Skip to content

Timber Value Calculator

The species that makes up most of the sale. Mixed loads use mixed hardwoods or mixed oak.

Prices come from the state report for that region. Pick the nationwide range if your state is not covered.

The rule changes the price per MBF: Doyle prices run 1.695 times International prices, Scribner 1.159 times, from the Penn State report.

The total sawtimber volume, from 0.1 to 10,000 MBF. One MBF is 1,000 board feet.

Estimated stumpage value

How the answer was worked out

      This calculator estimates stumpage value from published state price reports, for planning only. It is not an appraisal, and it is not a substitute for a professional timber cruise. Stumpage prices move every quarter and vary by grade, log size, access, and tract size, so get a professional timber cruise before selling, and check the latest state report before you accept any offer.
      Enter your species, region, log rule, and volume in thousand board feet (MBF). The calculator multiplies your volume by the published stumpage price range for that species and region: 10 MBF of white oak in the Northeast, at $161 to $1,049 per MBF International 1/4-inch from the Penn State second quarter 2026 report, is worth an estimated $1,610 to $10,490 on the stump. Doyle and Scribner volumes use the Penn State conversion factors, 1.695 and 1.159. Every answer is a range, never a single price, and every price is date-stamped. Get a professional timber cruise before selling.

      Last reviewed: 21 November 2026. Reviewed every 90 days; next review due 19 February 2027.

      How to use the Timber Value Calculator

      Every woodlot owner eventually asks the same question: what is my timber worth. The question usually arrives with a knock on the door, a letter from a buyer, or a neighbor mentioning what their own sale brought. The honest answer is always a range, never a single number, because standing timber is priced by species, by log size and grade, by the rule the logs are scaled with, and by what the mills near you happen to need this quarter. This calculator gives you that range, built from published state stumpage price reports, with every price date-stamped so you can see exactly how fresh it is.

      To get your estimate, follow these steps:

      1. Pick the species. Choose the species that makes up most of the sale. If the stand is a genuine mix with no dominant species, pick mixed hardwoods for a hardwood mix or mixed oak for an oak mix. Prices differ sharply by species: in the second quarter of 2026, white oak stumpage in Pennsylvania ranged from $161 to $1,049 per MBF, while mixed hardwoods ranged from $53 to $341 per MBF, both on the International 1/4-inch rule. Picking the wrong species is the fastest way to a wrong answer.
      2. Pick the region. Prices come from the state report for that region: Pennsylvania prices for the Northeast, Ohio prices for the Midwest, and Texas prices for the South. If your state is not covered, pick the nationwide planning range, which takes the widest published band for your species across all three regions. A nationwide figure is a planning number, not a local price, so check your own state forestry report for a tighter figure before you talk to a buyer.
      3. Pick the log rule your volume was scaled by. A thousand board feet is not the same amount of wood under every rule. Doyle counts the fewest board feet in a log, Scribner counts more, and International 1/4-inch counts the most. The price per MBF moves the other way to match: a Doyle MBF costs more than an International MBF, because it stands for more wood. The calculator applies the conversion factors printed on the Penn State report itself: a Doyle price is 1.695 times the International price, and a Scribner price is 1.159 times the International price. If your cruise or your buyer quotes a rule, use that rule here.
      4. Enter the volume in thousand board feet (MBF). One MBF is 1,000 board feet. Enter the total sawtimber volume, from 0.1 MBF (100 board feet, about one small log) up to 10,000 MBF. If you know your logs but not your volume, measure them with our Log Board Foot Calculator, which works out Doyle, Scribner, and International 1/4-inch board feet from diameter and length, then enter the total here.
      5. Read the full result, not just the headline. The headline gives the low to high value range on the stump. The cards show the low end and the high end with the price per MBF behind each. The guidance explains the result in plain language and says how wide the range is and why. The warnings flag the things that could push a real sale outside the band, such as a Doyle-scaled volume, a small sale, or a state report built on few responses. The steps print the full working, so you can check every figure with your own arithmetic.

      Try the example buttons under the form. The first is the classic case: 10 MBF of white oak in the Northeast on the International rule, worth an estimated $1,610 to $10,490 on the stump at $161 to $1,049 per MBF. The second is a high-value sale: 5 MBF of black walnut in the Midwest on the Doyle rule, worth an estimated $7,500 to $15,000 at $1,500 to $3,000 per MBF Doyle. The third is a southern pine sale: 50 MBF of southern yellow pine in the South on the International rule, worth an estimated $10,300 to $11,300 at $206 to $226 per MBF. Each example shows a different shape of the answer, and each one prints its working in the steps.

      One warning belongs at the top, and it is the most important sentence on this page: get a professional timber cruise before selling. This calculator estimates value from published averages and ranges. A cruise measures your trees, grades your logs, and tells you what a buyer will actually pay for your timber, on your ground, this quarter. No calculator replaces that, and no buyer should expect you to sell without it.

      What stumpage means, and what it does not include

      Stumpage is the price of standing timber: what the trees are worth while they are still rooted in the ground, before anyone cuts them. When you sell stumpage, the buyer pays for the right to harvest the trees, and the buyer pays the logging crew, the trucks, the fuel, and the mill. What you keep is the stumpage price. That is the number this calculator estimates, and it is the number the state reports publish.

