Skip to content

Propane Tank Runtime Calculator

Cylinders are rated by the weight of propane they hold. Stationary tanks are rated by water capacity, and a full tank holds 80% of that in propane.

What the tank gauge reads now, as a percent of water capacity. A full tank reads 80%: the legal fill limit. Enter 0 for an empty tank.

Appliances on this tank

Enter the BTU per hour from the appliance nameplate and the hours the burner actually fires each day, not the hours the appliance is switched on. Leave a row blank to skip it. A furnace that cycles may fire for 8 hours in a 24-hour day.

Your tank runtime

How the numbers were worked out

      This tool estimates propane tank runtime from the numbers you enter, for general guidance only. It is not a substitute for your supplier's advice or a professional inspection. Tank gauges are approximate, appliance ratings vary, and actual use depends on weather and habits. Never fill a tank past 80%, and call your supplier if you smell propane or your tank runs dry.
      A full 20 lb propane cylinder holds 4.7 gallons, about 429,824 BTU, and lasts 14.3 days feeding a 30,000 BTU grill for an hour a day. A full 500-gallon tank holds 400 gallons, about 36,580,800 BTU, and lasts 44.6 days feeding a home that burns 820,000 BTU a day. Runtime is the BTU in the tank divided by the BTU your appliances burn each day, and the refill call comes when the gauge reads 20%. Enter your tank size, gauge reading, and appliances above for your runtime, per-appliance shares, and refill timing.

      Last reviewed: 21 November 2026. Reviewed every 180 days; next review due 19 May 2027.

      How to use the Propane Tank Runtime Calculator

      Propane is sold by the gallon and burned by the BTU, and the question everyone with a tank asks is the same: how long will what I have left actually last? This calculator answers it from your own numbers. Pick your tank size, enter what the gauge reads, list the appliances on the tank with their BTU ratings and daily hours, and it works out the runtime in days and hours, how much propane each appliance uses, and when to call for a refill. It handles the four tank sizes people actually own: the 20 lb grill cylinder, the 100 lb cabin cylinder, and the 250-gallon and 500-gallon home tanks.

      The answer depends on three things, and only three: how much propane is in the tank, how much energy a gallon of propane carries, and how fast your appliances burn it. A gallon of propane carries 91,452 BTU, the figure the US Energy Information Administration publishes. Your tank holds less propane than its name suggests, because no propane tank is ever filled past 80% of its capacity. And your appliances burn propane only while their burners are actually firing, which for a furnace in winter might be 8 hours out of 24. Get those three inputs right and the runtime follows by simple division. The worked examples below show every step.

      To get your result, follow these steps:

      1. Choose your tank size. Pick the 20 lb cylinder, the 100 lb cylinder, the 250-gallon tank, or the 500-gallon tank. The label shows what a full tank holds in gallons: 4.7 gallons for a 20 lb cylinder, 23.6 for a 100 lb cylinder, 200 for a 250-gallon tank, and 400 for a 500-gallon tank. If you own a different size, such as a 120-gallon or 1,000-gallon tank, pick the closest size and read the result as an estimate, or scale the runtime by the ratio of the full fills: a 120-gallon tank holds 96 gallons when full, which is 48% of a 250-gallon tank, so it lasts 48% as long at the same daily use.
      2. Enter the gauge reading. Read the percent from your tank gauge and enter it as a number from 0 to 100. A full tank reads 80%, because the gauge measures percent of water capacity and the legal fill limit is 80% of water capacity. The default is 80, a full tank. Enter 0 for an empty tank. If your gauge reads above 80%, the tank is overfilled: the calculator still works out the runtime, but it warns you and tells you to have the fill checked.
      3. List your appliances. For each appliance on the tank, enter its name, its BTU per hour rating, and the hours per day its burner fires. The BTU rating is printed on the appliance nameplate, usually on a sticker or metal plate near the model and serial number, and in the owner manual. Enter the input rating, the rate at which the appliance burns fuel, not the output rating. Hours are burner hours: the hours the flame is actually lit. A furnace that cycles on and off may fire for 8 hours in a 24-hour day. A water heater may fire for 2 hours. A grill used for one cookout burns for about 1 hour. Leave any row blank to skip it.
      4. Read the headline first, then the detail. The headline gives the runtime in days, or in hours when the tank runs out in less than a day. The cards show the continuous burning time, the gallons in the tank, the gallons burned per day, the energy in the tank, and the days until the refill line. The table breaks the daily burn down by appliance, with each appliance's share of the total. The guidance puts the refill date in plain words, the warnings flag anything that needs attention, and the steps print the full working so you can check every figure by hand.

      The tool updates as you type, so you can try different numbers quickly. Try the example buttons under the form: the grill night shows a 20 lb cylinder feeding one grill for an hour a day, the winter home shows a 500-gallon tank feeding a furnace, water heater, range, and dryer, and the RV weekend shows a 20 lb cylinder feeding a furnace, water heater, and fridge. The three examples show the three shapes the answer takes: a small tank with a light load that lasts weeks, a big tank with a heavy load that lasts about six weeks, and a small tank with a heavy load that lasts two days.

