventory covers raw materials and work in progress as well as finished goods, which is why its average sits below the retail apparel band. The same applies to the electronics and household products sectors, which mix makers and sellers.

      For a sense of scale at the top of the market, Walmart turned its inventory 9.1 times in its most recent fiscal year, ended January 31, 2026, equivalent to about 40.1 days of inventory on hand. That speed reflects a grocery-heavy product mix and a world-class supply chain. It is useful as an illustration of the metric, not as a realistic benchmark for a growing consumer brand, as Wayflyer puts it.

      How to read your position

      Below your band. Stock is sitting longer than the trade norm. The cash tied up in it is cash you cannot spend elsewhere, and slow stock risks markdowns, damage, and write-offs. The usual fixes are buying smaller and more often, clearing slow lines decisively with bundles or outlet channels, and cutting the long tail of SKUs that barely sell. But check the context first: a deliberate pre-peak build, a new sales channel, or a planned range expansion all depress the ratio for good reasons, and the right test is whether the stock you built actually sells through in the season that follows.

      Inside your band. Your pace matches the trade norm. The useful work now is the trend: is the ratio rising or falling quarter over quarter, and is any single SKU hiding inside the healthy average? A blended ratio of 4.5 can conceal a bestseller turning 12 times a year while a third of the SKUs have not sold a unit in 6 months. Run the same calculation per SKU or per category before making buying decisions.

      Above your band. Fast turns free cash, and that is genuinely good. But an extremely high ratio often signals under-stocking: you are losing sales and disappointing customers because products keep running out. Smartsheet notes that a ratio above 12 or 15 in most industries may mean restocking too frequently, risking stockouts, or missing sales due to empty shelves, especially when lead times are long or the supply chain is unstable. Check your stockout rate and your lost-sales log before celebrating a very high number.

      The cash in your stock

      Turnover is a cash measure wearing a ratio's clothes. The same sales need less stock when they turn faster, and the difference is cash in your account. A brand with $600,000 of COGS needs $200,000 of average inventory at 3 turns a year ($600,000 / 3) and $100,000 at 6 turns ($600,000 / 6). Same sales, $100,000 of cash freed. That is the whole point of watching the ratio: it prices the working capital your shelves are holding.

      The calculator shows that price three ways. The target turnover field turns a goal into a stock level: enter the turns you want and it shows the average inventory that pace needs and the cash it frees against what you hold now. The carrying rate field prices the yearly cost of holding what you hold: storage, insurance, handling, shrinkage, and the cost of the cash itself. And the one-more-turn figure shows what a single extra turn a year would release, which is often the most persuasive number in the room when you are arguing for smaller, more frequent orders.

      Those three numbers work together. The furniture store in worked example 4 holds $200,000 of stock at 3 turns and pays $50,000 a year to carry it at a 25% rate. Reaching 4 turns would cut the stock to $150,000, free $50,000 of cash, and cut the carrying cost to $37,500 a year, because the carrying cost is charged on the smaller stock. The cash freed and the cost saved are two views of the same improvement, and both come from the same division.

      Turnover also sits at the heart of your cash conversion cycle: the time between paying suppliers and collecting cash from customers. The slower your inventory turns, the longer that gap, and the more outside financing you need to bridge it. A seller who turns stock 6 times a year gets the cash back every 60.8 days; a seller turning twice a year waits 182.5 days. That gap is the difference between funding growth from sales and funding it from a loan. Our Cash Flow Calculator maps the wider picture, and our Break-Even Calculator shows the sales volume that covers your costs at any stock level.

      Common mistakes

      Using sales instead of COGS. The most common error, and the most flattering. Sales include your margin; inventory is at cost. Dividing sales by inventory inflates the ratio by your markup. With $800,000 of sales, a 40% margin, and $100,000 of stock, the sales-based figure is 8 and the COGS-based figure is 4.8. Use COGS, and never compare a sales-based ratio against a COGS-based benchmark.

      Measuring a single snapshot. Dividing annual COGS by one balance sheet date gives a ratio that depends entirely on which date you picked. The toy shop above measures 3 in October and 12 in January from the same year of trading. Average the endpoints at minimum, and average 12 month-end balances when you can.

      Mixing periods. COGS for a year divided by inventory averaged over a quarter is not a ratio, it is a category error. Both figures must cover the same period, and the period you enter must match the figures you entered. A quarterly COGS with a 365-day period understates the ratio by a factor of four.