      Stumpage is not the same as the delivered log price, and confusing the two is the most common pricing mistake a landowner makes. The delivered log price is what a mill pays for logs dropped at its gate, and it includes the cost of cutting and hauling plus the logger's margin. Stumpage is always lower, because the logger's costs come out of the delivered price before the landowner is paid. The Ohio Timber Price Report for spring 2026 shows the gap plainly: white oak sawlogs delivered to the mill averaged $1,133 per MBF Doyle, while white oak stumpage averaged $940 per MBF Doyle. Red oak delivered averaged $538 per MBF Doyle against $467 on the stump, and hard maple delivered averaged $670 against $468 on the stump. The gap is the cost of getting the trees from your woods to the mill, and it grows when fuel is expensive, when the ground is steep or wet, or when the tract is far from the mill.

      Stumpage is also not the lumber price. A board foot of lumber at a store has been sawn, dried, graded, and shipped, and it sells for several times the stumpage value of the wood in it. A landowner who multiplies their volume by a lumber price will overstate the value of their timber by a wide margin. The chain runs stumpage to delivered logs to lumber, and each step adds cost and takes a margin. Your share is the first step.

      Stumpage is quoted in dollars per MBF for sawtimber, and in dollars per ton for pulpwood. One MBF is 1,000 board feet, and a board foot is a slab of wood 12 inches square and 1 inch thick. Sawtimber is priced by the MBF because it is sold by the board foot of lumber it will yield. Pulpwood is priced by the ton because it is sold by weight to a pulp mill or a biomass plant, and its value per ton is far lower: Texas pine pulpwood averaged $5.04 per ton in May and June 2026, against $26.38 per ton for pine sawtimber in the same report. The calculator prices sawtimber by the MBF. Pulpwood has its own section below, with the published per-ton figures.

      Finally, stumpage is a market price, not a fixed tariff. It moves every quarter with lumber demand, housing starts, export markets, fuel costs, and how much timber is on offer near you. The same white oak that averaged $727 per MBF in northeast Pennsylvania in the first quarter of 2026 averaged $490 there in the second quarter. The Ohio report for spring 2026 showed stumpage down 15 to 29 percent from the fall of 2025 for most major species. That is why every price in this calculator carries its date, and why the calculator is reviewed every quarter: a price without a date is a guess.

      The three log rules: Doyle, Scribner, and International 1/4-inch

      A log rule is a formula that estimates how many board feet of lumber a log will yield. It is not a measurement of the wood in the log. It is a prediction of what the saw will get out of it, after the slabs are cut off, the saw kerf takes its share, and the taper of the log is allowed for. Three rules dominate in the United States, and they give different answers for the same log, so the rule matters as much as the diameter.

      The Doyle rule is the oldest of the three, and it is still the most common rule for hardwood sawlogs in the South and the Midwest. Its formula is simple: board feet equal the small-end diameter in inches minus 4, squared, times the length in feet, divided by 16. For a 12-inch log, 16 feet long, Doyle gives (12 minus 4) squared times 16 divided by 16, which is 64 board feet. Doyle subtracts 4 inches from the diameter for slabs and edging, which is a fair allowance on a big log and a harsh one on a small log. On a 6-inch log it allows almost nothing: Doyle scales a 6-inch, 16-foot log at 4 board feet, against 20 by the International table. Doyle is fair on large logs and punishes small ones, which is why buyers who purchase by Doyle like small logs and sellers who sell by Doyle should be wary of them.

      The Scribner rule was drawn from diagrams in 1846: circles for the log ends, with 1-inch boards and a 1/4-inch saw kerf fitted inside. It is published as a table, by diameter and length, and it is the standard rule in the western United States and on most federal timber sales there, often as Scribner Decimal C, which rounds the table to tens of board feet. A formula form, (0.79 times the diameter squared, minus 2 times the diameter, minus 4) times the length divided by 16, follows the table within a few percent: for the same 12-inch, 16-foot log it gives about 86 board feet, against 80 in the Decimal C table. Scribner sits between Doyle and International on small logs and close to International on large ones.

      The International 1/4-inch rule, published by Judson Clark in 1906, is the most accurate of the three, because it allows a 1/4-inch saw kerf and adds half an inch of diameter for every 4 feet of length to account for taper. It is also published as a table. A 12-inch, 16-foot log scales 95 board feet by the International table, against 64 by Doyle and 80 by Scribner Decimal C. The gap closes as logs get bigger: on a 24-inch, 16-foot log, Doyle gives 400, Scribner gives 400, and International gives 425, so the three rules nearly agree. On a small log they disagree by half, which is why the rule must always be named when a volume is quoted.

      The table below shows the published table values for a 16-foot log at each diameter, from the log rule tables compiled by Koch in 1972. Read across a row to see how far apart the rules sit on the same log.

      Small-end diameter, 16-foot logDoyle (board feet)Scribner Decimal C (board feet)International 1/4-inch (board feet)
      8 inches163040
      10 inches366065
      12 inches648095
      14 inches100110135
      16 inches144160180
      18 inches196210230
      20 inches256280290
      24 inches400400425

      The practical point for a seller is that the rule and the price travel together. A Doyle MBF is worth more than an International MBF, because it stands for more wood: the same logs scale fewer board feet under Doyle, so each Doyle board foot carries more of the value. The Penn State report prints the conversion factors on the report itself: a Doyle price is 1.695 times the International price, and a Scribner price is 1.159 times the International price. That is why 10 MBF of white oak in the Northeast is worth $1,610 to $10,490 on the International rule and $2,730 to $17,780 on the Doyle rule: the Doyle price per MBF is $273 to $1,778, against $161 to $1,049 per MBF International. The two answers describe the same trees. The Doyle figure is higher because a Doyle MBF is a bigger unit of wood, not because the trees are worth more.