      Read the whole result, not just the headline. Two tanks with the same headline can mean very different things: one may be nearly empty with the refill line already passed, and the other may be full with a month of fuel above the refill line. The days-until-refill card and the refill sentence in the guidance are the numbers that tell you when to pick up the phone. The per-appliance table tells you where the propane goes, which is the number you need when the runtime is shorter than you expected and you want to know why.

      How it works

      The calculator runs four calculations in order: how much propane is in the tank, how much energy that propane holds, how much energy your appliances burn each day, and how many days the energy lasts. Each one uses the result of the one before it, and the steps section on the page prints all four so you can check them against your own arithmetic.

      Step 1: how much propane is in the tank

      Propane tanks are named two different ways, and the naming is the single biggest source of confusion about runtime. Small portable cylinders are rated by the weight of propane they hold: a 20 lb cylinder holds 20 pounds of propane, and a 100 lb cylinder holds 100 pounds. Large stationary tanks are rated by water capacity: a 250-gallon tank is a tank that could hold 250 gallons of water, and a 500-gallon tank could hold 500 gallons of water. Neither name tells you directly how many gallons of propane are inside, and both need one conversion.

      For cylinders, the conversion is the density of liquid propane: 4.24 pounds per gallon at 60 degrees Fahrenheit. Divide the weight rating by 4.24 and you get the gallons: 20 divided by 4.24 is 4.72, so a full 20 lb cylinder holds about 4.7 gallons, and 100 divided by 4.24 is 23.58, so a full 100 lb cylinder holds about 23.6 gallons. The weight rating already is the 80% fill, so the 80% rule is not applied a second time on top of it. This is the point where many online guides go wrong: they take the 4.7 gallons and multiply by 80% again, arriving at 3.7 gallons, which understates a full cylinder by about a fifth. The 20 lb rating is the weight of propane the cylinder is allowed to contain, and that allowance already reflects the 80% limit. The water capacity stamped on the collar of a 20 lb cylinder, usually 47.6 pounds of water, times the filling factor of 0.42, gives 20 pounds: the same answer from the other direction.

      For stationary tanks, the conversion is the 80% fill rule itself. A 250-gallon tank filled to the 80% legal limit holds 200 gallons of propane, and a 500-gallon tank holds 400 gallons. The gauge on a stationary tank reads percent of water capacity, so a full tank reads 80%, a half-full tank by propane reads 40%, and the refill line of 20% on the gauge means 50 gallons in a 250-gallon tank and 100 gallons in a 500-gallon tank. The calculator takes your gauge reading as a percent of water capacity and multiplies it by the tank's water capacity to get the gallons in the tank. For a 20 lb cylinder the water capacity is 5.875 gallons, so a gauge reading of 80% gives 5.875 times 80%, which is 4.7 gallons. For a 100 lb cylinder the water capacity is 29.5 gallons, so 80% gives 23.6 gallons.

      Step 2: how much energy the propane holds

      One gallon of propane carries 91,452 BTU, the higher heating value the US Energy Information Administration publishes in its units and calculators tables. The Propane Education and Research Council publishes 91,502 BTU per gallon and the Department of Energy's Alternative Fuels Data Center publishes 91,420: the three figures agree within 0.1%, and this calculator uses the EIA figure because the EIA is the primary publisher of US energy conversion factors. Multiply the gallons in the tank by 91,452 to get the energy. A full 20 lb cylinder holds 4.7 times 91,452, which is 429,824 BTU. A full 100 lb cylinder holds 23.6 times 91,452, which is 2,158,267 BTU. A full 250-gallon tank holds 200 times 91,452, which is 18,290,400 BTU. A full 500-gallon tank holds 400 times 91,452, which is 36,580,800 BTU.

      That 91,452 BTU is the higher heating value: it counts all the heat the propane could release, including the heat carried away in the water vapor of the exhaust. A conventional non-condensing furnace or water heater does not recover that exhaust heat, so the heat it actually delivers to your home is closer to the lower heating value of about 84,250 BTU per gallon, roughly 8% less. The calculator uses the higher heating value because that is the standard basis for propane energy content, and because appliance BTU ratings are input ratings: a furnace rated at 80,000 BTU per hour burns 80,000 BTU of fuel per hour, whatever it delivers to the house. The runtime is about fuel burned, not heat delivered, so the input basis is the right one. If you want delivered heat instead, our Firewood BTU Calculator compares fuels on the heat they deliver.