      Chasing the band instead of the trend. The bands are typical ranges for whole trades, and your shop is not a whole trade. A ratio inside the band but falling for three quarters is a worse sign than a ratio below the band but rising. Track your own number quarter over quarter, and use the band to set the direction, not the destination.

      Reading the blended ratio and stopping. Turnover is an average across your whole catalog, and averages hide as much as they reveal. Take a shop with two lines: SKU A has COGS of $120,000 and average inventory of $10,000, turning 12 times a year, or 30.4 days of stock. SKU B has COGS of $30,000 and average inventory of $40,000, turning 0.75 times a year, or 486.7 days of stock. The blended ratio is ($120,000 + $30,000) / ($10,000 + $40,000) = 3, or 121.7 days. The blended number looks ordinary. The truth is one line flying and one line dead. Run the ratio per SKU, per category, or per supplier before you act on the headline number.

      Forgetting what turnover does not say. Turnover measures speed, not profit. Fast turns on a product with a negative contribution margin just means you are losing money quickly. Pair the ratio with margin before you decide a fast line is a good line: our Profit Margin Calculator works out margin and markup on any product, and our Markup Calculator prices the markup you need. Turnover is also backward-looking: a 12-month ratio tells you how efficiently you operated over the past year, not what is happening now. A rolling quarterly calculation catches turns in the trend months earlier.

      Features

      Two ways to enter inventory. Beginning and ending inventory from your balance sheets, with the average worked out for you, or an average inventory you worked out yourself, for example from 12 month-end balances. The choice is yours, and the steps show which one was used.

      Any period, with honest day counts. The default period is a full year, but any whole number of days from 1 to 3660 works. Days of inventory on hand always use the period you entered, and the basis is stated on the result. Quarterly figures are annualized before they are compared against the annual benchmark bands.

      Benchmark bands by retail category. Twelve categories, each with a typical annual band from published retail guides verified on 20 November 2026. The comparison tests your unrounded ratio against the band edges, so a ratio of 3.996 against a band starting at 4 is honestly below, even though it displays as 4.

      Target turnover and cash freed. Enter the turns you want to reach and the calculator shows the average inventory that pace needs, the cash it frees or the extra stock it needs, and the days on hand at that pace.

      Carrying cost. Enter your annual carrying rate and the calculator prices what holding your stock costs each year. At 25%, $200,000 of stock costs $50,000 a year to hold.

      One more turn. Every result shows what a single extra turn would release in cash, so the value of faster stock is always in front of you.

      Honest edge cases. Zero COGS gives a turnover of 0 and no days figure, with an explanation instead of a made-up number. Zero average inventory is refused with a clear message, because dividing by zero has no answer, and the message notes that turnover does not apply to a business that holds no stock at all, such as a dropshipper. A ratio below 0.01 shows as 0 and says so.

      Warnings that earn their place. The tool warns when stock turns less than once in the period, when stock sits over 6 months, when the annualized pace passes 20 turns, when beginning and ending inventory differ by more than double, and when a turnover target has no sales to work against. Each warning fires only when its condition holds.

      Full working, printed. Every step is shown in order, with the numbers you entered, so any figure can be checked by hand. Displayed equations balance on the printed numbers: days are worked out from the displayed turnover, weeks from the displayed days, and the annualized figure from the displayed turnover.

      Use cases

      The small shop owner at year end. You have your year-end accounts: COGS from the income statement, opening and closing stock from the balance sheets. Enter them, pick your category, and you have your turnover, your days of stock, and your position against the trade, plus the cash a faster pace would free. Run it again next year and the trend is the story.

      The marketplace seller planning a buy. You sell on marketplaces and hold stock at home or in a prep center. Run the calculator on the last quarter to see how fast stock moved, annualize it, and compare it against your category. Then run the target: if you want to turn 8 times a year, the tool shows the stock level that pace needs, so your next purchase order has a ceiling instead of a guess. Pair it with our Marketplace Profit Comparison Calculator to see what each sale keeps after fees, and our Seller Return Cost Calculator to price the returns that come with faster selling.

      The seasonal shop checking a build. You build stock ahead of a peak season and your ratio falls. Is that a warning or the plan working? Run the calculator on the full year rather than the build quarter, and compare the build against the sell-through that followed it. A falling ratio during a deliberate build is not a problem; a falling ratio with no peak to justify it is.

      The wholesaler or distributor reviewing terms. Distributors turn stock 4.2 times a year on the listed-company average, holding 87.6 days of stock. If your ratio sits well below that, the cash tied up in the warehouse is the first place to look before asking a lender for more working capital. The carrying cost figure puts a yearly price on the gap.