      Two traps catch sellers here. The first is comparing a Doyle volume with an International price, or the other way around. A buyer who quotes $500 per MBF without naming the rule has quoted nothing: $500 per MBF Doyle and $500 per MBF International are different prices for the same logs. Always ask which rule a price is quoted on, and always name the rule when you quote a volume. The second trap is the Doyle small-log discount. If your sale is mostly small logs, a Doyle scale will count far fewer board feet than the mill will actually saw, and the overrun, the lumber the mill recovers above the scaled volume, goes to the buyer. A cruise that reports volume under two rules, or that lists log diameters, lets you see how much the rule is costing you.

      How the calculator prices your timber

      The calculator works in four steps, and the steps panel on your result shows each one with its figures, so you can check the arithmetic by hand.

      First, it takes your species and region and looks up the published stumpage price band for that pair. The Northeast bands come from the Penn State Extension Pennsylvania Timber Market Report for the second quarter of 2026, which reports prices by species for four Pennsylvania regions as an average with one standard deviation on either side. The calculator takes the statewide envelope: the lowest regional low and the highest regional high. For white oak that gives $161 to $1,049 per MBF International 1/4-inch. The Midwest bands come from the Ohio Timber Price Report for spring 2026, which reports statewide stumpage ranges on the Doyle scale: white oak $700 to $1,200 per MBF Doyle. The South bands come from Texas Timber Price Trends for May and June 2026, which reports average prices by region: pine sawtimber $205.80 per MBF in Southeast Texas and $225.67 per MBF in Northeast Texas, so the band is $206 to $226 per MBF after rounding to the nearest dollar.

      Second, it converts every band to a common basis, dollars per MBF International 1/4-inch. The Penn State bands are already on that basis. The Ohio bands are Doyle, so they are divided by 1.695, the Penn State conversion factor: white oak $700 to $1,200 per MBF Doyle becomes $413 to $708 per MBF International. The Texas figures are reported in dollars per MBF converted from tons, 8 tons to the MBF for pine and 9 tons to the MBF for hardwood, and the calculator treats them as International-basis figures. That treatment is a judgment call, recorded in the notes for this tool: Texas sales are usually priced by the ton in practice, and the per-ton figures are printed in the South table below so you can cross-check by weight.

      Third, it converts the International price to the price for your log rule, using the same Penn State factors in the other direction: the Doyle price is the International price times 1.695, and the Scribner price is the International price times 1.159. The International price needs no conversion. Prices are rounded to whole dollars at this step, before any multiplication, so the working in the steps panel always balances on the printed numbers.

      Fourth, it multiplies your volume by the low price and by the high price. The two products are the low end and the high end of your estimate, each rounded to the nearest dollar. The answer is always a range. The calculator never gives a single price, because no single price is honest: the published reports themselves show wide spreads, and your trees sit somewhere inside them, not at a point.

      A worked example, using the steps panel figures. Take 25 MBF of red oak in the Northeast, scaled by the Scribner rule. The Penn State band for red oak is $201 to $869 per MBF International. The Scribner price is $201 times 1.159, which is $233 per MBF at the low end, and $869 times 1.159, which is $1,007 per MBF at the high end, both rounded to the nearest dollar. The low value is 25 MBF times $233, which is $5,825. The high value is 25 MBF times $1,007, which is $25,175. The estimate is $5,825 to $25,175 on the stump. The range is wide because the published band is wide: red oak prices in the report span more than fourfold from the lowest regional figure to the highest.

      A second example, from the Midwest. Take 20 MBF of white oak in Ohio, scaled by the International rule. The Ohio spring 2026 band is $700 to $1,200 per MBF Doyle, which divides by 1.695 to $413 to $708 per MBF International. No rule conversion is needed, because the volume is already International. The low value is 20 MBF times $413, which is $8,260. The high value is 20 MBF times $708, which is $14,160. The estimate is $8,260 to $14,160 on the stump.

      Some species and region pairs have no published price, and the calculator says so plainly instead of inventing one. Black walnut has no published stumpage band in the Northeast report, southern yellow pine has none in the Northeast or the Midwest reports, and the Ohio report's accessible text gives statewide means but no ranges for hard maple and yellow-poplar, so those two are not priced in the Midwest here. When no price covers your pair, the calculator shows no value and points you to the state report for that region. That is a gap in the published data, not a gap in your timber: a forester can price any species locally, and the cruise is the way to get that number.

      Stumpage prices by region

      Three state reports feed this calculator, and each one works differently. Penn State reports regional averages with standard deviations. Ohio reports statewide ranges and means. Texas reports regional averages by the ton and by the MBF. The tables below print the figures the calculator uses, with the dates and the units, so you can see the source of every number behind your estimate.

      Northeast: Pennsylvania, second quarter 2026

      The Pennsylvania Timber Market Report is published quarterly by Penn State Extension, from prices reported by Pennsylvania timber and logging companies, forestry consultants, and state land management agencies. The second quarter 2026 report, updated 1 October 2026, covers April to June 2026 and quotes stumpage in dollars per MBF International 1/4-inch, by species for four regions: Northeast, Southeast, Northwest, and Southwest. Each regional figure is an average with one standard deviation on either side, and the number of reports behind it. The calculator uses the statewide envelope of those regional bands, which is the table below. Read it as the full spread of reported prices across the state, not as a prediction for one tract.