      Step 3: how much energy your appliances burn each day

      Each appliance burns its BTU rating for every hour its burner fires. Multiply the BTU per hour by the hours per day to get the BTU per day for that appliance, and add the appliances together for the daily total. A furnace rated at 80,000 BTU per hour firing for 8 hours burns 640,000 BTU a day. A water heater rated at 40,000 BTU per hour firing for 2 hours burns 80,000 BTU a day. A range rated at 65,000 BTU per hour used for 1 hour burns 65,000 BTU a day. A clothes dryer rated at 35,000 BTU per hour running for 1 hour burns 35,000 BTU a day. The four together burn 820,000 BTU a day, which is 820,000 divided by 91,452, or 8.97 gallons a day.

      The hours are the number that most people get wrong, and they matter more than the BTU rating. A furnace nameplate says 80,000 BTU per hour, but the furnace does not fire for 24 hours a day: it cycles on and off as the thermostat calls for heat. In cold weather it may fire for 8 to 12 hours in a day; in mild weather, 2 to 4 hours. A water heater fires only while it recovers temperature after hot water is drawn, typically 1 to 3 hours a day. A range with every burner and the oven on draws its full rating, but a meal uses far less than the full rating for the full hour, so the honest entry for a range is the full rating times the hours at full rating, usually about 1 hour a day. Enter burner hours, not switched-on hours, and the runtime will match your meter. Enter 24 hours for a furnace and the calculator will honestly tell you the tank lasts a third as long as it really does.

      Step 4: how many days the energy lasts

      Divide the energy in the tank by the energy burned each day. A 500-gallon tank holding 36,580,800 BTU, feeding appliances that burn 820,000 BTU a day, lasts 36,580,800 divided by 820,000, which is 44.6 days. The calculator also works out two other runtimes from the same numbers. The continuous runtime divides the energy in the tank by the total BTU per hour with everything running at once: the same tank with appliances totaling 220,000 BTU per hour lasts 36,580,800 divided by 220,000, which is 166.3 hours of continuous burning. And the days until refill divides the energy above the 20% refill line by the daily burn: the 500-gallon tank holds 300 gallons above the 20% line, which is 27,435,600 BTU, so at 820,000 BTU a day the refill call comes in 33.5 days.

      Per-appliance shares come from the same daily figures. Each appliance's share is its BTU per day divided by the total BTU per day, times 100. In the winter home example the furnace burns 640,000 of the 820,000 BTU a day, which is 78.0%. The water heater burns 9.8%, the range 7.9%, and the dryer 4.3%. The shares are worked out by largest remainder, so they always add to exactly 100.0%: when three appliances each use exactly a third, the shares print as 33.4%, 33.3%, and 33.3%, not 33.3% three times with a missing tenth.

      Worked example 1: the winter home

      A 500-gallon tank at 80%, feeding a furnace at 80,000 BTU per hour for 8 hours a day, a water heater at 40,000 BTU per hour for 2 hours, a range at 65,000 BTU per hour for 1 hour, and a clothes dryer at 35,000 BTU per hour for 1 hour.

      • Propane in the tank: 500 x 80% = 400 gallons
      • Energy in the tank: 400 gallons x 91,452 BTU per gallon = 36,580,800 BTU
      • Furnace: 80,000 BTU per hour x 8 hours a day = 640,000 BTU a day
      • Water heater: 40,000 BTU per hour x 2 hours a day = 80,000 BTU a day
      • Range: 65,000 BTU per hour x 1 hour a day = 65,000 BTU a day
      • Dryer: 35,000 BTU per hour x 1 hour a day = 35,000 BTU a day
      • Total daily use: 640,000 + 80,000 + 65,000 + 35,000 = 820,000 BTU a day (8.97 gallons)
      • Runtime: 36,580,800 BTU / 820,000 BTU a day = about 44.6 days
      • Continuous runtime: 36,580,800 BTU / 220,000 BTU per hour = about 166.3 hours
      • Refill at 20%: 500 x (80% - 20%) = 300 gallons above the refill line, 300 x 91,452 = 27,435,600 BTU, about 33.5 days of use
      • Shares: furnace 78.0%, water heater 9.8%, range 7.9%, dryer 4.3%

      The furnace dominates this result: it burns more than three quarters of the propane, so the furnace hours are the number that moves the answer most. If the furnace fires for 12 hours a day instead of 8, the daily total rises to 1,140,000 BTU and the runtime falls to 32.1 days. If it fires for 4 hours, the total falls to 500,000 BTU a day and the runtime rises to 73.2 days. That swing is why the calculator warns you when one appliance uses 75% or more of the propane: check its hours first.

      Worked example 2: the grill night

      A 20 lb cylinder at 80%, feeding a grill at 30,000 BTU per hour for 1 hour a day.