      The buyer clearing slow lines. Run the ratio per category or per supplier and rank them. The lines turning below 1 are the candidates for markdown, bundle, or outlet clearance. A 30% markdown that sells today usually beats full price that sells in 8 months, once storage costs and the opportunity cost of the trapped cash are counted.

      The lender or investor reading a business. Turnover is one of the first ratios a financing partner looks at, because it shows how efficiently cash is working. A ratio inside the category band with a rising trend is a strong signal; a ratio far below the band with no explanation is the first question to ask. Run the numbers before the meeting, not during it.

      Sources

      Every figure on this page was verified against its publisher on 20 November 2026. The formula itself is textbook retail mathematics, stable for decades; the bands and the listed-company averages are the dated figures, and each carries its date below.

      • Smartsheet, "How to Calculate Inventory Turnover: Formula and Examples", published June 27, 2025, updated December 12, 2025. Industry benchmark table: grocery retail 10 to 20, apparel and fast fashion 6 to 10, electronics retail 4 to 8, furniture and home goods 2 to 4, auto dealerships 1.5 to 3, restaurants 8 to 15, pharmacies 10 to 15, bookstores 2 to 5, luxury goods 1 to 3, consumer packaged goods 8 to 12. Also notes that a ratio above 12 or 15 in most industries may signal understocking. How to Calculate Inventory Turnover.
      • Wayflyer, "Inventory Turnover Ratio: Formula, Calculator and Benchmarks", October 1, 2026. Benchmark table: grocery, food and beverage 12 to 20 or more, consumer electronics 6 to 10, beauty and personal care 4 to 8, fashion and apparel 4 to 6, sports and outdoor 4 to 6, home and furniture 2 to 4. Most consumer brands should target 4 to 6. Walmart inventory turnover 9.1 for the fiscal year ended January 31, 2026, about 40 days of inventory on hand. Inventory Turnover Ratio.
      • RetailOps Toolkit, "Inventory Turnover Benchmarks by Industry", benchmarks last reviewed August 10, 2026. Apparel and fashion 4 to 6, grocery and supermarkets 14 to 20, consumer electronics 6 to 10, home and furniture 2 to 4, health and beauty 6 to 10, luxury and jewelry 1 to 3, sporting goods 3 to 5, home improvement 4 to 6, pet supplies 6 to 9. Ranges anchored to CSIMarket public-company inventory turnover data by sector, cross-checked against named-retailer 10-K filings. Inventory Turnover Benchmarks by Industry.
      • NYU Stern (Aswath Damodaran), "Working Capital Ratios by Sector (US)", data as of January 2026. Inventory as a share of sales by industry, including retail grocery and food 5.49%, retail general 8.67%, retail special lines 18.76%, retail building supply 16.81%, retail automotive 16.62%, retail distributors 16.67%, furniture and home furnishings 18.29%, apparel 19.25%, restaurant and dining 2.17%, food wholesalers 6.62%, electronics consumer and office 13.63%, electronics general 18.09%, household products 11.55%, food processing 13.41%. Working Capital Ratios by Sector.
      • NYU Stern (Aswath Damodaran), "Operating and Net Margins", data as of January 2026. COGS as a share of sales by industry, including retail grocery and food 73.69%, retail general 66.82%, retail special lines 64.70%, retail building supply 65.78%, retail automotive 78.04%, retail distributors 69.43%, furniture and home furnishings 69.72%, apparel 43.12%, restaurant and dining 67.76%, food wholesalers 84.56%, electronics consumer and office 61.23%, electronics general 73.24%, household products 48.96%, food processing 76.77%. Turnover in the table above is COGS over sales divided by inventory over sales, for each industry. Operating and Net Margins.

      Conflicts resolved at build. Where the guides disagreed on a band, the band printed is the range at least two cited guides agree on: grocery 12 to 20 (Wayflyer 12 to 20 or more, Smartsheet 10 to 20, RetailOps Toolkit 14 to 20), apparel 4 to 6 (Wayflyer and RetailOps Toolkit; Smartsheet gives 6 to 10 for apparel and fast fashion), electronics 6 to 10 (Wayflyer and RetailOps Toolkit; Smartsheet gives 4 to 8), sporting goods 4 to 5 (the overlap of Wayflyer 4 to 6 and RetailOps Toolkit 3 to 5). Restaurants, health and beauty, and fast fashion as a separate band were dropped because the guides do not agree well enough to print a band for them: no band for health and beauty survives all three guides, the restaurant figures measure different things, and the published fast-fashion bands range from 6 to 15 with no agreement. The Damodaran listed-company averages are a separate lens from the guide bands: listed companies are far larger than a small shop, and some sectors mix manufacturers with retailers, so the two are never blended into one figure.