      SpeciesLow ($/MBF)High ($/MBF)
      White oak$161$1,049
      Northern red oak$201$869
      Black cherry$155$846
      Hard maple$114$599
      Soft maple$74$542
      Yellow-poplar$124$424
      Mixed oak$96$688
      Mixed hardwoods$53$341
      White ash$69$252
      White pine$43$175
      Hemlock$11$135

      Two things stand out in this table. The first is how wide the bands are. White oak spans $161 to $1,049, more than a sixfold range, because the report pools veneer-grade logs with pallet-grade logs, large tracts with small ones, and strong local markets with weak ones. The second is the small sample behind some figures. The Northwest region reported 19 black cherry sales and 20 soft maple sales in the quarter, which is a solid base, but the Southwest reported only 3 white oak sales, and several species rest on a single report in a region. Penn State prints the number of reports beside every figure, and the calculator warns you about thin samples for that reason: the ends of a band built on one or two sales are the least reliable numbers in it.

      Regional averages tell a tighter story than the statewide envelope. In the second quarter of 2026, white oak averaged $490 per MBF in the Northeast, $698 in the Southeast, $580 in the Northwest, and $662 in the Southwest. Northern red oak averaged $472, $587, $532, and $554 across the same four regions. Black cherry averaged $618 in the Northeast and $486 in the Northwest, and hard maple averaged $402 in the Northeast, $433 in the Northwest, and $313 in the Southwest. If your tract sits in one Pennsylvania region, the regional average is a better starting point than the statewide band, and the full report prints all four regions for every species.

      Prices also moved between quarters. White oak in the Northeast averaged $727 per MBF in the first quarter of 2026 and $490 in the second. Northern red oak in the Northeast went from $549 to $472, and black cherry in the Northeast from $848 to $618. Some of that movement is real price change and some is sample change, because different sales report each quarter, but the direction was down for the big species in the first half of 2026. A landowner who prices a sale on a year-old report is pricing on a different market.

      Midwest: Ohio, spring 2026

      The Ohio Timber Price Report is produced twice a year by Ohio State University Extension, from prices reported by Ohio forest products companies, and it lists both delivered sawlog prices and stumpage prices on the Doyle scale. The report dated 31 July 2026 compares spring 2026 (March to May) with fall 2025 (September to November). The stumpage table below gives the statewide ranges the calculator uses, with the statewide mean beside each, and the International equivalent the calculator works from.

      SpeciesStumpage range ($/MBF Doyle)Statewide mean ($/MBF Doyle)International equivalent ($/MBF)
      Black walnut$1,500 to $3,000$1,958$885 to $1,770
      White oak$700 to $1,200$940$413 to $708
      Red oak$300 to $750$467$177 to $442
      Black cherry$230 to $500$353$136 to $295

      The Ohio report also published statewide stumpage means for two species whose ranges were not recoverable from the accessible text of the report: hard maple at $468 per MBF Doyle and yellow-poplar at $305 per MBF Doyle. The calculator does not price those two in the Midwest, because a mean without a range cannot make an honest range estimate. The next quarterly refresh will fill them in from the full report.

      The Ohio story in spring 2026 was a falling market. Stumpage means fell from fall 2025 to spring 2026 by 22 percent for walnut, 27 percent for white oak, 15 percent for red oak, 29 percent for hard maple, 27 percent for yellow-poplar, and 19 percent for cherry. Delivered log prices fell less: white oak delivered slipped only 1 percent, from $1,150 to $1,133 per MBF Doyle. When the delivered price holds and the stumpage price falls, the gap is being taken by logging and hauling costs, which rose with diesel. For a landowner, that is the practical meaning of the spread between the two prices: your share shrinks when the cost of getting the wood out grows.

      Ohio cherry is worth a note beside Pennsylvania cherry. Ohio black cherry stumpage averaged $353 per MBF Doyle in spring 2026, about $208 per MBF International, while Pennsylvania black cherry averaged $486 to $618 per MBF International in the second quarter. The difference is real, not a conversion error: Pennsylvania, and the Allegheny region in particular, grows the cherry the furniture and export markets pay a premium for, and Ohio cherry of the same species sells lower. Species alone does not set the price. Where the tree grew, and who buys it there, matters as much.

      South: Texas, May and June 2026

      Texas Timber Price Trends is a bimonthly report from the Texas A and M Forest Service, built from actual timber sales reported by as many as 60 cooperators in the East Texas timber market. The May and June 2026 issue, volume 44 number 3, reports stumpage in dollars per ton and dollars per MBF, for Northeast Texas, Southeast Texas, and statewide. The table below gives the headline figures.