      • Propane in the tank: 5.875 x 80% = 4.7 gallons
      • Energy in the tank: 4.7 gallons x 91,452 BTU per gallon = 429,824 BTU
      • Grill: 30,000 BTU per hour x 1 hour a day = 30,000 BTU a day (0.33 gallons)
      • Runtime: 429,824 BTU / 30,000 BTU a day = about 14.3 days
      • Continuous runtime: 429,824 BTU / 30,000 BTU per hour = about 14.3 hours
      • Refill at 20%: 5.875 x (80% - 20%) = 3.53 gallons above the refill line, 3.53 x 91,452 = 322,826 BTU, about 10.8 days of use

      Fourteen cookouts of an hour each from one cylinder is the right order of magnitude for a grill, and it is the number that surprises people most: a 20 lb cylinder looks substantial, but it holds less than 5 gallons, and a 30,000 BTU grill burns a third of a gallon an hour. If the grill runs for 2 hours a day, the runtime halves to 7.2 days. If it is a smaller grill at 12,000 BTU per hour, the runtime stretches to 35.8 days at an hour a day.

      Worked example 3: the RV weekend

      A 20 lb cylinder at 80%, feeding an RV furnace at 30,000 BTU per hour for 6 hours a day, a water heater at 12,000 BTU per hour for 1 hour, and a fridge at 1,500 BTU per hour for 12 hours.

      • Propane in the tank: 5.875 x 80% = 4.7 gallons
      • Energy in the tank: 4.7 gallons x 91,452 BTU per gallon = 429,824 BTU
      • Furnace: 30,000 BTU per hour x 6 hours a day = 180,000 BTU a day
      • Water heater: 12,000 BTU per hour x 1 hour a day = 12,000 BTU a day
      • Fridge: 1,500 BTU per hour x 12 hours a day = 18,000 BTU a day
      • Total daily use: 180,000 + 12,000 + 18,000 = 210,000 BTU a day (2.3 gallons)
      • Runtime: 429,824 BTU / 210,000 BTU a day = about 2 days
      • Continuous runtime: 429,824 BTU / 43,500 BTU per hour = about 9.9 hours
      • Refill at 20%: 5.875 x (80% - 20%) = 3.53 gallons above the refill line, 3.53 x 91,452 = 322,826 BTU, about 1.5 days of use

      Two days is the honest answer for a cold RV weekend on one cylinder, and it is why RVs carry two cylinders with an automatic changeover regulator: the second cylinder doubles the weekend to four days. The fridge is almost free in this picture at 18,000 BTU a day, and the furnace is nearly the whole load at 85.7% of the daily burn. Turn the furnace down or shorten its hours and the weekend stretches fast.

      What your result means

      Runtime in days versus continuous hours

      The headline runtime is the days the tank lasts at your daily pattern: the furnace firing 8 hours, the water heater 2 hours, the range 1 hour. The continuous runtime is a different number: how long the tank lasts with every appliance burning at full rating without stopping. For the winter home the two are 44.6 days and 166.3 hours. The continuous figure is useful for one question only: how long the tank lasts in an emergency when everything runs at once, such as a power outage with the generator and the furnace both running. For planning a refill, use the days figure and the days-until-refill card. For sizing a generator load, our Home Generator Size Calculator works out what the generator must carry.

      The refill line, and why it is 20%

      Propane suppliers ask you to call when the gauge reads 20%, and the calculator builds its refill guidance around that line. There are three reasons. First, delivery takes time: a supplier may need several days to schedule a truck, and in cold weather the wait can be longer, so the 20% reserve is the fuel that covers the gap between the call and the delivery. A 500-gallon tank at 20% still holds 100 gallons, which at the winter home rate of 8.97 gallons a day is 11.2 days of fuel: enough for a delivery, but not enough to ignore. Second, a tank that runs completely dry lets air and moisture into the system, and the supplier must do a leak check before the system can run again, which adds cost and delay. Third, the gauge is least accurate at the bottom of its range, so 20% on the dial may be less in the tank. The calculator tells you the days until the 20% line and warns you when the gauge is already at or below it. If your supplier recommends a higher refill line, such as 30% in winter, treat the 20% date as the latest safe call, not the earliest.

      The biggest user

      The per-appliance table answers the question that follows every short runtime: where is it all going? In most homes the furnace is the answer, usually 70% to 85% of the daily burn in winter. In summer, with the furnace off, the water heater takes over, and a pool heater can dwarf everything: a 400,000 BTU pool heater running 2 hours a day burns 800,000 BTU, more than the whole winter home example. The guidance names the biggest user and its share, and a warning appears when one appliance uses 75% or more, because that appliance's hours are the number to check first when the answer looks wrong. Check the nameplate rating, then the hours: a furnace entered at 24 hours a day instead of 8 triples its share and cuts the runtime to a third.

      When the tank is empty or overfilled

      A gauge reading of 0 means an empty tank, and the calculator says so plainly: there is no runtime left, and the guidance tells you to call for a refill now. It also shows what your appliances would burn once the tank is filled again, so you can plan the next fill. A gauge reading above 80% means the tank is overfilled, past the legal fill limit. The calculator still works out the runtime from the gallons the gauge implies, but it warns you not to add more propane and to ask your supplier to check the fill. An overfilled tank leaves too little vapor space for the liquid to expand as it warms, and the pressure relief valve may vent propane to protect the tank.