      Figures in this article were verified against the sources above on 20 November 2026. The bands are typical ranges from published retail guides, not pass or fail grades, and the Damodaran figures are calculated from the published ratios as shown. No live prices are used anywhere in this tool.

      Frequently asked questions

      What is a good inventory turnover ratio?

      It depends on your category. For most consumer brands, a good ratio falls between 4 and 6 turns a year, selling through full stock every 2 to 3 months. Grocery and food retail typically turns 12 to 20 times a year, consumer electronics 6 to 10, apparel and fashion 4 to 6, furniture and home goods 2 to 4, and luxury and jewelry 1 to 3. A ratio below 2 usually signals too much cash tied up in stock, while a very high ratio can mean stockouts. Compare against your category band first, then against your own trend quarter over quarter.

      How do I calculate inventory turnover?

      Divide your cost of goods sold by your average inventory for the same period. Average inventory is your beginning inventory plus your ending inventory, divided by 2. A shop with $500,000 of COGS, $80,000 of stock at the start of the year, and $120,000 at the end has an average inventory of $100,000 and a turnover of 5 times a year. Use COGS, not sales: inventory is recorded at cost, so dividing sales by inventory inflates the ratio by your markup.

      How do I calculate days of inventory on hand?

      Divide the days in the period by the turnover ratio. On a full year, days of inventory on hand is 365 divided by turnover: a turnover of 5 gives 73 days, and a turnover of 4 gives 91.3 days. On a quarter, use 90 days: a turnover of 6 in the quarter gives 15 days. The measure is also called days sales of inventory and days inventory outstanding. It is the same conversion, and it tells you how long the average item sits before it sells.

      What is the difference between inventory turnover and days sales of inventory?

      They are two views of the same measure. Inventory turnover counts how many times you sell through stock in the period, and days sales of inventory tells you how long the average item sits before it sells. One is the other divided into the period: 5 turns a year is 73 days of stock, and 73 days of stock is 5 turns a year. Turns suit comparisons against benchmarks, which are published in turns. Days suit planning, because they map directly onto supplier lead times and cash flow forecasts.

      Should I use COGS or sales in the formula?

      Use COGS. Inventory is recorded at cost on the balance sheet, so the numerator and the denominator must both be at cost. A shop with $800,000 of sales, a 40% gross margin, and $100,000 of average inventory has COGS of $480,000 and a turnover of 4.8. Dividing sales by inventory gives 8, which flatters the business by two thirds and cannot be compared against any published benchmark, because every published band is COGS-based. A sales-based ratio is fine for tracking your own trend, but never compare it against a COGS-based band.

      What does a turnover below 1 mean?

      It means your stock turns less than once in the period, so the average item sits longer than the whole period. On a full year, a turnover of 0.5 means 730 days of stock: two years of inventory on the shelves. Cash is trapped in slow lines, storage costs pile up, and the risk of markdowns and write-offs grows. The usual fixes are clearing slow lines decisively, ordering smaller and more often, and cutting the long tail of SKUs that barely sell. Check first whether the low figure is a deliberate build ahead of a peak season, which is a plan rather than a problem.

      Can inventory turnover be too high?

      Yes. Fast turns free cash, but an extremely high ratio often signals under-stocking: you are losing sales and disappointing customers because products keep running out. Smartsheet notes that a ratio above 12 or 15 in most industries may mean restocking too frequently, risking stockouts, or missing sales due to empty shelves, especially when lead times are long or the supply chain is unstable. This calculator warns when the annualized pace passes 20 turns. Check your stockout rate and your lost-sales log before celebrating a very high number.

      How often should I check inventory turnover?

      Check it every quarter on a rolling basis, and in full once a year. A 12-month ratio is backward-looking: it tells you how efficiently you operated over the past year, not what is happening now. A rolling quarterly calculation catches turns in the trend months earlier. Run the annual figure for benchmark comparisons, because the published bands are annual, and run the quarterly figure for buying decisions. For a seasonal business, compare each quarter against the same quarter last year rather than against the quarter before it, so the season does not masquerade as a trend.