      ProductStatewide ($/ton)Statewide ($/MBF or $/cord)Northeast Texas ($/MBF)Southeast Texas ($/MBF)
      Pine sawtimber$26.38$211.08$225.67$205.80
      Pine Chip-N-Saw$13.62$36.76 per cord--
      Pine pulpwood$5.04$13.61 per cord--
      Mixed hardwood sawtimber$38.45$346.06$331.34-

      Three things about the Texas report shape how the calculator uses it. First, Texas reports averages, not ranges, so the calculator's South band is the spread between the regional averages: $206 to $226 per MBF for pine sawtimber, and $331 to $346 per MBF for mixed hardwood sawtimber, after rounding to the nearest dollar. That band is narrower than the true spread of individual sales, and the calculator warns you about that on every South result. Second, Texas converts tons to MBF with fixed factors, 1 MBF equals 8 tons for pine sawtimber and 9 tons for hardwood sawtimber, so the dollars-per-MBF figures are weight conversions, not log-rule scales. Third, the volumes behind the averages are large: the May and June 2026 averages rest on 123,436 tons of pine sawtimber, 145,482 tons of pine pulpwood, 39,294 tons of pine Chip-N-Saw, 1,095 tons of mixed hardwood sawtimber, and 5,155 tons of hardwood pulpwood. The hardwood sawtimber average rests on far fewer tons than the pine average, so treat it as the thinner figure.

      The Texas market was also falling. Statewide pine sawtimber averaged $26.38 per ton in May and June 2026, down 7 percent from the previous period and down 14 percent from a year earlier, when it averaged $30.82 per ton. Pine pulpwood averaged $5.04 per ton, down 16 percent from a year earlier, and Chip-N-Saw averaged $13.62 per ton, down 10 percent from a year earlier. Mixed hardwood sawtimber was the exception, up 2 percent from the previous period at $38.45 per ton. The January and February 2026 issue had shown pine sawtimber at $27.79 per ton statewide, so the slide through the first half of 2026 was steady rather than sudden.

      What moves your price inside the range

      The calculator gives you a range because the published reports give ranges, and the reports give ranges because real sales vary. Six things move a sale inside the band, and most of them are under your control or at least visible before you sell.

      Grade comes first. A straight, clear, defect-free log of good diameter is a veneer or grade sawlog, and it sells at the top of the band or above it. A short, crooked, knotty log is a pallet log or a blocking log, and it sells at the bottom. The Ohio report shows the spread inside one species: in spring 2026, walnut sawlogs delivered to the mill averaged $2,138 per MBF Doyle for prime grade, $1,275 for number 1 common, $875 for number 2 common, and $458 for blocking. White oak prime delivered averaged $1,425 per MBF Doyle against $325 for blocking. Grade is set by the tree, not by the seller, but a cruise grades your logs before the sale, so you know what you are selling instead of letting the buyer grade it for you.

      Diameter comes second. Large logs saw more lumber per log, with less waste, so mills pay more per board foot for them. The Doyle rule already punishes small logs on volume, and the market punishes them again on price. A stand of 20-inch oaks is worth far more per MBF than a stand of 10-inch oaks of the same species, even before the rule is counted. This is also why patience pays: a stand that is left to grow gains value twice, once in volume and once in price per MBF, as the trees move into larger diameter classes.

      Species mix comes third. A sale that is mostly white oak and black cherry is worth more than a sale of the same volume that is mostly soft maple and mixed hardwoods, because the species bands barely overlap: white oak in Pennsylvania ran $161 to $1,049 per MBF in the second quarter of 2026, while soft maple ran $74 to $542 and mixed hardwoods $53 to $341. When a buyer offers one price for everything on the tract, that price is an average across your species mix, weighted toward the cheapest species in it. A cruise that breaks the volume out by species lets you check the blend.

      Access and ground come fourth. A flat tract beside a good road, with dry ground and room to land the logs, costs less to harvest than a steep tract a mile from the nearest road over wet ground, and the logger's cost comes out of your stumpage. The same trees on easy ground are worth more on the stump than on hard ground, because less of the delivered price is eaten by getting them out. Winter logging on frozen ground can open tracts that are too wet in summer, and a forester will tell you which season suits your ground.

      Tract size comes fifth. A buyer has fixed costs on every sale: moving equipment in, building a landing, and arranging trucking. Those costs spread thin over a large sale and thick over a small one, so small sales sell at the low end. The calculator warns you when the volume is under 1 MBF, because less than a truckload is a hard sale at any price. Neighbors with adjoining woodlots sometimes sell together to reach a size that attracts competitive bids.

      Local demand comes sixth, and it changes fastest. A new mill opening nearby, a cooperage buying white oak staves, a flooring plant running short of hard maple, or an export buyer active in your region can lift local prices well above the state average. The reverse is just as true: a mill closure or a logging slowdown can leave your timber with one buyer and one low bid. The state reports are averages across regions, and your local market on the week you sell is what sets your price. That is the strongest argument for sealed bids from several buyers, which is the subject of the selling section below.

      Pulpwood, Chip-N-Saw, and the rest of the tree

      Not every tree in a sale is a sawlog. The tops, the small stems, the crooked trees, and the species nobody saws still have value as pulpwood, and in the South the in-between size has its own product, Chip-N-Saw. The calculator prices sawtimber only, because sawtimber is where the money is, but a sale usually includes these smaller products, and knowing their prices keeps a buyer honest about them.

      Pulpwood is priced by the ton, and the price is low: a few dollars a ton against tens of dollars a ton for sawtimber. The Penn State report for the second quarter of 2026 shows private hardwood pulpwood in Northwest Pennsylvania at $1.61 to $6.89 per ton, averaging $3.28, and Bureau of Forestry hardwood pulpwood at $1.03 to $9.22 per ton in the Northeast, averaging $3.70, and $3.45 to $11.51 per ton in the Northwest, averaging $7.53. Softwood pulpwood from private sales in the Northwest ran $1.61 to $3.06 per ton, averaging $2.58. In Texas, pine pulpwood averaged $5.04 per ton statewide in May and June 2026, and hardwood pulpwood averaged $7.10 per ton statewide for the whole of 2025. At those prices, pulpwood pays for the harvest of the small material and not much more, which is why a sale that is mostly pulpwood is worth little even at a large tonnage.