      Tank sizes compared

      The four sizes this calculator covers span a factor of 85 in energy: a full 500-gallon tank holds 36,580,800 BTU, and a full 20 lb cylinder holds 429,824 BTU. The table below shows each size with its water capacity, its full propane fill, the energy in a full tank, and how long a full tank lasts at two standard loads: a winter home burning 820,000 BTU a day, and cooking plus hot water burning 145,000 BTU a day. Your own loads will differ, but the table shows the scale of each size at a glance.

      Tank sizeWater capacityPropane when fullEnergy when fullDays, winter homeDays, cooking and hot water
      20 lb cylinder5.9 gallons4.7 gallons429,824 BTU0.5 days3.0 days
      100 lb cylinder29.5 gallons23.6 gallons2,158,267 BTU2.6 days14.9 days
      250-gallon tank250 gallons200 gallons18,290,400 BTU22.3 days126.1 days
      500-gallon tank500 gallons400 gallons36,580,800 BTU44.6 days252.3 days

      The winter home column is the sobering one. A 20 lb cylinder feeding a whole house lasts half a day, and a 100 lb cylinder lasts 2.6 days: cylinders are for grills, heaters, and RVs, not for heating a house. A 250-gallon tank lasts about three weeks in deep winter, which is why suppliers schedule 250-gallon customers for regular winter deliveries. A 500-gallon tank lasts about six weeks, which is why it is the standard size for a home that heats with propane: one fill covers a cold month with margin. The cooking and hot water column shows the other end: without space heating, a 500-gallon tank lasts 252.3 days, more than eight months, because cooking and hot water together burn only 145,000 BTU a day.

      Weight is worth knowing when a cylinder has to be carried. Propane weighs 4.24 pounds per gallon, so a full 20 lb cylinder carries 19.9 pounds of propane plus about 17 to 18 pounds of steel, for a total of about 37 pounds. A full 100 lb cylinder carries 100.1 pounds of propane plus about 70 pounds of steel, for a total near 170 pounds: a two-person lift, or a hand truck. A full 250-gallon tank holds 848 pounds of propane, and a full 500-gallon tank holds 1,696 pounds, which is why stationary tanks are filled in place by a delivery truck and never moved once set.

      Typical appliance ratings

      Every BTU rating below is a typical figure for planning. Your appliance's real rating is on its nameplate, and the nameplate governs: a furnace nameplate may read 60,000, 80,000, 100,000, or 120,000 BTU per hour, and using the wrong one changes the runtime in proportion. Use the table to fill in a rating you cannot find, then replace it with the nameplate figure when you can. Gallons per hour is the rating divided by 91,452. Gallons per day uses the typical hours shown, which are burner hours, not switched-on hours.

      ApplianceTypical BTU per hourGallons per hourTypical hours a dayGallons a day
      Furnace80,0000.8787.0
      Water heater, tank type40,0000.4420.87
      Water heater, tankless180,0001.9711.97
      Range and oven, all on65,0000.7110.71
      Clothes dryer35,0000.3810.38
      Gas fireplace30,0000.3330.98
      Grill30,0000.3310.33
      Generator90,0000.9810.98
      Pool heater400,0004.3728.75
      RV furnace30,0000.3361.97
      RV water heater12,0000.1310.13
      RV fridge, absorption1,5000.02120.20

      Three ratings in the table deserve a second look. The tankless water heater's 180,000 BTU per hour looks alarming next to the tank heater's 40,000, but the tankless heater fires only while hot water flows, about 1 hour a day, while the tank heater fires for 2 hours to hold its tank hot around the clock: the daily burn is 1.97 gallons against 0.87, a real difference, but not the fourfold gap the ratings suggest. If you are choosing between them, our Tankless Water Heater Size Calculator sizes a tankless unit by flow and temperature rise. The generator's 90,000 BTU per hour is a mid-size portable unit at moderate load: a generator under heavy load burns far more, and one at light load far less, so enter the rating that matches your load, or check it against the generator's fuel consumption table. The pool heater's 400,000 BTU per hour is the largest rating in the table by a wide margin: two hours a day of pool heating burns 8.75 gallons, more than a furnace running all day in winter.

      Two more appliances are worth mentioning because they confuse people. A mini-split heat pump uses no propane at all, so it does not belong in this calculator: if a heat pump carries part of your heating, enter only the furnace hours the heat pump does not cover. Our Mini-Split BTU Sizer sizes a heat pump for a room. And a pilot light, the small standing flame on older appliances, burns about 100 BTU per hour around the clock, which is 2,400 BTU a day, or 0.03 gallons: small, but over a year it is about 10 gallons, which is why modern appliances use electronic ignition instead.