      Chip-N-Saw is a southern product for pine trees too small for sawtimber and too good for pulpwood, typically 8 to 12 inches at breast height. Mills chip the outside of the log for pulp and saw the core for lumber, so the product earns a price between the two: Texas Chip-N-Saw averaged $13.62 per ton statewide in May and June 2026, against $26.38 per ton for pine sawtimber and $5.04 per ton for pine pulpwood. A pine thinning that produces mostly Chip-N-Saw is worth roughly half the per-ton price of a sawtimber sale, and a landowner who is offered pulpwood prices for Chip-N-Saw size trees is being underpaid by about $8.50 a ton.

      The conversion factors matter when a buyer quotes by the cord instead of by the ton. A cord is a stacked pile 4 feet by 4 feet by 8 feet, 128 cubic feet of stacked wood, and its weight depends on the species and how green it is. The Texas A and M Forest Service uses 1 cord equals 2.7 tons for pine pulpwood and 2.8 tons for hardwood pulpwood. So Texas pine pulpwood at $5.04 a ton is $13.61 a cord, and the report lists Chip-N-Saw at $36.76 a cord against $13.62 a ton. If a buyer quotes you a cord price, divide by the right factor to get the ton price and compare it with the published per-ton figures.

      Firewood is the last product, and it is the one landowners most often give away. Tops and limbs left after a harvest can be sold as firewood, cut and split, at a price that depends entirely on your local market. Dense hardwoods like oak and hickory give the most heat per cord, so they fetch the best firewood prices. The firewood value will not change the economics of a timber sale, but it is real money, and it should be in the contract rather than left to whoever hauls it away.

      How to sell timber without leaving money behind

      A timber sale is a once-in-a-generation transaction for most landowners. The trees took decades to grow, the sale takes weeks, and the price you accept is the price you live with. The steps below are the standard advice of every state forestry agency, and they are the same steps the Penn State Extension guide to selling timber sets out.

      Get a cruise from a consulting forester. A cruise is a measured inventory of your timber: the species, the diameters, the heights, the grades, and the volume, usually reported in MBF by species and by log rule. A consulting forester works for you, not for a buyer, and is paid by you, usually as a percentage of the sale or a flat fee. A state service forester can also walk your woods and give general advice, and the Ohio Division of Forestry provides service foresters by county for exactly that. What a cruise gives you is a number you can stand on: without it, you are selling an unknown quantity to a buyer who measures it for a living.

      Sell by sealed bid, not by the first offer. A buyer who knocks on your door has priced your timber to leave room for a profit, and a single offer is never a market price. A forester markets the sale to several buyers, sets a bid date, and opens sealed bids, so the buyers compete against each other instead of against your ignorance. The difference between one offer and five bids is often the difference between the low end and the high end of the calculator's range. Lump-sum sales, where the buyer pays one price for the marked timber, suit a well-cruised sale with clear boundaries. Pay-as-cut sales, where the buyer pays by the ton or by the MBF as the wood leaves the tract, suit thinnings and larger tracts, but they need a contract that says how the wood is scaled and who checks the scale tickets.

      Mark the sale and put it in writing. The contract should name the trees being sold, usually by paint marks made by the forester, the boundaries of the sale area, the price and the payment schedule, the time allowed to harvest, the roads and landings the logger may use, how the site will be left, and what happens if the logger damages trees that were not sold. Get the contract in writing before any tree is cut, and have the forester check the harvest while it is under way. A handshake sale is how a landowner loses the trees they meant to keep.

      Time the sale, but do not try to time the market. Timber prices move in cycles, and the first half of 2026 was a falling market in all three states this calculator covers. Waiting for a better price is reasonable when the trees are still growing and gaining value, and it is the only investment where waiting makes the asset bigger. But waiting for the peak is a guessing game, and a landowner who needs the income, or whose stand is mature and slowing, should sell into the market they have rather than the market they hope for. The quarterly reports exist so you can watch the trend: check the latest report before you set a bid date.

      Keep the tax and the paperwork in mind. Timber sale income is generally treated as a capital gain rather than ordinary income for federal tax purposes, and the cost basis of your timber, what you paid for the land and the trees, or their value when you inherited them, reduces the taxable gain. The rules depend on how long you have owned the timber and how the sale is structured, and they change, so talk to a tax professional who knows timber before you sign, not after. Keep the cruise, the contract, the scale tickets, and the payment records together: they are the documents that support your tax return and your next sale.

      Think about the next stand. A harvest is also the start of the next forest. The forester's marking plan should leave the trees that will grow the next crop, protect watercourses and wildlife trees, and control invasive plants that move into the new light. Pennsylvania's Timber Harvesting Essentials video from Penn State Extension names the three things that matter after a harvest: managing competing and invasive plants, reducing deer impact on new seedlings, and getting light to the forest floor. A sale that pays well and leaves a ruined stand is a bad sale, however good the price.

      Worked examples

      Three full examples, each worked through the way the calculator works it, so you can follow the arithmetic from the published price to the value range.

      Example 1: white oak, Northeast, International rule. A landowner in Pennsylvania has a cruise showing 10 MBF of white oak, scaled International 1/4-inch. The Penn State second quarter 2026 band for white oak is $161 to $1,049 per MBF International, so no rule conversion is needed. The low value is 10 times $161, which is $1,610. The high value is 10 times $1,049, which is $10,490. The estimate is $1,610 to $10,490 on the stump. The range is wide because the published band is wide: the low end is pallet-grade oak in a weak local market, and the high end is veneer-grade oak in a strong one. The cruise grades will tell the landowner which end their trees sit near.

      Example 2: black walnut, Midwest, Doyle rule. A landowner in Ohio has 5 MBF of black walnut, scaled Doyle. The Ohio spring 2026 band is $1,500 to $3,000 per MBF Doyle. The calculator converts to International first, $885 to $1,770 per MBF, then converts back to Doyle at 1.695, which returns $1,500 to $3,000 per MBF Doyle, as it should: the round trip through International reproduces the published Doyle band. The low value is 5 times $1,500, which is $7,500. The high value is 5 times $3,000, which is $15,000. The estimate is $7,500 to $15,000 on the stump. On the Scribner rule the same 5 MBF would price at $1,026 to $2,051 per MBF, for $5,130 to $10,255, because a Scribner MBF is a smaller unit of wood than a Doyle MBF.

      Example 3: southern yellow pine, South, International rule. A landowner in East Texas has 50 MBF of pine sawtimber, scaled International 1/4-inch. The Texas May and June 2026 band is $206 to $226 per MBF, from the Southeast Texas average of $205.80 and the Northeast Texas average of $225.67, rounded to the nearest dollar. The low value is 50 times $206, which is $10,300. The high value is 50 times $226, which is $11,300. The estimate is $10,300 to $11,300 on the stump. The range is narrow because Texas reports averages rather than ranges, and the calculator warns that individual sales run wider than the band shown. Cross-check by weight: 50 MBF at 8 tons to the MBF is 400 tons, and 400 tons at the statewide average of $26.38 a ton is $10,552, which sits inside the range, as it should.

      One more example, for the small end of the scale. Half an MBF of hemlock in the Northeast, 500 board feet, at $11 to $135 per MBF International, is worth $6 to $68 on the stump. The arithmetic is exact: 0.5 times $11 is $5.50, rounded to $6, and 0.5 times $135 is $67.50, rounded to $68. The lesson is that low-value species in small volumes are worth almost nothing on the stump, and the cost of getting them out can exceed the price. That is a reason to sell hemlock and other low-value species as part of a larger mixed sale, not on their own.

      To measure the trees behind any of these examples, our Tree Height Calculator works out height from the ground without climbing, and our Tree Age Calculator estimates age from trunk diameter. Height and age do not set the price on their own, but they tell you whether the stand is mature enough to sell and how much volume it is likely to hold.

      Sources

      The prices in this calculator come from the state reports named below, and the log rule figures come from the published rule tables. All sources were re-opened and re-checked on 21 November 2026. The calculator is reviewed every quarter, and the next review is due 19 February 2027.

      • Penn State Extension, Pennsylvania Timber Market Report, Second Quarter, 2026 (April to June 2026, updated 1 October 2026): stumpage prices by species for four Pennsylvania regions, in dollars per MBF International 1/4-inch, with regional averages, standard deviations, and report counts, and the conversion factors printed on the report, Doyle price equals 1.695 times the International price and Scribner price equals 1.159 times the International price. Second Quarter 2026 report.
      • Penn State Extension, Pennsylvania Timber Market Report, First Quarter, 2026 (January to March 2026, updated 27 May 2026): the previous quarter's figures, used here for the quarter-to-quarter comparison. First Quarter 2026 report.
      • Penn State Extension, Timber Market Report index: the quarterly report series, the ten-year pricing trends, the Timber Sales guide to selling timber, the Valuing Standing Timber publication, and the Timber Harvesting Essentials video. Timber Market Report.
      • Ohio State University Extension, Ohio Timber Price Report, 31 July 2026: comparison of prices paid for Ohio sawlogs and stumpage, Doyle scale, spring 2026 (March to May) against fall 2025 (September to November), with statewide stumpage ranges and means by species. Ohio Timber Price Report, July 2026 (PDF).
      • USDA Forest Service, Ohio Timber Price Information: the Ohio Timber Price Report is produced twice a year, in January and July, from prices reported by Ohio forest products companies, listing sawlog and stumpage prices. Ohio Timber Price Information.
      • Texas A and M Forest Service, Texas Timber Price Trends, May/June 2026, volume 44 number 3: bimonthly stumpage prices for East Texas, in dollars per ton and dollars per MBF, by region, with the volumes behind each average. Texas Timber Price Trends, May/June 2026 (PDF).
      • Texas A and M Forest Service, Texas Timber Price Trends, January/February 2026, volume 44 number 1: the previous period's figures, used here for the trend comparison. Texas Timber Price Trends, January/February 2026 (PDF).
      • Texas A and M Forest Service, Stumpage Price Trends in Texas, Annual Summary for 2025: the 2025 annual averages, including hardwood pulpwood at $7.10 per ton statewide, and the conversion factors, pine sawtimber 1 MBF equals 8 tons, hardwood sawtimber 1 MBF equals 9 tons, pine pulpwood 1 cord equals 2.7 tons, hardwood pulpwood 1 cord equals 2.8 tons. Annual Summary for 2025 (PDF).
      • Texas A and M Forest Service, Timber Price Trends index: the full series of bimonthly and annual reports. Texas Timber Price Trends.
      • Koch (1972), board foot log rules, via the Rural Technology Initiative: the published International 1/4-inch, Doyle, and Scribner Decimal C table values by diameter and length used in the log rule table above. Board Foot Log Rules (PDF).