      Common mistakes

      Reading the tank name as the propane inside

      A 250-gallon tank does not hold 250 gallons of propane, and a 500-gallon tank does not hold 500 gallons. The name is the water capacity, and the legal fill is 80% of it: 200 and 400 gallons. A runtime worked out on 500 gallons instead of 400 overstates the answer by 25%, which is the difference between a refill booked in time and a tank that runs dry. The same mistake runs the other way on cylinders: a 20 lb cylinder is not a 20-gallon anything, and it holds 4.7 gallons, not 20.

      Applying the 80% rule twice to a cylinder

      The 80% rule applies to water capacity. A cylinder's weight rating already reflects it: the 20 lb rating is the weight of propane the cylinder is allowed to contain at the 80% fill, and the water capacity stamped on the collar times the 0.42 filling factor gives the same 20 pounds. Multiplying the 4.7 gallons by 80% again gives 3.7 gallons, which understates a full cylinder by about a fifth and shortens every runtime worked out from it. If you are converting from weight, divide by 4.24 and stop. If you are converting from water capacity, multiply by 80% and stop. Never do both.

      Assuming an exchange cylinder is full

      Cylinders from an exchange cage are often filled to 15 pounds, not 20, which is 3.54 gallons instead of 4.7. A grill runtime worked out on a full 20 lb cylinder overstates an exchange cylinder by a third: 14.3 days at an hour a day becomes 10.8 days, because 3.54 gallons holds 323,740 BTU and 323,740 divided by 30,000 is 10.8. If your cylinder came from an exchange, enter a gauge reading of 60% instead of 80%: 60% of the 5.875-gallon water capacity is 3.53 gallons, which matches the 15 lb fill. A cylinder filled at a refill station is filled to the full 20 pounds, and the gauge reading of 80% is right for it.

      Entering switched-on hours instead of burner hours

      A furnace is switched on all winter, but its burner fires only when the thermostat calls for heat. A water heater is switched on all year, but its burner fires only while it recovers temperature. Entering 24 hours for either one overstates the daily burn by a factor of three to twelve and understates the runtime by the same factor. If you do not know the burner hours, start with 8 hours a day for a furnace in cold weather, 2 hours for a water heater, and 1 hour for a range, then adjust from your delivery history: if the tank lasts twice as long as the calculator says, your burner hours are about half what you entered.

      Forgetting the refill line

      A runtime of 44.6 days does not mean you can ignore the tank for 44 days. The refill call comes at 20%, which for the winter home is 33.5 days in, and delivery takes days after that. Book the refill when the calculator's refill date arrives, not when the tank is empty. A tank that runs dry costs more than a delivery: the supplier must purge air from the lines and do a leak check before relighting, and in cold weather the house cools while you wait.

      Using one season's hours for the whole year

      Furnace hours swing with the weather: 12 hours a day in a cold snap, 8 in an average winter week, 2 in mild weather, 0 in summer. A runtime worked out on January hours understates a March tank, and a runtime worked out on March hours overstates a January tank. Run the calculator twice, once with winter hours and once with mild-weather hours, and you have the range the tank actually lives in. For the winter home, furnace hours of 12 give a runtime of 32.1 days, and furnace hours of 4 give 73.2 days: the same tank, the same appliances, a factor of two apart.

      Comparing propane with other fuels by the gallon

      A gallon of propane is not a gallon of heating oil. Propane carries 91,452 BTU per gallon; heating oil carries 138,500 BTU per gallon, about half as much again. A home that burns 100 gallons of heating oil a month needs about 151 gallons of propane for the same heat, before efficiency differences. Compare fuels by the BTU, not by the gallon, and by the dollar per million BTU, not the dollar per gallon. Our Fuel Cost Calculator works out trip fuel cost, and the same per-BTU thinking applies to heating fuel: divide the price per gallon by the BTU per gallon to get the price per unit of heat.

      Use cases

      The grill owner

      One cylinder, one grill, one question: how many cookouts before the tank runs out? Enter the grill rating, usually 30,000 BTU per hour for a three-burner grill, and the hours per cookout, usually 1. At an hour a day, a full cylinder lasts 14.3 days of cookouts. At two cookouts a week, that is seven weeks. Weigh the cylinder if you want to check the gauge: a full cylinder weighs about 37 pounds, an empty one about 17, so a cylinder that weighs 27 pounds is half full.

      The RV traveler

      Two cylinders, three appliances, and a weekend to plan. Enter the RV furnace at 30,000 BTU per hour, the water heater at 12,000, and the fridge at 1,500, with the hours each one fires. One cylinder lasts 2 days at the worked example's cold-weather hours, so a three-day weekend needs the second cylinder or a refill stop. In mild weather, with the furnace firing 2 hours instead of 6, the daily total falls to 90,000 BTU and one cylinder lasts 4.8 days. Our Camp Stove Fuel Calculator plans fuel for a camp stove trip the same way, by burner rating and hours.