      Frequently asked questions

      How much is my timber worth per acre?

      It depends on how much merchantable volume your acre holds and what species it is, so the honest way to answer is volume times price. A cruise tells you the volume per acre in MBF. Suppose a cruise finds 8 MBF of mixed oak per acre: at the Penn State second quarter 2026 band of $96 to $688 per MBF International, that acre is worth $768 to $5,504 on the stump. The same 8 MBF as white oak, at $161 to $1,049 per MBF, would be $1,288 to $8,392 per acre. Volume per acre varies far more than price per MBF, so a per-acre figure without a cruise behind it is a guess. Get the cruise, find your volume per acre, and enter it in the calculator.

      What is stumpage, and how is it different from the delivered log price?

      Stumpage is the price of standing timber, what the trees are worth while they are still in the ground. The delivered log price is what a mill pays for logs at its gate, and it includes cutting, hauling, and the logger's margin, so it is always higher. In Ohio in spring 2026, white oak sawlogs delivered to the mill averaged $1,133 per MBF Doyle, while white oak stumpage averaged $940 per MBF Doyle. The $193 gap is the cost of getting the trees from your woods to the mill. When you sell stumpage, the buyer pays the logging costs and you keep the stumpage price, which is the number this calculator estimates.

      Doyle, Scribner, or International: which log rule pays the most?

      None of them pays more for the same trees, because the price per MBF moves with the rule. A 12-inch, 16-foot log scales 64 board feet by Doyle, 80 by Scribner Decimal C, and 95 by International 1/4-inch, so a Doyle MBF stands for more wood than an International MBF, and it costs more: the Penn State report converts a Doyle price at 1.695 times the International price and a Scribner price at 1.159 times. What matters is that the price and the volume use the same rule. A Doyle volume priced at an International price understates your value by about 40 percent, and an International volume priced at a Doyle price overstates it by about 70 percent. Always ask which rule a price is quoted on.

      Why is my estimate a range instead of one price?

      Because the published reports themselves show wide spreads, and your trees sit somewhere inside them. White oak stumpage in Pennsylvania in the second quarter of 2026 ranged from $161 to $1,049 per MBF International, a spread of more than sixfold, because the report pools veneer-grade logs with pallet-grade logs, large tracts with small ones, and strong local markets with weak ones. Grade, log size, access, tract size, and local mill demand all move a real sale inside the band. A single number would hide all of that and pretend to a precision no report supports. The range is the honest answer, and a timber cruise narrows it to your trees.

      How often do stumpage prices change?

      Every quarter, and sometimes by a lot. Penn State publishes quarterly, Ohio twice a year, and Texas every two months. White oak in northeast Pennsylvania averaged $727 per MBF in the first quarter of 2026 and $490 in the second. Ohio stumpage means fell 15 to 29 percent from fall 2025 to spring 2026 for most major species. Texas pine sawtimber averaged $27.79 per ton in January and February 2026 and $26.38 per ton in May and June, down 14 percent from a year earlier. Check the latest report before you set a bid date, and treat any price without a date as out of date. This calculator is reviewed every quarter for the same reason.

      Should I sell my timber by lump sum or by the ton?

      It depends on the sale. A lump-sum sale pays one price for the marked timber, agreed before cutting starts, and it suits a well-cruised sale with clear boundaries and known volume: you know exactly what you will be paid. A pay-as-cut sale pays by the ton or by the MBF as the wood leaves the tract, and it suits thinnings and larger tracts where the exact volume is less certain, but it needs a contract that says how the wood is scaled, who checks the scale tickets, and what happens if the scale is disputed. In the South, per-ton sales are the norm, and Texas prices are published by the ton for that reason. In the hardwood regions, lump-sum sales by sealed bid are the usual advice. Either way, get the cruise first and the contract in writing before any tree is cut.

      Do I need a forester to sell timber?

      You are not required to have one, but selling without one means selling an unknown quantity to a buyer who measures timber for a living. A consulting forester cruises your timber, grades the logs, marks the trees to be cut, markets the sale to several buyers, takes sealed bids, writes the contract, and checks the harvest while it is under way. A state service forester can also walk your woods and give general advice, and the Ohio Division of Forestry provides service foresters by county. The forester is paid by you and works for you, which is the point: the buyer's cruiser works for the buyer. Get a professional timber cruise before selling, and sell by sealed bid rather than taking the first offer that knocks on your door.

      What is my pulpwood worth?

      Far less per ton than sawtimber, and it is priced by the ton, not by the MBF. Private hardwood pulpwood in Northwest Pennsylvania averaged $3.28 per ton in the second quarter of 2026, ranging from $1.61 to $6.89, and Bureau of Forestry hardwood pulpwood in the same region averaged $7.53 per ton. Texas pine pulpwood averaged $5.04 per ton statewide in May and June 2026, against $26.38 per ton for pine sawtimber. A load of pulpwood pays for the harvest of the small material and not much more, which is why a sale that is mostly pulpwood is worth little even at a large tonnage. The calculator prices sawtimber only. If your sale includes pulpwood, ask the forester to break it out by the ton in the cruise, and check it against the per-ton figures in the state report.