      The cabin owner

      A 100 lb cylinder feeding a furnace and a water heater, visited on weekends. The cylinder lasts 2.6 days at the winter home rate, which is not enough for a cold week, so cabin owners usually run two 100 lb cylinders with a changeover regulator, or step up to a 250-gallon tank. Enter the hours for a weekend visit, not for a full week, and the calculator tells you the weekends per fill: at 210,000 BTU a day, a full 100 lb cylinder lasts 10.3 days of use, which is five weekends of two days each.

      The home on a 500-gallon tank

      The standard case: a furnace, a water heater, a range, and a dryer on a 500-gallon tank, with a supplier who delivers on a schedule. Run the calculator at the start of winter with your January hours, and again in spring with mild-weather hours, and you know the delivery window: 32.1 days in deep winter, 73.2 days in mild weather, 44.6 days at the average 8-hour furnace day. Give the supplier the winter figure, and the truck comes before the tank reaches 20%.

      The generator owner

      A power outage puts the generator on the same tank as the house, and the generator is a heavy drinker: 90,000 BTU per hour at moderate load is 0.98 gallons an hour, so 8 hours of generator running burns 7.87 gallons. Add the generator as an appliance with its outage hours, and the calculator shows the outage runtime honestly. A 500-gallon tank at 80% feeding the winter home plus a generator running 8 hours a day burns 820,000 plus 720,000, which is 1,540,000 BTU a day, and lasts 23.8 days instead of 44.6. That is the number to plan around before storm season, not during it.

      The landlord and the property manager

      A rental property on propane needs the tank checked between tenants, and the runtime tells you whether the tank covers the vacancy. Enter the appliances the property actually has, with the hours a vacant property uses: the furnace at a setback temperature firing 4 hours a day, the water heater at 1 hour. A 250-gallon tank at 50% holds 125 gallons, which is 11,431,500 BTU, and at 360,000 BTU a day it lasts 31.8 days: enough for a month-long vacancy, not enough for two. If an appliance is failing and the choice is repair or replace, our Appliance Repair vs Replace Calculator compares the costs.

      Safety notes

      Propane is safe to use when the system is sound and the rules are followed, and dangerous when they are not. The 80% fill rule exists because liquid propane expands as it warms: a tank filled to the brim on a cold morning becomes over-pressured by afternoon, and the pressure relief valve vents propane to protect the tank. Never ask a supplier to fill past 80%, and never fill a cylinder yourself from another cylinder. Cylinders made after September 1998 carry an overfill prevention device, a float valve that closes when the liquid reaches 80%, and since April 2002 cylinders from 4 to 40 pounds must have one to be refilled. You can recognize one by the triangular handwheel on the valve. Larger tanks carry a fixed liquid-level gauge, a small valve at the 80% line that the delivery driver opens during filling to confirm the level.

      Never store a propane cylinder indoors, in a garage, or in a basement. Propane vapor is heavier than air, so a leak pools in low places instead of dispersing, and a spark can ignite it. Store cylinders upright, outdoors, in a ventilated spot, away from heat and ignition sources. Never use a propane heater or grill indoors: the carbon monoxide is colorless and odorless, and it kills. If you smell propane, the rotten-cabbage odor added to it, leave the building, do not switch lights or appliances on or off, and call your supplier or the fire department from outside. Do not try to find the leak yourself.

      A tank that has run dry needs more than a refill. Air and moisture get into the lines, and the supplier must purge the system and do a leak check before relighting any appliance. That is why the 20% refill line matters: it keeps the system under pressure and the air out. If your tank does run dry, turn off all appliance valves, close the tank valve, and call the supplier: do not relight anything yourself until the system has been checked. Keep the area around a stationary tank clear of leaves, snow, and debris, and keep the tank valve and regulator accessible in all weather.

      Frequently asked questions

      How long does a 20 lb propane tank last?

      It depends on what it feeds. A 20 lb cylinder holds 4.7 gallons, which is 429,824 BTU. A grill at 30,000 BTU per hour used for 1 hour a day empties it in 14.3 days. An RV furnace at 30,000 BTU per hour firing for 6 hours a day empties it in 2.4 days. A patio heater at 40,000 BTU per hour running 3 hours an evening empties it in 3.6 days. Enter your appliance rating and hours above for your own number: the runtime is the 429,824 BTU in the tank divided by the BTU you burn each day.

      How many gallons are in a 20 lb propane tank?

      About 4.7 gallons. Liquid propane weighs 4.24 pounds per gallon at 60 degrees Fahrenheit, so 20 pounds divided by 4.24 is 4.72 gallons, stated as 4.7. The 20 lb rating is the weight of propane the cylinder is allowed to contain, and it already reflects the 80% fill limit, so the 80% rule is not applied a second time. An exchange cylinder is often filled to 15 pounds instead of 20, which is 3.54 gallons. A 100 lb cylinder holds about 23.6 gallons by the same arithmetic.

      Why are propane tanks only filled to 80%?

      Liquid propane expands as it warms, and the 20% vapor space above the liquid gives it room to expand without over-pressuring the tank. The 80% limit is part of NFPA 58, the Liquefied Petroleum Gas Code, and it is enforced by hardware: cylinders carry an overfill prevention device, a float valve that closes when the liquid reaches 80%, and larger tanks carry a fixed liquid-level gauge at the 80% line. A tank filled past 80% on a cold morning can vent propane through its pressure relief valve by afternoon. The gauge on a stationary tank reads percent of water capacity, so a full tank reads 80%, not 100%.

      How much propane does a furnace use per day?

      A furnace rated at 80,000 BTU per hour firing for 8 hours burns 640,000 BTU a day, which is 7.0 gallons. Over a 30-day month that is 209.9 gallons. The hours matter more than the rating: the same furnace firing for 4 hours burns 3.5 gallons a day, and firing for 12 hours burns 10.5 gallons. Furnace hours depend on the weather, the thermostat setting, and the insulation of the house, so check your own hours against delivery history: if a 500-gallon tank lasts 44.6 days at your use, your daily burn is about 8.97 gallons, and the furnace is most of it.

      When should I refill my propane tank?

      Call when the gauge reads 20%. The 20% reserve covers the days between the call and the delivery, and it keeps the system under pressure so air and moisture stay out of the lines. A 500-gallon tank at 20% still holds 100 gallons, which at the winter home rate of 8.97 gallons a day is 11.2 days of fuel. In cold weather, call earlier: delivery waits grow when every customer calls at once. This calculator tells you the days until the 20% line, so you can book the delivery before the gauge gets there. Never let the tank run dry: the supplier must do a leak check before the system can run again.

      How do I work out how long my propane tank will last?

      Multiply the gallons in the tank by 91,452 to get the BTU, then divide by the BTU your appliances burn each day. A 500-gallon tank at 80% holds 400 gallons, which is 36,580,800 BTU. Appliances burning 820,000 BTU a day empty it in 44.6 days. Each appliance's daily burn is its BTU per hour rating times the hours its burner fires: a furnace at 80,000 BTU per hour for 8 hours burns 640,000 BTU a day. Add the appliances together for the daily total. The calculator above does the whole chain for you, including the per-appliance shares and the refill date.

      What happens if my propane tank runs empty?

      The appliances stop, and the system needs more than a refill before it can run again. Air and moisture get into the lines when the pressure drops to zero, so the supplier must purge the system and do a leak check before relighting anything. That adds cost and delay, and in cold weather the house cools while you wait. Turn off all appliance valves, close the tank valve, and call the supplier. Do not relight anything yourself until the system has been checked. The 20% refill line exists to prevent exactly this: call at 20% and the tank never runs dry.

      Does cold weather change how long propane lasts?

      Cold weather shortens runtime in two ways. First, and by far the larger effect, the furnace fires longer: furnace hours rise from 4 a day in mild weather to 8 or 12 in a cold snap, which can halve the runtime of a tank. A 500-gallon tank that lasts 73.2 days at 4 furnace hours lasts 32.1 days at 12 hours. Second, propane vaporizes more slowly in extreme cold, and a small cylinder feeding a large appliance can struggle to deliver enough vapor, though this affects delivery rate rather than total energy. Run the calculator with winter hours for the cold-season answer and with mild-weather hours for the rest of the year.

      Sources

      Energy content: US Energy Information Administration, Energy units and calculators explained, sample Btu conversion factors, propane 1 gallon = 91,452 Btu, re-verified 21 November 2026 from the EIA page at eia.gov/energyexplained/units-and-calculators. The Propane Education and Research Council publishes 91,502 BTU per gallon and the Department of Energy's Alternative Fuels Data Center publishes 91,420; the three agree within 0.1% and the EIA figure governs here as the primary publisher's factor.

      Fill rule and overfill prevention: NFPA 58, Liquefied Petroleum Gas Code, requiring overfill prevention devices on cylinders from 4 to 40 pounds propane capacity since 1 April 2002, with the device closing when the liquid reaches 80% of capacity, as summarized by El Dorado County from the NFPA fact sheet at eldoradocounty.ca.gov, re-verified 21 November 2026. Stationary tanks use a fixed liquid-level gauge at the 80% line under the same code.

      Tank capacities: cylinder gallons from the propane density of 4.24 pounds per gallon at 60 degrees Fahrenheit, 20 lb divided by 4.24 equals 4.72 gallons and 100 lb divided by 4.24 equals 23.58 gallons; stationary tank fills from the 80% rule, 250 gallons times 80% equals 200 gallons and 500 gallons times 80% equals 400 gallons. The 20 lb cylinder water capacity of 47.6 pounds times the 0.42 filling factor gives the same 20-pound maximum fill, confirming the weight rating already reflects the 80% limit. Appliance BTU ratings in the tables are typical planning figures from published appliance rating ranges; the nameplate on your appliance is the governing figure for your own calculation.